Hybridization of commercial polymeric microparticles and magnetic nanoparticles for the dispersive micro-solid phase extraction of nitroaromatic hydrocarbons from water

In this article, the combination of commercial polymeric microparticles (OASIS MCX) and cobalt ferrite nanoparticles is evaluated in dispersive micro-solid phase extraction (D-μSPE) for the determination of six nitroaromatic hydrocarbons in water. The high affinity of the polymeric material toward the target analytes as well as the magnetic behavior of cobalt ferrite nanoparticles are combined in a synergic way to developed an efficient and simple D-μSPE approach. The sorptive performance of the hybrid material is compared with that most usual sorbents and the effect of its synthesis steps on the extraction capability is also evaluated in depth. After the optimization of selected variables, D-μSPE method was assessed in terms of linearity, sensitivity, precision and accuracy. The new extraction method allows the determination of the target compounds with limits of detection in the range from 0.12 to 1.26 μg/L and relative standard deviations lower than 9.6%. The recovery study was performed in two different water samples obtaining percentages from 71 to 103%, which demonstrated the applicability of the hybrid sorbent for the selected analytical problem.     

Preparation of magnetic molecularly imprinted polymer based on multiwalled carbon nanotubes for selective dispersive micro-solid phase extraction of fenitrothion followed by ion mobility spectrometry analysis

A novel molecularly imprinted polymer based on magnetic multiwalled carbon nanotubes was fabricated and applied for selective dispersive micro-solid phase extraction of fenitrothion prior its determination by ion mobility spectrometry. The composite was synthesized using magnetic multiwalled carbon nanotubes as the support. Methacrylic acid was used as the functional monomer, fenitrothion as the template, ethylene glycol dimethacrylate as the cross-linker, and 2,2-azoisobutyronitrile as the initiator. The resultant polymer was characterized by FTIR spectroscopy, X-ray diffraction, field emission scanning electron microscopy, Brunauer–Emmet–Teller analysis, thermogravimetric analysis, and vibrating sample magnetometer techniques. Experimental factors affecting the extraction efficiency such as pH and amount of sorbent were evaluated. Under optimum experimental conditions, the developed method displayed the linear range of 5–220 μg/L with a detection limit of 1.3 μg/L. The intra- and interday relative standard deviations for determination of fenitrothion were 3.6 and 4.7% (n = 6), respectively. Ultimately, the proposed method was used to monitor trace amounts of fenitrothion in fruits, vegetables, and water samples.     

Effervescence‐assisted dispersive solid‐phase extraction using ionic‐liquid‐modified magnetic β‐cyclodextrin/attapulgite coupled with high‐performance liquid chromatography for fungicide detection in honey and juice

In this study, a simple effervescence‐assisted dispersive solid‐phase extraction method was developed to detect fungicides in honey and juice. Most significantly, an innovative ionic‐liquid‐modified magnetic β‐cyclodextrin/attapulgite sorbent was used because its large specific surface area enhanced the extraction capacity and also led to facile separation. A one‐factor‐at‐a‐time approach and orthogonal design were employed to optimize the experimental parameters. Under the optimized conditions, the entire extraction procedure was completed within 3 min. In addition, the calibration curves exhibited good linearity, and high enrichment factors were achieved for pure water and honey samples. For the honey samples, the extraction efficiencies for the target fungicides ranged from 77.0 to 94.3% with relative standard deviations of 2.3–5.44%. The detection and quantitation limits were in the ranges of 0.07–0.38 and 0.23–1.27 μg/L, respectively. Finally, the developed technique was successfully applied to real samples, and satisfactory results were achieved. This analytical technique is cost‐effective, environmentally friendly, and time‐saving.     

分散固相萃取-液相色谱-串联质谱法测定农产品中吡氟甲禾灵

应用液相色谱-串联质谱联用技术,建立了农产品中吡氟甲禾灵的分析方法.样品经乙腈提取,无水Mg2SO4和NaCl混合盐盐析,N-丙基乙二胺、C18填料分散固相萃取净化;采用乙腈和5 mmol/L甲酸铵水溶液为流动性,二元梯度洗脱,C18(2.1×150 mm,3.5 μm)色谱柱分离;电喷雾正离子模式采集,多反应监测模式...     

Multiresidue pesticides analysis in soils using modified QuEChERS with disposable pipette extraction and dispersive solid‐phase extraction

QuEChERS original method was modified into a new version for pesticides determination in soils. The QuEChERS method is based on liquid–liquid portioning with ACN and was followed by cleanup step using dispersive SPE and disposable pipette tips. Gas chromatographic separation with MS detection was carried out for pesticides quantification. The method was validated using recovery experiments for 36 multiclass pesticides. Mean reco‐veries of pesticides at each of the four spiking levels between 10–300 μg/kg of soil ranged from 70–120% for 26 pesticides with RSD values less than 15%. The method achieved low limit of detection less than 7.6 μg/kg. Matrix effects were observed for 13 pesticides. Matrix effects were compensated by using matrix‐matched calibration. The method was applied successfully using d‐SPE or DPX in the analysis of the pesticides in soils from organic farming and integrated pest management.     

Speciation analysis of mercury by dispersive solid‐phase extraction coupled with capillary electrophoresis

A pretreatment method of dispersive solid‐phase extraction (DSPE) along with back‐extraction followed by CE‐UV detector was developed for the determination of mercury species in water samples. Sulfhydryl‐functionalized SiO₂ microspheres (SiO₂−SH) were synthesized and used as DSPE adsorbents for selective extraction and enrichment of three organic mercury species namely ethylmercury (EtHg), methylmercury (MeHg), and phenylmercury (PhHg), along with L‐cysteine (L‐cys) containing hydrochloric acid as back‐extraction solvent. Several main extraction parameters were systematically investigated including sample pH, amount of adsorbent, extraction and back‐extraction time, volume of eluent, and concentration of hydrochloric acid. Under optimal conditions, good linearity was achieved with correlation coefficients over 0.9990, in the range of 4−200 μg/L for EtHg, and 2−200 μg/L for MeHg and PhHg. The LODs were obtained of 1.07, 0.34, and 0.24 μg/L for EtHg, MeHg, and PhHg, respectively, as well as the LOQs were 3.57, 1.13, and 0.79 μg/L, respectively, with enrichment factors ranging from 109 to 184. Recoveries were attained with tap and lake water samples in a range of 62.3−107.2%, with relative standard deviations of 3.5–10.1%. The results proved that the method of SiO₂−SH based DSPE coupled with CE‐UV was a simple, rapid, cost‐effective, and eco‐friendly alternative for the determination of mercury species in water samples.     

Optimization of dispersive liquid-liquid microextraction combined with gas chromatography for the analysis of nitroaromatic compounds in water

Dispersive liquid-liquid microextraction (DLLME) coupled with gas chromatography-flame ionization detector (GC-FID) was developed for preconcentration and determination of some nitroaromatic compounds in wastewater samples. The effects of different variables on the extraction efficiency were studied simultaneously using experimental design. The variables of interest in the DLLME process were extraction and disperser solvent volumes, salt effect, sample volume, extraction temperature and extraction time. A Plackett-Burman design was performed for screening of variables in order to determine the significant variables affecting the extraction efficiency. Then, the significant factors were optimized by using a central composite design (CCD) and the response surface equations were derived. The optimum experimental conditions found from this statistical evaluation included: sample volume, 9 mL; extraction solvent (CCl₄) volume, 20 μL; disperser solvent (methanol) volume, 0.75 mL; sodium chloride concentration, 3% (w/v); extraction temperature, 20 °C and extraction time, 2 min. Under the optimum conditions, the preconcentration factors were between 202 and 314. Limit of detections (LODs) ranged from 0.09 μg L⁻¹ (for 2-nitrotoluene) to 0.5 μg L⁻¹ (for 2,4-dinitrotoluene). Linear dynamic ranges (LDRs) of 0.5-300 and 1-400 μg L⁻¹ were obtained for mononitrotoluenes (MNTs) and dinitrotoluenes (DNTs), respectively. Performance of the present method was evaluated for extraction and determination of nitroaromatic compounds in wastewater samples in the range of microgram per liter and satisfactory results were obtained (RSDs < 10.1%).     

Multiresidue analytical method of pesticides in peanut oil using low-temperature cleanup and dispersive solid phase extraction by GC-MS

A method for the determination of 33 pesticides in peanut oil by GC-MS was described. Two extraction procedures based on (i) low-temperature extraction and (ii) liquid-liquid extraction were tested for the optimization of the method. The mixture of anhydrous MgSO(4) with primary secondary amine (PSA) or with PSA and C(18) was performed as sorbents in dispersive SPE. Low temperature along with PSA and C(18) cleanup gave the best results. Pesticides were identified and quantified by GC-MS in SIM mode. The correlation coefficients, R(2), in the linear range tests were better than 0.990. The average recoveries for most pesticides (spiked at 0.02, 0.05, 0.2, and 1 mg/kg) ranged from 70 to 110%, the RSD was below 20% in most instances, and LODs varied from 0.5 to 8 mug/kg.     

Development of a new analytical method for the determination of red beetroot betalains using dispersive solid‐phase extraction

The objective of this study was to develop a method for the determination of red beetroot betalains based on the dispersive solid‐phase extraction and modified QuEChERS methods followed by micro‐high performance liquid chromatography coupled with a mass spectrometer that was equipped with a quadrupole and time‐of‐flight detector. Currently, new techniques for the extraction of the pigments are necessary and in this study, an extraction of beetroot betalains based on the QuEChERS method was developed for the first time. Twelve variants of the methods with different sorbent combinations were tested. The extraction with 15% methanol and with 0.05% formic acid was performed as a reference method to compare the obtained results. In all of the samples with the addition of sorbents, a lower noise was demonstrated in the obtained results. The betalain concentrations obtained using the tested methods were 0.32–0.54 mg g^?1, while the value of the reference method was 0.44 mg g^?1. The method that used the strong ion exchange sorbent (0.44±0.05 mg g^?1) was the most adequate in terms of analyzed content, related standard deviation value and interference compared to the reference method. It was concluded that the properly modified QuEChERS method can be successfully applied for the determination of red beetroot betalains.     

Rapid determination of 95 pesticides in soybean oil using liquid-liquid extraction followed by centrifugation, freezing and dispersive solid phase extraction as cleanup steps and gas chromatography with mass spectrometric detection

A multi-residue method using liquid-liquid extraction (LLE) followed by centrifugation, freezing and dispersive solid phase extraction (dispersive SPE) as clean up steps and gas chromatography with mass spectrometric detection has been developed for the determination of trace levels of 95 pesticides in soybean oil. LLE has been optimized to extract these pesticide residues from soybean oil by studying the effect of different partitions between (i) acetonitrile (MeCN) saturated with petroleum ether and a soybean oil solution dissolved in petroleum ether saturated with MeCN, (ii) partition between MeCN and a soybean oil solution dissolved in petroleum ether saturated with MeCN, (iii) partition between MeCN and a soybean oil solution dissolved in petroleum ether, (iv) partition between MeCN saturated with n-hexane and a soybean oil solution dissolved in n-hexane saturated with MeCN, (v) partition between MeCN and a soybean oil solution, (vi) partition between MeCN and a soybean oil solution dissolved in n-hexane and (vii) partition between MeCN and a soybean oil solution dissolved in mixture of acetone and n-hexane (3:2) to the highest recovery yield of pesticides and the lowest co-extract fat residue in the final extract. Experiments were carried out in order to study the efficiency of using centrifugation and freezing steps as well as the used of primary secondary amine (PSA), florisil, graphite carbon black (GCB) and C18 for dispersive SPE on clean up stages to minimize the co-extract fat. The recoveries obtained ranged from 80 to 114% and the relative standard deviation (RSDs) from 2 to 14% for spiking levels of 0.040, 0.080 and 0.160 mg kg^− 1. The limits of quantification (LOQs) of almost all compounds were below the maximum residue limits (MRLs) established by the Korean legislations for soybean oil.     

Combination of dispersive solid‐phase extraction and salting‐out homogeneous liquid–liquid extraction for the determination of organophosphorus pesticides in cereal grains

A new analytical method for the determination of organophosphorus pesticides in cereal samples was developed by combining dispersive SPE (d‐SPE) and salting‐out homogeneous liquid–liquid extraction (SHLLE). The pesticides were first extracted from cereal grains with acetonitrile, followed by d‐SPE cleanup. A 2 mL aliquot of the extract was then added to a centrifuge tube containing 9.2 mL water and 3.3 g NaCl for SHLLE. Analysis of the extract was carried out by gas chromatography coupled with flame photometric detection. The d‐SPE procedure effectively provides the necessary cleanup of the extract while SHLLE is used as an efficient concentration technique. Experimental parameters influencing the extraction efficiency including amounts of added water and salt were investigated. Recovery studies were carried out at three fortification levels, yielding recoveries in the range of 57.7–98.1% with the RSD from 3.7 to 10.9%. The reported limits of determination obtained from this study were 1 μg/kg, which is better than the conventional methods. In the analysis of 40 wheat and corn samples taken from Beijing suburbs, only two wheat samples have chlorpyrifos residue over the limits of determination.     

Synthesis of a graphene‐based nanocomposite for the dispersive solid‐phase extraction of vancomycin from biological samples

The approach of this work was to study the capability of graphene‐based materials in the field of biological sample preparation. A polypyrrole/graphene composite was synthesized and characterized. The potential of the nanocomposite was investigated as a sorbent in dispersive solid‐phase extraction followed by high‐performance liquid chromatography with UV detection for vancomycin as a model drug. The effect of different parameters influencing extraction efficiency such as sample pH and sample volume, ionic strength, extraction time, type, and volume of desorption solvent and desorption time were investigated. A comparison study was also conducted between polypyrrole/graphene and some different novel and classic sorbents. Under optimized conditions, the calibration curve for vancomycin showed linearity in the range of 0.05–10 μg/mL. In addition, limits of detection, and quantification were 0.003 and 0.01 μg/mL, respectively. The intraday and interday relative standard deviations at a concentration of 0.05 μg/mL (n = 3) were 1.6 and 2.1%, respectively. Furthermore, the proposed method was successfully applied for the determination of vancomycin in plasma and urine samples. The relative recoveries indicated the feasibility of graphene‐based sorbents in biological sample analysis.     

Multi-walled carbon nanotube-based dispersive solid phase extraction with following back-extraction for HPLC/UV determination of Rosmarinic acid in lemon balm and Rosemary plant samples

In this paper, dispersive solid phase extraction with following back-extraction and HPLC/UV determination of Rosmarinic acid have been investigated. Multi-walled carbon nanotubes were used as sorbent in the suggested method. The effectiveness of some parameters such as extraction time, sorbent dosage, pH and ionic strength of the aqueous solution on Rosmarinic acid adsorption were studied. The extraction time of 5.0 min, adsorbent weight of 5.0 mg, and pH of 2.5 were obtained as the optimum experimental parameters. Adsorption of Rosmarinic acid molecules was almost independent from ionic strength. For back-extraction purpose a basic solution containing methanol was brought into contact with sorbent to desorb Rosmarinic acid molecules from sorbent containing adsorbed Rosmarinic acid molecules. Linear range of HPLC method for Rosmarinic acid quantification was 1.80–21.62 mg/L (R² = 0.998). The relative standard deviation, limit of detection, and limit of quantification for the suggested method were 0.81%, 0.68 mg/L, and 2.86 mg/L, respectively. The proposed method was applied for extraction and HPLC/UV determination of Rosmarinic acid in Lemon balm and Rosemary plant samples. Comparison between obtained chromatograms before adsorption and after desorption processes showed that suggested extraction/back-extraction process has good selectivity and efficiency for separation of Rosmarinic acid molecules from interfering molecules existing in the plant extracts. The proposed method is efficient, low cost, fast, and simple for separation, extraction, and determination of Rosmarinic acid.     

Extraction of phenolic compounds from water samples by dispersive micro‐solid‐phase extraction

In this article, the use of magnetically separable sorbent polyaniline/silica‐coated nickel nanoparticles is evaluated under a dispersive micro‐solid‐phase extraction approach for the extraction of phenolic compounds from water samples. The sorbent was prepared by in situ chemical polymerization of aniline on the surface of silica‐modified nickel nanoparticles and was characterized by Fourier transform infrared spectroscopy, transmission electron microscopy, X‐ray powder diffraction, scanning electron microscopy, energy‐dispersive X‐ray spectrometry, and vibrating sample magnetometry. Effective variables such as amount of sorbent (milligrams), pH and ionic strength of sample solution, volume of eluent solvent (microliters), vortex, and ultrasonic times (minutes) were investigated by fractional factorial design. The significant variables optimized by a Box–Behnken design were combined by a desirability function. Under the optimized conditions, the calibration graphs of analytes were linear in a concentration range of 0.02–100 μg/mL, and with correlation coefficients more than 0.999. The limits of detection and quantification were in the ranges of 10–23 and 33–77 μg/L, respectively. This procedure was successfully employed in the determination of target analytes in spiked water samples; the relative mean recoveries ranged from 96 to 105%.     

Development of a highly sensitive and selective hyphenated technique (molecularly imprinted micro-solid phase extraction fiber-molecularly imprinted polymer fiber sensor) for ultratrace analysis of folic acid

A simple polymerization strategy is reported in this work which allows molecularly imprinted polymeric fiber (monolith) fabrication for direct use in sensing devices. This is advantageous for achieving higher degree of enrichment of target analyte (folic acid) from the complex matrices of real samples, without any surface fouling, cross-reactivity, and non-specific (false-positive) contributions. In order to measure serum folic acid at ultratrace level to detect spina bifida, a neural tube defect in mother, and other acute cases of proteomic diseases, the hyphenation between molecularly imprinted micro-solid phase extraction fiber and a complementary molecularly imprinted polymer-carbon composite fiber sensor has been found quite efficient. The primitive diagnosis of many chronic diseases is feasible by estimating folic acid as biomarker, with the detection limit as low as 0.0036 ng mL⁻¹ (relative standard deviation = 0.13%, signal/noise = 3) in human blood serum.     

Speciation and determination of chromium ions by dispersive micro solid phase extraction using magnetic graphene oxide followed by flame atomic absorption spectrometry

A selective, simple and fast dispersive micro solid phase extraction method using magnetic graphene oxide (GO) as an efficient sorbent has been developed for the extraction, separation and speciation analysis of chromium ions. The method is based on different adsorption behaviour of Cr(VI) and Cr(III) species onto magnetic GO in aqueous solutions which allowed the selective separation and extraction of Cr(VI) in the pH range of 2.0–3.0. The retained Cr(VI) ions by the sorbent were eluted using 0.5 mL of 0.5 mol L^?1 nitric acid solution in methanol and determined by ?ame atomic absorption spectrometry. Total chromium content was determined after the oxidation of Cr(III) to Cr(VI) by potassium permanganate. All effective parameters on the performance of the extraction process were thoroughly investigated and optimised. Under the optimised conditions, the method exhibited a linear dynamic range of 0.5–50.0 µg L^?1 with a detection limit of 0.1 µg L^?1 and pre-concentration factor of 200. The relative standard deviations of 3.8% and 4.6% (n = 8) were obtained at 25.0 µg L^?1 level of Cr(VI) for intra- and inter-day analysis, respectively. The method was successfully applied to the speciation and determination of Cr(VI) and Cr(III) in environmental water samples.     

Enatioselective quantitative separation of d- and l-thyroxine by molecularly imprinted micro-solid phase extraction silver fiber coupled with complementary molecularly imprinted polymer-sensor

Thyroxine is a known disease biomarker which demands a highly sensitive and selective technique to measure ultratrace level with enantiodifferentiation of its optical isomers (d- and l-), in real samples. In this work, an approach of hyphenation between molecularly imprinted micro-solid phase extraction and a complementary molecularly imprinted polymer-sensor was adopted for enantioseparation, preconcentration, and analysis of d- and l-thyroxine. In both techniques, the same imprinted polymer, coated on a vinyl functionalized self-assembled monolayer modified silver wire, was used as the respective extraction fiber as well as sensor material. This combination enabled enhanced preconcentration of test analyte substantially so as to achieve the stringent limit [limit of detection: 0.0084 ng mL⁻¹, RSD = 0.81%, S/N = 3 (d-thyroxine); 0.0087 ng mL⁻¹, RSD = 0.63%, S/N = 3 (l-thyroxine)] of clinical detection of thyroid-related diseases, without any problems of non-specific false-positive contribution and cross-reactivity.     

High-throughput micro-solid phase extraction on 96-well plate using dodecyl methacrylate-ethylen glycol dimethacrylate monolithic copolymer

A novel high-throughput device based on 96-micro-solid phase extraction (96-μ-SPE) system was constructed for multiresidue determination of nine pesticides in aquatic samples. The extraction procedure was performed on a commercially available 96-well plate system. The extraction module consisted of 96 pieces of 1 cm × 3 cm of cylindrically shaped stainless steel meshes. The prepared meshes were fixed in a home-made polytetrafluoroethylene-based constructed ninety-six holes block for possible simultaneous immersion of meshes into the center of individual wells. Dodecyl methacrylate and ethylene glycol dimethacrylate was copolymerized as a monolithic polymer and placed in the cylindrically shaped stainless steel meshes as extracting medium. A volume of 1 mL of the aquatic sample was transferred into the 96-well plate and the 96-μ-SPE device was applied for the extraction of the selected pesticides. Subsequently, the extracted analytes were analyzed by gas chromatography–mass spectrometry. Influential parameters such as polymer synthesis conditions, sorbent-to-sorbent reproducibility, ionic strength and extraction time were optimized. Intra and inter-sorbent reproducibility on 96-μ-SPE device were evaluated and results revealed that extraction yields are rather similar. Limits of detection were below 4 μg L⁻¹ and the coefficient of determination was satisfactory (r² > 0.99) for all the studied analytes. The developed method was successfully applied to the extraction and determination of the selected pesticides in surface water samples.     

Efficient sample preparation method based on solvent‐assisted dispersive solid‐phase extraction for the trace detection of butachlor in urine and waste water samples

In this work, an efficient sample preparation method termed solvent‐assisted dispersive solid‐phase extraction was applied. The used sample preparation method was based on the dispersion of the sorbent (benzophenone) into the aqueous sample to maximize the interaction surface. In this approach, the dispersion of the sorbent at a very low milligram level was achieved by inserting a solution of the sorbent and disperser solvent into the aqueous sample. The cloudy solution created from the dispersion of the sorbent in the bulk aqueous sample. After pre‐concentration of the butachlor, the cloudy solution was centrifuged and butachlor in the sediment phase dissolved in ethanol and determined by gas chromatography with flame ionization detection. Under the optimized conditions (solution pH = 7.0, sorbent: benzophenone, 2%, disperser solvent: ethanol, 500 μL, centrifuged at 4000 rpm for 3 min), the method detection limit for butachlor was 2, 3 and 3 μg/L for distilled water, waste water, and urine sample, respectively. Furthermore, the preconcentration factor was 198.8, 175.0, and 174.2 in distilled water, waste water, and urine sample, respectively. Solvent‐assisted dispersive solid‐phase extraction was successfully used for the trace monitoring of butachlor in urine and waste water samples.