微波消解-氢化物发生原子荧光法测定塑料原料及其制品中的砷、汞

采用微波消解进行样品前处理，以硫脲为预还原剂，用氢化物发生原子荧光法测定塑料原料及其制品中的砷、汞。测定砷和汞的线性范围均为0～8μg／L，砷、汞的检出限分别为0．005、0．076μg／L，测定结果的相对标准偏差分别为4.96％～7．38％、2．94％～7．20％(n=6)，回收率分别为92．0％～103．2％、92．0％～98.0％。     

铬天青S共振光散射法测定脱氧核糖核酸

介绍在阳离子表面活性剂十六烷基三甲基溴化铵(CTMAB)存在下阴离子染料铬天青S(CAS)共振光散射(RLS)法测定脱氧核糖核酸(DNA)的方法。在pH=5．27的六次甲基四铵一盐酸缓冲溶液中，研究了CAS—CT-MAB—yDNA体系的RLS光谱特征、影响因素和最佳反应条件。在最佳条件下，体系的RLS强度增加值△I与yDNA的浓度在50～800μg／L和1000～2000μg／L呈线性关系，其线性回归方程分别为△I=0．48c 2．56和△I=0．14c 17．86，相关系数分别为0．9997和0．9991，检出限为4．3ng／mL。该方法简便、快速，应用于合成样品中yDNA的测定，测定结果的相对标准偏差为2．93％～4．71％，回收率为97．8％～105．2％。     

氢化物发生-原子荧光光谱法同时测定水中砷和锑

建立在硝酸介质中用氢化物发生-原子荧光光谱法同时测定水中砷和锑的方法。优化了仪器工作条件、酸度、硼氢化钾及还原剂浓度。砷、锑的线性范围为0～10．0μg／L;检出限分别为0．02,0．01μg／L;测定结果的相对标准偏差分别为1．77％～3．72％,2．95％～4．87％（n=6）;加标回收率分别为98％106％,96％105％。该法操作简便,灵敏度高,快速,便于推广,适用于水中砷和锑的同时测定。     

氢化物-原子荧光法同时测定大米中的砷和硒

采用氢化物-原子荧光光谱法测定大米中的砷和硒。在0～10μg／L范围内,砷和硒的浓度与荧光强度呈线性关系,相关系数分别为0．9996和0．9998,加标回收率分别为96．2％～100．8％和98．1％～107．6％,砷、硒测定结果的相对标准偏差分别不大于6．8％,5．7％（n=6）。     

微波消解-火焰原子吸收法测定土壤中的钴

建立了微波消解一火焰原子吸收法测定土壤中钴的方法：用微波消解土壤、电热板加热驱酸的方法对土壤样品进行前处理,优化了微波消解条件。方法的加标回收率为93．0％～106．0％,检出限为3．0μg/g,测定结果的相对标准偏差为2．1％～4．9％（n=6）。     

火焰原子吸收法测定苹果汁中的钠

用浓硝酸及高氯酸消化苹果汁样品，以氯化钾作为电离缓冲剂，建立了测定苹果汁中钠的火焰原子吸收法。方法的线性范围为0～0．6μg／mL，线性回归方程为A=1．0182c 0．0462，相关系数r=0．9971，检出限为0.9μg／L。测定浓缩苹果汁、苹果原汁中钠的相对标准偏差分别为0．6％、1．3％，加标回收率分别为99.0％～lOl.3％、98．0％～103．2％。     

石墨消解–原子荧光法测定土壤中的汞和砷

采用石墨消解法对土壤样品进行预处理,用原子荧光光度法测定样品中汞和砷的含量。汞的质量浓度c在0.00~1.00μg/L范围内与荧光强度I线性相关,回归方程为I=849.47c–22.356,相关系数r2=0.999 9,检出限为0.001 8μg/g。砷的质量浓度在0.00~10.00μg/L范围内与荧光强度线性相关,回归方程为I=107.22c–28.994,相关系数r2=0.999 9,检出限为0.009 9μg/g。实际土壤样品5次平行测定汞和砷的相对标准偏差分别为6.2%~15.2%,0.8%~9.9%,用本法对黄土标准样品进行测定,测定结果在标准值允许范围内。     

微波王水消解不赶酸原子荧光光谱法测定土壤中的砷

采用微波消解土壤样品不赶酸的情况下利用原子荧光光谱法测定土壤中的砷.结果表明:微波王水消解土壤样品不赶酸情况下,砷的测定值均在国家标准物质ESS-1的推荐值范围内.砷的线性范围分别为0.0～50.0μg/L,相关系数为r=0.9995.按称取0.2 g样品,定容至50 mL,求出砷检出限为0.5 mg/kg.砷回收率为93.4%～100.9%之间,相对标准偏差(n=4)为0.39～4.56%.结果表明:微波王水消解不赶酸原子荧光光谱法测定土壤中的砷,灵敏度高,操作简便快速,结果准确可靠.     

氢化物发生-原子吸收法测定饮用水中的砷、硒

建立了测定饮用水中砷、硒的氢化物发生－原子吸收法，探讨了盐酸、硼氢化钠溶液的浓度以及样品还原处理对测定结果的影响，测定结果的相对标准偏差（n=7)小于3％，回收率为89．1％－110．7％，测定砷的线性范围为0－40ug/L(r=0.9990)，测定硒的线性范围为0－50ug/L(r=0.9990)，砷、硒的检出限分别为1．06，0．78ug/L。     

氢化物原子荧光光谱法测定虾中砷和汞

建立了氢化物原子荧光法同时测定虾中砷和汞的方法。研究了样品前处理及实验条件对测定砷、汞的原子荧光强度的影响，并探讨了共存离子对测定砷、汞的干扰和消除的方法。本方法具有操作简便、快速、灵敏度高等优点，砷和汞的检出限分别为0．026μg/L和0．020μg／L；相对标准偏差分别为1．7％～9．4％和1．2％～9．4％；回收率为98％～106％。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Copper catalyzed/mediated synthetic methodology for ebselen and related isoselenazolones

Scope of the copper catalyzed/mediated selenium-nitrogen coupling reaction has been studied for the synthesis of isoselenazolones. It is noticed that the 2-chloro, 2-bromo-, and 2-iodo-aryl amides substrates can be exploited in the selenium-nitrogen coupling reaction by employing 25-100 mol % of CuI/1,10-phenanthroline (L) and potassium carbonate as a base in DMF. Furthermore, electron rich 2-chloro-arylamides also underwent selenium-nitrogen coupling reaction to give biologically important selenium-nitrogen heterocycles. Also, copper-catalyzed selenium-nitrogen coupling reaction has been meticulously applied for the synthesis of diaryl diselenides having methoxy, amine, and amide functionality from respective aryl iodides in the presence of stoichiometric amount of succinimide as an external Se-N coupling partner.     

Knoevenagel condensation catalyzed by novel Nmm-based ionic liquids in water

A series of novel N-methyl morpholine (Nmm) based ionic liquids with 1,2-propanediol group were synthesized and used as catalysts for Knoevenagel condensation at room temperature in water. Under the effect of the catalyst, various aldehydes or aliphatic ketones could react with a wide range of activated methylene compounds well, including malononitrile, alkyl cyanoacetate, cyanoacetamide, β-diketone, barbituric acid, 2-arylacetonitrile and thiazolidinedione. Furthermore, most of the products could be separated just by filtrating and washing with water. Additionally, the catalyst is recyclable and applicable for the large-scale synthesis.     

Construction of polyheterocyclic spirotetrahydrothiophene derivatives via sulfa-Michael/aldol cascade reaction

A series of polyheterocyclic spirotetrahydrothiophene derivatives were obtained in moderate to excellent yields via a catalyst-free sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 under mild conditions. We also present the first asymmetric sulfa-Michael/aldol cascade reaction of chalcones 1 and commercially available 1,4-dithiane-2,5-diol 2 with moderate to good enantioselectivities catalyzed by readily available chiral phase-transfer catalysts (PTCs).     

Suzuki-Miyaura reactions of the soluble guanylate cyclase inhibitor NS2028: a non-product specific route to C-8 substituted analogues

Both soluble guanylate cyclase (sGC) inhibitors ODQ 1 and NS2028 2 are synthesized via improved protocols. In the former case treating 3,4-dihydroquinoxalin-2(1H)-one oxime 8, which can be prepared in two steps from 1,2-benzenediamine, with 1,1′-carbonyldiimidazole (CDI) gives the dihydro-ODQ 10 that in the presence of KMnO₄ oxidises to give ODQ 1 in an overall yield of 46% starting from 1,2-benzenediamine. In the latter case, the synthesis affords NS2028 2 from 2-amino-4-bromophenol 3 in three steps with an overall yield of 85% and avoids the need for chromatography. Furthermore, Suzuki-Miyaura reaction conditions are described that enable the preparation of 8-aryl and 8-heteroaryl derivatives of NS2028 directly from NS2028 2. Finally, demethylation of the 8-(methoxyphenyl) substituted analogues afforded the 8-(hydroxyphenyl) derivatives 40-42. All new products are fully characterised.