Effect of chemical structure and crystallinity on sorption,diffusion and chemical stability of polyurethaneacetals

The diffusion of water in non-isocyanate polyurethaneacetals (PUA) of various kinds and compositions has been studied. The direct relationship between the composition of polymers, their degree of crystallinity, morphology and diffusional characteristics has been demonstrated. It has been shown that by changing the polymer composition one can obtain hydrated polymer systems of every type, hydrophobic, hydrophilic and moderately hydrophilic. The kinetics of hydrolytic degradation of PUA in HCl solutions (pH = 0·1) between 20 and 75°C has been investigated. Hydrolysis of acetal bonds has been found to occur in the amorphous phase of a polymer sample, which is mostly formed by the fragments of urethane glycol.The influence of morphology on PUA diffusional characteristics and their stability to hydrolysis has been determined.It has been shown that the physico-chemical properties of PUA can be regulated without the introduction of new compounds.     

Ionization probability of the hydrogen atom suddenly released from confinement

The problem of the stability of a confined atom when it is extracted from the confining cavity has been investigated, modeled by a spherical hard wall potential. The ionization probability when the atom is released from confinement has been obtained. The dependence of the ionization probability on the confinement radius and on the quantum numbers of the initial confined state has been studied. The probability density function of the ionization energy of the ejected electron has been obtained for the different cases considered. The oscillatory structure of this distribution function, with a principal maximum located in the neighborhood of the energy of the initial state and minima very close to zero has been elucidated. The sudden approximation has been applied and the analytic continuation method has been used to calculate the different stationary states.     

Enantiorecognition of profens by capillary electrophoresis using a novel chiral selector eremomycin

The evaluation of a macrocyclic glycopeptide antibiotic, eremomycin, as a chiral selector in capillary electrophoresis (CE) has been performed. The stability of eremomycin in solution and capillary electrolyte, as well as its optical and electrophoretic properties have been discussed. The effect of experimental parameters influencing the enantioseparation of several profens has been studied. Excellent enantioseparation of profens has been achieved and migration order has been validated. Comparison of enantioseparations of profens in CE by using eremomycin-mediated electrolytes and in HPLC with eremomycin immobilized on silica has revealed similar trends for both methods.     

Polyelectrolyte Configuration of Low Molecular Weight Sodium Amylose Xanthate in Aqueous and Salt Solutions

The polyelectrolyte chain configuration of low molecular weight sodium amylose xanthate (NaAX) in aqueous and salt solutions has been studied by viscometry and light scattering. The viscometric results in aqueous solution have been found to be in accordance with the Fuoss's modified equation. The intrinsic viscosities of NaAX in salt solutions from 0.00125 to 0.25 M NaCl have been determined and the expansion factor a at each ionic strength has been determined. The dependence of a on ionic strength has been studied according to the theories of Hermans and Overbeek, Flory, etc. But though qualitative agreement between experimental and theoretical results has been found, quantitative agreement was far from expectations. The frictional coefficient per monomer unit | has been calculated from the relationship of Kirkwood and Riseman. The NaAX macromolecule has been found to have the polydispersed random coil chain configuration in 0.25 M NaCl. Some macromolecular configurational parameters such as effective bond length b, Kuhn-Kuhn equivalent chain length A_m, and steric factor α has been determined.     

Infra-red and electronic absorption spectra of 2-bromopyrimidine

The electronic absorption spectrum of 2-bromopyrimidine in the u.v. region has been recorded in vapour phase and in solution phase in different solvents. Only one system has been observed in vapour phase and it has been identified as π* ← n transition. In solution phase two systems have been identified. The system on the longer wavelength side has been identified as corresponding to the one observed in vapour phase while the other one has been assigned to a π* ← π transition. The infrared spectrum of this molecule has also been recorded and analysed. Help of these i.r. data has been taken to analyse the u.v. spectrum of 2-bromopyrimidine, considering the molecule as belonging to C_2υ point group.     

Interaction between polyelectrolyte gels and surfactants of opposite charge

Investigations dealing with fundamental aspects of the interaction between covalently cross-linked polyelectrolyte gels and oppositely charged surfactants are reviewed. For reference, a brief summary of results from recent studies of associative phase separation in linear polyelectrolyte/surfactant mixtures is also included. It is found that great progress has been made in several sub-areas since the first reports appeared in the early 1990's. The frequently observed surfactant-induced volume transition has been studied in detail. Its relation to associative phase separation in solutions and the important role of polyion-mediated micelle–micelle attractions have been clarified. Phase separation in gels, in particular core/shell structures, has been studied in great detail. The importance of network mediated elastic forces between two phases coexisting in the same gel has been demonstrated and some of their consequences have been clarified. Hydrophobic interactions between polyion and micelle have been found to have strong effects on both binding and swelling isotherms. The effect of salt, which has been found to sometimes disfavor, sometimes promote surfactant binding, is quite well understood. The microstructure of gels in the collapsed state has been studied in great detail and is often found to be highly ordered, resembling liquid crystalline phases common to surfactant/water systems. The kinetics of surfactant binding and the associated volume change has been investigated to some extent. Progress has been made for gels displaying phase separation during the volume transition.     

Electron microtomography: A new method for studying the spatial structure of catalysts

The spatial arrangement of active component (Pt) particles on the surface of a support (Sibunit globule) has been studied by bright-field electron tomography. A tomographic attachment for a standard specimen holder and tomographic grids have been designed. The tomographic procedure has been refined, and adequate tilt series alignment and tomographic reconstruction algorithms have been chosen. The 3D distribution of the active component in the catalyst grain has been studied: particles hidden in micropores have been directly observed, and the size of the pores connecting internal cavities with the exterior has been estimated.     

The influence of the concentration and size of silver nanoparticles on the conductivity of ring-shaped deposits resulting from evaporation of colloidal solution droplets

The conductivity of ring-shaped deposits formed at the periphery of evaporating droplets of silver nanoparticle colloidal solutions has been studied. The dependence of the resistance of the ring-shaped deposits on nanoparticle size has been shown to exhibit a percolation transition. The specific conductivity of the deposits has been estimated in relation to their geometric shapes. The conductivity has been established to nonmonotonically depend on nanoparticle sizes. It has been noted that, in rather strong fields, the conductivity of the composite layers dramatically increases after some induction period. The X-ray spectra of silver have been revealed to alter for samples the conductivity of which has increased under the action of an external electric field.     

A fluorimetric and circular dichroism study of hemoglobin--effect of pH and anionic amphiphiles

In this work, bovine hemoglobin (Hb) has been studied mainly by the fluorescence method. pH has been found to exert a profound effect on Hb structure. This has been confirmed by fluorescence and circular dichroism (CD) studies. The pH-induced change in quaternary structure of Hb indirectly affects its secondary structure. This in turn affects ligand binding to Hb at various pH. The binding of two amphiphiles, a bile salt and a surfactant, have been investigated. The pH-induced structural modification of Hb has been confirmed by studies with the well-known denaturant urea and the polarity probe ANS, which has been used as an extrinsic fluorophore.     

Selective Potentiometric Measurement of Physiologically Significant Thiols

The reaction of benzoquinone with reduced thiol species has been investigated using potentiometric techniques. The specificity of this reaction for thiol functionality has been briefly assessed and the nature of the electrode response has been elucidated. The system has been characterized in terms of selectivity, sensitivity and the efficacy of using the system for the quantification of thiol containing pharmaceuticals has been demonstrated. The simplicity of the detection methodology is shown to markedly contrast alternative thiol detection strategies. The transfer of the technology to a mass production format through the adoption of screen print electrode formats has been achieved and the efficacy of the approach demonstrated. Recovery experiments using captopril and penicillamine in tissue culture as a model analyte system were performed.     

Electrophoretic Mobility of a Polyelectrolyte Capsule

The electrophoretic motion of a polyelectrolyte capsule has been considered in a uniform electric field. The capsule carries a uniformly distributed charge and is permeable to ions of different natures. An electrolyte identical to a dispersion medium is located inside the capsule. The flow in the porous layer of the capsule has been described by the Brinkman equations taking into account the effect of electrostatic forces. The distribution of ions in the vicinity of the capsule has been determined, and its electrophoretic mobility has been found in a linear approximation. The mobility of the capsule has been studied as depending on its geometric characteristics, permeability, and charge density. In particular, a complex extremal character of variations in the mobility as depending on the solid phase fraction in the capsule has been revealed at different ratios between the thicknesses of the electrical double layer and the Brinkman filtration layer.     

Improvement of properties of silica‐filled styrene‐butadiene rubber composites through plasma surface modification of silica

The performance of plasma surface modified silica filler in styrene‐butadiene rubber (SBR) matrix has been analyzed. The conditions of plasma modification have been optimized by taking secant modulus as a standard parameter and the occurrence of the modification has been confirmed by surface area determination and Fourier transform infrared spectroscopy. The plasma‐modified surface of silica has been found to be composed of carbon–carbon double bonds and carbon–hydrogen bonds. Silane treatment also has been carried out on silica filler surface for a comparative assessment of its influence in the curing behavior and filler–rubber interaction. The cure reactions of all the rubber compounds have been found to be proceeded according to first‐order kinetics. A reduction in the cure reaction rate constant has been observed with the loading of unmodified and surface modified silica, emphasizing the cure deactivation of the matrix rubber by the silica filler. The filler dispersion, as revealed by scanning electron microscopy, has been found to be greatly improved by the plasma as well as silane treatment. The filler–rubber interaction has been found to be greatly improved by both surface treatments, but the best balance of mechanical properties has been observed with plasma surface modification only. Copyright © 2004 John Wiley & Sons, Ltd.     

Chelate formation of ammonium aurintricarboxy-late with bivalent copper : Physico-chemical investigation of the composition,structure and stability

The formation of a coloured chelate, having λmax at 540 mμ, between cupric ions and ammonium aurintricarboxylate has been reported. It has been concluded that only one complex having metal : reagent ratio of 1:2 is formed in solution. The method adopted for investigation has been the continuous variation method, using spectrophotometric and electrical conductance measurements. It has been observed that there is an increase in acidity on mixing the reactants, which shows that hydrogen ions are liberated as a result of chelation It has been suggested that chelation occurs between the phenolic oxygen and the adjacent carboxylic oxygen.A method has been presented for the calculation of formation constant from spectrophotometric data and the value of K in the case of the chelate investigated has been calculated to be 6.45.10⁸. The free energy of formation works out to be —14.6 kcal at 25°C.     

A mechanistic evaluation of the amperometric response of reduced thiols in quinone mediated systems

The specificity of the reaction of benzoquinone with reduced thiol species has been investigated and the nature of the amperometric electrode response elucidated. The analytical applicability of the methodology has been assessed and it has been shown that through appropriate selection of the redox properties of the indicating quinone, interference from other electroactive species can be minimised. A discrepancy in the reaction stoichiometry has however been found between the glutathione and cysteine quinone adducts and the implications in interpreting the resulting sensor response are rationalised. The adaptation of the approach to disposable, screen printed electrode assemblies has been investigated.     

Research of Fluorination Process of Rutile Concentrate

The brief review of industrial technologies of titanium-containing concentrates processing has been carried out. Drawbacks of the existing titanium manufacture schemes are shown and the necessity of the essentially new fluoride technologies development has been proved. The reactions proceeding during the fluorination of rutile concentrate with element fluoride are described in the given work. The thermodynamic research of the process has been carried using ASTRA software. Dependence of mass concentration change of titanium tetrafluoride has been investigated in products of reaction on the temperature of the process, and the choice of optimum excess of fluoride has been proved.     

Synthesis and studies of structure and biological properties of D-homoanalogs of steroid estrogens

In order to estimate the potential of steroid estrogens modification, three D-homoanalogs of estrogens have been prepared; their structures and biological properties have been studied. The expansion of D-ring in such compounds has lead to strong decrease if the uterotropic action, however, the unfavorable hypertriglyceridemic effect has been retained. The latter has been eliminated by combined action of the studied steroids and ursolic acid; therewith the hypocholesterolemic activity has been retained.     

Vibrational and electronic absorption spectra of 4-chloro 2-methyl, 4-chloro 3-methyl and 6-chloro 3-methyl phenols

The infrared spectra of 4-Cl 2-Me, 4-Cl 3-Me and 6-Cl 3-Me phenols have been recorded. The vibrational spectrum has been analysed assuming that the molecules belong toC _s point group and a tentative assignment of the observed frequencies to various modes of vibration has been proposed. The near ultraviolet absorption spectrum of these compounds has also been recorded. Assuming the transition to be electronically allowed the strongest band on the longer wavelength side has been assigned as the (0, 0) band in each case. The spectrum has been analysed in terms of several excited state frequencies which have been correlated with the ground state frequencies observed in the infrared spectrum.     

C~6~0^3^-的Jahn-Teller变形、电子结构和光谱性质的理论研究

本文用INDO系列方法对C~6~0^3^-进行了几何构型优化, 得到D~2~h构型, 表明C~6~0^3^-确实发生了Jahn-Teller变形, 导致单键变短, 双键变长, 其额外负电荷和单电子主要分布在赤道附近。以此构型为基础, 计算其电子吸收光谱, 与实验值基本吻合, 在对光谱进行理论指认的同时, 讨论了光谱红移的原因。     

Electrochemical behaviour of triphenylgermanium bromide

The electrochemical behaviour of triphenylgermanium bromide has been thoroughly investigated using various electrochemical techniques including polarography, cyclic voltammetry and controlled potential coulometry. It has been found that in non-aqueous solvents triphenylgermanium bromide gives only one small drawn-out wave, while in aqueous-organic media two reduction waves are observed. The first wave has been ascribed to adsorption of the products of the reduction step II. The triphenylgermanium free radicals have been postulated to combine rapidly with protons in acidic media or to abstract hydrogen from water in alkaline media. The protonated species has been found to be reduced at potentials at which normal reduction of triphenylgermanium bromide takes place giving rise to a superimposed catalytic proton-discharge wave. A mechanism of reduction of triphneylgermanium bromide at the DME has been postulated and analytical methods for the determination of triphenylgermanium compounds at the formulation and trace analysis levels have been developed.     

Investigation of the role of the C-PCM solvent effect in reactivity indices

It has been shown recently, how the coupling between electronic degrees of freedom and vibrational modes is reflected in the properties of molecules. The necessary derivatives have been analyzed and their thermodynamic relations were demonstrated. This present work is focused on the analysis of a molecular system, under the influence of C-PCM induced solvent effect. The analysis is based on reactivity indices derived from DFT. The shift of frequency for diatomic molecules has been obtained. It has been identified as chemical force effect. The role of nuclear reactivity indices has been emphasized. This concept has been extended to obtain regional chemical potential values within C-PCM model for polyatomic molecules.