XAFS and LIBD investigation of the formation and structure of colloidal Pu(IV) hydrolysis products

Pu(IV) oxyhydroxide colloid growth is investigated with XAFS and LIBD. From combined results a model of colloid formation is proposed, which leads to a face-centered cubic Pu sublattice having cation defects, as observed with EXAFS, and a linear dependency of log [Pu(IV)] on -log [H+] with slope -2, in accord with LIBD. The solubility for Pu(IV) measured with LIBD is close to the lower limit of the solubility curve from previously reported data.     

Laser-induced breakdown detection combined with asymmetrical flow field-flow fractionation: application to iron oxi/hydroxide colloid characterization

The combination of asymmetrical flow field-flow fractionation (AsFlFFF) with the laser-induced breakdown detection (LIBD) is presented as a powerful tool for the determination of colloid size distribution at trace particle concentrations. Detection limits (D1) of 1, 4, and 20 microg/L have been determined for a mixture of polystyrene reference particles with 20, 50, and 100 nm in size, respectively. This corresponds to injected masses of 1, 4, and 20 pg, which is lower than found in a previous study with the symmetrical FlFFF (SyFlFFF). The improvement is mainly due to the lower colloid background discharged from the AsFlFFF channel. The combined method of AsFlFFF-LIBD is then applied to the analysis of iron oxi/hydroxide colloids being considered as potential carriers for the radionuclide migration from a nuclear waste repository. Our LIBD arrangement is less sensitive for iron colloid detection as compared to reference polystyrene particles which results in a detection limit of approximately 240 microg/L FeOOH for the AsFlFFF-LIBD analysis. This is superior to the detection via UV-Vis absorbance and comparable to ICP-MS detection. Size information (mean size 11-18 nm) for different iron oxi/hydroxide colloids supplied by the present method is comparable to that obtained by sequential ultrafiltration and dynamic light scattering. A combined on-line ICP-MS detection is used to gain insight into the colloid-borne main and trace elements.     

Multivariate calibration of spectra obtained by Laser Induced Breakdown Spectroscopy of plutonium oxide surrogate residues

Laser Induced Breakdown Spectroscopy (LIBS) was used to determine elemental concentration of plutonium oxide surrogate (cerium oxide) residue for monitoring the fabrication of lanthanide borosilicate glass. Quantitative analysis by LIBS is affected by the severe limitation of variation in the induced plasma due to changes in the matrix. Multivariate calibration was applied to LIBS data to predict the concentrations of Ce, Cr, Fe, Mo, and Ni. A total of 18 different samples were prepared to compare calibration from univariate data analysis and from multivariate data analysis. Multivariate calibration was obtained using Principal Component Regression (PCR) and Partial Least Squares (PLS). Univariate calibration was obtained from background-corrected atomic emission lines. Calibration results show improvement in the coefficient of determination from 0.87 to 0.97 for Ce compared to univariate calibration. The root mean square error also reduced from 7.46 to 2.93%. A similar trend was obtained for Cr, Fe, Mo, and Ni also. These results clearly demonstrate the feasibility of using LIBS for online process monitoring in a hazardous waste management environment.     

Probing particle size distributions in natural surface waters from 15 nm to 2 microm by a combination of LIBD and single-particle counting

We present a technique for measuring colloid size distributions between 15 nm and 2 microm at concentrations relevant to natural surface waters. Two particle-measuring methods are combined: laser-induced breakdown detection (LIBD), which allows the quantification of colloid size distributions below 400 nm, and a commercial single-particle counter that extends the accessible size range up to two mum. Centrifugation was used in order to separate micrometer sized particles for the LIBD measurement. The feasibility is demonstrated on water of Lake Brienz (Switzerland) and the River Pfinz (Germany) and the particle size distributions follow Pareto's law even down to 15 nm in both cases.     

Application of laser-induced breakdown spectrometry in urban health

The use of laser-induced breakdown spectrometry (LIBS) for elemental determination and detection in urban health is reviewed. It highlights the unique use of LIBS in fiber-based optics, in process control, and for field instrumentation. Selected applications confirm that LIBS could be the technique of choice for many applications in urban health.     

Optimization of chemical and instrumental parameters in hydride generation laser-induced breakdown spectrometry for the determination of arsenic,antimony, lead and germanium in aqueous samples

A laser induced breakdown spectrometry hyphenated with on-line continuous flow hydride generation sample introduction system, HG-LIBS, has been used for the determination of arsenic, antimony, lead and germanium in aqueous environments. Optimum chemical and instrumental parameters governing chemical hydride generation, laser plasma formation and detection were investigated for each element under argon and nitrogen atmosphere. Arsenic, antimony and germanium have presented strong enhancement in signal strength under argon atmosphere while lead has shown no sensitivity to ambient gas type. Detection limits of 1.1 mg L⁻¹, 1.0 mg L⁻¹, 1.3 mg L⁻¹ and 0.2 mg L⁻¹ were obtained for As, Sb, Pb and Ge, respectively. Up to 77 times enhancement in detection limit of Pb were obtained, compared to the result obtained from the direct analysis of liquids by LIBS. Applicability of the technique to real water samples was tested through spiking experiments and recoveries higher than 80% were obtained. Results demonstrate that, HG-LIBS approach is suitable for quantitative analysis of toxic elements and sufficiently fast for real time continuous monitoring in aqueous environments.     

Analysis of lead and sulfur in environmental samples by double pulse laser induced breakdown spectroscopy

In the present work, a model of double pulse laser-induced breakdown spectroscopy (LIBS) spectrometer has been developed and results from two different applications of double pulse LIBS for solving the problems of environmental interest are presented. In one case, laser induced breakdown spectroscopy has been applied to the determination of heavy and toxic metals (lead) in soil samples. In the second case, laser induced breakdown spectroscopy was used in preliminary experiments for the detection of sulfur content in coal, and on the basis of spectral features, ways to improve the sensitivity of laser induced breakdown spectroscopy detection of sulfur are proposed. The detection limit for lead in soil was estimated to be approximately 20 ppm that is lower than the regulatory standards for the presence of lead in soil.     

Sensitive detection of salbutamol using europium-enhanced fluorescence with trioctylphosphine oxide (TOPO) as coligand

In this work a simple and sensitive fluorimetric method for determination of salbutamol (4-[2-(tert-butylamino)-1-hydroxyethyl]-2-(hydroxymethyl) phenol) using an Eu enhanced signal was developed. The employed methodology is based on the formation of a ternary complex formed with Eu, salbutamol and trioctylphosphine oxide (TOPO). Intermolecular transfer of energy from the excited organic molecule to the lanthanide followed by lanthanide emission is responsible for excitation of the lanthanide ion in complex solutions and fluorescent enhancement. The luminescence properties of the ternary complex formed with TOPO and optimum formation conditions were investigated. The calibration curve is linear in the range between 6.92-180 microg l(-1) of salbutamol. The detection limit was 2.31 microg l(-1). Common excipients for these formulations were not found to interfere. A proposed method for the assay in commercial aerosols and nebulizer solutions containing salbutamol was applied with very good precision.     

Gas chromatographic/mass spectrometric determination of mono- and dioctyltinchloride in aqueous solutions and biological samples

Summary A gas chromatographic/mass spectrometric method is described for the determination of mono- and dioctyltinchloride (MOTC and DOTC). Quantitative extraction from aqueous solutions was obtained with diethyl ether at pH=2. Several derivatization methods were tested. Grignard butylation in closed systems was most efficient. In the selected ion monitoring mode, the detection limits were 5 ng/ml for MOTC and 50 ng/ml for DOTC with a mean coefficient of variation of approximately 15%. Calibrations from different matrices were performed, e.g. from water, hepatocyte suspensions, urine and feces. The water solubility of DOTC was determined as 0.7 mg/l.     

Fluorescence studies of ternary complexes of Europium and Terbium and their application to analytical determinations

Europium and Terbium were found to form ternary complexes with ethylenediammine tetraacetic acid (EDTA) and ortho-phenanthroline (o-phen) in aqueous solution in the pH range of 6-8. These ternary complexes were found to have 1:1:1 composition and showed strong fluorescence properties. The method is made use of for the determination of these lanthanide ions in presence of excess amounts of other lanthanide ions. The lowest detection limit was calculated as 30 and 65 ng/ml of Tb(3+) and Eu(3+), respectively.     

Comparisons between LIBS and ICP/OES

In the framework of the development of new techniques, the ability of laser-induced breakdown spectroscopy (LIBS) to analyse remotely complex aqueous solutions was investigated. The jet configuration with a collimated gas stream was chosen because it appeared to be the most promising method for the LIBS probe, particularly in terms of sensitivity and repeatability. For emission collection, the echelle spectrometer offers a simultaneously recorded wavelength range from the UV to the near IR and is interesting for multielemental analysis for LIBS and also for inductively coupled plasma (ICP) optical emission spectroscopy (OES). The importance of parameters influencing the quantitative results of LIBS such as multispecies analysis, sheath gas, use of an internal standard and temporal parameters for analysis is described. LIBS quantitative data have been directly compared with results from the more standard ICP/OES technique.     

Determination of sub—ppm levels of boron in ground water samples by laser induced breakdown spectroscopy

Laser induced breakdown spectroscopy (LIBS) was applied to the determination of sub-ppm levels of boron in ground water samples using spectroscopically pure graphite planchets as solid support. The data obtained by LIBS agreed well with those from ICP-AES. No spectral interference due to the possibly interfering elements Fe, Cr, Al and Mo was observed. The detection limit was 0.01 µg.g^?1 for boron using the B(I) 249.773 nm emission line. The method is considered to be promising for the rapid determination of boron, with an acceptable degree of accuracy and without the need for elaborate sample treatment, preconcentration and purification steps.     

Combined LIBD and XAFS investigation of the formation and structure of Zr(IV) colloids

The solubility of Zr(OH)4(am)--in other words hydrated Zr(IV) oxyhydroxide--is determined by means of coulometric titration (CT), and colloids are detected by laser-induced breakdown when the solubility limit is exceeded. Our results at pH 3-8 demonstrate that the solubility of Zr(OH)4(am) is several orders of magnitude higher than reported classical solubility data for acidic solutions, determined from undersaturation with a less soluble microcrystalline Zr(IV) oxide precipitate. Analysis of extended X-ray absorption fine structure (EXAFS) data shows that the microcrystalline colloids in a 0.1 mol l(-1) Zr aqueous solution at pH 0.2 contain tetrameric units, similar to those present in the structure of ZrOCl2.8H2O. Characterization of the CT solutions by means of EXAFS shows that oligomeric species form as the solubility limit is approached. The current lack of data on equilibrium constants for polynuclear hydroxide complexes prohibits the use of a realistic speciation model to describe the solubility of pH-dependent Zr(OH)4(am). However, the solubility curve is obtained using the mononuclear hydrolysis constants estimated in the present paper, along with the solubility constant (log K'sp=-49.9+/-0.5 in 0.5 mol l(-1) NaCl; log K degrees(sp)=-53.1+/-0.5 at I=0).     

Thermodynamics of saturated lanthanide nitrate-water systems

The thermodynamic properties of saturated aqueous lanthanide nitrate solutions were determined using recently published critically evaluated solubility and activity data. The variation of the thermodynamic functions and congruent melting points as a function of atomic number are interpreted in terms of changes in inner sphere coordination number in both the solid hexahydrates and in the aquo ions, and in terms of the double-double effect.Inconsistencies in experimental solubility data are generally caused by uncertainties in solid phase composition which is shown to be due to the very small Gibbs energies accompanying transitions from stable to metastable systems differing in the number of hydrating water molecules.Presentation to First International Symposium on Solubility Phenomena, University of Western Ontario, London, Ontario, August 21–23, 1984.     

Analytical Analysis of Different Karats of Gold Using Laser Induced Breakdown Spectroscopy (LIBS) and Laser Ablation Time of Flight Mass Spectrometer (LA-TOF-MS)

Laser induced breakdown spectroscopy (LIBS) coupled with a laser ablation time of flight mass spectrometer (LA-TOF-MS) has been developed for discrimination/analysis of the precious gold alloys cartage. Five gold alloys of Karats 18K, 19K, 20K, 22K and 24K having certified composition of gold as 75, 79, 85, 93 and 99.99% were tested and their precise elemental compositions were determined using the laser produced plasma technique. The plasma was generated by focusing beam of a Nd:YAG laser on the target in air and its time integrated emission spectra were registered in the range 250–870 nm. The calibration free LIBS technique (CF-LIBS) was used for the quantitative determination of the constituent elements present in different Karats of gold. Elemental compositions of these gold alloys were also determined using a Laser Ablation time of flight mass spectrometer (LA-TOF-MS). The LIBS limit of detection was calculated from the calibration curves for copper, silver and gold. Results of CF-LIBS and LA-TOF-MS are in excellent agreement with the certified values. It is demonstrated that LIBS coupled with LA-TOF-MS is an efficient technique that can be used to analyze any precious alloys in a fraction of a second.     

Quantitative determination of DNA adducts using liquid chromatography/electrospray ionization mass spectrometry and liquid chromatography/high-resolution inductively coupled plasma mass spectrometry

The quantitative determination of nucleotides from DNA modified by styrene oxide is described using a combination of inductively coupled plasma high-resolution mass spectrometry (ICP-HRMS) and electrospray ionization mass spectrometry (ESI-MS), both interfaced to reversed-phase high-performance liquid chromatography (HPLC). LC/ICP-MS (resolution > 1500 to discriminate against 15N16O+ and 14N16OH+) was employed to determine quantitatively the content of modified nucleotides in standard solutions based on the signal of phosphorus; phosphoric acid served as an internal standard. By means of the standard addition technique the sensitivity of the LC/ESI-MS approach was subsequently determined. Since a comparison of UV, ICP and ESI-MS data suggested that in ESI-MS the ionization efficiency of the adducts is identical within the error limits, quantitative determination of all adducts is possible. For LC/ESI-MS with single ion monitoring, the detection limit for styrene oxide adducts of nucleotides was determined to be 20 pg absolute or 14 modified in 10(8) unmodified nucleotides in a 5 micrograms DNA sample, which comes close to the best methods available for the detection of chemical modifications in DNA.     

Investigations of actinides in the context of final disposal of high-level radioactive waste: trivalent actinides in aqueous solution

The speciation of redox sensitive trivalent actinides Pu(III), Np(III), and U(III) has been studied in aqueous solution. The redox preparation, stabilization, and speciation of these trivalent actinides in aqueous systems are discussed here. The reductants investigated were rongalite, hydroxylamine hydrochloride, and acetohydroxamic acid and the An(III) species have been characterized by UV–Vis and XANES spectroscopy. The results show that the effectiveness of stabilization decreases generally in the order Pu(III) > Np(III) > U(III) and that the effectiveness of each reducing agent depends on the experimental conditions. More than 80 % of Pu(III) aquo species have been stabilized up to pH 5.5, whereas the Np(III) aquo ion could be stabilized in a pH range 0–2.5, and U(III) aquo ion is sufficiently stable at pH 1.0 and below over time periods suitable for experiments. However, this study gives a basis for the characterisation of the trivalent lighter actinides involved in complexation, sorption, and solid formation reactions in the future.     

Enhanced luminescence of the europium/terbium/thenoyltrifluoroacetone/1,10-phenanthroline/surfactant system,and its analytical application

The enhanced luminescence of europium in a thenoyltrifluoroacetone/1,10-phenanthroline/Triton X-100 system in the presence of terbium is studied. The sensitivity is increased by two orders of magnitude, giving a detection limit of 1 × 10^?13 M. The optimized procedure is applied to the determination of europium in lanthanide oxide samples.     

Preliminary evaluation of laser induced breakdown spectroscopy for slurry samples

Laser-induced breakdown spectroscopy (LIBS) was applied to the analysis of simulant slurry samples used in the vitrification process of liquid radioactive wastes. A spectroscopic analysis was performed by two different detection systems: Czerny-Turner spectrometer coupled with intensified diode array detector (IDAD) and an Echelle spectrometer with intensified charge coupled device (ICCD). For the Czerny-Turner detection system, the normalized intensity method, which is the normalization of the atomic emission intensity by the released whole plasma emission area intensity, was employed to improve the reproducibility of LIBS signals. The Echelle detection system showed a high efficiency in simultaneous multi-element detection and determination of the physical quantities of the simulant.     

Detection of zinc and lead in water using evaporative preconcentration and single-particle laser-induced breakdown spectroscopy

A novel laser-induced breakdown spectroscopy (LIBS)-based measurement method for metals in water is demonstrated. In the presented technology a small amount of sodium chloride is dissolved in the sample solution before spraying the sample into a tubular oven. After water removal monodisperse dry NaCl aerosol particles are formed where trace metals are present as additives. A single-particle LIBS analysis is then triggered with a scattering based particle detection system. Benefits are the highly increased metal concentration in the LIBS focal volume and the static NaCl-matrix which can be exploited in the signal processing procedure. Emitted light from the emerged plasma plume is collected with wide angle optics and dispersed with a grating spectrometer. In an aqueous solution, the respective limits of detection for zinc and lead were 0.3 ppm and 0.1 ppm using a relatively low 14 mJ laser pulse energy. Zn/Na peak intensity ratio calibration curve for zinc concentration was also determined and LIBS signal dependence on laser pulse energy was investigated.