Thick transparent rutile TiO2 films crystallized in solution

We report a novel process for the preparation of dense, transparent TiO2 films of 2.5 mum thickness on a F-doped SnO2-covered glass substrate. The starting solution contained peroxotitanate complex ions, which are relatively stable under the experimental conditions, permitting the deposition of highly textured rutile nanocrystalline films. The nanocrystals exhibit specific orientations along the (101) and (002) crystalline planes. Kinetic studies suggest that the precipitation started from the formation of amorphous solids, followed by crystallization through a dissolution-recrystallization process. Although a minor phase of anatase was detected only for powders collected from solutions after film preparation, not for films, the transformation from amorphous to anatase was believed to occur before further transformation of anatase to rutile. The present method enables film synthesis on a surface with a large area, and therefore could be integrated into the processing of electroluminescent devices.     

Low Temperature Sol-Gel Preparation of Nanocrystalline TiO2 Thin Films

TiO₂ nanocrystalline thin films with varying degree of porosity have been prepared using a low temperature method. TiO₂ films of the anatase form have been obtained by using a polyethylene glycol (PEG) modified sol-gel method. Densification and crystallization of the films was found to result from the thermal treatment of the dip coated films in boiling water. The films have been characterized by Raman, XRD, FTIR, AFM and optical methods. Highly transparent films with transmission in excess of 85% and porosity as high as 58% are formed predominantly of anatase crystallites of dimensions of the order of 5 nm. Initial results on lithium intercalation into these films resulting in an efficient optical modulation in the visible and near infrared regions demonstrate a good potential of these films for electrochromic applications.     

Characterization of titanium dioxide nanoparticles using molecular dynamics simulations

Molecular dynamics simulations of titanium dioxide nanoparticles in the three commonly occurring phases (anatase, brookite, and rutile) are reported. The structural properties inferred by simulated X-ray diffraction patterns of the nanoparticles were investigated. The titanium-oxygen bond length as a function of size, phase, and temperature was determined and was found to be dependent on the coordination environment of the titanium and independent of phase and size. The equilibrium Ti-O bond length is 1.86 A for a four-coordinated titanium ion, 1.92 A for a five-coordinated titanium ion, and 1.94 A for an octahedral titanium ion. Smaller nanoparticles are characterized by a higher fraction of titanium ions that are four and five coordinated, due to the larger surface area-to-volume ratios. The surface energies for anatase, rutile, and brookite particles were reported. The surface energy of the nanoparticle increases and approaches a constant value as the particle gets bigger. The surface energies of small rutile particles are higher than that for anatase particles of a similar size, consistent with anatase being the more stable phase of nanocrystalline titanium dioxide.     

Block copolymer‐directed synthesis of porous anatase for lithium‐ion battery electrodes

A templating method is developed to produce porous nanocrystalline anatase materials for negative electrodes in lithium‐ion batteries (LIBs). Amphiphilic diblock copolymers are used to generate template films with phase‐separated internal structure. Subsequent swelling with acidified titanium(IV) bis(ammonium lactato) dihydroxide (TALH) solution yielded structured hybrid films. Upon heating, the formation of TiO₂ nanocrystals is induced, resulting in a three‐dimensional mesoporous structure directed by the bulk morphology of the polymer template. In comparison to commercial nanosized anatase, the structured anatase shows significant performance improvements in lithium‐ion coin cell batteries in terms of capacity, stability, and rate capability. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1890–1896     

Low-temperature preparation of nanocrystalline anatase films through a sol-gel route

Nanocrystalline anatase (TiO₂) films were prepared at very low temperature through a sol-gel route using titanium isopropoxide and hydrogen peroxide in ethanol. Crystallization occurred after film deposition at 35°C in an atmosphere saturated with water vapor. Both thin and thick films of nanocrystalline anatase were prepared. Observed particle size in crystallized films is approximately 20–40 nm as measured with AFM. No residual organic material was apparent through FTIR after crystallization occurred. Dynamic light scattering studies performed on this system indicate that particle size measured in solution is strongly dependent on the amount of agitation samples received prior to measurement.     

Influence of TiCl4 treatment on surface defect photoluminescence in pure and mixed-phase nanocrystalline TiO2

Room-temperature UV-excited photoluminescence spectra are reported for nanocrystalline films of anatase, rutile, and mixed-phase TiO2 (Degussa P25) before and after treatment with TiCl4 solution. The surface defect luminescence of anatase in the visible region is suppressed by TiCl4 treatment, indicating a decrease in surface traps. A similar anatase surface-defect emission is observed in the mixed-phase nanoparticles but is completely quenched following TiCl4 treatment and replaced by emission characteristic of rutile. Our results suggest that TiCl4 treatment of mixed-phase TiO2 may result in a surface layer of rutile and that radiative recombination of electron-hole pairs formed in the bulk anatase region of nanocrystallites occurs after electrons migrate to newly formed rutile surfaces.     

阳极氧化水解法制备TiO2纳米膜

TiO2在光电化学电池领域已成为比较重要的半导体材料，自从1972年，Fuishima和Honda首次把TiO2电极用于光电解水以来，人们已经使用多种方法，如化学气相沉积、TiO2粉的烧结、RF射频溅射、等离子体喷涂或用胶体TiO2涂膜等各种方法，来制备单晶（金红石），多晶（金红石、锐钛矿     

Photochemical reduction of oxygen adsorbed to nanocrystalline TiO(2) films: a transient absorption and oxygen scavenging study of different TiO(2) preparations

Transient absorption spectroscopy (TAS) has been used to study the interfacial electron-transfer reaction between photogenerated electrons in nanocrystalline titanium dioxide (TiO(2)) films and molecular oxygen. TiO(2) films from three different starting materials (TiO(2) anatase colloidal paste and commercial anatase/rutile powders Degussa TiO(2) P25 and VP TiO(2) P90) have been investigated in the presence of ethanol as a hole scavenger. Separate investigations on the photocatalytic oxygen consumption by the films have also been performed with an oxygen membrane polarographic detector. Results show that a correlation exists between the electron dynamics of oxygen consumption observed by TAS and the rate of oxygen consumption through the photocatalytic process. The highest activity and the fastest oxygen reduction dynamics were observed with films fabricated from anatase TiO(2) colloidal paste. The use of TAS as a tool for the prediction of the photocatalytic activities of the materials is discussed. TAS studies indicate that the rate of reduction of molecular oxygen is limited by interfacial electron-transfer kinetics rather than by the electron trapping/detrapping dynamics within the TiO(2) particles.     

Synthesis of thin dense titania films via an aqueous solution-gel method

Nanostructured titanium dioxide films have been reported to be used in many applications ranging from optics and solar energy devices to gas sensors. This work describes the synthesis of nanocrystalline titania films via an aqueous solution-gel method. The thin films are deposited by spin coating an aqueous citratoperoxo-Ti(IV)-precursor solution onto a silicon substrate. The influence of processing parameters like Ti⁴⁺ concentration and crystallization temperature on the phase formation, crystallite size and surface morphology of the films is studied by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and atomic force microscopy (AFM). Furthermore, the effect of successive layer deposition on the film thickness of the resulting films is studied by means of cross sectional SEM. SEM and TEM micrographs clearly show that, after optimization of the process parameters, thin, smooth, dense nanocrystalline films are synthesized in a reproducible manner. The films are composed of 15–20 nm grains. At higher crystallization temperatures (600, 650°C) also larger particles (40–70 nm) are present. XRD data reveal that a phase pure anatase film is formed at 450°C. Crystallization temperatures equal to or higher than 600 °C however give rise to the formation of both the anatase and rutile crystalline phases. The smoothness of the films is proved by their very low rms surface roughness (≤1.1 nm) measured by AFM.     

Characterization of nanocrystalline anatase TiO<Subscript>2</Subscript> thin films

Nanoporous thin films were deposited onto glass substrates by painting with a solution of nanocrystalline anatase TiO(2) particles (with a size of either 6 nm or 16 nm) suspended in an organic solvent. Upon drying in air for about 1 day, the films were tempered at 450 degrees C in air for 1 h. This procedure results in stoichiometric TiO(2) films with a thickness of several micro m and a milky whitish appearance. Scanning force microscopy of the surface revealed that the nanoparticles of the films agglomerated into structures with lateral dimensions of some 100 nm. Transmission electron microscopy was utilized to investigate the structural arrangement of the crystallites in the films. High-resolution electron diffraction and X-ray diffraction analyses demonstrated, furthermore, that the material consists exclusively of a single TiO(2) phase, namely anatase, and that the films do not exhibit any preferential texture. The elemental stoichiometry and the possible presence of impurities were monitored throughout the films by means of secondary-ion mass spectrometry depth profiling. Electrical measurements have been carried out as a function of both the sample temperature T and the ambient oxygen partial pressure p(O(2)). From these data the electrical conductivity sigma of the porous films was determined in dependence of those parameters.     

Preparation of large-pore mesoporous nanocrystalline TiO2 thin films with tailored pore diameters

A novel and facile synthesis route to large-pore mesoporous nanocrystalline anatase thin films with tunable pore diameters in narrow distribution of sizes ranging from 8.3 to 14 nm is reported, using triblock copolymer as the template and Ti(OBu(n))4 as the inorganic precursor. The obtained materials were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and nitrogen adsorption. A reasonable formation mechanism is also presented in this work.     

Study of Anatase to Rutile Phase Transition in Nanocrystalline Titania Films

Nanocrystalline titania films were prepared by a complexing agent-assisted sol-gel dip-coating process. The effect of acetylacetone, diethanolamine and polyethylene glycol on the structure of the heat-treated titania films was examined by Raman and FTIR spectroscopy and X-ray diffraction. The effect the complexing agents have on the anatase to rutile phase transition during the heat treatment process is studied. The understanding of this effect is expected to enhance our capacity to tailor the composition and morphology of films and thus their properties. The Raman and the infrared spectra of nanocrystalline titania films and the changes induced by the heat treatment were also investigated. We have also studied the size of the crystallites in TiO₂ films and its dependence on the type of complexing agent used.     

In situ spectroelectrochemical behaviour of nanocrystalline TiO_2 thin films electrode fabricated by pulsed laser deposition

Nanocrystalline titanium oxide thin films have been successfully deposited on ITO coated glass by pulsed laser ablation of metallic Ti target in O_3/O_2 ambient gases. The intercalation of Li ions in the anatase TiO_2 film electrode is examined by cyclic vohammetry. The electrochromic behaviour of TiO_2 electrode is investigated by in-situ visible transmittance measurement, and two absorption bands at 420 and 650 nm are observed. The absorption falling and rising in color changing with excellent revisibility is relative to the insertion and deintercalation processes of Li ion. These resuits suggest that nanocrystalline titanium oxide films fabricated by pulsed laser deposition exhibit excellent spectroelectrochemical property.     

ZnO纳米棒阵列在TiO2介孔薄膜上的生长及其表征

通过低温水热法成功地将ZnO纳米棒阵列定向生长在了介孔锐钛矿TiO2纳米晶薄膜上,并主要利用X射线衍射、场发射扫描电子显微镜和光致发光光谱等对其进行了表征。所制备的纳米棒具有六边形的端面,纳米棒的尺寸及端面边长分布范围窄,并且沿c轴方向(002)表现出了明显的择优化生长。此外,相比于玻璃基底或TiO2纳米颗粒薄膜,生长在介孔TiO2薄膜上的ZnO纳米棒阵列表现出了较好的取向生长,表明基底的表面结构和组成对ZnO纳米棒阵列的生长有显著的影响。根据基底有序的多孔结构,讨论了纳米棒阵列可能的生长机理。所得到的ZnO纳米棒阵列在室温下分别表现出了以370 nm为中心的强近紫外光和以530 nm为中心的弱绿光两条荧光谱带。     

Sol–gel synthesis of mesoporous WO3–TiO2 composite thin films for photochromic devices

Mesoporous WO₃–TiO₂ composite films were prepared by a sol gel based two stage dip coating method and subsequent annealing at 450, 500 and 600 °C. An organically modified silicate based templating strategy was adopted in order to obtain a mesoporous structure. The composite films were prepared on ITO coated glass substrates. The porosity, morphology, and microstructures of the resultant products were characterized by scanning electron microscopy, N₂ adsorption–desorption measurements, μ-Raman spectroscopy and X-ray diffraction. Calcination of the films at 450, and 500 °C resulted in mixed hexagonal (h) plus monoclinic phases, and pure monoclinic (m) phase of WO₃, respectively. The degree of crystallization of TiO₂ present in these composite films was not evident. The composite films annealed at 600 °C, however, consist of orthorhombic (o) WO₃ and anatase TiO₂. It was found that the o-WO₃ phase was stabilized by nanocrystalline anatase TiO₂. The thus obtained mesoporous WO₃–TiO₂ composite films were dye sensitized and applied for the construction of photochromic devices. The device constructed using dye sensitized WO₃–TiO₂ composite layer heat treated at 600 °C showed an optical modulation of 51 % in the NIR region, whereas the devices based on the composite layers heat treated at 450, and 500 °C showed only a moderate optical modulation of 24.9, and 38 %, respectively. This remarkable difference in the transmittance response is attributed to nanocrystalline anatase TiO₂ embedded in the orthorhombic WO₃ matrix of the WO₃–TiO₂ composite layer annealed at 600 °C.     

Effect of yttrium oxide on the formation of the phase composition and porous structure of titanium dioxide

The formation of the structure of TiO₂ (anatase) doped with 1–5 mol % Y₂O₃ is reported. The dopant changes the anatase structure from regular to nanocrystalline. The nanocruystalline structure consists of incoherently intergrown 5- to 7-nm anatase crystallites (500°C) separated by interblock boundaries accommodating yttrium ions. The formation of the nanocrystalline anatase structure stabilizes small anatase crystallites and raises the anatase-to-rutile phase transition temperature above 900°C. Owing to this structure, the developed specific surface area and fine porous texture of yttrium oxide-doped titanium dioxide survive up to higher temperatures than those of undoped titanium dioxide.     

Erratum to: Sol–gel synthesis of mesoporous WO3–TiO2 composite thin films for photochromic devices

Mesoporous WO₃–TiO₂ composite films were prepared by a sol gel based two stage dip coating method and subsequent annealing at 450, 500 and 600 °C. An organically modified silicate based templating strategy was adopted in order to obtain a mesoporous structure. The composite films were prepared on ITO coated glass substrates. The porosity, morphology, and microstructures of the resultant products were characterized by scanning electron microscopy, N₂ adsorption–desorption measurements, μ-Raman spectroscopy and X-ray diffraction. Calcination of the films at 450, and 500 °C resulted in mixed hexagonal (h) plus monoclinic phases, and pure monoclinic (m) phase of WO₃, respectively. The degree of crystallization of TiO₂ present in these composite films was not evident. The composite films annealed at 600 °C, however, consist of orthorhombic (o) WO₃ and anatase TiO₂. It was found that the o-WO₃ phase was stabilized by nanocrystalline anatase TiO₂. The thus obtained mesoporous WO₃–TiO₂ composite films were dye sensitized and applied for the construction of photochromic devices. The device constructed using dye sensitized WO₃–TiO₂ composite layer heat treated at 600 °C showed an optical modulation of 51 % in the NIR region, whereas the devices based on the composite layers heat treated at 450, and 500 °C showed only a moderate optical modulation of 24.9, and 38 %, respectively. This remarkable difference in the transmittance response is attributed to nanocrystalline anatase TiO₂ embedded in the orthorhombic WO₃ matrix of the WO₃–TiO₂ composite layer annealed at 600 °C.     

Hydrothermal synthesis of efficient TiO<Subscript>2</Subscript>-based photocatalysts

We carried out a thorough study of the micromorphology, physicochemical properties, and photocatalytic activity of nanocrystalline anatase powders formed during the hydrothermal treatment of titanyl sulfate solutions of various compositions. A new procedure is proposed for the hydrothermal synthesis of nanocrystalline anatase having specific surface areas of ∼50 m²/g and photocatalytic activities exceeding the activity of the commercially available Degussa P25 formulation.     

TiO2 nanotube, nanowire, and rhomboid-shaped particle thin films fixed on a titanium metal plate

Titanium dioxide thin films having various nanostructures could be formed by various treatments on sodium titanate nanotube thin films approximately 5 μm thick fixed on titanium metal plates. Using an aqueous solution with a lower hydrochloric acid concentration (0.01 mol/L) and a higher reaction temperature (90 °C) than those previously employed, we obtained a hydrogen titanate nanotube thin film fixed onto a titanium metal plate by H⁺ ion-exchange treatment of the sodium titanate nanotube thin film. Calcination of hydrogen titanate nanotube thin films yielded porous thin films consisting of anatase nanotubes, anatase nanowires, and anatase nanoparticles grown directly from the titanium metal plate. H⁺ ion-exchange treatment of sodium titanate nanotube thin films at 140 °C resulted in porous thin films consisting of rhomboid-shaped anatase nanoparticles.     

Voltage enhancement in dye-sensitized solar cell using (001)-oriented anatase TiO2 nanosheets

A nanocrystalline TiO₂ (anatase) nanosheet exposing mainly the (001) crystal faces was tested as photoanode material in dye-sensitized solar cells. The nanosheets were prepared by hydrothermal growth in HF medium. Good-quality thin films were deposited on F-doped SnO₂ support from the TiO₂ suspension in ethanolic or aqueous media. The anatase (001) face adsorbs a smaller amount of the used dye sensitizer (C101) per unit area than the (101) face which was tested as a reference. The corresponding solar cell with sensitized (001)-nanosheet photoanode exhibits a larger open-circuit voltage than the reference cell with (101)-terminated anatase nanocrystals. The voltage enhancement is attributed to the negative shift of flatband potential for the (001) face. This conclusion rationalizes earlier works on similar systems, and it indicates that careful control of experimental conditions is needed to extract the effect of band energetic on the current/voltage characteristics of dye-sensitized solar cell.