Microwave-promoted Suzuki-Miyaura coupling reactions in a cycloalkane-based thermomorphic biphasic system

Microwave-promoted Suzuki-Miyaura coupling reaction of aryl halides attached to a cycloalkane-soluble platform was accomplished in a cycloalkane-based thermomorphic biphasic system. Following irradiation and subsequent cooling, the monophasic reaction mixture immediately formed a biphasic solution to allow facile workup and separation of the product.     

Solution-phase oligosaccharide synthesis in a cycloalkane-based thermomorphic system

The cycloalkane-based thermomorphic (CBT) system is a convenient and practical method for oligosaccharide synthesis, and hydrophobically modified oligosaccharides have a remarkable affinity for CBT solutions composed of methylcyclohexane and propionitrile.     

An oxidative carbon-carbon bond formation system in cycloalkane-based thermomorphic multiphase solution

A selective anodic oxidation system in which a carbocation intermediate is generated exclusively by use of a temperature-controlled multiphase solution to separate the different stages of the reaction from each other and from the products is described. The formation of a thermomorphic middle layer in an electrolytic solution composed of c-Hex and LPC/MeNO2 results in enhanced interaction between aliphatic alkenes and polar unstable cation.     

Phthalocyanine-peptide conjugates via palladium-catalyzed cross-coupling reactions

Phthalocyanines (Pc) were conjugated with peptide moieties to improve their target selectivity for potential use as fluorescence and/or positron emission tomography (PET) probes in medical imaging. Three synthetic methods based on palladium-catalyzed cross-coupling reactions (Sonogashira, Buchwald-Hartwig, and Suzuki-Miyaura) were investigated. Using these methods, a series of peptides monofunctionalized with Pc at the N/C-terminal position or on a phenylalanine side chain was obtained in good yields and characterized.     

C,C-diacetylenic phosphaalkenes in palladium-catalyzed cross-coupling reactions

The reactivity of bis-TMS-substituted C,C-diacetylenic phosphaalkene (A(2)PA) 1 in Sonogashira-Hagihara cross-coupling reactions has been examined. The selective and successive deprotection of the two silyl groups in 1 is enabled by the steric bulk of the Mes* group which renders the acetylene trans to Mes* more reactive and thereby facilitates selective and consecutive couplings with iodoarenes. In situ transformation of the TMS-protected acetylenes into Cu(i)acetylides is the key step in the synthetic sequence and enables the preparation of the first dimeric A(2)PA linked by a phenylene spacer. cis-trans Isomerization across the P[double bond, length as m-dash]C bond is triggered by a tertiary amine and exclusively observed in the case of nitrophenyl-substituted A(2)PAs. The introduced aryl groups are integral parts of the entire π-system as evidenced by spectroscopic and electrochemical studies.     

Efficient imidazolium salts for palladium-catalyzed Mizoroki-Heck and Suzuki-Miyaura cross-coupling reactions

The system, Pd(OAc)2/imidazolium salts (L2), was found as an efficient catalyst in the Heck coupling reaction of olefins with aryl halides and Suzuki reactions of various aryl halides with aryl boronic acids under aerobic condition. This catalytic system demonstrates great tolerance to a wide range of groups on all substrates of aryl halides, alkenes and aryl boronic acids.     

Triazole-based monophosphine ligands for palladium-catalyzed cross-coupling reactions of aryl chlorides

A variety of triazole-based monophosphines (ClickPhos) have been prepared via efficient 1,3-dipolar cycloaddition of readily available azides and acetylenes. Their palladium complexes provided excellent yields in the amination reactions and Suzuki-Miyaura coupling reactions of unactivated aryl chlorides. Ligand 7i, which has a 2,6-dimethoxybenzene moiety, provided good results in Suzuki-Miyaura reaction to form hindered biaryls. A CAChe model for the Pd/7i complex shows that the likelihood of a Pd-arene interaction might be a rationale for its high catalytic reactivity.     

Preparation of polymer-supported phosphine from ferrocene for palladium-catalyzed Suzuki-Miyaura cross-coupling reactions

Polymer-supported phosphine ligand 3b derived from ferrocene was prepared,and applied in palladium-catalyzed Suzuki- Miyaura reactions.A range of aryl bromides can couple with phenylboronic acid to obtain corresponding biaryls in excellent yields. The recycling of the polymer-bound catalyst was tested without adding palladium.     

Addressing challenges in palladium-catalyzed cross-coupling reactions through ligand design

The development of palladium-catalyzed cross-coupling reactions has revolutionized the synthesis of organic molecules on both bench-top and industrial scales. While significant research effort has been directed toward evaluating how modifying various reaction parameters can influence the outcome of a given cross-coupling reaction, the design and implementation of novel ancillary ligand frameworks has played a particularly important role in advancing the state-of-the-art. This Review seeks to highlight notable examples from the recent chemical literature, in which newly developed ancillary ligands have enabled more challenging substrate transformations to be addressed with greater selectivity and/or under increasingly mild conditions. Throughout, the importance and subtlety of ligand effects in palladium-catalyzed cross-coupling reactions are described, in an effort to inspire further development and understanding within the field of ancillary ligand design.     

Synthesis of C-15 vindoline analogues by palladium-catalyzed cross-coupling reactions

Described are general protocols for the rapid construction of various C-15-substituted analogues of vindoline using palladium-catalyzed cross-coupling reactions. The required bromo- and iodovindolines were prepared in high yield by the reaction of vindoline with N-bromosuccinimide or N-iodosuccinimide, respectively. The study not only led to the preparation of a number of structurally novel vindoline analogues but also opens the door to new strategies for the synthesis of vinblastine, vincristine, and related anticancer agents. Also described is the conversion of ent-tabersonine to ent-vindoline.     

Vinyldimethylphenylsilanes as safety catch silanols in fluoride-free palladium-catalyzed cross-coupling reactions

A series of five structurally diverse vinyldimethylphenylsilanes have been shown to undergo a fluoride-free one-pot palladium-catalyzed cross-coupling reaction with phenyl iodide to give ipso coupled products in 62-86% yield. The limitations of this present protocol lie in the activation of Si-Ph vs protodesilylation by KOTMS/18-C-6, which seems sensitive to the sterics of cis substituents, but not geminal substituents.     

Six- and eightfold palladium-catalyzed cross-coupling reactions of hexa- and octabromoarenes

Palladium-catalyzed sixfold coupling of hexabromobenzene (20) with a variety of alkenylboronates and alkenylstannanes provided hexaalkenylbenzenes 1 in up to 73 % and 16 to 41 % yields, respectively. In some cases pentaalkenylbenzenes 21 were isolated as the main products (up to 75 %). Some functionally substituted hexaalkenylbenzene derivatives containing oxygen or sulfur atoms in each of their six arms have also been prepared (16 to 24 % yield). The sixfold coupling of the less sterically encumbered 2,3,6,7,10,11-hexabromotriphenylene (24) gave the desired hexakis(3,3-dimethyl-1-butenyl)triphenylene (25) in 93 % yield. The first successful cross-coupling reaction of octabromonaphthalene (26) gave octakis-(3,3-dimethyl-1-butenyl)naphthalene (27) in 21 % yield. Crystal structure analyses disclose that, depending on the nature of the substituents, the six arms are positioned either all on the same side of the central benzene ring as in 1 a and 1 i, making them nicely cup-shaped molecules, or alternatingly above and below the central plane as in 1 h and 23. In 27, the four arms at C-1,4,6,7 are down, while the others are up, or vice versa. Upon catalytic hydrogenation, 1 a yielded 89 % of hexakis(tert-butylethyl)benzene (23). Some efficient accesses to alkynes with sterically demanding substituents are also described. Elimination of phosphoric acid from the enol phosphate derived from the corresponding methyl ketones gave 1-ethynyladamantane (3 b, 62 % yield), 1-ethynyl-1-methylcyclohexane (3 c, 85 %) and 3,3-dimethylpentyne (3 e, 65 %). 1-(Trimethylsilyl)ethynylcyclopropane (7) was used to prepare 1-ethynyl-1-methylcyclopropane (3 d) (two steps, 64 % overall yield). The functionally substituted alkynes 3 f-h were synthesized in multistep sequences starting from the propargyl chloride 11, which was prepared in high yields from the dimethylpropargyl alcohol 10 (94 %). The alkenylstannanes 19 were prepared by hydrostannation of the corresponding alkynes in moderate to high yields (42-97 %), and the alkenylboronates 2 and 4 by hydroboration with catecholborane (27-96 % yield) or pinacolborane (26-69 % yield).     

Ligand-supported palladium-catalyzed cross-coupling reactions of (hetero) aryl chlorides

The introduction of electron rich and sterically hindered ligands has made otherwise inert aryl chlorides and hetero aryl chlorides viable coupling partners in palladium-catalyzed Suzuki-Miyaura, Sonogashira, Stille and other types of cross-coupling reactions. This review gives highlights of cross-coupling of aryl chlorides employing in situ generated palladium catalytic systems.     

Regioselective lithium-halogen exchange and palladium-catalyzed cross-coupling reactions of 2,4-dihaloquinolines

Lithium-halogen exchange of 2,4-dibromoquinolines proceeds regioselectively at C-4 and affords 4-substituted quinolines on quenching with electrophiles. Palladium-catalyzed cross-coupling reactions of 2-bromo-4-iodoquinoline provide 4-substituted 2-bromoquinoline derivatives.     

Functionalization of sulfophthalocyanines in aqueous medium by palladium-catalyzed cross-coupling reactions

A series of mono-functionalized trisulfonated phthalocyanines were prepared in aqueous medium under palladium-catalyzed cross-coupling reaction conditions (Sonogashira, Heck and Suzuki) using water-soluble mono-iodo trisufophthalocyanines as precursors.     

A new ketone synthesis by palladium-catalyzed cross-coupling reactions of esters with organoboron compounds

[reaction: see text] The palladium-catalyzed coupling reaction of 2-pyridyl esters with organoboron compounds is described. The reaction is compatible with various functional groups and proceeds under mild reaction conditions. The coordination of the nitrogen atom to Pd is a key step for efficient reaction.     

Tosylhydrazones: new uses for classic reagents in palladium-catalyzed cross-coupling and metal-free reactions

Tosylhydrazones are useful synthetic intermediates that have been used in organic chemistry for almost 60 years. The recent discovery of a palladium-catalyzed cross-coupling reaction involving a tosylhydrazone coupling partner has triggered renewed interest in these reagents. This reaction shows nearly universal generality with regard to the hydrazone and can be employed for the preparation of polysubstituted alkenes. In the course of this research, novel metal-free C-C and C-O bond-forming reactions have been discovered. Since tosylhydrazones are readily prepared from carbonyl compounds, these transformations offer new synthetic opportunities for the unconventional modification of carbonyl compounds. This Minireview discusses all of these new reactions of a classic reagent.     

Highly selective palladium-catalyzed aminocarbonylation and cross-coupling reactions on a cavitand scaffold

Palladium-catalyzed aminocarbonylation and cross-coupling reactions (Suzuki-, Sonogashira-, Stille-coupling) served as highly efficient synthetic tools for the synthesis of novel, functionalized deepened cavitands. Unexpectedly high chemoselectivities towards tetrafunctionalized cavitands have been observed for all of these reactions even using coupling partners much below the stoichiometric amount. No significant formation of either the mono-, di- or trifunctionalized products was observed.     

Versatile synthesis of meso-aryloxy- and alkoxy-substituted porphyrins via palladium-catalyzed C-O cross-coupling reactions

[reaction: see text] meso-Aryloxy- and alkoxy-substituted porphyrins were conveniently synthesized by direct reactions of meso-halogenated porphyrins with alcohols via palladium-catalyzed C-O cross-coupling reactions. Using a combination of palladium precursor Pd(OAc)(2) or Pd(2)(dba)(3) and phosphine ligand DPEphos or Xantphos allowed both 5-bromo-10,20-diarylporphyrin and 5,15-dibromo-10,20-diarylporphyrin, as well as their zinc complexes, to be effectively coupled with a variety of alcohols to give the corresponding mono- and bis-substituted meso-aryloxy/alkoxyporphyrins in moderate to high yields under mild conditions.