NONLINEAR THEORY OF MULTILAYER SANDWICH SHELLS AND ITS APPLICATION (Ⅰ)──GENERAL THEORY

In this paper, a nonlinear theory is given for multilayer sandwich shells undergoing small strains and moderate rotations. Then a simplified theory for the shells undergoing moderate or moderate/small rotations are obtained.     

An application of theoretical solutions about cylindrical shells with small openings

1　ＯｐｅｎｉｎｇｓｏｆＣｙｌｉｎｄｒｉｃａｌＳｈｅｌｌｓＴｈｅｐｒｏｂｌｅｍｏｆｃｙｌｉｎｄｒｉｃａｌｓｈｅｌｌｓｗｉｔｈｏｐｅｎｉｎｇｓｉｓｏｎｅｏｆｔｈｅｉｍｐｏｒｔａｎｔｑｕｅｓｔｉｏｎｓｔｏａｃａｄｅｍｉａａｎｄｅｎｇｉｎｅｅｒｉｎｇ .Ｉｎｆｉｆｔｙｙｅａｒｓｏｆｉｔｓｄｅｖｅｌｏｐｅｄｈｉｓｔｏｒｙ ,ｇｒｅａｔｅｆｆｏｒｔｓｗｅｒｅｍａｄｅｂｙｍａｎｙａｕｔｈｏｒｓｔｏｏｂｔａｉｎｓｏｌｕｔｉｏｎｓｆｏｒｔｈｉｓｐｒｏｂｌｅｍ[1].Ｔｈｉｓｐｒｏｂｌｅｍｃａｎｂｅｄｉｖｉｄｅｄｉｎｔｏ…     

Timoshenko-Type Theory in the Stability Analysis of Corrugated Cylindrical Shells

A technique is proposed for stability analysis of longitudinally corrugated shells under axial compression. The technique employs the equations of the Timoshenko-type nonlinear theory of shells. The geometrical parameters of shells are specified on discrete set of points and are approximated by segments of Fourier series. Infinite systems of homogeneous algebraic equations are derived from a variational equation written in displacements to determine the critical loads and buckling modes. Specific types of corrugated isotropic metal and fiberglass shells are considered. The calculated results are compared with those obtained within the framework of the classical theory of shells. It is shown that the Timoshenko-type theory extends significantly the possibility of exact allowance for the geometrical parameters and material properties of corrugated shells compared with Kirchhoff–Love theory.     

任意形状薄壳统一的非线性稳定性方程

从文献（１）任意曲线坐标系中任意形状壳体非线性理论的普适平衡方程出发，导出了任意曲线坐标中任意形状壳体的非线性稳定笥方程手统一形式。     

波纹壳的摄动解法

应用扁锥壳的非线性大挠度理论,研究了在均布载荷和中心集中载荷下,具有光滑中心的锯齿形和梯形波纹壳,采用摄动法和幂级数方法,得到了波纹壳的弹性特征。本文的解答符合实验结果。     

复合材料层合板壳非线性力学的研究进展

复合材料层合板壳是由多种组分材料组合而成.与单一材料的板壳结构相比,它无明确的材料主方向,各层间材料间断和不连续,具有明显的几何非线性和材料非线性等新的特点.其失效模式也远比单一材料的情况复杂,具有如基体开裂、脱胶、分层、分层裂纹偏转、多分层以及分层传播等多种模式.各国学者基于不同的考虑,提出了多种方法研究复合材料层合板壳的失效.首先,在简要介绍了层合板壳线性力学基本理论的基础上,重点回顾了层合板壳结构非线性力学几种基本理论发展的过程,主要阐述了经典大挠度非线性理论、一阶剪切变形理论、高阶剪切变形理论、锯齿理论、广义分层理论的理论体系及基本公式,并对几种理论之间的联系和差异进行了总结;其次,介绍了当前层合结构非线性领域的研究进展,综述了典型复合材料板壳结构的失效机理及优化设计、复合材料板壳结构在复杂环境下的破坏机理、复合材料板壳结构的物理非线性、含脱层纤维增强复合材料板壳结构的破坏机理等各研究热点的最新研究成果;最后,对该领域未来的研究方向进行了展望.     

A new higher-order theory to laminated plates and shells

In this paper a new higher-order theory to laminated plates and shells is presented and then Symmetric and antisymmetric cross-ply laminated plates, cylindrie bending and bending of spherical shells are also studied. In order to examine the accuracy of the theory, several particular examples have been calculated. The numerical results are in good agreement with the exact solution, which shows the theory is possessed of higher accuracy and is easy to solve a problem with few unknowns.     

Elastoplastic stress analysis for cylindrical shell with flat strip imperfection

Based on unequidistant B-spline function, generalized spline subdomain displacement mode of rotational shell is obtained by taking double-direction interpolation of spline. The elastoplastic constitutive equation of shells is established by using the endochronic theory.According to the initial deflection theory of shells, the elastoplastic stress analysis of cylindrical shells with flat strip geometrical imperfection is studied. Numerical results show that the geometrical imperfection has a great effect on the stress distribution of shells.     

High-frequency response of isotropic-laminated cylindrical shells modeled by a layer-wise theory

In this paper, the high-frequency response of isotropic-laminated cylindrical shells is investigated using a layer-wise theory. The cylindrical shell is discretized in an arbitrary number of layers in the radial direction, and a three-dimensional stress state is assumed in each layer. Approximate numerical results obtained by the layer-wise theory are compared with the exact wave-dispersion analytical results. The very good agreement between approximate and exact results indicates that the layer-wise theory can accurately describe of the dynamic response of cylindrical shells in the high-frequency (short-wavelength) range.     

轴对称载荷下正交异性圆环壳的一般解

本文导出了在Kirchhoff假设下受轴对称载荷时、材料正交异性的圆环壳的复变量方程,给出了该方程的一般解,该解可用于α=a/R<1,其中a为环壳截面的半径,R为环壳的总体半径,文中并举例说明其应用,结果表明本文所提出的解是很有效的。     

双曲率壳的力学研究进展

双曲率壳是飞机、汽车以及船舶上常见的薄壁结构，其中性面可看作是一条动曲线沿着另一条曲线扫掠所形成的曲面．双曲率壳的非线性理论不断更新推动着双曲率壳力学行为的研究．随着工程实际应用的不断改进，如功能梯度材料(FGM)，加筋壳，弹性地基模型等的引入，双曲率壳在强度、变形和稳定性等方面的研究得到了进一步促进．本文首先回顾了双曲率壳结构非线性力学基本理论发展过程，主要阐述了经典的二维板壳理论，如Donnell 薄壳理论，一阶剪切变形壳理论，高阶剪切变形壳理论，和三维板壳理论的理论体系及基本公式，并对几种理论之间的联系和应用进行了总结和讨论，简述了近几十年来国内外学者在双曲率壳非线性弯曲、稳定性和振动等方面的最新研究成果，最后对双曲率壳体研究目前的局限性和未来的研究方向进行了探讨．     

Calculating the thermoelastic stress state of medium-thickness shells of revolution

Analytic and numerical analyses are carried out to ascertain whether the theories of thin and medium-thickness shells can be used to calculate the thermoelastic state of shells of revolution. It is shown that the theory of thin shells should be used in the case of thermal loading and the theory of medium-thickness shells in the case of mechanical loading __________ Translated from Prikladnaya Mekhanika, Vol. 44, No. 5, pp. 58–67, May 2008.     

Green函数法在轴对称板壳理论中的应用

本文从轴对称板壳理论的基本方程出发,通过建立Green函数,导出了轴对称线载荷下解的一般表述式,由此可以求出任意轴对称载荷下的解,然后本文分别讨论了圆板和扁球壳受线载问题的解,文中的结果适用于各种边界条件。     

圆柱薄壳稳定性的一个修正理论

著名的唐乃尔(Donnell)——穆什塔利的简化壳体理论只能较精确地适用于较短圆柱壳稳定性计算.其近似性误差随长度与半径之比的增加而增大.本文考虑了横向切力的影响,对非完善型圆柱壳体推导了几何非线性理论的基本方程,建立了对各种长度半径比的圆柱壳体稳定性均适用的修正理论.     

Non-linear thermal stability of bimetallic shallow shells of revolution

In this paper, a theory for non-linear thermal stability of open bimetallic shallow shells of revolution under a uniform temperature field is developed. To apply the theory to the particular case of some elastic elements in precision instruments, this paper discusses two important kinds of shells, the bimetallic shallow spherical shell with a circular hole at the center and the bimetallic truncated shallow conical shell. The more accurate solutions are obtained by the modified iteration method. All results are expressed in curves which may be applied directly to the design of the elastic elements.     

基于混合变量条形传递函数方法的圆柱壳屈曲分析

提出了一种分析交各向异性圆柱壳和阶梯圆柱壳稳定性问题的混合变量条形传递函数方法。首先基于Fluegge薄壳理论，通过定义广义位移变量和对应的广义力变量，建立了圆柱壳混合变量能量泛函；然后通过引入条形单元，定义混合状态变量和采用传递函数方法对超级壳单元求解，得到具有多种边界条件圆柱壳屈曲问题的半解析解；最后通过位移连续和力平衡条件，可以得到阶梯圆柱壳屈曲问题的解。理论解推导过程表明此方法在引入边界条件和进行阶梯圆柱壳求解时非常方便。算例分析的结果验证了本方法的正确性。     

薄壳问题的三维虚边界元解法

直接从三维弹性力学微分方程出发,依据三维的Kelvin解,应用最小二乘法建立了三维虚边界元法解薄壳问题的一般方法。本方法的显著优点是：不论求解何种壳体问题,方法的思想是不变的,均以三维的Kelvin解来建立方程,而勿需对不同几何形状的壳体采用不同的基本解。文中给出了数值算例,以作为本方法的应用。本文方法与边界元直接法相比,优点在于无需处理奇异积分,且系数阵是对称的;再者,本文方法思想简单,程序实现容易。     

A new displacement-type stability equation and general stability analysis of laminated composite circular conical shells with triangular grid stiffeners

In this paper,based on the theory of Donnell-type shallow shell,a new displacement-type stability equations is first developed for laminated composite circular conical shellswith triangular grid stiffeners by using the variational calculus and generalized smeared-stiffener theory.The most general bending stretching couplings,the effect of eccentricity ofstiffeners are considered.Then,for general stability of composite triangular grid stiffenedconical shells without twist coupling terms,the approximate formulas are obtained forcritical external pressure by using Galerkin‘s procedure.Numerical examples for a certainC/E composite conical shells with inside triangular grid stiffeners are calculated and theresults are in good agreement with the experimental data.Finally,the influence of someparameters on critical external pressure is studied.The stability equations developed andthe formulas for critical external pressure obtained in this paper should be very useful in theastronautical engineering design.     

集中载荷作用下具有光滑中心波纹膜片的非线性分析

波纹膜片是一种薄壳弹性体，由于它的参数很多，又相互制约，所以使得它的设计很复杂。在大多数位移式仪器仪表中，要求波纹膜片产生至少和膜片厚度是同样数量级的弹性位移。这就要求使用薄壳的几何非线性理论进行分析。大多数学者研究波纹膜片的弯曲问题，是采用扁壳理论讨论具有浅波纹的膜片。而工程实际中，经常遇到深波纹膜片，这就要求从一般壳体大挠度方程进行求解。本文采用轴对称旋转壳体的简化Re-issner方程。研究了在中心集中载荷作用下具有光滑中心波纹膜片的非线性弯曲问题。应用积分方程方法，可以获得膜片的特征关系（载荷-中心挠度关系）和应力分布。文末给出实例计算的数值结果。