PAs3S3 cage as a new building block in copper halide coordination polymers

First examples of the coordination chemistry of the PAs(3)S(3) cage were obtained from solutions of PAs(3)S(3)·W(CO)(5) (1) in CH(2)Cl(2) or CH(2)Cl(2)/toluene and CuX (X = Cl, Br, I) in MeCN through interdiffusion techniques. Crystals of [Cu(PAs(3)S(3))(4)]X (2, X = Cl; 3, X = Br) and [(Cu(2)I)(PAs(3)S(3))(3)]I (4) were obtained and characterized by Raman spectroscopy (2) and single-crystal X-ray crystallography. The solid-state structures reveal an unexpected coordination versatility of the PAs(3)S(3) ligand: apical phosphorus and bridging sulfur atoms interact with copper, while As···X interactions determine the dimensionality of the frameworks. The structures of 2 and 3 contain tetrahedral [(PAs(3)S(3))(4)Cu](+) cations as secondary building units (SBUs), which are arranged by interactions with Cl(-) or Br(-) anions into two- and three-dimensional substructures. These interpenetrate into a (2D + 3D) polycatenane. Compound 4 is built up by a one-dimensional [(Cu(2)I)(PAs(3)S(3))(3)](n)(n+) ribbon with PAs(3)S(3) cages as P,S-linkers. The As atoms of the exo PAs(3)S(4) linkers interact with iodide counterions (3.35 < d(As-I) < 3.59 ?). The resulting two-dimensional layer is organized by weak As···I interactions (d(As-I = 3.87 ?) into a 3D network.     

Extending the coordination chemistry of molecular P(4)S(3): the polymeric Ag(P(4)S(3))(+) and Ag(P(4)S(3))(2)(+) cations

Upon reacting P(4)S(3) with AgAl(hfip)(4) and AgAl(pftb)(4) [hfip = OC(H)(CF(3))(2); pftb = OC(CF(3))(3)], the compounds Ag(P(4)S(3))Al(hfip)(4) 1 and Ag(P(4)S(3))(2)(+)[Al(pftb)(4)](-) 2 formed in CS(2) (1) or CS(2)/CH(2)Cl(2) (2) solution. Compounds 1 and 2 were characterized by single-crystal X-ray structure determinations, Raman and solution NMR spectroscopy, and elemental analyses. One-dimensional chains of [Ag(P(4)S(3))(x)](infinity) (x = 1, 1; x = 2, 2) formed in the solid state with P(4)S(3) ligands that bridge through a 1,3-P,S, a 2,4-P,S, or a 3,4-P,P eta(1) coordination to the silver ions. Compound 2 with the least basic anion contains the first homoleptic metal(P(4)S(3)) complex. Compounds 1 and 2 also include the long sought sulfur coordination of P(4)S(3). Raman spectra of 1 and 2 were assigned on the basis of DFT calculations of related species. The influence of the silver coordination on the geometry of the P(4)S(3) cage is discussed, additionally aided by DFT calculations. Consequences for the frequently observed degradation of the cage are suggested. An experimental silver ion affinity scale based on the solid-state structures of several weak Lewis acid base adducts of type (L)AgAl(hfip)(4) is given. The affinity of the ligand L to the silver ion increases according to P(4) < CH(2)Cl(2) < P(4)S(3) < S(8) < 1,2-C(2)H(4)Cl(2) < toluene.     

Synthesis and properties of rhenium carbonyl complexes of alpha,alpha'-bis[(1-pyrenyl)pyrazol-1-yl]alkane ligands

The reaction between (1-acetyl)pyrene and dimethylformamide dimethylacetal followed by condensation of the resulting product mixture with hydrazine affords 3(5)-(1-pyrenyl)pyrazole (2) in good yield. The easily separable bis[(1-pyrenyl)pyrazole]methane derivatives CH(2)(3-pz(pyrene))(2) (3a, pz = pyrazolyl ring) and CH(2)(3-pz(pyrene))(5-pz(pyrene)) (3b) were prepared by metathetical reactions between pyrazole and CH(2)Cl(2), while CH((n)()Pr)(pz(pyrene))(2) (4) was prepared by transamination of 2 with butyraldehyde diethylacetal. Compounds 2-4 are luminescent under irradiation with UV light and have pyrenyl monomer-based emissions centered near 400 nm. Compounds 3a and 4 each react with Re(CO)(5)Br in a 1:1 molar ratio to form highly insoluble complexes Re(CO)(3)Br[(pz(pyrene))(2)CH(2)] (5) and Re(CO)(3)Br[(pz(pyrene))(2)CH((n)()Pr)] (6). Complex Re(CO)(3)Br[(pz)(2)CMe(2)] (7) was also prepared. X-ray structural studies of 6 show extensive pi-stacking of pyrenyl groups to form two-dimensional sheets. Pulsed field gradient spin-echo NMR (PGSE-NMR) experiments show that the complexes are monomeric in tetrachloroethane. Variable-temperature, difference NOE and 2-D NMR experiments demonstrate that isomers are present in solution that differ by restricted rotation about the pyrazolyl-pyrenyl bond. The pyrenyl-based emissions centered near 400 nm are quenched by complexation to the Re(CO)(3)Br moiety in 5 and 6.     

Electronic structures of ruthenium and osmium complexes of 9,10-phenanthrenequinone

The reaction of 9,10-phenanthrenequinone (PQ) with [M(II)(H)(CO)(X)(PPh(3))(3)] in boiling toluene leads to the homolytic cleavage of the M(II)-H bond, affording the paramagnetic trans-[M(PQ)(PPh(3))(2)(CO)X] (M = Ru, X = Cl, 1; M = Os, X = Br, 3) and cis-[M(PQ)(PPh(3))(2)(CO)X] (M = Ru, X = Cl, 2; M = Os, X = Br, 4) complexes. Single-crystal X-ray structure determinations of 1, 2·toluene, and 4·CH(2)Cl(2), EPR spectra, and density functional theory (DFT) calculations have substantiated that 1-4 are 9,10-phenanthrenesemiquinone radical (PQ(?-)) complexes of ruthenium(II) and osmium(II) and are defined as trans-[Ru(II)(PQ(?-))(PPh(3))(2)(CO)Cl] (1), cis-[Ru(II)(PQ(?-))(PPh(3))(2)(CO)Cl] (2), trans-[Os(II)(PQ(?-))(PPh(3))(2)(CO) Br] (3), and cis-[Os(II)(PQ(?-))(PPh(3))(2)(CO)Br] (4). Two comparatively longer C-O [average lengths: 1, 1.291(3) ?; 2·toluene, 1.281(5) ?; 4·CH(2)Cl(2), 1.300(8) ?] and shorter C-C lengths [1, 1.418(5) ?; 2·toluene, 1.439(6) ?; 4·CH(2)Cl(2), 1.434(9) ?] of the OO chelates are consistent with the presence of a reduced PQ(?-) ligand in 1-4. A minor contribution of the alternate resonance form, trans- or cis-[M(I)(PQ)(PPh(3))(2)(CO)X], of 1-4 has been predicted by the anisotropic X- and Q-band electron paramagnetic resonance spectra of the frozen glasses of the complexes at 25 K and unrestricted DFT calculations on 1, trans-[Ru(PQ)(PMe(3))(2)(CO)Cl] (5), cis-[Ru(PQ)(PMe(3))(2)(CO)Cl] (6), and cis-[Os(PQ)(PMe(3))(2)(CO)Br] (7). However, no thermodynamic equilibria between [M(II)(PQ(?-))(PPh(3))(2)(CO)X] and [M(I)(PQ)(PPh(3))(2)(CO)X] tautomers have been detected. 1-4 undergo one-electron oxidation at -0.06, -0.05, 0.03, and -0.03 V versus a ferrocenium/ferrocene, Fc(+)/Fc, couple because of the formation of PQ complexes as trans-[Ru(II)(PQ)(PPh(3))(2)(CO)Cl](+) (1(+)), cis-[Ru(II)(PQ)(PPh(3))(2)(CO)Cl](+) (2(+)), trans-[Os(II)(PQ)(PPh(3))(2)(CO)Br](+) (3(+)), and cis-[Os(II)(PQ)(PPh(3))(2)(CO)Br](+) (4(+)). The trans isomers 1 and 3 also undergo one-electron reduction at -1.11 and -0.96 V, forming PQ(2-) complexes trans-[Ru(II)(PQ(2-))(PPh(3))(2)(CO)Cl](-) (1(-)) and trans-[Os(II)(PQ(2-))(PPh(3))(2)(CO)Br](-) (3(-)). Oxidation of 1 by I(2) affords diamagnetic 1(+)I(3)(-) in low yields. Bond parameters of 1(+)I(3)(-) [C-O, 1.256(3) and 1.258(3) ?; C-C, 1.482(3) ?] are consistent with ligand oxidation, yielding a coordinated PQ ligand. Origins of UV-vis/near-IR absorption features of 1-4 and the electrogenerated species have been investigated by spectroelectrochemical measurements and time-dependent DFT calculations on 5, 6, 5(+), and 5(-).     

Gyroscope-like molecules consisting of three-spoke stators that enclose "switchable" neutral dipolar rhodium rotators; reversible cycling between faster and slower rotating Rh(CO)I and Rh(CO)2I species

trans-Rh(CO)(Cl)(P((CH(2))(14))(3)P) is prepared from trans-Rh(CO)(Cl)(P((CH(2))(6)CH[double bond, length as m-dash]CH(2))(3))(2) by a metathesis/hydrogenation sequence, and converted by substitution or addition reactions to Rh(CO)(I), Rh(CO)(2)(I), Rh(CO)(NCS), and Rh(CO)(Cl)(Br)(CCl(3)) species; the Rh(CO)(Cl) and Rh(CO)(I) moieties rapidly rotate within the cage-like diphosphine, but the other rhodium moieties do not.     

Syntheses of chromium pentacarbonyl derivatives of arsenic(V) and antimony(V). contrasting chemical reactivity with organic halogen derivatives

We have synthesized a new series of chromium-group 15 dihydride and hydride complexes [H(2)As(Cr(CO)(5))(2)](-) (1) and [HE(Cr(CO)(5))(3)](2)(-) (E = As, 2a; E = Sb, 2b), which represent the first examples of group 6 complexes containing E-H fragments. The contrasting chemical reactivity of 2a and 2b with organic halogen derivatives is demonstrated. The reaction of 2a with RBr (R = PhCH(2), HC triple bond CCH(2)) produces the RX addition products [(R)(Br)As(Cr(CO)(5))(2)](-) (R = PhCH(2), 3; R = C(3)H(3), 4), while the treatment of 2b with RX (RX = PhCH(2)Br or HC triple bond CCH(2)Br, CH(3)(CH(2))(5)C(O)Cl) forms the halo-substituted complexes [XSb(Cr(CO)(5))(3)](2-) (X = Br, 5; X = Cl, 6). Moreover, the dihaloantimony complexes [XX'Sb(Cr(CO)(5))(2)](-) can be obtained from the reaction of 2b with the appropriate organic halides. In this study, a series of organoarsenic and antimony chromium carbonyl complexes have been synthesized and structurally characterized and the role of the main group on the formation of the resultant complexes is also discussed.     

Syntheses, structures, and reactivity of new pentamethylcyclopentadienyl-rhodium(III) and -iridium(III) 4-acyl-5-pyrazolonate complexes

New [CpM(Q)Cl] complexes (M = Rh or Ir, Cp = pentamethylcyclopentadienyl, HQ = 1-phenyl-3-methyl-4R(C=O)-pyrazol-5-one in general, in detail HQ(Me), R = CH(3); HQ(Et), R = CH(2)CH(3); HQ(Piv), R = CH(2)-C(CH(3))(3); HQ(Bn), R = CH(2)-(C(6)H(5)); HQ(S), R = CH-(C(6)H(5))(2)) have been synthesized from the reaction of [CpMCl(2)](2) with the sodium salt, NaQ, of the appropriate HQ proligand. Crystal structure determinations for a representative selection of these [CpM(Q)Cl] compounds show a pseudo-octahedral metal environment with the Q ligand bonded in the O,O'-chelating form. In each case, two enantiomers (S(M)) and (R(M)) arise, differing only in the metal chirality. The reaction of [CpRh(Q(Bn))Cl] with MgCH(3)Br produces only halide exchange with the formation of [CpRh(Q(Bn))Br]. The [CpRh(Q)Cl] complexes react with PPh(3) in dichloromethane yielding the adducts CpRh(Q)Cl/PPh(3) (1:1) which exist in solution in two different isomeric forms. The interaction of [CpRh(Q(Me))Cl] with AgNO(3) in MeCN allows generation of [CpRh(Q(Me))(MeCN)]NO(3).3H(2)O, whereas the reaction of [CpRh(Q(Me))Cl] with AgClO(4) in the same solvent yields both [CpRh(Q(Me))(H(2)O)]ClO(4) and [CpRh(Cl)(H(2)O)(2)]ClO(4); the H(2)O molecules derive from the not-rigorously anhydrous solvents or silver salts.     

Nickel-manganese sulfido carbonyl cluster complexes. synthesis, structure, and properties of the unusual paramagnetic complexes Cp2Ni2Mn(CO)3(mu 3-E)2, E = S, Se

The reaction of Mn(2)(CO)(7)(mu-S(2)) with [CpNi(CO)](2) yielded the paramagnetic new compound Cp(2)Ni(2)Mn(CO)(3)(mu(3)-S)(2) (1) and a new hexanuclear metal product Cp(2)Ni(2)Mn(4)(CO)(14)(mu(6)-S(2))(mu(3)-S)(2) (2). Structurally, compound 1 contains two triply bridging sulfido ligands on opposite sides of an open Ni(2)Mn triangular cluster. EPR and temperature-dependent magnetic susceptibility measurements of 1 show that it contains one unpaired electron. The electronic structure of 1 was determined by Fenske-Hall molecular orbital calculations which show that the unpaired electron occupies a low lying antibonding orbital delocalized unequally across the three metal atoms. The selenium homologue Cp(2)Ni(2)Mn(CO)(3)(mu(3)-Se)(2) (3) was obtained from the reaction of a mixture of Mn(2)(CO)(10) and [CpNi(CO)](2) with elemental selenium and Me(3)NO.2H(2)O. It also has one unpaired electron. Compound 1 reacted with elemental sulfur to yield the dinickeldimanganese compound, Cp(2)Ni(2)Mn(2)(CO)(6)(mu(4)-S(2))(mu(4)-S(5)), 4, which can also be made from the reaction of Mn(2)(CO)(7)(mu-S(2)) with [CpNi(CO)](2) and sulfur. Compound 4 was converted back to 1 by sulfur abstraction using PPh(3). The reaction of Mn(2)(CO)(10) with [CpNi(CO)](2) in the presence of thiirane yielded the ethanedithiolato compound CpNiMn(CO)(3)(mu-SCH(2)CH(2)S) (5), which was also obtained from the reaction of Mn(4)(CO)(15)(mu(3)-S(2))(mu(4)-S(2)) with [CpNi(CO)](2) in the presence of thiirane. Compound 5 reacted with additional quantities of thiirane to yield the new compound CpNiMn(CO)(3)[mu-S(CH(2)CH(2)S)(2)], 6, which contains a 3-thiapentanedithiolato ligand that bridges the two metal atoms. Compound 6 was also obtained from the reaction of Mn(2)(CO)(10) with [CpNi(CO)](2) and thiirane. The molecular structures of the new compounds 1-6 were established by single-crystal X-ray diffraction analyses.     

Syntheses and structures of copper(I) complexes based on Cu(n)X(n) (X = Br and I; n = 1, 2 and 4) units and bis(pyridyl) ligands with longer flexible spacer

Self-assembly of four bis(pyridyl) ligands with longer flexible spacer: 1,4-bis(3-pyridylaminomethyl)benzene (L1), 1,4-bis(2-pyridylaminomethyl)benzene (L2), 1,3-bis(3-pyridylaminomethyl)benzene (L3) and 1,3-bis(2-pyridylaminomethyl)benzene (L4), and CuX (X = Br and I) leads to the formation of eight [Cu(n)X(n)]-based (X = Br and I; n = 1, 2, and 4) complexes, [Cu(2)I(2)L1(PPh(3))(4)] (1), [Cu(4)Cl(2)Br(2)(L4)(2)(PPh(3))(6)]·(CH(3)CN)(2) (2), [Cu(2)I(2)(L3)(2)] (3), {[Cu(2)Br(2)L2(PPh(3))(2)]·(CH(2)Cl(2))(2)}(n) (4), [CuIL1](n)·nCH(2)Cl(2) (5), [CuIL1](n) (6), [CuIL4](n) (7) and [Cu(2)I(2)L4](n) (8), which have been synthesized and characterized by elemental analysis, IR, TG, powder and single-crystal X-ray diffraction. Structural analyses show that the eight complexes possess an increasing dimensionality from 0D (1-3) to 1D (4) to 2D (5-8), in which 1 and 2 contain a CuX unit, 2-7 contain a Cu(2)X(2) unit and 8 contains a Cu(4)X(4) unit. Such evolvement indicates that the conformation of flexible bis(pyridyl) ligands and the participation of triphenylphosphine (PPh(3)) as a second ligand take an essential role in the framework formation of the Cu(i) complexes. Moreover, a pair of symmetry-related L3 ligands in complex 3 coordinate to the rhomboid Cu(2)I(2) dimer to form "handcuff-shaped" dinuclear structures, which are further joined together through intermolecular N-HI hydrogen bonds to furnish a 2D (4,4) layer. Although complexes 5 and 6 exhibit a similar 2D (4,4) layer constructed from L1 ligand bridging [Cu(2)I(2)](n) units, the different packing fashion of the layers leads to the formation of 3D porous frameworks of 5 and dense 3D frameworks of 6. The "twisted-boat" conformation of the Cu(4)I(4) tetramer unit in complex 8 has not been reported so far.     

Reactions of thioethers with Mn(2)(CO)(7)(mu-S(2)) proceed with CO displacement and insertion of the sulfur atom into the Mn-Mn bond

The reaction of Mn(2)(CO)(7)(mu-S(2)) (2) with SMe(2) yielded the new complexes Mn(2)(CO)(6)(mu-S(2))(mu-SMe(2)) (3) and Mn(4)(CO)(14)(SMe(2))(mu(3)-S(2))(mu(4)-S(2)) (4) in 18 and 41% yields, respectively. The reaction of 2 with the cyclic thioether thietane SCH(2)CH(2)CH(2) yielded the new complexes Mn(2)(CO)(6)(mu-S(2))(mu-SCH(2)CH(2)CH(2)) (5) and Mn(4)(CO)(14)(SCH(2)CH(2)CH(2))(mu(3)-S(2))(mu(4)-S(2)) (6) in 12 and 52% yields, respectively, and the reaction of 2 with 1,4,9-trithiacyclododecane (12S3) yielded Mn(2)(CO)(6)(mu-12S3)(mu-S(2)) (7) and Mn(4)(CO)(14)(12S3)(mu(3)-S(2))(mu(4)-S(2)) (8) in 8 and 24% yields, respectively. Compounds 3 and 5-7 were characterized crystallographically. Compounds 3, 5, and 7 have similar structures in which the thioether ligand has replaced the bridging carbonyl ligand of 2 and its sulfur atom has been inserted into the manganese-manganese bond. The two manganese atoms are not mutually bonded, and two Mn(CO)(3) groups are held together through the bridging disulfido ligand and the bridging sulfur atom of the thioether ligand. Compound 6 contains a Mn(4)(mu(3)-S(2))(mu(4)-S(2)) moiety without metal-metal bonds. On the basis of spectroscopic data, compounds 4 and 8 are believed to have similar structures.     

A family of manganese rods: syntheses, structures, and magnetic properties

The reaction of the mixed-valent metal triangles [Mn(3)O(O(2)CR)(6)(py)(3)] (R = CH(3), Ph, C(CH(3))(3)) with the tripodal ligands H(3)thme (1,1,1-tris(hydroxymethyl)ethane) and H(3)tmp (1,1,1-tris(hydroxymethyl)propane) in MeCN, produces a family of manganese rodlike complexes whose structures are all derived from a series of edge-sharing triangles. Variable temperature direct current (dc) magnetic susceptibility data were collected for all complexes in the 1.8-300 K temperature range in fields up to 7.0 T. Complex 1, [Mn(12)O(4)(OH)(2)(PhCOO)(12)(thme)(4)(py)(2)], has an S = 7 ground state with the parameters g = 1.98 and D = -0.13 K. Complex 2, [Mn(8)O(4)((CH(3))(3)CCO(2))(10)(thme)(2)(py)(2)] has a ground state of S = 6, with g = 1.81 and D = -0.36 K. Complex 3, [Mn(7)O(2)(PhCO(2))(9)(thme)(2)(py)(3)], has a spin ground states of S = 7 with the parameters g = 1.78 and D = -0.20 K. The best fit for complex 4, [Mn(6)((CH(3))(3)CCO(2))(8)(tmp)(2)(py)(2)], gave a spin ground state of S = 3 with the parameters g = 1.73 and D = -0.75 K, but was of poorer quality than that normally obtained. The presence of multiple Mn(2+) ions in the structure of 4 leads to the presence of low-lying excited states with energy levels very close to the ground state, and in the case of complex 5, [Mn(6)(CH(3)CO(2))(6)(thme)(2)(H(2)tea)(2)], no satisfactory fit of the data was obtained. DFT calculations on 4 and 5 indicate complexes with spin ground states of S = 4 and S = 0 respectively, despite their topological similarities. Single-crystal hysteresis loop and relaxation measurements show complex 1 to be a SMM.     

Scope and limitation of organocuprates, and copper or nickel catalyst-modified Grignard reagents for installation of an alkyl group onto cis-4-cyclopentene-1,3-diol monoacetate

Alkylation of the title compound 1 was investigated with two types of reagents. One is a copper reagent derived from R(T)MgX (X = Cl, Br) and CuX (X = CN, I) and the other is R(T)MgX in the presence of a copper or a nickel catalyst. First, butylation was studied with BuCu(CN)(MgX), Bu(2)Cu(CN)(MgX)(2), BuMgX/CuCN (10 mol %), BuCu (derived from BuMgCl and CuI), and BuMgCl/CuI (10 mol %) in THF or Et(2)O. We found that trans 1,4-isomer 2a and/or trans 1,2-isomer 3a were produced exclusively with these reagents and that the stoichiometry of BuMgX/CuX and the choice of solvent were critical to attain high regioselectivity and efficient yield. Reaction with Bu(2)Cu(CN)(MgCl)(2) and BuMgCl/CuX (X = CN, I; 10 mol %) both in THF produced 2a with 93-94% regioselectivity in 87-92% yields. On the other hand, BuCu(CN)(MgX) in THF, Bu(2)Cu(CN)(MgX)(2) in Et(2)O, and BuMgX/CuCN (10 mol %) in Et(2)O furnished 3a in good yields with >90% selectively, irrespective of X of BuMgX. In the nickel-catalyzed butylation of 1 with BuMgCl, NiCl(2)(dppp) among NiCl(2)(tpp)(2), NiCl(2)(dppf), and NiCl(2)(dppp) furnished the best result to produce 2a. The CuCN-based protocol was then applied to other alkyl Grignard reagents, which include Me, Et, (CH(2))(3)Ph, c-C(6)H(11), (CH(2))(6)OMOM, (CH(2))(9)CH=CH(2), and CH(2)Ph as the alkyl group (R(T)). In addition, the Mitsunobu inversion of 2a and 3a afforded the corresponding cis isomers stereoselectively with AcOH as an acid at -78 degrees C in toluene for 2a and with 4-(NO(2))C(6)H(4)COOH in THF at r.t. for 3a. No racemization during the alkylation was confirmed by the reaction using (1R,3S)-1 (>99% ee) to produce (1S,4S)-2a and (1S,2S)-3a, respectively.     

(Eta-C5H4R)Fe(CO)2X], X = Cl, Br, I, NO3, CO2Me and [(eta-C5H4R)Fe(CO)3]+, R = (CH2)nCO2Me (n = 0-2), and CO2CH2CH2OH: a new group of CO-releasing molecules

A new group of CO-releasing molecules, CO-RMs, based on cyclopentadienyl iron carbonyls have been identified. X-Ray structures have been determined for [(eta-C(5)H(4)CO(2)Me)Fe(CO)(2)X], X = Cl, Br, I, NO(3), CO(2)Me, [(eta-C(5)H(4)CO(2)Me)Fe(CO)(2)](2), [(eta-C(5)H(4)CO(2)CH(2)CH(2)OH)Fe(CO)(2)](2) and [(eta-C(5)H(4)CO(2)Me)Fe(CO)(3)][FeCl(4)]. Half-lives for CO release, (1)H, (13)C, and (17)OC NMR and IR spectra have been determined along with some biological data for these compounds, [(eta-C(5)H(4)CO(2)CH(2)CH(2)OH)Fe(CO)(3)](+) and [[eta-C(5)H(4)(CH(2))(n)CO(2)Me]Fe(CO)(3)](+), n = 1, 2. More specifically, cytotoxicity assays and inhibition of nitrite formation in stimulated RAW264.7 macrophages are reported for most of the compounds analyzed. [(eta-C(5)H(5))Fe(CO)(2)X], X = Cl, Br, I, were also examined for comparison. Correlations between the half-lives for CO release and spectroscopic parameters are found within each group of compounds, but not between the groups.     

Copper halide-bridged ruthenium telluride carbonyl complexes: discovery of the semiconducting cluster chain polymer {[PPh4]2[Te2Ru4(CO)10Cu4Br2Cl2].THF}infinity

A new series of Te-Ru-Cu carbonyl complexes was prepared by the reaction of K(2)TeO(3) with [Ru(3)(CO)(12)] in MeOH followed by treatment with PPh(4)X (X=Br, Cl) and [Cu(MeCN)(4)]BF(4) or CuX (X=Br, Cl) in MeCN. When the reaction mixture of K(2)TeO(3) and [Ru(3)(CO)(12)] was first treated with PPh(4)X followed by the addition of [Cu(MeCN)(4)]BF(4), doubly CuX-bridged Te(2)Ru(4)-based octahedral clusters [PPh(4)](2)[Te(2)Ru(4)(CO)(10)Cu(2)X(2)] (X=Br, [PPh(4)](2)[1]; X=Cl, [PPh(4)](2)[2]) were obtained. When the reaction mixture of K(2)TeO(3) and [Ru(3)(CO)(12)] was treated with PPh(4)X (X=Br, Cl) followed by the addition of CuX (X=Br, Cl), three different types of CuX-bridged Te-Ru carbonyl clusters were obtained. While the addition of PPh(4)Br or PPh(4)Cl followed by CuBr produced the doubly CuBr-bridged cluster 1, the addition of PPh(4)Cl followed by CuCl led to the formation of the Cu(4)Cl(2)-bridged bis-TeRu(5)-based octahedral cluster compound [PPh(4)](2)[{TeRu(5)(CO)(14)}(2)Cu(4)Cl(2)] ([PPh(4)](2)[3]). On the other hand, when the reaction mixture of K(2)TeO(3) and [Ru(3)(CO)(12)] was treated with PPh(4)Br followed by the addition of CuCl, the Cu(Br)CuCl-bridged Te(2)Ru(4)-based octahedral cluster chain polymer {[PPh(4)](2)(Te(2)Ru(4)(CO)(10)Cu(4)Br(2)Cl(2)).THF}(infinity) ({[PPh(4)](2)[4].THF}(infinity)) was produced. The chain polymer {[PPh(4)](2)[4].THF}(infinity) is the first ternary Te-Ru-Cu cluster and shows semiconducting behavior with a small energy gap of about 0.37 eV. It can be rationalized as resulting from aggregation of doubly CuX-bridged clusters 1 and 2 with two equivalents of CuCl or CuBr, respectively. The nature of clusters 1-4 and the formation and semiconducting properties of the polymer of 4 were further examined by molecular orbital calculations at the B3LYP level of density functional theory.     

Proton transfer to nickel-thiolate complexes. 2. Rate-limiting intramolecular proton transfer in the reactions of [Ni(SC(6)H(4)R-4)(PhP[CH(2)CH(2)PPh(2)](2))](+) (R = NO(2), Cl, H, Me, or MeO)

The protonation of [Ni(SC(6)H(4)R-4)(triphos)](+) (triphos = PhP[CH(2)CH(2)PPh(2)](2); R = NO(2), Cl, H, Me, or MeO) by [lutH](+) (lut = 2,6-dimethylpyridine) to form [Ni(S(H)C(6)H(4)R-4)(triphos)](2+) is an equilibrium reaction in MeCN. Kinetic studies, using stopped-flow spectrophotometry, reveal that the reactions occur by a two-step mechanism. Initially, [lutH](+) rapidly binds to the complex (K(2)(R)) in an interaction which probably involves hydrogen-bonding of the acid to the sulfur. Subsequent intramolecular proton transfer from [lutH](+) to sulfur (k(3)(R)) is slow because of both electronic and steric factors. The X-ray crystal structures of [Ni(SC(6)H(4)R-4)(triphos)](+) (R = NO(2), H, Me, or MeO) show that all are best described as square-planar complexes, with the phenyl substituents of the triphos ligand presenting an appreciable barrier to the approach of the sterically demanding [lutH](+) to the sulfur. The kinetic characteristics of the intramolecular proton transfer from [lutH](+) to sulfur have been investigated. The rate of intramolecular proton transfer exhibits a nonlinear dependence on Hammett sigma(+), with both electron-releasing and electron-withdrawing 4-R-substituents on the coordinated thiolate facilitating the rate of proton transfer (NO(2) > Cl > H > Me < MeO). The rate constants for intramolecular proton transfer correlate well with the calculated electron density of the sulfur. The temperature dependence of the rate of the intramolecular proton transfer reactions shows that deltaH() is small but increases as the 4-R-substituent becomes more electron-withdrawing [deltaH = 4.1 (MeO), 6.9 (Me), 11.4 kcal mol(-)(1) (NO(2))], while DeltaS() becomes progressively less negative [deltaS = -50.1 (MeO), -41.2 (Me), -16.4 (NO(2)) cal K(-)(1) mol(-)(1)]. Studies with [lutD](+) show that the rate of intramolecular proton transfer varies with the 4-R-substituent [(k(3)(NO)2)(H)/(k(3)(NO)2)(D) = 0.39; (k(3)(Cl))(H)/(k(3)(Cl))(D) = 0.88; (k(3)(Me))(H)/(k(3)(Me))(D) = 1.3; (k(3)(MeO))(H)/(k(3)(MeO))(D) = 1.2].     

Chemistry of mangana- and rhenatricarbadecaboranyl tricarbonyl complexes: evidence for an associative mechanism of ligand substitution involving an eta6-eta4 cage-slippage process analagous to eta5-eta3-cyclopentadienyl ring-slippage

The reaction of the tricarbadecaboranyl anion, 6-Ph-nido-5,6,9-C(3)B(7)H(9)(-), with M(CO)(5)Br [M = Mn, Re] or [(eta(6)-C(10)H(8))Mn(CO)(3)(+)]BF(4)(-) yielded the half-sandwich metallatricarbadecaboranyl analogues of (eta(5)-C(5)H(5))M(CO)(3) [M = Mn, Re]. For both 1,1,1-(CO)(3)-2-Ph-closo-1,2,3,4-MC(3)B(7)H(9) [M = Mn (2) and Re (3)], the metal is eta(6)-coordinated to the puckered six-membered open face of the tricarbadecaboranyl cage. Reactions of 2 and 3 with isocyanide at room temperature produced complexes 8-(CNBu(t))-8,8,8-(CO)(3)-9-Ph-nido-8,7,9,10-MC(3)B(7)H(9) [M = Mn (4), Re (5)], having the cage eta(4)-coordinated to the metal. Photolysis of 4 and 5 then resulted in the loss of CO and the formation of 1-(CNBu(t))-1,1-(CO)(2)-2-Ph-closo-1,2,3,4-MC(3)B(7)H(9) [M = Mn, Re (6)], where the cage is again eta(6)-coordinated to the metal. Reaction of 2 and 3 with 1 equiv of phosphine at room temperature produced the eta(6)-coordinated monosubstituted complexes 1,1-(CO)(2)-1-P(CH(3))(3)-2-Ph-closo-1,2,3,4-MC(3)B(7)H(9) [M = Mn (7), Re (9)] and 1,1-(CO)(2)-1-P(C(6)H(5))(3)-2-Ph-closo-1,2,3,4-MC(3)B(7)H(9) [M = Mn (8), Re (10)]. NMR studies of these reactions at -40 degrees C showed that substitution occurs by an associative mechanism involving the initial formation of intermediates having structures similar to those of the eta(4)-complexes 4 and 5. The observed eta(6)-eta(4) cage-slippage is analogous to the eta(5)-eta(3) ring-slippage that has been proposed to take place in related substitution reactions of cyclopentadienyl-metal complexes. Reaction of 9 with an additional equivalent of P(CH(3))(3) gave 8,8-(CO)(2)-8,8-(P(CH(3))(3))(2)-9-Ph-nido-8,7,9,10-ReC(3)B(7)H(9) (11), where the cage is eta(4)-coordinated to the metal. Photolysis of 11 resulted in the loss of CO and the formation of the disubstituted eta(6)-complex 1-CO-1,1-(P(CH(3))(3))(2)-2-Ph-closo-1,2,3,4-ReC(3)B(7)H(9) (12).     

Reactions of [Et(4)N](3)[Sb{Fe(CO)(4)}(4)] with Alkyl Halides and Dihalides: Formation of the Alkyl- and the Dialkylantimony-Iron Carbonyl Complexes

The reactions of [Et(4)N](3)[Sb{Fe(CO)(4)}(4)] (1) with RX (R = Me, Et, n-Pr; X = I) in MeCN form the monoalkylated antimony complexes [Et(4)N](2)[RSb{Fe(CO)(4)}(3)] (R = Me, 2; R = Et, 4; R = n-Pr, 6) and the dialkylated antimony clusters [Et(4)N][R(2)Sb{Fe(CO)(4)}(2)] (R = Me, 3; R = Et, 5; R = n-Pr, 7), respectively. When [Et(4)N](3)[Sb{Fe(CO)(4)}(4)] reacts with i-PrI, only the monoalkylated antimony complex [Et(4)N](2)[i-PrSb{Fe(CO)(4)}(3)] (8) is obtained. The mixed dialkylantimony complex [Et(4)N][MeEtSb{Fe(CO)(4)}(2)] (9) also can be synthesized from the reaction of 2 with EtI. While the reaction with Br(CH(2))(2)Br produces [Et(4)N](2)[BrSb{Fe(CO)(4)}(3)] (10), treatment with Cl(CH(2))(3)Br forms the monoalkylated product [Et(4)N](2)[Cl(CH(2))(3)Sb{Fe(CO)(4)}(3)] (11) and a dialkylated novel antimony-iron complex [Et(4)N][{&mgr;-(CH(2))(3)}Sb{Fe(CO)(4)}(3)] (12). On the other hand, the reaction with Br(CH(2))(4)Br forms the monoalkylated antimony product and the dialkylated antimony complex [Et(4)N][{&mgr;-(CH(2))(4)}Sb{Fe(CO)(4)}(2)] (13). Complexes 2-13 are characterized by spectroscopic methods or/and X-ray analyses. On the basis of these analyses, the core of the monoalkyl clusters consists of a central antimony atom tetrahedrally bonded to one alkyl group and three Fe(CO)(4) fragments and the dialkyl products are structurally similar to the monoalkyl clusters, with the central antimony bonded to two alkyl groups and two Fe(CO)(4) moieties in each case. The dialkyl complex 3 crystallizes in the monoclinic space group P2(1)/c with a = 13.014(8) ?, b = 11.527(8) ?, c = 17.085(5) ?, beta = 105.04(3) degrees, V = 2475(2) ?(3), and Z = 4. Crystals of 12 are orthorhombic, of space group Pbca, with a = 14.791(4) ?, b = 15.555(4) ?, c = 27.118(8) ?, V = 6239(3) ?(3), and Z = 8. The anion of cluster 12 exhibits a central antimony atom bonded to three Fe(CO)(4) fragments with a -(CH(2))(3)- group bridging between the Sb atom and one Fe(CO)(4) fragment. This paper discusses the details of the reactions of [Et(4)N](3)[Sb{Fe(CO)(4)}(4)] with a series of alkyl halides and dihalides. These reactions basically proceed via a novel double-alkylation pathway, and this facile methodology can as well provide a convenient route to a series of alkylated antimony-iron carbonyl clusters.     

Formation and chemical reactivities of a new type of double-butterfly [[Fe2(mu-CO)(CO)6]2(mu-SZS-mu)]2-: synthetic and structural studies on novel linear and macrocyclic butterfly Fe/E (E=S,Se) cluster complexes

A new type of double-butterfly [[Fe(2)(mu-CO)(CO)(6)](2)(mu-SZS-mu)](2-) (3), a dianion that has two mu-CO ligands, has been synthesized from dithiol HSZSH (Z=(CH(2))(4), CH(2)(CH(2)OCH(2))(1-3)CH(2)), [Fe(3)(CO)(12)], and Et(3)N in a molar ratio of 1:2:2 at room temperature. Interestingly, the in situ reactions of dianions 3 with various electrophiles affords a series of novel linear and macrocyclic butterfly Fe/E (E=S, Se) cluster complexes. For instance, while reactions of 3 with PhC(O)Cl and Ph(2)PCl give linear clusters [[Fe(2)(mu-PhCO)(CO)(6)](2)(mu-SZS-mu)] (4 a,b: Z=CH(2)(CH(2)OCH(2))(2,3)CH(2)) and [[Fe(2)(mu-Ph(2)P)(CO)(6)](2)(mu-SZS-mu)] (5 a,b: Z=CH(2)(CH(2)OCH(2))(2,3)CH(2)), reactions with CS(2) followed by treatment with monohalides RX or dihalides X-Y-X give both linear clusters [[Fe(2)(mu-RCS(2))(CO)(6)](2)(mu-SZS-mu)] (6 a-e: Z=CH(2)(CH(2)OCH(2))(1,2)CH(2); R=Me, PhCH(2), FeCp(CO)(2)) and macrocyclic clusters [[Fe(2)(CO)(6)](2)(mu-SZS-mu)(mu-CS(2)YCS(2)-mu)] (7 a-e: Z=(CH(2))(4), CH(2)(CH(2)OCH(2))(1-3)CH(2); Y=(CH(2))(2-4), 1,3,5-Me(CH(2))(2)C(6)H(3), 1,4-(CH(2))(2)C(6)H(4)). In addition, reactions of dianions 3 with [Fe(2)(mu-S(2))(CO)(6)] followed by treatment with RX or X-Y-X give linear clusters [[[Fe(2)(CO)(6)](2)(mu-RS)(mu(4)-S)](2)(mu-SZS-mu)] (8 a-c: Z=CH(2)(CH(2)OCH(2))(1,2)CH(2); R=Me, PhCH(2)) and macrocyclic clusters [[[Fe(2)(CO)(6)](2)(mu(4)-S)](2)(mu-SYS-mu)(mu-SZS-mu)] (9 a,b: Z=CH(2)(CH(2)OCH(2))(2,3)CH(2); Y=(CH(2))(4)), and reactions with SeCl(2) afford macrocycles [[Fe(2)(CO)(6)](2)(mu(4)-Se)(mu-SZS-mu)] (10 d: Z=CH(2)(CH(2)OCH(2))(3)CH(2)) and [[[Fe(2)(CO)(6)](2)(mu(4)-Se)](2)(mu-SZS-mu)(2)] (11 a-d: Z=(CH(2))(4), CH(2)(CH(2)OCH(2))(1-3)CH(2)). Production pathways have been suggested; these involve initial nucleophilic attacks by the Fe-centered dianions 3 at the corresponding electrophiles. All the products are new and have been characterized by combustion analysis and spectroscopy, and by X-ray diffraction techniques for 6 c, 7 d, 9 b, 10 d, and 11 c in particular. X-ray diffraction analyses revealed that the double-butterfly cluster core Fe(4)S(2)Se in 10 d is severely distorted in comparison to that in 11 c. In view of the Z chains in 10 a-c being shorter than the chain in 10 d, the double cluster core Fe(4)S(2)Se in 10 a-c would be expected to be even more severely distorted, a possible reason for why 10 a-c could not be formed.     

A series of 3d-4f heterometallic frameworks comprising 2D lanthanide-organic layers and diverse Cu-complex pillars

Six novel 3D layer-pillared lanthanide-transition metal coordination polymers,LnCuX(IN)2(Ac)(H2O)(Ln = Tb,X = Br(1);Ln = Er,X = Cl(2)),[LnCuCl(IN)2(Ac)].H2O(Ln = Gd(3);Ln = Eu(4)),and [LnCu2Br2(IN)2(Ac)(H2O)].nH2O(Ln = Dy,n =0(5);Ln = Gd,n = 0.5(6))(IN = isonicotinate,Ac = acetate),have been obtained by linking Ln-organic layers and diverse Cu-complex pillars under hydrothermal conditions.1 and 2 are isostructural and formed by 2D Ln-IN-Ac layers and CuX(IN)2 pillars(X = Br(1),X= Cl(2));3 and 4 are isomorph...     

Osmium-mediated C--H and C--C bond cleavage of a phenolic substrate: p-quinone methide and methylene arenium pincer complexes

The diphosphine 2,4,6-(CH(3))(3)-3,5-(iPr(2)PCH(2))(2)C(6)OH (1) reacts with [OsCl(2)(PPh(3))(3)] in presence of an excess of triethylamine to yield the isomeric para-quinone methide derivatives [Os{4-(CH(2))-1-(O)-2,6-(CH(3))(2)-3,5-(iPr(2)PCH(2))(2)C(6)}(Cl)(H)(PPh(3))] (2 and 3), which differ in the positions of the mutually trans hydride and chloride ligands. Complex 2 reacts with CO to afford the dicarbonyl species [Os{1-(O)-2,4,6-(CH(3))(3)-3,5-(iPr(2)PCH(2))(2)C(6)}(Cl)(CO)(2)] (4), which results from hydride insertion into the quinonic double bond. Protonation of 2 and 3 leads to the formation of the methylene arenium derivative [Os{4-(CH(2))-1-(OH)-2,6-(CH(3))(2)-3,5-(iPr(2)PCH(2))(2)C(6)}(Cl)(H)(PPh(3))][OSO(2)CF(3)] (5 a). The diphosphine 1 reacts with [OsCl(2)(PPh(3))(3)] at 100 degrees C under H(2) to afford [Os{1-(OH)-2,6-(CH(3))(2)-3,5-(iPr(2)PCH(2))(2)C(6)}(Cl)(H(2))(PPh(3))] (6), a PCP pincer complex resulting formally from C(sp(2))--C(sp(3)) cleavage of the C--CH(3) group in 1. C--C hydrogenolysis resulting in the same complex is achieved by heating 2 under H(2) pressure. Reaction of the diphosphine substrate with [OsCl(2)(PPh(3))(3)] under H(2) at lower temperature allows the observation of a methylene arenium derivative resulting from C--H activation, [Os{4-(CH(2))-1-(OH)-2,6-(CH(3))(2)-3,5-(iPr(2)PCH(2))(2)C(6)}(Cl)(2)(H)] (7). This compound reacts with PPh(3) in toluene to afford the ionic derivative [Os{4-(CH(2))-1-(OH)-2,6-(CH(3))(2)-3,5-(iPr(2)PCH(2))(2)C(6)}(Cl)(H)(PPh(3))]Cl (5 b). X-ray diffraction studies have been carried out on compounds 2, 3, 4, 5 b, 6, and 7, which allows the study of the structural variations when going from methylene arenium to quinone methide derivatives.