Computer-assisted multifactor optimization of selectivity in gas chromatography

Summary A computer-assisted method is presented for the simultaneous multifactor optimization (stationary phase loading, column temperature and carrier gas flow rate) of the analytical conditions for the optimum separation of multicomponent samples in gas chromatography. The optimization of the separation over the experimental region is based on a special polynomial from twelve preliminary experiments using the resolution as the selection criterion. Computer scanning technique was used for optimum selection in three dimensions. Excellent agreement was obtained between the predicted data and the experimental results.     

Increasing selectivity in comprehensive three-dimensional gas chromatography via an ionic liquid stationary phase column in one dimension

Recent advances in improving the selectivity and performance for a comprehensive, three-dimensional (3D) gas chromatograph (GC³) instrument are described. With GC³, two six-port diaphragm valves are utilized as the interfaces between three, in-series capillary columns housed in a standard GC instrument fitted with a high data acquisition rate flame ionization detector (FID). Modulation periods for sampling from one column to the next are set so that sufficient slices (i.e., modulations) are acquired by the subsequent dimension resulting in comprehensive data. We present GC³ instrumentation with significantly higher 3D peak capacity than previously reported. An average peak capacity production (i.e., per time) of 180 resolved peaks per minute was experimentally achieved for three representative analytes in a 3D diesel sample separation. This peak capacity production is about 4 times higher than our previous report. We also demonstrate the significant benefit of the added chemical selectivity of the three column GC³ instrument relative to a two column GC × GC instrument, in which one of the three columns is a triflate ionic liquid stationary phase column with a high selectivity for phosphonated compounds (i.e., di-methyl-methyl phosphonate, di-ethyl-methyl phosphonate and di-isopropyl-methyl phosphonate). Using all three separation dimensions, the 2D separation fingerprint of a diesel sample is simultaneously obtained along with selective information regarding the phosphonated compounds in the diesel samples in the additional dimension.     

Advanced simplex optimization of two-factor selectivity by high performance thin-layer chromatography

Summary A computer-assisted mixture design simplex method is presented for optimization of the separation of a mixture of five benzoic acid derivatives in reversephase HPTLC and twelve PTH-amino acids in normal phase HPTLC. A two-factor selectivity rectangle concept was used. The method is based on a special polynomial estimated from nine experimental runs, using the R_F difference as the selection criterion, with connection to a general simplex method for optimization using a microcomputer. Excellent agreement is obtained between predicted data and experimental results, and more than half the number of experiments required in the general simplex method can be omitted.     

A chiral porous organic cage for molecular recognition using gas chromatography

Molecular organic cages as shape-persistent organic molecules with permanent and accessible cavities have attracted a lot of interest because of their importance as host-guest systems. Herein, we report a chiral porous organic cage (POC) CC9 diluted with a polysiloxane OV-1701 to fabricate a CC9-coated capillary column, which was used for the high-resolution gas chromatographic separation of organic compounds, including positional isomers and racemates. On the CC9-coated capillary column, a large number of racemic compounds such as chiral alcohols, esters, ethers and epoxides can be resolved without derivatization. By comparing the chiral recognition ability of the CC9-coated column with the commercially available β-DEX 120 column and the POC CC3-R coated column recently reported by our group, the CC9-coated column offered good resolution during the separation of some racemates, that were not separated using the β-DEX 120 column or POC CC3-R coated column. Therefore, the CC9-coated column can be complementary to the β-DEX 120 column and CC3-R coated column. The results indicated that the CC9-coated column exhibited great potential for application in the separation of positional isomers and enantiomers with great selectivity, high resolution and good reproducibility.     

Evaporation of the liquid stationary phase in gas chromatography

Summary The theory of the evaporation of the liquid stationary phase is elaborated and experimentally verified. On the basis of this theory the role played by the losses in the amount of liquid phase present is quantitatively determined. General techniques are examined which minimize the losses; these techniques are based on saturating the incoming carrier gas with liquid phase vapours and raising the pressure of the carrier gas in the column, e.g. by connecting a capillary to the column outlet in order to offer resistance to the gas flow. The application of these techniques ensures stable performance of the gas chromatographic columns using a volatile liquid phase.     

气相色谱固定相研究新进展

发展高选择性固定相是实现气相色谱(GC)高效分离样品组分及其分析测定的关键。近年,材料科学的快速发展促进了新型色谱固定相的研究和应用。该文综述了近5年有关多孔材料、石墨烯及类似物、三聚茚类材料和蝶烯类材料等作为GC固定相的研究进展,并对GC固定相研究进行了总结和展望。     

A thermodynamic approach to understanding liquid crystal selectivity in gas chromatography

Summary The thermodynamics of four new liquid crystals were investigated in order to understand their selectivity as stationary phases in gas chromatography. In this case study, liquid crystals with a benzoyloxy azobenzene mesogenic core substituted with heptyloxy (C7) and/or dioxyethylene ether (DOE) groups, were used. The chromatographic separations of linalool and citronellal, and of xylene, tetraethylbenzene and cresol isomers, which were achieved with the liquid crystal stationary phases, have been related to the dissolution thermodynamics of the solutes. The results gave us an insight into the mechanism of the molecular recognition involved in the separation processes.     

Palladium(II) chelate of tetradentate Schiff base as mixed stationary phase for gas chromatography

Bis(acetylacetone)ethylenediiminepalladium(II) (PdAA2en) was examined as a mixed stationary phase with OV-1 on Chromosorb G/NAW 60-80 mesh size for the GC separation of aromatic hydrocarbons, heteroaromatics, alcohols, aldehydes, ketones, esters, and nitro compounds. Forty-two compounds were examined and the GC results were compared with those obtained with 3% OV-1 on Chromosorb G/NAW 60-80 mesh size under similar operating conditions. Improved resolution, peak asymmetry, theoretical plate numbers, and Kovats indices were obtained on the mixed stationary phase of 3% OV-1 + 5% PdAA2en compared to 3% OV-1 column. The stability constant (Km), enthalpies (deltaH), entropies (deltaS), and Gibbs free energies (deltaG) of the GC elution on the column (2 m x 3 mm id) packed with 3% OV-1 + 5% PdAA2en on Chromosorb G/NAW 60-80 mesh size have been calculated. Donor-acceptor complexation in the gas phase is indicated by negative values of enthalpy (-deltaH) within 5.81 to 10.89 kcal/mol and Gibbs free energy (-deltaG) from 1.34 to 4.08 kcal/mol. The retention time transformations on both the phases were calculated and the ratios obtained from the stationary phases 3% OV-1 and 3% OV-1 + 5% PdAA2en were plotted on the x-axis and the y-axis, respectively, and the coefficients of determination for alkanes, aromatic and heteroaromatics, ketones, and alcohols were observed to lie within 0.5253 to 0.9742, indicative of some different kinds of interaction of the two stationary phases with the solutes.     

Selectivity optimization in green chromatography by gradient stationary phase optimized selectivity liquid chromatography

Stationary phase optimized selectivity liquid chromatography (SOSLC) is a promising technique to optimize the selectivity of a given separation by using a combination of different stationary phases. Previous work has shown that SOSLC offers excellent possibilities for method development, especially after the recent modification towards linear gradient SOSLC. The present work is aimed at developing and extending the SOSLC approach towards selectivity optimization and method development for green chromatography. Contrary to current LC practices, a green mobile phase (water/ethanol/formic acid) is hereby preselected and the composition of the stationary phase is optimized under a given gradient profile to obtain baseline resolution of all target solutes in the shortest possible analysis time. With the algorithm adapted to the high viscosity property of ethanol, the principle is illustrated with a fast, full baseline resolution for a randomly selected mixture composed of sulphonamides, xanthine alkaloids and steroids.     

Synergistic effect of resorcarene and cyclodextrin mixed stationary phase in gas chromatography

Summary A new resorcarene derivatives, ethylhexylresorcarene, was synthesized and used as stationary phase in opentubular (capillary) columns. It was combined with heptakis(2,6-di-O-pentyl-3-O-trifluoroacetyl)-β-CD and coated on fused-silica capillary tubes. By studying the chromatographic properties of the mixed stationary phase and its selectivity for different isomers, as well as comparing with the resorcarene and the CD used as individual stationary phases, a synergistic effect was observed on the mixed stationary phase.     

Computer comparisons of variables in capillary gas chromatography

A series of computer-constructed van Deemter curves that permits evaluation of a number of variables in capillary gas chromatography is presented. The graphs permit the comparison of inter-related parameters, including the choice of carrier gas (hydrogen vs helium vs nitrogen), column length (10-100 m), column diameter (0.20, 0.25, 0.32, 0.4 mm), solute partition ratios (0-10), and liquid phase film thickness (0.1, 0.25, 0.5, 1.0 μm). The curves are evaluated, both in terms of the relative magnitude of the optimum average linear carrier gas velocity, and in terms of the significance of the sharpness of the curve.     

A new type of capillary column for gas chromatography

A new type of capillary column for gas chromatography was proposed. A sorbent layer (for example, stationary liquid phase) is supported on the internal capillary surface, and the internal (interstitial) volume is packed with nonporous large particles of a sorbent (particle diameter is 0.1—0.6 of the capillary internal diameter). The external surface of the particles can also be coated with the sorbent layer (for example, stationary liquid phase). The specific separation efficiency (number of separation) on the new type column is by 1.6—2.3 times higher than that of the initial classical capillary column.     

Dicyanobiphenyl polysioloxane stationary phases for capillary column gas chromatography

Summary The chromatographic performance of newly developed dicyanobiphenyl polysiloxane stationary phases were evaluated and compared with the performance of other polar stationary phases, including the previously reported monocyanobiphenyl polysiloxanes. Due to the unique combination of polarizable biphenyl and polar cyano functionalities in the side chains of the flexible polysiloxane backbone, and by virtue of their mild liquid crystalline properties, the new stationary phases provide excellent resolution of a wide variety of analytes, both polar and nonpolar, in both GC and SFC. They can be easily coated and cross-linked in open tubular columns, and the resultant columns demonstrate excellent efficiency and performance at temperatures up to 280–300°C. The new stationary phases exhibit enhanced selectivities for various types of isomeric compounds.     

Autocrosslinkable methyl-2-phenylethylpolysiloxane stationary phase for capillary column gas chromatography

Methyl-2-phenylethylpolysiloxane polymers have been synthesized for comparison with methylphenylpolysiloxane stationary phases for gas chromatography. The 50% 2-phenylethyl polysiloxane was found to be autocrosslinkable at 260°C without addition of free redical initiator. Although the selectivity of this phase appears to be similar to the 50% phenyl polysiloxane, its thermal stability is not as high.     

Porous glassy carbon,a new columns packing material for gas chromatography and high-performance liquid chromatography

Summary A new carbon for liquid and gas chromatography, called porous glassy carbon (PGC) is described. The material is made using a porous template filled with carbonizable resin. After firing in an inert atmosphere the template is removed. PGC has been made with surface area ranging from 20 m²/g to 400 m²/g. It is of adequate strength for gas and high-performance liquid chromatography. In gas chromatography it is similar to the commerical graphitized thermal carbon black (GTCB) Carbopack B, but has somewhat less retention per unit surface area and is much more robust. It gives symmetrical peaks for hydrocarbons with k-values up to at least 100. In liquid chromatography it is similar to the GTCB's coated with pyrolytic carbon described by Guiochon. It behaves as a strong reversed phase adsorbent. Fairly good peak symmetry is maintained for k-values up to at least 10 but trace additives to the eluent may be necessary to control peak asymmetry. PGC has considerable potential as a new packing material in both gas and liquid chromatography.Presented at the 14th International Symposium on Chromatography London, September, 1982     

Cyclodextrin dimer derivatives used as stationary phase for capillary gas chromatography

Summary Four cyclodetrin dimer derivatives were synthesized by linking two single cyclodextrin derivatives with difunctional spacer at the primary side of cyclodetrin. The separation properties of these cylodextrin dimer derivatives as CGC stationary phases were investigated and compared with those of the unbridged native cyclodextrin derivative. The results show that two recognition sites and one link spacer of these cyclodextrin dimer derivatives cooperate in separation and affect the separation of disubstituted benzene positional isomers.