A study of the interactions between carboplatin and blood plasma proteins using size exclusion chromatography coupled to inductively coupled plasma mass spectrometry

To study the carboplatin–protein interaction, a sensitive method using size exclusion chromatography coupled to inductively coupled plasma mass spectrometry (SEC–ICP–MS) was developed. The complexes formed between plasma proteins and carboplatin were monitored and identified with this method. Composite blood plasma samples from patients who were undergoing chemotherapy were analyzed, and carboplatin was found to bind plasma proteins. In addition, blank plasma samples were spiked with carboplatin and were analyzed as a time course study, and the results confirmed that carboplatin formed complexes with plasma proteins, primarily albumin and γ-globulin. To further substantiate the study, these two proteins were incubated with carboplatin. The binding between carboplatin and these proteins was then characterized qualitatively and quantitatively. In addition to a one-to-one binding of Pt to protein, protein aggregation was observed. The kinetics of the binding process of carboplatin to albumin and γ-globulin was also studied. The initial reaction rate constant of carboplatin binding to albumin was determined to be 0.74 M⁻¹ min⁻¹, while that for γ-globulin was 1.01 M⁻¹ min⁻¹, which are both lower than the rate constant of the cisplatin–albumin reaction previously reported.     

电感耦合等离子体质谱法测定高纯金中铝、砷、铋、铬、铁、铅、锑、硒、碲、铱痕量元素

建立了微波消解-内标法-标准加入-ICP-MS法测定高纯黄金中铝、砷、铋、铬、铁、铅、锑、硒、碲、铱等痕量元素的分析方法.从试样溶解方式、内标元素及同位素的选择、仪器检测模式的优化及降低基体抑制效应等方面进行优化.实验加标回收率为99.5％ ～110％,相对标准偏差(RSD)为0.050％ ～6.5％.实验的准确度和精...     

电感耦合等离子体质谱法测定花生中34种元素

建立了微波消解-碰撞/反应池(ORS)电感耦合等离子体质谱仪(ICP-MS)同时测定花生中的Na、Mg、Ca、Fe、Se、Mo和稀土元素等34种元素的分析方法。样品经微波消解后,在线加入内标元素45Sc、72Ge、103Rh、115In和209Bi消除基体效应,应用碰撞反应池技术,以4.5 mL/min流速的氦气作为碰撞反应气,有效消除多原子离子产生的质谱干扰。各元素的检出限为0.0003～17.37ng/mL,相对标准偏差(RSD)低于2.9%;标准物质的测定值均在标准值范围内,结果令人满意。该方法可用于花生中多种元素的同时测定。     

Determination of B in body fluids by isotope dilution inductively coupled mass spectrometry with direct injection nebulization

The determination of B in small volumes of undigested blood plasma and urine by isotope dilution and high efficiency direct injection nebulization (DIN) inductively coupled plasma mass spectrometry (ICP-MS) is proposed. The C interference over ¹¹B was removed by precipitating the samples proteins. Samples aliquots of 1 ml were spiked with an enriched ¹⁰B solution and shaken during 1 h to attain the isotopic equilibrium. Thereafter, the sample proteins were denaturated with nitric acid and the supernatant was analyzed. This procedure was effective to reduce C concentrations in approximately 94%. Sample volumes of 50 μl were introduced into the ICP by the direct injection nebulizer producing transient signals lasting 30 s for B isotopes measurements. Precision of ¹⁰B/¹¹B measurements was characterized by relative standard deviation (RSD) lower than 1%. The instrumental mass discrimination factor was lower than 5%. Total B concentrations from 100 to 135 μg L⁻¹ in plasma and 0.499 to 3.021 mg L⁻¹ in urine samples were found. Reproducibility of triplicate samples was characterized by RSD<2.0% for plasma and lower than 1.3% for urine samples. Limit of detection (3σ) of 0.6 ng ml⁻¹ was calculated from synthetic blood plasma blank. Results of the denatured supernatant and digested plasma and urine samples were comparable at the 95% confidence level.     

Microwave-assisted versus conventional decomposition procedures applied to a ceramic potsherd standard reference material by inductively coupled plasma atomic emission spectrometry

Inductively coupled plasma atomic emission spectrometry (ICP-AES) is a powerful, sensitive analytical technique with numerous applications in chemical characterization including that of ancient pottery, mainly due to its multi-element character, and the relatively short time required for the analysis. A critical step in characterization studies of ancient pottery is the selection of a suitable decomposition procedure for the ceramic matrix. The current work presents the results of a comparative study of six decomposition procedures applied on a standard ceramic potsherd reference material, SARM 69. The investigated decomposition procedures included three microwave-assisted decomposition procedures, one wet decomposition (WD) procedure by conventional heating, one combined microwave-assisted and conventional heating WD procedure, and one fusion procedure. Chemical analysis was carried out by ICP-AES. Five major (Si, Al, Fe, Ca, Mg), three minor (Mn, Ba, Ti) and two trace (Cu, Co) elements were determined and compared with their certified values. Quantitation was performed at two different spectral lines for each element and multi-element matrix-matched calibration standards were used. The recovery values for the six decomposition procedures ranged between 75 and 110% with a few notable exceptions. Data were processed statistically in order to evaluate the investigated decomposition procedures in terms of recovery, accuracy and precision, and eventually select the most appropriate one for ancient pottery analysis.     

Determination of lithium in biological samples by inductively coupled plasma mass spectrometry

Lithium was determined in human serum by inductively coupled plasma mass spectrometry. Sample preparation was kept to the minimum: serum samples were diluted and beryllium was added as internal standard. Special attention was given to the choice of the internal standard and to the occurrence of memory effects. To test the accuracy of the method several biological reference materials were analysed, namely a “Second-Generation” Biological Reference Material (Freeze-Dried Human Serum) (University of Ghent), Human Serum SRM 909, Whole Egg Powder SRM 1845 and Mixed Human Diet SRM 1548 (National Institute of Standards and Technology). The results were compared with those obtained by other techniques. For the “second-generation” reference freeze-dried human serum a mean lithium concentration of 15.10 ng g^?1 with a standard deviation of 0.54 ng g^?1 dry weight was found. Analyses on serum samples from healthy individuals yielded lithium concentrations ranging from 0.22 to 0.97 μg l^?1.     

On the determination of platinum group elements in environmental materials by inductively coupled plasma mass spectrometry and microwave digestion

The interferences from Cd, Cu, Hf, Pb, Sr, Zn, Zr and Y on the inductively coupled plasma quadrupole mass spectrometry (ICP-MS) determination of Pt, Pd, Rh, Ru and Ir in geological (Pt-ore SARM-7, abundance range for platinum metals 0.07-3.74 μg/g) and environmental samples (sediment JSd-2 abundance range for Pt and Pd 0.0167-0.021 μg/g; road dust and plant sample) are evaluated using model solutions, real samples and comparison to inductively coupled plasma atomic emission spectrometry (ICP-AES) results. Pt, Rh, Ru and Ir can be determined usually after introduction of corrections for the interference in all investigated materials though in sediments the direct determination of Pt might be a problem depending on the actual Hf concentrations. The direct determination of Pd (after microwave-assisted acid digestion) is possible in ores using all investigated isotopes (, , ), in plants using and correction for the interferences of Zr, Mo and Cd, and not possible in sediments and road dust. Therefore, we developed a procedure for isolation of Pd using its diethyl-dithio-carabamate (DDTC) complex. The detection limits for Pt, Pd and Ir are 0.015 ng/g, and for Ru and Rh 0.03 ng/g.     

Determination of refractive and volatile elements in sediment using laser ablation inductively coupled plasma mass spectrometry

Wet-milling protocol was employed to produce pressed powder tablets with excellent cohesion and homogeneity suitable for laser ablation (LA) analysis of volatile and refractive elements in sediment. The influence of sample preparation on analytical performance was also investigated, including sample homogeneity, accuracy and limit of detection. Milling in volatile solvent for 40 min ensured sample is well mixed and could reasonably recover both volatile (Hg) and refractive (Zr) elements. With the exception of Cr (−52%) and Nb (+26%) major, minor and trace elements in STSD-1 and MESS-3 could be analysed within ±20% of the certified values. Comparison of the method with total digestion method using HF was tested by analysing 10 different sediment samples. The laser method recovers significantly higher amounts of analytes such as Ag, Cd, Sn and Sn than the total digestion method making it a more robust method for elements across the periodic table. LA-ICP-MS also eliminates the interferences from chemical reagents as well as the health and safety risks associated with digestion processes. Therefore, it can be considered as an enhanced method for the analysis of heterogeneous matrices such as river sediments.     

Bromate assay in water by inductively coupled plasma mass spectrometry combined with solid-phase extraction cartridges

Based on selective sorption of bromide, bromoacetic acids (BAA) and bromomethanes on solid-phase extraction (SPE) cartridges, a sensitive and convenient method was developed for the determination of bromate in waters by inductively coupled plasma mass spectrometry (ICP–MS). Dionex OnGuard Ag and reversed-phase (RP) cartridges were tested for retention characteristics for bromide, BAA and bromomethanes. When a sample acidified with nitric acid was passed through an RP cartridge, BAA and bromomethanes were retained, afterwards bromide was absorbed as a precipitate of silver bromide and bromate was unretained when the nearly neutral sample passed a combination of Ag and H cartridges. After SPE pretreatment the recovery of bromate was 96–106%, and bromide remaining in the aqueous phase was found to be less than 0.06 g L^–1 when the original bromide concentrations were less than 5 mg L^–1. Effectiveness of stacked Ag and H cartridges in removing bromide from chloride-containing samples was also examined. Common cations and other anions did not interfere with bromate determination. The detection limit for bromate is 57 ng L^–1. This method has been applied to analyse waters from various sources, and the recovery of the spiked bromate was in the range of 92–107%.     

Using dried-droplet laser ablation inductively coupled plasma mass spectrometry to quantify multiple elements in whole blood

This paper describes a simple procedure for the direct analysis and determination of multiple elements in dried blood samples on a filter membrane using laser ablation coupled with inductively coupled plasma mass spectrometry (LA-ICP-MS). With this technique, we simultaneously quantified 13 elements in whole blood: Be, Mn, Co, Ni, Tl, Bi, Sb, Pb, Cu, Zn, Ba, Mg, and Cd. The measured accuracies was in agreement with the Seronorm CRM certified values, except for Mn, Zn, Ba and Cd, which presented absolute differences higher than the expanded uncertainty for these elements. The within-run precision was less than 5.7% (relative standard deviation, RSD), except for the analyses of Be, and Mn (8.6% and 11.1%, respectively). The reproducibility (between-run precision) was calculated in terms of the RSD obtained for 12 analyses (i.e., four replicates of each sample in three analytical runs). Apart from Be, Mn, and Zn, the reproducibilities of all the elements listed above ranged between 4.0% and 8.5%. In contrast, for Cd, the concentration obtained was significantly different from the certified value; analyses of this element exhibited low reproducibility. Applying the matrix-matched calibration method, the accuracy for Cd measured was in agreement with both SRM966 and BCR 635; thus, matrix-matched calibration is a practical means of overcoming matrix-enhancement effects for the quantification of Cd. Sample throughput (ca. 5 min per sample) made it possible to rapidly screen a larger number of samples relative to other techniques that require time-consuming sample preparation steps (e.g., removal of a portion of the solid sample or digestion).     

Determination of 28 selected elements in textiles by axially viewed inductively coupled plasma optical emission spectrometry

A simple, robust and reliable analytical procedure for the determination of 28 selected elements, namely Al, As, Ba, Be, Bi, Ca, Cd, Co, Cr, Cu, Fe, K, Hg, Mg, Mn, Mo, Na, Ni, Pb, Sc, Si, Se, Sn, Sm, Sr, Tl, V, and Zn in textile materials by inductively coupled plasma optical emission spectrometry (ICP-OES) after microwave digestion of samples was optimized and validated in this work. The total amount of elements present in textile samples was determined after microwave digestion of materials in 7 mol/L nitric acid within the optimal working program: 5 min at 150 °C (power 250 W), 15 min 180 °C (300 W) and 20 min at the maximum temperature of 200 °C (350 W). For the quality control reasons, which were ascertained by analysis of the certified cotton trace elements reference material IAEA-V9, the ICP-OES method was optimized through several parameters: by comparing Meinhard and Gemcone Low Flow nebulizers efficiency, ranging nebulizer gas flows from 0.6 to 1.0 L/min, ranging sample flows from 0.8 to 1.2 mL/min, testing RF power from 1200 to 1400 W, detecting data acquisition time (read time) from 0 to 527 s, ranging washing (delay) time from 0 to 408 s, as well as by checking the occurring interferences for the optimal line selection. Validation included determination of linearity, selectivity, accuracy, reproducibility, precision and limits of detection calculated for all 28 selected elements of interest. The developed analytical procedure was successfully applied on textile fibers (cotton, flax and hemp) as well as on standard knitted textile sample materials (cotton and wool).     

Investigation of four digestion procedures for multi-element determination of toxic and nutrient elements in legumes by inductively coupled plasma-optical emission spectrometry

A simple and reliable multi-element procedure for determination of essential (Cr, Cu, Fe, Mg, Mn, Zn) and toxic (Al, Cd, Pb) elements in legumes by inductively coupled plasma-optical emission spectrometry (ICP-OES) was developed. In this contribution, four different digestion procedures were thoroughly investigated and accurately evaluated with respect to their affect on the analysis of legumes. These included wet digestion with HNO₃/H₂SO₄ and HNO₃/H₂SO₄/H₂O₂, and dry ashing with Mg(NO₃)₂ and Mg(NO₃)₂/HNO₃. Two calibrations (aqueous standard and standard addition) procedures were studied, and proved that standard addition was preferable for all analytes. ICP-OES operating parameters, such as radio-frequency (RF) incident power, sample uptake flow rate and nebulizer argon gas flow rate were optimized. The precision as repeatability, expressed as relative standard deviation (R.S.D.) for aqueous standard containing 250 μg l⁻¹ of each analyte was in the range1.5-8.0%. The accuracy, expressed as relative error was generally varied in the range of 0.5-10% for all analytes, while the quantification limits were lower than 2.5 μg g⁻¹. Although, acceptable results were obtained from all developed procedures, wet digestion method with HNO₃/H₂SO₄/H₂O₂ is recommended for better recovery. The good agreement between measured and certified concentrations with respect to IAEA-331 and IAEA-359 (CRM's supplied by IAEA, International Atomic Energy Agency) indicates that the developed analytical method is well suited for determination of toxic and nutrient elements in legumes and possibly similar matrices.     

微波消解-电感耦合等离子体质谱(ICP-MS)法测定土壤七种金属元素

实验室比对盲样测定是检验实验室能力验证、实验室资质认定、机构考核的主要手段。为研究并解决测试实验室比对土壤盲样中铍、钒、镍、铜、锌、镉、铅的含量,采用微波消解电感耦合等离子体质谱(ICP-MS)法对土壤盲样进行研究,探讨了不同消解酸体系,检出限和定量限、测试模式和干扰消除、精密度和加标回收率、质控样品进行研究。结果表明：用6 mL HNO3,2 mL HCl和1 mL HF为混合酸体系,各待测元素标准曲线相关系数大于0.9995,检出限在0.001~2.985 mg.L-1^,定量限在0.003~9.94 mg.L-1^,采用氦气碰撞模式测试钒、镍、铜、锌、镉和铅,可以有效的降低多原子离子的干扰;采用no gas模式测试铍,可以有效的提高铍的测试灵敏度。方法精密度为0.2%~6.2%(n=6),加标回收率为92.3%~110.6%,采用土壤标准样品(GSS-4)进行全过程质控研究分析,各元素结果均在标准值参考范围内。用ICP-OES法测试土壤盲样中七种待测金属元素含量与用铑为内标的ICP-MS进行比对,测量分析结果基本一致。     

电感耦合等离子体质谱法测定固体生物质燃料中重金属

为开展重金属监测及环境保护,本文建立了电感耦合等离子体质谱法测定固体生物质燃料中重金属方法。对样品全消解酸溶法进行了实验研究,确定了微波消解酸体系和微波消解程序。采用Ge和In作为内标元素消除仪器干扰,方法线性关系良好,线性系数>0.999,检出限为0.001～0.089mg/kg。采用标准物质对方法准确性和稳定性进行验证,各元素测定值均在标准证书值范围内,相对标准偏差在0.36%～3.96%,Hg的加标平均回收率为104.7%。通过3家实验室协同实验验证了方法准确性,并给出了方法精密度。     

Determination of trace elements in residual oil by high-resolution inductively coupled plasma mass spectrometry

An analytical method using high-resolution inductively coupled plasma mass spectrometry (HR-ICP-MS) for rapid simultaneous determination of 20 elements, including Na, Mg, Al, Ca, Ti, V, Mn, Fe, Co, Ni, Cu, Zn, Ga, As, Mo, Cd, Sn, Sb, Ba, and Pb elements, in residual oil was described. The sample was dissolved in HNO₃ by microwave digestion, and then the above 20 elements in the solution were analyzed directly by HR-ICP-MS. Most of the spectral interferences could be avoided by measuring in the high-resolution mode. The matrix effect caused by the sample-digesting solution and corrected by Sc, Rh, and Bi as the internal standard elements was studied in detail. The optimum condition of the determination was also tested and discussed. The result showed that the detection limits of the method were in the range of 0.014 to 11.6 μg L⁻¹; the relative standard deviation was less than 3.8% and recoveries in the samples were in the range of 88.4% to 108.0%. This method can be used to determine the trace elements in residual oil with the features of accurate, rapid, and convenient determination.     

Determination of major, minor and trace elements in cobalt-substituted lithium nickelate ceramic powders by inductively coupled plasma optical emission spectrometry

An analytical method was developed for the determination of three major (Li, Ni and Co) and fourteen minor or trace elements (Al, Ba, Ca, Cu, Cr, Fe, K, Mg, Mn, Na, Si, Sr, Ti and V) in LiNi_1−x Co _x O₂ (x = 0.2–0.8) ceramic powders by inductively coupled plasma optical emission spectrometry. Sample dissolution was achieved by 25% nitric acid digestion in a microwave oven. For each element, an analytical line free from spectral interferences was selected. A detailed study of matrix effects over a wide interval of total excitation energy (TEE) lines (1.62–16.50 eV) was performed at near-robust plasma conditions. A remarkable enhancement in atomic lines with TEE <4 eV was noticed, whereas a significant reduction in atomic and ionic lines with TEE >4 eV was observed. The extrapolation to infinite dilution method was successfully used to overcome these nonspectroscopic interferences. Detection limits (3σ) varied from 0.21 mg kg⁻¹ for Sr to 49.7 mg kg⁻¹ for Na. The precision of determination (obtained as the relative standard deviation) was lower than 1% for the major elements Li, Ni and Co and between 0.69 and 10% for minor and trace elements. The accuracy of the method ranged from 91 to 101% for major elements, and from 90 to 110%, or close to this range, for most of the impurities in both of the samples studied.      

Determination of cosmochemically volatile trace elements in chondritic meteorites by inductively coupled plasma mass spectrometry

We have developed a method for the quantification of 14 cosmochemically moderately volatile to highly volatile trace elements (Cu, Zn, Ga, Se, Rb, Ag, Cd, In, Sn, Sb, Te, Cs, Tl, and Bi) in chondritic meteorites by ICPMS. The method utilizes internal standardization via addition of Be, Rh, Re, and U and multiple single point matrix-matched external calibrations with Allende standard reference meteorite to provide drift corrected calibration within an ICPMS procedure. We have demonstrated our method's precision and accuracy by performing replicate dissolutions and analyses of 0.05-0.10 g samples of a homogenized sample of the CM2 Murchison meteorite and compared our results to literature values for this meteorite. Our procedure allows for a rapid and accurate determination of the cosmochemically important VTEs in chondritic meteorites providing the means for an even more comprehensive elemental analysis of a single sample of chondritic material.     

电感耦合等离子体质谱法测定三水铝土矿中的15种有效稀土元素

建立电感耦合等离子体质谱法测定三水铝土矿中15种有效稀土元素的分析方法。参考三水铝土矿中有效铝的概念,提出了有效稀土元素的概念,并对三水铝土矿中稀土元素的回收利用的可行性进行了评价。模拟低温拜耳法生产氧化铝的工艺,对三水铝土矿中稀土元素溶出过程中的氢氧化钠浓度、溶出温度及时间等条件进行了试验,采用90 g/L氢氧化钠结合微波消解技术对三水铝土矿进行分解,用ICP-MS法测定有效稀土元素,有效稀土元素测定结果的相对标准偏差为0.92%~7.40%(n=7),回收率为98.6%~101.2%。该方法可用于测定三水铝土矿中有效稀土元素,能够对三水铝土矿中稀土元素的回收利用价值进行评价。     

Method validation for direct determination of some trace and toxic elements in soft drinks by inductively coupled plasma mass spectrometry

The consumption of soft drink beverages has increased in the last few years around the world and it is related to the diversity of brands and flavours available, increasing also the risk of ingestion of compounds considered non-beneficial to the health of consumers. In this study, fast, easy and simple method of analysis for direct determination of As, Pb, Cd, Sb, Hg, Cu, Zn, Fe, Al, Cr, Sn, Co, Mn and Ni in soft drink samples using quadrupole inductively coupled plasma mass spectrometry (Q-ICP–MS) was validated. The estimated detection limits, practical quantification limits, linearity (linear dynamic ranges and method linearity), accuracy (trueness and precision) and measurement uncertainty parameters were studied under optimised (Q-ICP–MS) conditions. The method showed that the estimated detection limits were varied between 0.02 and 2.403 µg/L, and the quantification limits were varied between 0.5 and 20 µg/L. The mean recoveries ± standard deviations at different spiking levels were varied between 75.03 ± 0.62% and 117.07 ± 2.83% and the coefficients of variation were varied between 0.49% and 9.79%. The method trueness was confirmed by using four different certified reference materials (soft drinks and treated water) purchased from FAPAS (Food Analysis Performance Assessment Scheme) and all obtained results were within satisfactory ranges and had acceptable recovery and Z-score values. The method precision, in terms of relative standard deviation, was below 4.88%. The method uncertainty expressed as expanded uncertainty of all validated elements was found to be ≤22.52%. The results obtained make the method suitable for accurate determination of validated elements in different kinds of soft drink samples at these low concentration values. Validated method was used for the determination of metallic contaminants in 40 commercial soft drink samples and the results were compared with the provisional guideline of the elements stated by Egyptian, WHO and European standards in drinking and potable bottled natural mineral water.     

电感耦合等离子体质谱(ICP-MS)法测定地质样品中镉、铬、钨、钽和铌

地质样品成分复杂,各元素物理化学性质差异大,在有盐酸介质存在的的情况下,敞口湿法一次消解容易出现易挥发元素Cd、Cr等测定结果不稳定;敞口湿法一次消解,难溶元素W、Ta、Nb等消解不完全。本文以HNO3—HF—HClO4—H2SO4为消解体系,用电热板湿法重复消解样品,建立起了ICP-MS同时测定地质样品种不同性质Cd、Cr、W、Ta、Nb的样品分析方法。通过优化仪器参数条件,选择带碰撞池He气模式（ked）,以50g/L酒石酸为测定介质,采用三通在线加入103Rh和185Re内标补偿基体效应和信号飘逸,解决了难溶元素W、Ta、Nb结果偏低、易挥发元素Cd、Cr结果精密度较差的问题。该方法用国家一级标准物岩石、土壤、水系沉积物质验证,相对标准偏差(RSD)小于8%,准确度(△lgC)均≤0.05,其测定值与标准值一致,用实际样品进行加标回收试验,回收率在89%～110%之间,方法检出限均小于多目标区域地球化学调查规范（DZ/T 0258—2014）。该方法分析流程较简单,结果准确可靠,可满足测定大批量地质样品中Cd、Cr、W、Ta、Nb元素含量的要求。