Hydroarylation of cinnamic acid with phenols catalyzed by acidic ionic liquid [H-NMP]HSO<Subscript>4</Subscript>: computational assessment on substituent effect

Hydroarylation of cinnamic acid with different substituted phenols, in the presence of acidic ionic liquid, N-methyl-2-pyrrolidonum hydrosulfate ([H-NMP]HSO₄) gave the corresponding dihydrocoumarins in high yields and excellent selectivity. Among these substituted phenols, while methyl phenol afforded the corresponding dihydrocoumarin, nitrophenol under the same reaction conditions diverted the course of reaction, affording 3-(4-nitrophenyl)-3-phenylpropanoic acids. We investigated this behavior from the energetic and electronic points of view, using quantum chemistry computational methods. In this respect, the electronic energy change values for the conversion reaction of substituted phenyl cinnamate esters to dihydrocoumarin compounds have been obtained via density functional theory calculations. We demonstrated that the conversion reaction in the presence of CH₃ substituent is more favorable energetically than NO₂ substituent. Moreover, we have concentrated on topological analysis of electron density on some key bond and ring critical points and their associated bond paths to assess the conversion of substituted phenyl cinnamate esters to dihydrocoumarins. Our calculated results showed that para-methyl phenyl cinnamate has more of electronic tendency to undergo the intramolecular cyclization step and, consequently, generate the corresponding dihydrocoumarin.     

Synthesis and characterisation of the platinum complexes [PtCl(CClPAr)(PPh3)2] and [PtCl(CClPAr′)(PPh3)2] as potential intermediates in the preparation of phosphaalkynes

Oxidative addition reactions of Cl₂CPR (R = 2,4,6-tris(trifluoromethyl)phenyl (Ar) or 2,6-bis(trifluoromethyl)phenyl (Ar′) with Pt(PPh₃)₄ yield the cis and trans (at platinum) complexes [PtCl(ClCPAr)(PPh₃)₂] and [PtCl(ClCPAr′)(PPh₃)₂]. All starting materials and intermediates have been characterised by NMR spectroscopy. The crystal and molecular structures of the trans-platinum complexes have been determined by single-crystal X-ray diffraction at low temperature.     

Multicomponent reactions involving p-benzoquinones, diazo esters, titanium(IV) isopropoxide and alcohol in the presence of rhodium(II) acetate as catalyst

A Rh₂(OAc)₄ catalyst derived oxonium ylide intermediate underwent nucleophilic addition with the CC or CO bond of p-benzoquinones. The syntheses of 2-substituted hydroquinones and 1-hydroxy-4-oxocyclohexa-2,5-dienyls have been demonstrated.     

Physical and chemical characterization and ionic conductivity of rapidly quenched glasses in the Sb2S3Ag2SAgI system

The glass-forming regions in the Sb₂S₃Ag₂SAgI ternary system have been determined after rapid roller quenching. Some physical chemical properties including density, thermal behavior, transport number, ionic conductivity, electrochemical stability, and IR absorption spectra have been investigated. The best conductivity obtained is 0.06 (Ω-cm)⁻¹ for a molar composition: 0.03Sb₂S₃0.57Ag₂S0.40AgI with an activation energy of 0.15 eV. The transport number measurements show that the glasses are essentially ionic conductors (0.991–0.998 as determined by an emf method). Using the triangular voltammetry method the redox stability domain has been determined; it is about 2 V for a current density of 0.1 mA/cm². A glass model structure has been proposed on the basis of the infrared spectra.     

Synthesis, characterization, and steric hindrance comparisons of selected transition and main group metal β-ketoiminato complexes

The coordination preference of the ketoiminato ligand, RN(H)(C(Me))₂C(Me)O, (R = 2,6-diisopropylphenyl, (Dipp)), L¹, and RN(H)C(Me)CHC(Me)O, R = C₂H₄NEt₂, L², have been investigated with a range of d and p block metal halides, (or alkyls), to compare and contrast products obtained from the bulky ketoiminato ligand, L¹, versus the less bulky, but multidentate ligand, L². The products have been characterized by X-ray crystallography along with other spectroscopic techniques and show how the preferred metal geometry remains constant for products with either ligand, but the steric protection offered by the individual ligands governs the nuclearity of the products, affording monomers, dimers and tetramers.     

Synthesis and characterization of (CHCH)n-bridged (n = 1, 2, 3) heterobimetallic and trimetallic ferrocene-ruthenium complexes

A series of heterobinuclear ferrocene-ruthenium complexes Fc(CHCH)_nRuCl(CO)(PMe₃)₃ (n = 1, 3; n = 2, 12), Fc(CHCH)RuCl(CO)(Py)(PPh₃)₂ (4), and trimetallic Fc(CHCH)RuCl(CO)(PPh₃)₂(Py-E-(CHCH)Fc) (6) have been prepared. The length of the molecular rods is extended by successive insertion of CHCH spacers in the bridging ligands or the ancillary ligands. The respective products have been fully characterized and the structures of 3 and 12 have been established by X-ray crystallography. Electrochemical studies have revealed that ethenyl heterobimetallic complexes display two successive one-electron processes, and that intermetallic electronic communication between the two endgroups is attenuated with the increase of the length of the conjugated bridge. The electrochemical behavior of the trimetallic complex reveals strong electronic communication between ruthenium and ferrocene transmitted through the ethenyl bridge, however, it also reveals a very weak interaction between ruthenium and ferrocene transmitted through the (E)-CHCH-Py bridge.     

DFT study of the IR and Raman spectra of a fluorescent dendron built from cyclotriphosphazene core

Combined experimental and theoretical studies on molecular structure of the zero generation dendron, built from the hexafunctional cyclotriphosphazene core, with five OC₆H₄(CH₂)₂NHSO₂C₁₀H₆N(CH₃)₂ terminal groups and one oxybenzaldehyde group G₀ are reported. The Fourier transform Raman and IR spectra of G₀ have been recorded. Conformations of low energy isomers of G₀ have been studied at quantum-chemical level. The optimized geometry has been calculated by density functional (DFT) method at the PBE/TZ2P level of theory. The theoretical geometrical parameters, harmonic vibrational frequencies, IR intensities and Raman scattering activities are predicted in a good agreement with the experimental data. It was found that dendron molecule G₀ has a concave lens structure with planar OC₆H₄CHO fragments and slightly non-planar cyclotriphosphazene core. Relying on DFT calculations the bands of the core and terminal groups were assigned. The frequencies of ν(NH) bands in the IR spectrum reveal the presence of the H-bonds in the dendron.     

Trifluoromethanesulfonylimides of arenehydroxamic acids and their aza Lossen rearrangement

Trifluoromethanesulfonylimides of arenehydroxamic acids ArC(NSO₂CF₃)NHOH (1), analogues of arenehydroxamic acids, in which sp² hybridized oxygen atom is replaced by the much stronger electron-withdrawing group NSO₂CF₃, have been synthesized, and the abilities of these compounds to undergo transformations similar to the Lossen rearrangement have been studied.At heating O-trimethylsilyl or O-tosyl derivatives of acids 1 rearrange to carbodiimides ArNCNSO₂CF₃ or products of their hydration, the corresponding carbamides. Interaction of acids 1 with sulfinyl chloride or phosphorus pentachloride results in formation of N-trifluoromethylsulfonyl-N′-arenechloroformamidines, ArNHC(Cl)NSO₂CF₃, which were transformed into their morpholine derivatives and thus characterized.     

Further chemistry of ruthenium butatrienylidene complexes

Several complexes have been obtained from reactions carried out in early attempts to prepare the diynyl complexes Ru(CCCCR)(dppe)Cp* (R = H, SiMe₃). These have been identified crystallographically as the acyl complex Ru{CCC(O)Me}(dppe)Cp* (3), the cationic imido complex [Ru{CCC(NH₂)Me}(dppe)Cp*]PF₆ (4), the binuclear butenynylallenylidene [{Ru(dppe)Cp*}₂{μ-CCC(OMe)CHCMeCC}]PF₆ (5), and the bis(ethynyl)cyclobutenylidene [{Ru(dppe)Cp*}₂{μ-CCC₄H₂(SiMe₃)CC}]PF₆ (6). NMR studies of 5 have revealed the existence of two isomers. Plausible routes for their formation from the putative butatrienylidene intermediate [Ru(CCCCH₂)(dppe)Cp*]⁺ (A) are discussed.     

DFT study on the unsaturated germylenoid H2CGeNaF

The unsaturated germylenoid H₂CGeNaF was studied by using the DFT B3LYP method in conjunction with the 6-311+G(d, p) basis set. Geometry optimization calculations indicate that H₂CGeNaF has three equilibrium configurations, in which the p-complex is the lowest in energy and is the most stable structure. Two transition states for isomerization reactions of H₂CGeNaF are located and the energy barriers are calculated. For the most stable one, vibrational frequencies and infrared intensities have been predicted.     

Synthesis, characterization and reactivity studies of the new compound [Os3(CO)9(μ3-η,η,η-{C5H5FeC5H3CCC(S)C(Fc)CHO}]

Processes such as S-C and C-H bond activations as well as C-C coupling reactions have taken place in the synthesis of the new compound [Os₃(CO)₉(μ₃-η²,η³,η³-{C₅H₅FeC₅H₃CCC(S)C(Fc)CHO}] (Fc = C₅H₄FeC₅H₅), which contains an aldehyde oxametallacycle. A reactivity study of it has been carried out. In addition, other new triosmium clusters such as [Os₃(CO)₉(μ₃,η²-CCFc)(μ,η¹-SCCFc)], [Os₃(CO)₁₀(μ,η²-CCFc)(μ,η¹-SCCFc)] and [Os₃(CO)₉(μ-CO)(μ₃,η²-FcCCSCCFc)] have been prepared from the reaction of [Os₃(CO)₁₀(NCMe)₂] and FcCCSCCFc. All the compounds have been characterized by analytical and spectroscopic techniques. The crystal structures of [Os₃(CO)₉(μ₃,η²-CCFc)(μ,η¹-SCCFc)] and [Os₃(CO)₉(μ₃-η²,η³,η³-{C₅H₅FeC₅H₃CCC(S)C(Fc)CHO}] have been determined by X-ray crystallography and some electrochemical studies have also carried out.     

Quantification of the push-pull character of azo dyes and a basis for their evaluation as potential nonlinear optical materials

The push-pull characters of a large series of donor-acceptor substituted azo dyes—71 structures in all—have been quantified by the NN double bond lengths, d_NN, the ¹⁵N NMR chemical shift differences, Δδ_15N, of the two nitrogen atoms and the quotient, π^∗/π, of the occupations of the antibonding π^∗, and bonding π orbitals of this partial NN double bond. The excellent correlation of the occupation quotients with the bond lengths strongly infers that both π^∗/π and d_NN are excellent parameters for quantifying charge alternation in the push-pull chromophore and the molecular hyperpolarizability, β₀, of these compounds. By this approach, selected compounds can be appropriately considered as viable candidates for nonlinear optical (NLO) applications.     

Highly chemo- and stereoselective glycosidation of permethacrylated O-glycosyl trichloroacetimidate reagents promoted by TMSNTf2

TMSNTf₂ has been used efficiently as a promoter in glycosidation reaction involving permethacrylated Schmidt reagents. While TMSNTf₂ is known to be a powerful activator for CO double bonds, we have discovered that this reagent can activate CN double bond selectively, even in the presence of excess CO groups of permethacrylated O-glycosyl trichloroacetimidate substrates. Glycosides are synthesized in moderate to reasonable yields with an excellent overall β-stereoselectivity.     

Solvent and phosphine dependency in the reaction of cis-RuCl2(P-P)2 (P-P = dppm or dppe) with terminal alkynes

Reaction of cis-[RuCl₂(dppm)₂] (dppm = 1,2-bis(diphenylphosphino)methane) with PhCCH and NaPF₆ utilising methanol as solvent results in the formation of the η³-butenynyl complex [Ru(η³-PhCCCCHPh)(dppm)₂][PF₆] in good yield. Similar reactions with Bu^tCCH and PrⁿCCH resulted in the corresponding alkyl-substituted complexes and all three of these compounds have been characterised by NMR spectroscopy and X-ray crystallography. The mechanism of this reaction has been probed by employing labelling experiments with both PhCCD and PhC¹³CH allowing the identity of possible intermediates in the reaction to be determined. Furthermore, [Ru(η³-PhCCCCHPh)(dppm)₂][PF₆] has been shown to be an effective regio- and stereo-selective catalyst for the dimerisation of PhCCH to Z-PhCCCHCHPh in the absence of solvent. In contrast, no evidence for the formation of alkyne coupling was obtained from the reaction of cis-[RuCl₂(dppe)₂] (dppe = 1,2-bis(diphenylphosphino)ethane) with PhCCH and NaPF₆.     

New cyclic and macrocyclic silaolefins via ring-closing metathesis of 1,1-bis(silyl)ethene-tethered dienes

Dialkenyl-substituted 1,1-bis(silyl)ethenes of the general formulae (CH₂CH(CH₂)_nMe₂Si)₂CCH₂ and (CH₂CH(CH₂)_nOMe₂Si)₂CCH₂, (where n = 1-3) have been successfully converted into new silacyclic or silamacrocyclic compounds in the presence of ruthenium-benzylidene complex (first generation Grubbs catalyst). The structures of both macrocyclic silaolefins have been confirmed using X-ray diffraction.     

DFT study on second-order nonlinear optical properties of the derivatives of 7-vertex cobalt–carborane metallocenyl

Density functional theory (DFT) B3LYP method was employed to calculate electron properties and the second-order nonlinear optical (NLO) responses of the derivatives which were formed by (C₅H₅)Co(C₂B₄H₆) and CHCHC₆H₄NO₂, CHCHC₆H₄NH₂. The results show: when H atom of (C₅H₅)Co(C₂B₄H₆) is substituted by CHCHC₆H₄NO₂, the β_tot values of isomers are all slightly smaller than that of ferrocene (Fc) derivative (FcCHCHC₆H₄NO₂). However, when H atom of (C₅H₅)Co(C₂B₄H₆) is substituted by CHCHC₆H₄NH₂, the β_tot values of isomers are close to that of ferrocene (Fc) derivative (FcCHCHC₆H₄NH₂). It indicates that (C₅H₅)Co(C₂B₄H₆) can be either a donator or an acceptor.     

A phosphoryl to spiro-bicyclophosphorane transformation via β-amidic proton elimination in phosphorylated hydrazides

The reaction between phosphoryl-containing reagents and hydrazides has been studied. The tetrahedral phosphoryl structure is transformed into a spiro-bicyclophosphorane system with trigonal bipyramidal geometry by the elimination of a β-amidic proton in the reaction between a hydrazide and phosphoryl reagents with at least two leaving groups (Cl) bound to the phosphorus atom, such as POCl₃ or PhPOCl₂. In the spiro-bicyclophosphorane structure, the CN imine bond is formed upon β-amidic proton elimination, leading to the conversion of the CO into a C-O bond and the formation of a P-O bond. All of these structural rearrangements are supported by X-ray crystallography data, and NMR and IR experiments.     

Theoretical calculations of the substituent effect on molecular properties of the RCN⋯HF hydrogen-bonded complexes with R = NH2, CH3O,CH3, OH,SH, H,Cl, F,CF3, CN and NO2

DFT calculations with B3LYP and PBE1PBE functionals and 6–311++G(d,p) basis set have been performed in order to obtain molecular geometries, binding energies and vibrational properties of the RCN?HF H-bonded complexes with R = NH₂, CH₃O, CH₃, OH, SH, H, Cl, F, CF₃, CN and NO₂. As expected, it has been verified as a red-shift of the HF stretching frequency (ν_HF), in conformity with the elongation of the bond after complexation. On the other hand, the CN stretching frequency (ν_CN) is blue-shifted and corresponds to a shortening of the bond. The binding energies (ΔE_c), including BSSE and ZPVE corrections, show a linear correlation with several structural, electronic and vibrational properties. In particular, an important linear dependence between the binding energy and the calculated dipole moment of the free RCN molecule (μ_RCN) has been found. This result suggests that μ_RCN can be a useful quantity in order to predict the ability of this fragment to form a hydrogen-bond. The IR intensities of stretching and bending modes of complexed HF acid fragment are adequately interpreted through the atomic polar tensor of the hydrogen atom in HF using the modified CCFO model for infrared intensities. The new vibrational modes arising from complexation show several interesting features.     

Functionalized fluoroalkyl and alkenyl silanes: Preparations, reactions, and synthetic applications

Preparations, reactions, and synthetic applications of functionalized fluoroalkyl and alkenyl silanes have been summarized. This review focuses mainly on the chemistries of (1) 1-substituted difluoromethylsilanes (XCF₂SiR₃), (2) 1-substituted 2,2-difluorovinylsilanes (CF₂CXSiR₃), (3) trifluoroisopropenyl, trifluoroacetimidoyl, and trifluoroacetyl silanes [CF₃C(SiR₃)X, XCH₂, NAr, O] and (4) other fluorinated alicyclic silanes.