A quantitative HPLC method for determining lactide content using hydrolytic kinetics

A new method for quantitative analysis of lactide has been developed by applying chemical kinetics to a HPLC system. The most important advance is its practical approach to the quantification of analytes that are unstable in the HPLC mobile phase. In HPLC analysis, anhydrous mobile phases cannot separate lactide from impurities, and only mixtures of water and organic solvent can achieve effective separation. By selecting conditions for testing and studying the kinetics of lactide hydrolysis, extensive experiments revealed that lactide degradation can be treated as a pseudo-first-order reaction under the given HPLC conditions, and lactide content or purity can be quantitatively determined. This method is practical for measuring the purity of the intermediate lactide in polylactic acid (PLA) production and the lactide content in PLA. When lactide content is high, the relative standard deviation (RSD) of the measurements is <2.0%, while RSD is <5.0% at low levels, which indicates that the method is suitably precise.     

Degradation kinetics of functionalized novolac resins

We report the relationships between the degradation behaviors (i.e. the degradation kinetics, degradation activation energy, weight loss conversion, and char formation) and the structure features in three modified novolac resins bearing different curable functional groups and aromatic units i.e. Carbonyl phenyl azo novolac resin (CPAN), 4-(4-hydroxyphenyl azo) benzyl ester novolac resin (HPDEN) and Carbonyl phenyl 4-(4-hydroxyphenyl azo) benzyl ester novolac resin (CHABN). These modifications enhanced the thermal stability of the cured novolac resins by delaying the decomposition temperature up to 30-100 °C and produced prominent residue char yield up to 68% (CPAN), 56% (HPDEN) and 64% (CHABN), respectively. The two heavily cross-linked samples, CPAN and CHABN displayed even higher Ea than HPDEN. All modified novolacs displayed much higher decomposition activation energy (over 237 KJ/mol*K) compared with the generic phenolic (PN).     

Electron self-exchange kinetics determined by MARY spectroscopy: theory and experiment

The electron self-exchange between a neutral molecule and its charged radical, which is part of a spin-correlated radical ion pair, gives rise to line width effects in the fluorescence-detected MARY (magnetic field effect on reaction yield) spectrum similar to those observed in EPR spectroscopy. An increasing self-exchange rate (i.e., a higher concentration of the neutral molecule) leads to broadening and subsequent narrowing of the spectrum. Along with a series of MARY spectra recorded for several systems (the fluorophores pyrene, pyrene-d(10) and N-methylcarbazole in combination with 1,2- and 1,4-dicyanobenzene) in various solvents, a theoretical model is developed that describes the spin evolution and the diffusive recombination of the radical pair under the influence of the external magnetic field and electron self-exchange, thereby allowing the simulation of MARY spectra of the systems investigated experimentally. The spin evolution of the radicals in the pair is calculated separately using spin correlation tensors, thereby allowing rigorous quantum mechanical calculations for real spin systems. It is shown that the combination of these simulations with high resolution, low noise experimental spectra makes the MARY technique a novel, quantitative method for the determination of self-exchange rate constants. In comparison to a simple analytical formula which estimates the self-exchange rate constant from the slope of the linear part of a line width vs concentration plot, the simulation method yields more reliable and accurate results. The correctness of the results obtained by the MARY method is proved by a comparison with corresponding data from the well-established EPR line broadening technique. With its less stringent restrictions on radical lifetime and stability, the MARY technique provides an alternative to the classical EPR method, in particular for systems involving short-lived and unstable radicals.     

Degradation kinetics of VX on concrete by secondary ion mass spectrometry

At trace coverages on concrete surfaces, the nerve agent VX (O-ethyl S-2-diisopropylaminoethyl methyl phosphonothiolate) degrades by cleavage of the P-S and S-C bonds, as revealed by periodic secondary ion mass spectrometry (SIMS). The observed kinetics were (pseudo-) first-order, with a half-life of 2-3 h at room temperature. The rate increased with surface pH and temperature, with an apparent second-order constant of k(OH) = 0.64 M(-1) min(-1) at 25 degrees C and an activation energy of 50-60 kJ mol(-1). These values are consistent with a degradation mechanism of alkaline hydrolysis within the adventitious water film on the concrete surface. Degradation of bulk VX on concrete would proceed more slowly.     

苯酚及其光催化降解中间产物的HPLC法同时测定

研究了苯酚光催化降解过程中苯酚及３种中间体（对苯二酚、对苯二醌、邻苯二酚）含量的高效液相色谱测定方法,获得了同时测定４种物质的较佳液相色谱条件：流动相Ｖ（甲醇）：Ｖ（水）＝３０：７０,流速为０．８ｍｌ／ｍｉｎ,进样体积为２０ｕＬ,检测波长为２８０ｎｍ。用外标法进行了定量,相对标准偏差和回收率分别为０．３１％～１．１３％和９７．２％～１０１．７％,该法快速、简便、准确,适合于苯酚光催化降解过程中样品     

硫辛酸片含量与降解物的高效液相色谱测定研究

建立了硫辛酸片中硫辛酸及其降解物快速测定的高效液相色谱方法。采用Waters XBridge色谱柱(5μm,150 mm×4.6 mm),流动相为0.05 mol/L磷酸二氢钾溶液(磷酸调至pH 2.5)-乙腈-甲醇(50∶45∶5),流速为1.0 mL/min,进样量为20μL,二极管阵列检测器,检测波长为220 nm,全波长扫描范围为200～400 nm,柱温为室温。结果表明,在上述色谱条件下,硫辛酸浓度在0.4～20.0 mg/L范围内线性关系良好(r=0.999 9);其检出限为0.2 mg/L;定量下限为0.6 mg/L;精密度RSD(n=12)为3.4%;加标回收率为100.9%,RSD为2.0%。该法简便、快速、准确、选择性好、灵敏度高,可用于硫辛酸片含量与降解物的测定。     

Degradation kinetics and rheology of biodegradable polymers

Aliphatic polyesters are readily degradable polymers, hydrolysis being the dominant mechanism of degradation. On one side, this makes them extremely interesting for industrial applications in which degradability is required. On the other side, they present considerable processing problems due to their sensitivity to process and stocking conditions. In this work, the degradation of two aliphatic polyesters was studied in the molten state by analysing the rheological properties with the aim of defining the significance of previous thermal history and of residence time at a given temperature. Rheological measurements were adopted as a mean of analysis for degradation kinetics because rheological properties are strongly dependent on molecular weight. In particular, the change in complex viscosity (at constant frequency) as a function of time at different temperatures was measured. The experimental results show that a significant reduction of viscosity takes place during the isothermal tests for all the materials analyzed. This reduction was ascribed to the hydrolysis reaction. Indeed, a dried sample showed only a marginal viscosity reduction. After this initial decrease, an increase in viscosity (more pronounced at higher temperatures) was found for all the materials and at all the temperatures investigated. This phenomenon was ascribed to the inverse reaction (esterification) taking place in the absence of water. The dried sample showed, in fact, a much faster increase in viscosity with respect to the undried one. The degradation kinetics was modeled considering both forward and reverse reactions. The relative rate of the two reactions depends on the moisture content, and thus the water evaporation from the sample was kept into account in the rate equations.     

Buffer effect on the kinetics of ornithine carbamyl transferase by HPLC

A kinetic study of ornithine carbamyl transferase (OCT) from Streptococcus faecalis has been carried out, employing a new HPLC method based on the direct determination of citrulline. A different kinetic pattern was observed in tris(hydroxymethyl)-aminomethane (TRIS) and triethanolamine (TEA) buffers: a ping-pong or an ordered sequential mechanism are suggested, respectively. The inhibition of Tris buffer on OCT reaction has also been demonstrated. The inhibition of Tris buffer on OCT reaction has also been demonstrated.     

Half-life of radionuclides determined by the reference source method

Summary An approach for half-life determination using the reference source method associated with gamma-spectrometry with a Ge detector is presented. The method reduces the contribution of the type B component of the total uncertainty. The independence of the method regarding the instrumental interferences or radiochemical impurities was evidenced. However, there are some limitations when the method is applied for a genetically-related impurity with the same or very similar energy to that of the radionuclide to be measured, e.g., if ⁹⁹Mo in a ^99mTc sample is present. The measured half-life values are in good agreement with those of the literature and the associated uncertainties are lower than 0.1%.     

Study of Clethodim Degradation and By-Product Formation in Chlorinated Water by HPLC

Two of the most commonly used chlorinating agents for water disinfection, hypochlorite and chloramines, were employed to investigate the degradation of clethodim in conditions simulating tap water treatment. The main clethodim degradation products were identified by using liquid chromatography (LC) coupled with mass spectrometry (MS). The main degradation process was oxidation to sulfoxide and then to sulfone. Degradation half-life was calculated for both parent clethodim and the first degradation product, clethodim sulfoxide. Whereas some other different minor by-products were identified when the degradation occurs with either sodium hypochlorite or chloramines, no other chlorinated by-products were found under the conditions tested.     

Quantitative kinetics of proteolytic enzymes determined by a surface concentration-based assay using peptide arrays

Peptide arrays have emerged as a key technology for drug discovery, diagnosis, and cell biology. Despite the promise of these arrays, applications of peptide arrays to quantitative analysis of enzyme kinetics have been limited due to the difficulty in obtaining quantitative information of enzymatic reaction products. In this study, we developed a new approach for the quantitative kinetics analysis of proteases using fluorescence-conjugated peptide arrays, a surface concentration-based assay with solid-phase peptide standards using dry-off measurements, and compared it with an applied concentration-based assay. For fabrication of the peptide arrays, substrate peptides of cMMP-3, caspase-3, caspase-9, and calpain-1 were functionalized with TAMRA and cysteine, and were immobilized onto amine-functionalized arrays using a heterobifunctional linker, N-[γ-maleimidobutyloxy]succinimide ester. The proteolytic activities of the four enzymes were quantitatively analyzed by calculating changes induced by enzymatic reactions in the concentrations of peptides bound to array surfaces. In addition, this assay was successfully applied for calculating the Michaelis constant (K(m,surf)) for the four enzymes. Thus, this new assay has a strong potential for use in the quantitative evaluation of proteases, and for drug discovery through kinetics studies including the determination of K(m) and V(max).     

HPLC测定砷对星形胶质细胞内GSH含量的影响

建立高效液相色谱法(HPLC)检测星形胶质细胞(AC)内谷胱甘肽(GSH)含量的测定方法,探讨急性砷暴露对AC内GSH水平的影响,为砷对神经系统损伤机制研究提供检测手段.结果表明,该方法准确、灵敏、可靠.AC内GSH含量随急性砷暴露剂量增加而逐渐升高.     

Electron inity of 1,3,5,7-cyclooctatetraene determined by the kinetic method

The kinetic method is used to determine the electron inity (EA) of 1,3,5,7-cyclooctatetraene (COT), a compound that undergoes a significant structural change upon electron attachment. Collision-induced dissociation of anionic clusters of COT with a set of reference compounds (Ref), [COT·Ref]^?·, at various collision energies, allowed deconvolution of the relative enthalpies and entropies of the competitive reactions. The adiabatic EA of COT is determined to be 0.58±0.10 eV, in good agreement with the value, 0.58±0.04 eV, of Wentworth and Ristau (J. Phys. Chem. 1969, 73, 2126) determined by thermal electron detachment as well as the more recent value, 0.55±0.02 eV, of Kato et al. (J. Am. Chem. Soc. 1997, 119, 7863) determined by equilibrium electron transfer with molecular oxygen. A large entropy difference, 25.6±10.0 e.u. (J mol^?1 K^?1), is observed between the two dissociation channels. This entropy difference corresponds to a negative 14.7±13.0 e.u. change for the dissociation of the dimer to give COT^?· and the neutral reference compound and a positive 10.9±8.4 e.u. entropy change for the dissociation of the dimer to give Ref^?· and neutral COT.     

Measurement of reaction kinetics by a pressure rise method

Decomposition of urea nitrate in an initially evacuated system gave sigmoidal pressurevs. time curves. The experimental kinetic data fit the growing nuclei model with a measured enthalpy of activation of 142±12.5 kJ/mole as compared to 115±11.3 kJ/mole obtained thermogravimetrically. This higher value ofH is explained on the basis of two factors: 1) the inhibitory effect of the product gases and 2) self heating, whose extent increasedH by about 12.5 kJ/mole.

---

Zusammenfassung Die Zersetzung von Harnstoffnitrat in einem anfanglich evakuierten System ergab sigmoide Druck-Zeit Kurven. Die kinetischen Versuchsangaben können einem Kernwachstums-Modell einer gemessenen Aktivierungsenthalpie von 142±12,5 kJ/mol angepaßt werden, im Vergleich zu den auf thermogravimetrischen Weg ermittelten Wert von 115±11.3 kJ/Mol. Dieser hohe Wert vonH, wird auf Grund zweier Faktoren erklärt: 1) der Hemmungseffekt der Produktgase und 2) Selbsterhitzung, deren AusmaßH um etwa 12.5 kJ/Mol erhöhte.

---

Résumé La décomposition du nitrate d'urée dans un système initialement mis sous vide, donne des courbes sigmoïdales de pression en fonction du temps. Les données cinétiques expérimentales peuvent être ajustées à un modèle de grossissement de germes, avec une enthalpie d'activation mesurée de 142±12.5 kJ/mole, comparée à 115±11.3 kJ/mole obtenue par thermogravimétrie. Cette valeur plus élevée deH s'explique sur la base de deux facteurs: 1) l' effet inhibiteur des gaz produits et 2) phénomène d'autoéchauffement qui augmente la valeur deH d'environ 12.5 kJ/mole.

---

. , 142+-12.5 / 115 + 11.3 /, . H : 1) 2) , 12.5 /.

     

Mononucleotide gas-phase proton affinities as determined by the kinetic method

The goal of this work is to determine the proton affinities of (deoxy)nucleoside 5'- and 3'-monophosphates (mononucleotides) using the kinetic method with fast atom bombardment mass spectrometry. The proton affinities of the (deoxy)nucleoside 5'- and 3'-monophosphates yielded the following trend: (deoxy)adenosine monophosphates > (deoxy)guanosine monophosphates > (deoxy)cytidine monophosphates > deoxythymidine/uridine monophosphates. In all cases the proton affinity decreases or remains the same with the addition of the phosphate group from those values reported for nucleosides. The proton affinity is dependent on the location of the phosphate backbone (5'-vs. 3'-phosphates): the 3'-monophosphates have lower proton affinities than the 5'-monophosphates except for the thymidine/uridine monophosphates where the trend is reversed. Molecular modeling was utilized to determine if multiple protonation sites and intramolecular hydrogen bond formation would influence the proton affinity measurements. Semiempirical calculations of the proton affinities at various locations on each mononucleotide were performed and compared to the experimental results. The possible influence of intramolecular hydrogen bonding between the nucleobases and the phosphate group on the measured and calculated proton affinities is discussed.     

Quantitative analysis of some pharmaceuticals by the HPLC method

A procedure for the quantitative analysis of a new multicomponent medicinal preparation “Pentalgin with propyphenazone and drotaverine” by the HPLC method is developed. Analysis of model mixtures containing all active and auxiliary substances of the tablets confirms the reliability of the obtained results. The analysis results of sample tablets correspond to the requirements of the normative-engineering specifications and technological loadings. The technique is suggested for use in the pharmacopoeia monograph of the enterprise producing the given preparation.