Experimental Study of MQW RCE Photodetector

1　Ｉｎｔｒｏｄｕｃｔｉｏｎ　　Ｔｈｅｉｎｃｒｅａｓｉｎｇｄｅｍａｎｄｓｆｏｒｉｎｆｏｒｍａｔｉｏｎｔｒａｎｓｆｅｒｈａｖｅｌｅｄｔｏａｇｒｅａｔｄｅａｌｏｆｉｎｔｅｒｅｓｔｉｎｗａｖｅｌｅｎｇｔｈ ｄｉｖｉｓｉｏｎｍｕｌｔｉｐｌｅｘｉｎｇ (ＷＤＭ )ｓｃｈｅｍｅｓｆｏｒｆｉｂｒｅ ｏｐｔｉｃｃｏｍｍｕｎｉｃａｔｉｏｎｓ.Ｒｅｓｏｎａｎｔｃａｖｉｔｙｅｎｈａｎｃｅｄ (ＲＣＥ )ｐｈｏｔｏｄｅｔｅｃｔｏｒｓ ,ｆｏｒｔｈｅｉｒｒｅｍａｒｋａｂｌｅｗａｖｅｌｅｎｇｔｈｓｅｌｅｃｔｉｖｉｔｙａｎｄｉｎｃｒｅａｓ…     

Impact of a Post-OTDM-Demultiplexing Optical Filter on Dense OOK OTDM-WDM Transmission

The impact of a post-OTDM-demultiplexing optical filter on the performance of dense on-off keying (OOK) optical time division multiplexing (OTDM)—wavelength division multiplexing (WDM) systems was studied. For return-to-zero (RZ) modulation, it was found that the additional filter working in a double-tier filter configuration did not offer any significant improvements to performance when the signal pulse width is optimized. Improvements generally increase only when the signal pulse width deviates from its optimal value and only for low spectral densities. For ideal non-return-to-zero (NRZ) modulation, however, significant improvements of around 1 dB are obtained using the double-tier configuration over a large range of spectral densities.     

Remotely Pumped Hybrid Amplifiers for Extended Bidirectional Passive Optical Networks

In this contribution, we optimize design parameters of hybrid optical amplifiers utilizing distributed Raman amplification in transmission fiber and gain of discrete, remotely pumped erbium-doped fiber amplifier (EDFA) for wideband, bidirectional operation in metropolitan area networks (MAN). The design is based on an application of a numerical model, which takes into account pump-to-pump and signal-to-signal interactions and generation of amplified spontaneous emission in the Raman amplifier and solves the standard rate-propagation equations in an erbium-doped fiber (EDF). We predict 12 dB gain across 72 nm of optical bandwidth with gain ripple better than 10%. The recently proposed serial topology of EDFA is considered; this enables the wideband, bidirectional operation of a hybrid amplifier with only two pump laser diodes emitting in the 1430 and 1480 nm bands.     

Transient Response and Control of Pump-Reflecting Raman Fiber Amplifiers

Abstract

This article analyzes the transient effect in pump-reflecting Raman fiber amplifiers. In order to better understand the impact of reflecting the unused pump power in the amplifier behavior, several scenarios are investigated. Results show that this pumping scheme has a worse response to dynamic channel add/drop. However, a pump-controlled gain-locked system is proposed that is able to mitigate the amplifier transient response. Following this approach, an efficient low-cost Raman fiber amplifier suitable for dynamic optical networks is obtained.     

All-optical wavelength converters for optical switching applications

We present the latest results about all-optical wavelength conversion obtained within the European Union—funded RACE ATMOS project. In particular, solutions based on carrier depletion in Distributed Brag Reflector lasers have reached penalty-free polarization-insensitive operation at up to 2.5 Gbit/s, while solutions based on Semiconductor Optical Amplifiers (SOAS) under cross-gain modulation have been demonstrated at more than 20 Gbit/s. The study of cross-phase modulation in SOAs has also been performed, leading to the monolithic integration of SOAs within an interferometer, according to structures proposed by the project. Penalty-free operation at up to 10 Gbit/s as well as signal reshaping have been obtained with such devices. Besides the study of components, wavelength converters have been used in several demonstrators assessing their maturity and compatibility with photonic-switching applications.     

Analysis of all optical cascaded XGM wavelength converter using CW-holding beam

In this paper, we propose and analyze a wavelength conversion using an cross-gain modulation (XGM) with two semiconductor optical amplifiers and CW-holding beam for improvement of wavelength conversion speed and frequency chirp characteristics. Wavelength conversion characteristics of the cascaded XGM with a CW-holding beam are investigated in time domain. From the simulation, we have observed that the proposed scheme provides a non-inverted efficient wavelength conversion and frequency chirp reduction at higher bit rate operation.     

Dense wavelength division demultiplexing using photonic crystal waveguides based on cavity resonance

We demonstrated a photonic crystal waveguide based dense wavelength division multiplexing device using the resonances in the cavities. The demultiplexing is achieved through filtering. This filtering is achieved by varying the radii of the surrounding holes of the cavity, which in turn changes the resonant wavelength of the cavity. The four wavelengths demultiplexed in the design are 0.8 nm apart in the optical region centered on 1.55 and 1.56 μm. The device designed and simulated has easy to realize structure as well as high quality factor. Two-dimensional Finite Difference Time Domain (FDTD) is chosen to do the simulation of this work.     

Tunable wavelength converters based switching structure for WDM-TDM hybrid PON

In the evolvement of Passive Optical Network (PON), the performance of hybrid Wavelength-Time Division Multiplexing based PON (WDM-TDM PON) is directly determined by the network architecture. This letter proposes a Tunable Wavelength Converter (TWC) based switching structure (TWC-SS) for WDM/TDM hybrid PON. Using the tunable wavelength converter technology, this Switch Node is designed and introduced into the hybrid WDM/TDM PON. Improved performances brought by the Switch Node on packet loss rate, bandwidth-utilization rate are proved by experimental results.     

密集波分复用(DWDM)、光学交叉互连(OXC)和全光通讯网络(AON)

本文介绍了全光网（AON）的基本结构和特点，介绍了全光网的两种关键部件－密集波分复用（DWDM）和光学交叉互连（OXC），讨论了各种方案的物理模型、工作原理和应用，并展望了光通讯的发展趋势。     

Wavelength conversion in optical transport networks

The introduction of optical technology in the path layer of a transport network is analyzed; in particular, the impact of all-optical wavelength conversion is examined. Two basic optical cross-connect schemes based on space switching and on wave-length switching, respectively, and two types of wavelength converters are considered. The wavelength converters are, respectively, based on four-wave miring (FWM) in semiconductor optical amplifiers (SOAs) and on cross-phase modulation (XPM) obtained by two SOAs put in an interferometric configuration. An analysis of transmission performances of optical transport networks employing both types of wavelength conversion and both the node architectures is reported. The performances are evaluated by means of a system modeling that facilitates considering physical phenomena occurring during transmission and all the important transmission impairments. The analysis reveals that both the types of converters can be employed with different features and limitations, according to the considered network and switching architecture.     

Transmission Characteristics of Several Kinds of Filters for WDM Optical Networking

１ＩｎｔｒｏｄｕｃｔｉｏｎＷａｖｅｌｅｎｇｔｈｄｉｖｉｓｉｏｎｍｕｌｔｉｐｌｅｘｉｎｇ（ＷＤＭ）ｉｓａｃｏｓｔｅｆｅｃｔｉｖｅｗａｙｔｏｍａｋｅｆｕｌｕｓｅｏｆｔｈｅｂｒｏａｄｂａｎｄｗｉｄｔｈｏｆｔｈｅｏｐｔｉｃａｌｆｉｂｅｒｗｈｅｎｔｈｅｔｒ...     

Tunable optical switch for DWDM systems

Characteristics of optical gratings on Si/SiGe heterostructures for switchable optical band-pass filters will be discussed. The grooves of the gratings have an angle of 45° to the propagation of light. The bandwidth can be as low as 0.2 nm. By reducing the refractive index of the SiGe layer due to injected free carriers it is possible to move the transmission band to lower wavelengths. In dense wavelength division multiplexing (DWDM) systems transmission channels can be selected by tuning the current. Therefore, the structure can be used as an electronic adjustable switch.     

Beyond 90-km Reach of a 16 × 2.5 Gb/s C/L-band Dense Wavelength-Division Multiplexing Metropolitan Network Based on Self-Seeded Reflective Semiconductor Optical Amplifiers

Abstract

This article reports the operation of a cost-effective, colorless, dense wavelength-division multiplexing metropolitan network based on self-seeded reflective semiconductor optical amplifiers. All reflective semiconductor optical amplifiers used in the experiments are packaged in commercial small form-factor pluggable modules. The proposal architecture is simple and symmetric thanks to utilization of two cyclic array waveguide gratings. Downstream link functions in the C-band wavelength range and the upstream link functions in the L-band wavelength range. By using erbium-doped fiber amplifiers to extend the reach, an error-free transmission over 90 km for 16 channels at 2.5 Gb/s was experimentally demonstrated for both directions, and an optical budget over 35 dB was obtained.     

Ultrafast and Wideband All-Optical Processing Technologies Towards Flexible Photonic Networks

Recent progress in ultrafast and wideband all-optical processing technologies to realize flexible and transparent optical time-division multiplexing (OTDM)/wavelength-division multiplexing (WDM) photonic networks is reviewed covering ultrafast OTDM technologies handling more than 100 Gbit/s per wavelength channel and wideband WDM technologies handling more than 1000 wavelength channels over the 200 nm range.     

Tbit/s超大容量光纤通信系统的研究进展

Tbit/s超大容量光纤传输系统促进了光纤通信技术的发展。综述了采用波分复用技术(WDM)、光时分复用技术(OTDM)和WDM/OTDM混合方式的Tbit/s超大容量光传输系统的研究现状、技术实现方式及研究的最新进展。对各种传输系统的优缺点进行了评价,对Tbit/s光纤通信系统的前景作了展望。     

A new synchronization scheme based on time division multiplexing and wavelength division multiplexing technology for practical quantum key distribution system

Three clock synchronization schemes for a quantum key distribution system are compared experimentally through the outdoor fibre and the interaction physical model of the the clock signal and the the quantum signal in the quantum key distribution system is analysed to propose a new synchronization scheme based on time division multiplexing and wavelength division multiplexing technology to reduce quantum bits error rates under some transmission rate conditions.The proposed synchronization scheme can not only completely eliminate noise photons from the bright background light of the the clock signal,but also suppress the fibre nonlinear crosstalk.     

基于双通构型的和频、差频可变波长路由方案及其应用

提出了双通构型的基于“和频”和“差频”级联二阶非线性效应的可变波长路由方案,通过调节两个抽运源的频率,可以从一个WDM(wavelength division multiplexing)链路中取出任意一个信道,然后将其转换为任意一个波长并插入到另一个WDM链路中去.实现了可调谐波长转换和光波长路由的结合.通过小信号分析,给出了相位匹配情况下,输入信号光在波导中功率变化的表达式和输出转换光功率变化的表达式,并给出了提高系统效率的对两个抽运光功率的优化方案.数值计算表明,只要信道间隔大于02nm(25GHz 关键词： 光波长路由 光波长转换 光交换 PPLN     

基于双通构型的和频、差频可变波长路由方案及其应用

提出了双通构型的基于“和频”和“差频”级联二阶非线性效应的可变波长路由方案，通过调节两个抽运源的频率，可以从一个WDM(wavelength division multiplexing)链路中取出任意一个信道，然后将其转换为任意一个波长并插入到另一个WDM链路中去.实现了可调谐波长转换和光波长路由的结合.通过小信号分析，给出了相位匹配情况下，输入信号光在波导中功率变化的表达式和输出转换光功率变化的表达式，并给出了提高系统效率的对两个抽运光功率的优化方案.数值计算表明，只要信道间隔大于02nm(25GHz     

高效异质结构四波长波分复用器的设计与优化

将两光子晶体单模波导平行、邻近放置构成一个光子晶体波导耦合结构.根据耦合和解耦合理论,设计了一种新型的高效异质结构四波长波分复用器.应用时域有限差分法模拟了该器件的效率,并通过改变一排介质柱的折射率,实现了较高的透射率.进一步发现在入射口处添加三对介质柱,可以有效地降低系统的反射,实现了四个波长的高效传输,四个波长的透射率均超过了90%.该器件不仅具有较高的透射率,而且其尺寸仅为36 μm×17 μm,在未来的光子集成回路中具有潜在的应用价值. 关键词： 光子晶体波导 耦合 异质结构 波分复用