Oxygen isotope effect of superconducting (Nd1−xCex)2CuO4−δ system

The effect of oxygen isotope substitution on the transition temperature T_c of a superconducting (Nd_1−xCe_x)₂CuO_4−δ system was studied, where the special synthetic method was taken to minimize ambiguous factors on the oxygen concentration and to guarantee the complete substitution of ¹⁶O by ¹⁸O. The isotope exponent in the relationship of T_c∝1/M was estimated to be less than 0.15 by magnetic susceptibility measurements.     

The ν1 and 2ν1 bands of DNSO

The infrared spectrum of DNSO has been recorded in the region of the N-D stretching fundamental vibration and of the first overtone. The results of the analysis are the following (in cm⁻¹):

Full-size image

     

Line Positions and Intensities of the ν1+ ν2+ 3ν3, ν2+ 4ν3, and 3ν1+ 2ν2Bands of Ozone

Using a Fourier transform spectrometer, we have recorded the spectra of ozone in the region of 4600 cm⁻¹, with a resolution of 0.008 cm⁻¹. The strongest absorption in this region is due to the ν₁+ ν₂+ 3ν₃band which is in Coriolis interaction with the ν₂+ 4ν₃band. We have been able to assign more than 1700 transitions for these two bands. To correctly reproduce the calculation of energy levels, it has been necessary to introduce the (320) state which strongly perturbs the (113) and (014) states through Coriolis- and Fermi-type resonances. Seventy transitions of the 3ν₁+ 2ν₂band have also been observed. The final fit on 926 energy levels withJ_max= 50 andK_max= 16 gives RMS = 3.1 × 10⁻³cm⁻¹and provides a satisfactory agreement of calculated and observed upper levels for most of the transitions. The following values for band centers are derived: ν₀(ν₁+ ν₂+ 3ν₃) = 4658.950 cm⁻¹, ν₀(3ν₁+ 2ν₂) = 4643.821 cm⁻¹, and ν₀(ν₂+ 4ν₃) = 4632.888 cm⁻¹. Line intensities have been measured and fitted, leading to the determination of transition moment parameters for the two bands ν₁+ ν₂+ 3ν₃and ν₂+ 4ν₃. Using these parameters we have obtained the following estimations for the integrated band intensities,S_V(ν₁+ ν₂+ 3ν₃) = 8.84 × 10⁻²²,S_V(ν₂+ 4ν₃) = 1.70 × 10⁻²², andS_V(3ν₁+ 2ν₂) = 0.49 × 10⁻²²cm⁻¹/molecule cm⁻²at 296 K, which correspond to a cutoff of 10⁻²⁶cm⁻¹/molecule cm⁻².     

The FT-IR Spectrum of HCNO: The ν1, ν2, 2ν3, and ν2 + ν3 Band Systems

The infrared spectrum of HC¹⁵NO an isotopically substituted species of fulminic acid, has been measured in the range 1900-3600 cm⁻¹ at a resolution of 0.003 cm⁻¹ with a Bruker IFS 120 HR interferometer. More than 100 subbands have been assigned. Power series coefficients for these transitions are given. A Coriolis resonance between the levels 01002 (l = 0e) and 01010 (l = 1e) allows normally "forbidden" transitions to occur, some of which were observed and assigned. We correlate transition intensities and energies of the resonance system. Variations in the manifold of nν₅ states with excitation of other modes are compared.     

High-Resolution Infrared Spectroscopy of Methyl Isocyanide: The ν3, ν6, and ν7 + ν8 Bands

The vibration-rotation spectrum of methyl isocyanide (CH₃NC) has been recorded with the aid of a high-resolution Fourier transform spectrometer in the region 1370 to 1560 cm⁻¹ containing the perpendicular band of the fundamental vibration ν₆ (species E), the weaker parallel band of the ν₃ (A₁) fundamental, and the perpendicular combination band ν₇ + ν₈ (E) enhanced by Fermi resonance with ν₆. Sixteen hundred seventy well-resolved lines were assigned to 15 subbands of ν₆, 6 subbands of ν₃, and 3 subbands of ν⁻₇ + ν⁻₈. A strong x, y-Coriolis resonance between ν₃ and ν₆ and Fermi resonance between ν^±₆ and the E component ν₇ + ν₈, as well as between ν₃ and the A_1,2 components ν^±₇ + ν₈, greatly affects the spectrum. Additional weaker anharmonic interaction of ν₆ with the ν₄ + 2ν²₈ combination and higher-order rotational interactions connecting the various states were also detected in the spectrum. All of these interactions have been incorporated into a 9 × 9 Hamiltonian matrix used for modeling the upper states of the observed transitions. A set of spectroscopic constants is reported for the upper states of the bands ν₃, ν₆, and ν₇ + ν₈ and for ν₄ + 2ν²₈ which reproduces the observed lines with an overall standard deviation of 0.0012 cm⁻¹.     

Analysis of the ν1 + ν2 + ν3 band of O3

The high resolution spectrum of the ν₁ + ν₂ + ν₃ band of O₃ in the 2800-cm⁻¹ region has been analyzed using Watson's Hamiltonian. The resulting Hamiltonian constants and previously published line intensities have been used to generate a listing of line assignments, positions, absolute intensities, and ground state energies. These should be useful for atmospheric studies.     

Itinerant metamagnetic transition in Y(Co1−xFex)2

High field magnetization measurements have been performed to examine the existence of itinerant metamagnetism in exchange-enhanced systems related to YCo₂ together with Fe_1−x Co_xSi. In the Y(Co_−xFe_x)₂ system, the meta magnetism inherent in YCo₂ has been observed in 0.04 x0.07. The transition is not as sharp as in the Y(Co_1−xAl_x)₂ system. Other exchange-enhanced paramagnets Y(Co_−xCu_x)₂ and Y_1−xLa_xCo_x2 and weakly itinerant ferromagnet Fe_1−xCo_xSi exhibit no metamagnetic transition up to 430 kOe.     

Low temperature magnetocaloric effects in Dy1Ba2Cu3O7−δ and Y1Ba2Cu3O7−δ high-Tc single crystals

The heat release has been measured in high temperature superconductors during and after a change of the external magnetic field μ₀H_a ≤ 0.5 T applied parallel to the c-axis at 0.1 K ≤ T ≤ 0.45 K. Two Y123 and one Dy123 twinned single crystals were investigated. An analysis of the heat release based on the Bean model and on a model for thin superconductors in perpendicular geometry recently proposed by Brandt et al. has been carried out. During field sweep we measured ∝ H_a²dH_a/dt. This dependence can be understood within the Bean model for longitudinal geometry. The critical current densities obtained with this method are in good agreement with those from magnetization measurements. We also present measurements, and a first quantitative analysis, of dissipation due to the time relaxation of the flux line lattice after a field sweep. For the heat release a t⁻¹ dependence has been found which corresponds to a logarithmic time dependence of the magnetization. The normalized relaxation rate we obtained is in agreement with literature values.     

Superconductivity magnetism and low temperature specific heat in YBa2(Cu1−xFex)3O7−δ with δ0 and δ1

Magnetic and low temperature specific heat measurements have been performed on iron doped YBa₂(Cu_1−xFe_x)₃O_7−δ samples with different oxygen contents (δ0 and δ1). Iron doping induces an orthorhombic to tetragonal transition and a decrease of both T_c and diamagnetic signal. Low temperature specific heat measurements reveal a Schottky type anomaly for δ0 samples with x=0.01 (1.8 K) and x=0.02 (3 K). This anomaly is attributed to magnetic interactions within iron limited chains. A numerical analysis of this effect is proposed.     

The order of magnetic phase transition in La(Fe1−xCox)11.4Si1.6 compounds

Magnetic transitions in La(Fe_1−xCo_x)_11.4Si_1.6 compounds with x=0–0.08, have been studied by DC magnetic measurements and Mössbauer spectroscopy. The temperature dependence of the Landau coefficients has been derived by fitting the magnetization, M(μ₀H), using the Landau expansion of the magnetic free energy. For x0.02 there is a strongly first-order magnetic phase transition between ferromagnetic and paramagnetic (F–P) states in zero external field and a metamagnetic transition from paramagnetic to ferromagnetic (P–F) above T_c. Increasing the cobalt content drives the F–P transition towards second order and eliminates the metamagnetic transition.     

Line positions and intensities for the ν1 + ν2 and ν2 + ν3 bands of H2O

The intensities of about 90 lines of the ν₁ + ν₂ and ν₂ + ν₃ bands of H₂¹⁸O have been measured using a Fourier transform spectrum of natural water vapor. The constants involved in the rotational expansion of the transformed transition moment operators corresponding to these bands have been determined through a fit of these line intensities. The constants obtained are used to compute the whole spectrum of the ν₁ + ν₂ and ν₂ + ν₃ bands of H₂¹⁸O providing reliable line positions and intensities. For lines involving perturbed levels a comparison is given with the results obtained for H₂¹⁶O and it is shown that the results for one isotopic species cannot be transferred directly to another one.     

CO2: Global Treatment of Vibrational–Rotational Spectra and First Observation of the 2ν1 + 5ν3 and ν1 + 2ν2 + 5ν3 Absorption Bands

The effective operator approach is applied to the calculation of both line positions and line intensities of the ¹³C¹⁶O₂ molecule. About 11 000 observed line positions of ¹³C¹⁶O₂ selected from the literature have been used to derive 84 parameters of a reduced effective Hamiltonian globally describing all known vibrational–rotational energy levels in the ground electronic state. The standard deviation of the fit is 0.0015 cm⁻¹. The eigenfunctions of this effective Hamiltonian have then been used in fittings of parameters of an effective dipole-moment operator to more than 600 observed line intensities of the cold and hot bands covering the ν₂ and 3ν₂ regions. The standard deviations of the fits are 3.2 and 12.0% for these regions, respectively. The quality of the fittings and the extrapolation properties of the fitted parameters are discussed. A comparison of calculated line parameters with those provided by the HITRAN database is given. Finally, the first observations of the 2ν₁ + 5ν₃ and ν₁ + 2ν₂ + 5ν₃ absorption bands by means of photoacoustic spectroscopy (PAS) is presented. The deviations of predicted line positions from observed ones is found to be less than 0.1 cm⁻¹, and most of them lie within the experimental accuracy (0.007 cm⁻¹) once the observed line positions are included in the global fit.     

Ramans study of Y1−xPrxBa2Cu3O7−δ and YB2Cu3−xZnxO7−δ single crystals

Single crystals with known T_c values of Y_1−xPr_xBa₂Cu₃O_7−δ (Y---Pr1:2:3) and YBa₂Cu_3−xZn_3−xZn_xO_7−δ (Y---Zn1:2:3) systems are studied by Raman measurements. The Raman spectra for (Y---Pr1:2:3) single crystals show that the frequencies of Ba and O_z modes increase as the Pr content increases. The results are consistent with the hole-localization scheme proposed for the suppression of superconductivity in the polycrystalline Y---Pr1:2:3 systems. On the other hand, in the Y---Zn1:2:3 system, all the Raman modes do not change in frequencies. However, the FWHM of the Cu(2) mode increases with the decrease of T_c, indicating strong scattering of charge carriers by the substituted Zn ions in the CuO₂ planes. The induced disorder in the CuO₂ planes may be related with suppression of T_c in the Y---Zn1:2:3 system. Thus, the suppression mechanism in the Y---Zn1:2:3 systems seems to be different from that in the Y---Pr1:2:3 systems.     

The ν1 and ν3 Bands of the OOO Isotopomer of Ozone

Using 0.002 cm⁻¹ resolution Fourier transform absorption spectra of an ¹⁷O-enriched ozone sample, an extensive analysis of the ν₃ band together with a partial identification of the ν₁ band of the ¹⁷O¹⁶O¹⁷O isotopomer of ozone has been performed for the first time. As for other C_2v-type ozone isotopomers [J.-M. Flaud and R. Bacis, Spectrochim. Acta, Part A 54, 3–16 (1998)], the (001) rotational levels are involved in a Coriolis-type resonance with the levels of the (100) vibrational state. The experimental rotational levels of the (001) and (100) vibrational states have been satisfactorily reproduced using a Hamiltonian matrix which takes into account the observed rovibrational resonances. In this way precise vibrational energies and rotational and coupling constants were deduced and the following band centers ν₀(ν₃) = 1030.0946 cm⁻¹ and ν₀(ν₁) = 1086.7490 cm⁻¹ were obtained for the ν₃ and ν₁ bands, respectively.     

High-Resolution Infrared Spectra of the ν2, ν3, ν4, and 2ν3 Bands of SO3

New measurements are reported for the infrared spectrum of sulfur trioxide, ³²S¹⁶O₃, with resolutions ranging from 0.0015 cm⁻¹ to 0.0025 cm⁻¹. Rovibrational constants have been measured for the fundamentals ν₂, ν₃, and ν₄ and the overtone band 2ν₃. Comparisons are made with the earlier high-resolution measurements on SO₃, and the high correlation among some of the constants related to the Coriolis coupling of the ν₂ and ν₄ levels is discussed in order to understand the areas of disagreement with the earlier work. Splittings of some of the levels are observed and the splitting constant for K=3 of the ground state is determined for the first time. Other observed splittings include the K=1 levels of 2ν₃ (l=2), the K=2 levels of ν₃ and ν₄, and the K=3 levels of ν₂. The analysis shows that there are level crossings between the l=0 and l=2 states of 2ν₃ that allow one to determine the separation of the subband centers for these two states even though access to the l=0 state from the ground state is electric-dipole forbidden. This is a generalized phenomenon that should be found for many other molecules with the same symmetry. The l-type resonance constant, q₃, that causes the splitting of the l₃=±1, k=±1 levels of ν₃ also couples the l₃=0 and 2 states of 2ν₃.     

Luminescence properties of β-(Ga1−xInx)2O3 solid solutions

In this work, luminescence properties of β-(Ga_1−xIn_x)₂O₃ solid solutions were investigated with the purpose of making the new thermoluminophors for ultraviolet (UV) dosimetry. The doping of aliovalent cation admixture (Mg, Mo) in the β-Ga₂O₃ ceramic sample brings about the appearance of high-temperature thermoluminescence glow peaks with a maximum at 395 and 435 K. The maximum of the thermoluminophor photosensitivity shifts when the composition of solid solution changes.     

Line Intensities in the ν1, ν3, and 2ν2 Bands of H2Se

Using a high-resolution Fourier transform spectrum of hydrogen selenide in natural abundance, about 600 intensities of lines belonging to the ν₁, ν₃, and 2ν₂ bands of H₂⁸⁰Se were measured. A least-squares fit of these intensities was performed, allowing determination of the vibrational transition moments of these bands and their rotational corrections. Finally, the first derivatives of the dipole moment with respect to the normal coordinates q₁ and q₃ were found to be ∂μ_χ/∂q₁ = (−0.5938 ± 0.010) × 10⁻¹ and ∂μ_z/∂q₃ = (0.5683 ± 0.010) × 10⁻¹ Debye, respectively.     

Low field microwave absorption of YBa2Cu3O7−δ thin films

The modulated microwave absorption in YBa₂Cu₃O_7−δ thin films was studied as a function of temperature, modulation amplitude, and microwave power. The comparative nature of weak links in YBaCuO thin films, ceramics, and powders is discussed.     

Thermogalvanic power and fast ion conduction in δ-Bi2O3 and δ-(Bi2O3)1−x(R2O3)x with R = Y, Tb---Lu

The thermogalvanic power (Seebeck coefficient) of O^2- conducting δ-Bi₂O₃ and δ-(Bi₂O₃)_1−x(Y₂O₃)_x has been measured directly as a function of temperature and partial oxygen pressure in N₂---O₂ mixtures. The of δ-(Bi₂O₃)_0.75(R₂O₃)_0.25 with R = Tb---Lu was indirectly determined using an isothermal concentration cell technique. Except for pure δ-Bi₂O₃, the heat of transport is much smaller than the activation energy for O^2- conduction for all materials. The vibrational freedom of O²⁻ ions in all δ-stabilized materials is reflected in their IR spectra at room temperature. Two prototypes of a thermogalvanic P_O2 meter were tested.     

Surface reaction kinetics in oxygen nonstoichiometry re-equilibration of BaTiO3−δ

We report the (bare) surface redox-reaction rate constant that was determined, along with the chemical diffusivity , by a conductivity relaxation technique on Al-doped single crystal and undoped polycrystal BaTiO_3−δ as a function of oxygen activity in its range of −16≤log a_O2≤0 at elevated temperatures of 800–1100 °C. It takes a value in the range of −4<log( /cm s⁻¹)≤−1, which is even larger than that of the oxides that are considered best as oxygen membranes. It has been found that the surface reaction step grows more rate controlling as the electronic transference number gets smaller or the electronic stoichiometric composition (δ≈0) is approached. The oxygen potential drop due to the surface reaction was estimated by an oxygen concentration cell technique. The oxygen potential drop grows larger as the stoichiometric composition is approached, that is in accord with the variation of against oxygen activity.