Preparation and characterization of new materials based on silk fibroin,chitosan and nanohydroxyapatite

Abstract

In this paper, a series of porous nanohydroxyapatite/silk fibroin/chitosan (nHA/SF/CTS) scaffolds were successfully prepared using the freeze-drying method. The biomaterials were characterized by attenuated total reflection Fourier transform infrared spectroscopy, and mechanical testing and thermogravimetric analysis. Moreover, studies of porosity, pore size, swelling properties and in vitro degradation test were performed. Research has proved that micro-structure, porosity, water adsorption and compressive strength were greatly affected by the components’ concentration, in particular the content of silk fibroin. SEM observations showed that the scaffolds of nHA/SF/CTS are highly porous, with pore size in wide range from 25 to 300?µm which is suitable for cell growth. nHA/SF/CTS scaffolds have sufficient mechanical integrity to resist handling during implantation and in vivo loading. Both, the compressive modulus and compressive strength of the scaffold, decrease with the increase in silk fibroin content.     

Preparation and in vitro degradation of porous three-dimensional silk fibroin/chitosan scaffold

Degradation behaviors of porous scaffolds play an important role in the engineering process of a new tissue. In this study, three-dimensional porous silk fibroin/chitosan (SFCS) scaffolds were successfully prepared by freeze-drying method. In vitro degradation behaviors of SFCS scaffolds have been systematically investigated up to 8 weeks in phosphate buffer saline (PBS) solution at 37 °C. The following properties of the scaffolds were measured as a function of degradation time: pore morphology, structure, weight loss, and wet/dry weight value. The pH value of the PBS solution during degradation was also detected. SFCS scaffolds maintained its porous structure till 6 weeks of degradation. During the first 2 weeks, the pH value fluctuated in a narrow range from 6.53 to 6.93. SFCS scaffolds degraded much more quickly during the first 2 weeks, and the weight loss reached 19.28 wt% after 8 weeks of degradation. The degradation process affects little SFCS scaffolds' swelling properties.     

Silk fibroin microfibers and chitosan modified poly (glycerol sebacate) composite scaffolds for skin tissue engineering

Porous mSF/PGS and CS/PGS composite scaffolds were prepared by the combination of poly(glycerol sebacate) (PGS) with silk fibroin microfibers (mSF) and chitosan (CS) as modifiers through particulate leaching and freeze-drying techniques. Both mSF/PGS and CS/PGS scaffolds show highly interconnected and open porous structures, and the crosslink density and water absorption of PGS were obviously enhanced by the modifiers. Moreover, the silk fibroin microfiber and chitosan can slow down and control the degradation rate of PGS. The biocompatibility of these porous PGS based composite scaffolds for skin tissue engineering was evaluated by cell culture experiments, and the results indicate of the good attachment, proliferation and deep penetration of cells into these composite scaffolds.     

The influence of UV radiation on silk fibroin

An investigation into the influence of UV-irradiation on regenerated silk fibroin dissolved in water was carried out using UV-Vis and fluorescence spectroscopy. It was found that the absorption of regenerated silk fibroin in solution increased during UV-irradiation of the sample, most notably between 250 and 400 nm. Moreover, after UV-irradiation a wide peak emerged between 290 and 340 nm with maximum at about 305 nm. The new peak suggests that new photoproducts are formed during UV-irradiation of regenerated silk fibroin.The fluorescence of regenerated silk fibroin was observed at 305 nm, at 480 nm and at 601 nm after excitation at 275 nm. UV-irradiation caused fluorescence fading at 305 nm and at 601 nm. The increase of fluorescence was observed at 480 nm, probably due to formation of new photoproducts. After excitation at 305 nm the fluorescence of regenerated silk fibroin was observed at 340 nm and at 400 nm. UV-irradiation caused fluorescence fading at 340 nm. FTIR spectroscopy showed that primary structure of regenerated silk fibroin was not significantly affected by UV radiation. SDS-PAGE chromatography showed alterations of molecular weight of silk after UV exposure.     

Simple preparation and characteristics of silk fibroin microsphere

We investigated the biomaterial and pharmaceutical utility of pure silk fibroin (SF) protein as a possible for separation, using Sephadex G-25 gel filtration chromatography and simply preparing SF microsphere particles (SFMP) by spray dryer. Also, some of its physicochemical properties and morphology were investigated. Obtaining microspheres and/or submicronic particles by spray dryer method was accelerated or completed with the transition from the random coil to the β-sheet structure during spray dryer treatment. It was identified by the basic Fourier transform infrared spectroscopy of SFMP. The various pH range of SFMP’s swelling ratio is dependent on the pH of the solution, not on the occurred gelation. Morphologically, SFMP was spherical in shape, and particles, average 2±10 μm in size, were observed by scanning electron microscope and particle analyzer, respectively. The average molecular weight (M_W) of pure SF protein dissolved in calcium chloride is about 61,500 g/mol as measured by gel permeation chromatography.     

Preparation and characterization of chitin whisker-reinforced silk fibroin nanocomposite sponges

For highly porous form such as sponges or scaffolds, the induction of the β-sheet formation of silk fibroin to make the water-stable materials usually results in their high shrinkage leading to a difficulty in controlling shape and size of materials. Thus, the objective of this study was to improve dimensional stability of silk fibroin sponge by incorporating chitin whiskers as nanofiller. Chitin whiskers exhibited the average length and width of 427 and 43 nm, respectively. Nanocomposite sponges at chitin whiskers to silk fibroin weight ratio (C/S ratio) of 0, 1/8, 2/8, or 4/8 were prepared by using a freeze-drying technique. The dispersion of chitin whiskers embedded in the silk fibroin matrix was found to be homogeneous. The presence of chitin whiskers embedded into silk fibroin sponge not only improved its dimensional stability but also enhanced its compression strength. Regardless of the chitin whisker content, SEM micrographs showed that all samples possessed an interconnected pore network with an average pore size of 150 μm. To investigate the feasibility of the nanocomposites for tissue engineering applications, L929 cells were seeded onto their surfaces, the results indicated that silk fibroin sponges both with and without chitin whiskers were cytocompatible. Moreover, when compared to the neat silk fibroin sponge, the incorporation of chitin whiskers into the silk fibroin matrix was found to promote cell spreading.     

In vitro and in vivo degradation behavior of aqueous-derived electrospun silk fibroin scaffolds

We investigated the in vitro degradation behavior of the electrospun silk fibroin (SF) scaffolds by protease XIV. Phosphate-buffered saline (PBS) without enzyme was used as a control. About 65% of the electrospun SF scaffolds were degraded within 24 d in protease XIV, while almost no scaffolds were degraded in PBS. A great deal of fragments was visible in protease XIV solution. SEM indicated surface erosion of the scaffolds increased during protease degradation with increasing exposure time. FTIR and XRD indicated the crystalline structure of the scaffolds decreased after protease degradation for 24 d, and a degradation mechanism was proposed. Furthermore, the results of the in vivo degradation by implantation in rats showed that the scaffolds were completely degraded in vivo after implantation for 8 weeks and well tolerated by the host animals. The insights gained in this study can serve as a guide to match desired degradation behavior with specific applications for the electrospun SF scaffolds, such as tissue engineering and drug delivery.     

Synthesis,characterization, and biological evaluation of doxorubicin containing silk fibroin micro- and nanoparticles

The aim of this study was biological evaluation of doxorubicin containing silk fibroin micro- and nanoparticles (Dox-MF and Dox-NF). Dox-MF and Dox-NF were synthesized. Cell toxicity on MCF-7, Saos2, and HFF cells was assessed using MTT assay. Induced apoptosis was assessed using flow cytometry and staining with PI/annexin V. Production of reactive oxygen species (ROS) was measured. Gene expression of p53 was evaluated by real-time PCR. FTIR, SEM, and DLS confirmed the accurate synthesis. Cytotoxicity of Dox-MF and Dox-NF showed significant inhibition of cell growth compared with the controls. Regarding Dox-NF, a significant increase was seen in mRNA level of P53 in MCF-7 and SAOS-2 ​cells and a significant decrease in HFF cells compared to the controls. There was a significantly higher expression of P53 gene in MCF-7 and HFF cells treated by Dox-MF. However, a significant decrease in P53 gene expression was detected in SAOS-2 ​cells. Significant apoptotic induction of cell lines by Dox-MF and Dox-NF was observed in both early and late stages. Dox-MF and Dox-NF acted in the direction of cell death through the apoptotic pathway and changing p53 gene expression. So, Dox-MF and Dox-NF can be considered as a candidate for new anticancer agents.     

Surface properties of silk fibroin films and their interaction with fibroblasts

There is a growing interest in the use of silk as a biomaterial for tissue engineering. Silk threads from Bombyx mori have a fibrous core of fibroin, the protein responsible for biocompatibility and bioactivity, which is surrounded by a family of "gummy" proteins, called sericins, which are almost completely removed during silk degumming. Three different methanol treatments on regenerated fibroin films were used to convert viscous solutions of Silk I to an insoluble crystalline form (Silk II), in an attempt to devise new processing protocols for the creation of a cell guiding fibroin surface. Human fibroblasts (MRC5 line) were used as probes of the cell-biomaterial interaction in the early stages of the process (1 h, 3 h, 6 h and 4 d after seeding). The effect of each treatment on cell adhesion, spreading and distribution was monitored by scanning electron microscopy (SEM) and was correlated to superficial properties (like roughness and crystallinity) and fibroin conformation by means of atomic force microscopy (AFM), used in both topographical and acoustic mode, and attenuated total internal reflection infrared spectroscopy (FTIR-ATR). It was found that traditional methanol treatments where fibroin films were soaked in methanol solution produced roughness patterns that affected only the very early stages of fibroblast adhesion (until 3 h from seeding), while the new treatment proposed could really dialogue with the cells. Its non-homogeneous surface can explain the existence of cells spreading in specific directions and the presence of cell repellent areas even 4 d after seeding.     

Physical and chemical properties of tussah silk fibroin films

Physical and chemical structure, as well as thermal behavior of solution-cast regenerated films, prepared from tussah (Antheraea pernyi) silk fibroin, were compared with those of solution-cast native films, in order to ascertain whether treatment (degumming, dissolution) used for preparation affected their properties. Regenerated fibroin films exhibited a higher thermal stability than native ones, as shown by differential scanning calorimetry, thermomechanical analysis, and dynamic mechanical behavior. Glass transition temperature and other relevant thermal transitions of the regenerated silk specimen shifted to higher temperatures compared with those of native specimen. Molecular conformation and crystalline structure did not show significant differences between the two kinds of silk films. Amino acid composition and molecular weight, however, distribution changed markedly after dissolving tussah silk fibroin fiber in concentrated LiSCN in polypeptide size was the main features for the regenerated silk fibroin. © 1994 John Wiley & Sons, Inc.     

Thermal properties and phase transitions in blends of Nylon-6 with silk fibroin

The thermal and structural properties of binary blends of Nylon-6 (N6) and a chemically related biopolymer, Bombyx mori silk fibroin (SF), are reported in this work. Homopolymers and blends, in composition ratios of N6/SF ranging from 95/05 to 70/30, were investigated by thermogravimetric (TG) analysis, differential scanning calorimetry (DSC), Fourier transform infrared (FTIR) spectroscopy and wide angle X-ray scattering (WAXS). Silk fibroin typically degrades at temperatures just above 210°C, which occurs within the melting endotherm of N6. In TG studies, the measured mass remaining was slightly greater than expected, indicating the blends had improved thermal stability. No beta sheet crystals of SF were detected by FTIR analysis of the Amide I region. Strong interaction between N6 and SF chains was observed, possibly as a result of formation of hydrogen bonds between N6 and SF chains. DSC analysis showed that the addition of SF to N6 caused a decrease in the crystallization temperature, the melting temperature of the lowest melting crystals and the crystallinity of N6. Furthermore, the α-crystallographic phase dominates and the γ-crystallographic phase was not observed in N6/SF blends, in contrast to the homopolymer N6, which contains both phases. We suggest that the addition of SF might result in changes of the chain extension of N6, which lead to the appearance of α-rather than γ-phase crystals.     

Cecropin B抗菌肽接枝丝素蛋白膜的制备和表征

以体积分数为60%的乙醇处理制得不溶性再生丝素膜, 通过碳二亚胺法将Cecropin B抗菌肽共价接枝到丝素膜表面, 利用红外光谱、扫描电镜、X射线能谱和抗菌性测试等手段对制得的丝素膜结构和表面特性及其抗菌性能进行了测试分析. 结果表明, Cecropin B抗菌肽成功地接枝到了丝素膜的表面, 接枝后的丝素膜水溶性低, 并具有良好、 持久的抗菌能力.     

Diethylmethyl chitosan as an antimicrobial agent: Synthesis, characterization and antibacterial effects

Chitosan with excellent biodegradable and biocompatible characteristics has received attention as an oral drug delivery vehicle. A quaternized chitosan (i.e., N-diethylmethyl chitosan, DEMC) was prepared based on a modified two-step process via a 2² factorial design to optimize the preparative conditions. DEMC was fully characterized using FTIR and ¹H-NMR spectroscopies. As calculated using NMR-based data, high degree of quaternization was achieved through the optimized two-step process. The highly quaternized biopolymeric derivative was subjected to microbial experiments. The antimicrobial activities of chitosan and DEMC against Escherchia coli were compared by calculation of minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC). Our data indicates that although the antimicrobial activity of DEMC is higher than that of chitosan in acetic acid medium, the both compounds are pH dependent and an increase in concentration of acetic acid results in a significant decrease in both MIC and MBC.     

Degradation behaviors of nerve guidance conduits made up of silk fibroin in vitro and in vivo

We have developed a new design of nerve guidance conduits (NGCs) made up of silk fibroin (SF), referred to as SF-NGCs, by a well-established method. The present study aimed to comprehensively investigate the degradation behaviors of SF-NGCs versus SF fibers. After they were allowed to incubate in the protease XIV solution or to be subcutaneously implanted in rabbits, SF-NGCs and SF fibers were subjected to degradation level measurement, mass loss assessment and gel electrophoresis, or light and electron microscopy and mass loss assessment for testing the dynamic course of in vitro or in vivo degradation. The results collectively indicated that SF-NGCs were able to degrade at a significantly increasing rate as compared to SF fibers, thus meeting the requirements of peripheral nerve regeneration. Furthermore, based on the possible involvement pathway in the in vivo degradation of SF-NGCs, the time-dependent changes in the mRNA level of lysosome-related genes (Hip1R, cathepsin D, and tPA) in subcutaneous implantation site within 24-week period post-implantation was determined by real-time RT-PCR, and the resulting data might contribute to our understanding of the molecular aspects that affect in vivo degradation and absorption of SF-NGCs.     

丝素膜修饰电极pH电荷选择效应的研究

研究了丝素膜的带电特性,其等电点在pH4.5附近,利用丝系膜在等电点前后的两性荷电特性和电荷之间的静电作用,研制了丝素膜修饰石墨电极,多巴胺在膜中的表观扩散系数为2.65×10^-7cm^2/s,其电极反应异相电子转移速率常数为8.9×10^-6cm/s,电极用于神经递质类化合物体系的测定中,验证了此修饰电极的pH电荷选择效应。     

Fabrication of silk fibroin film with properties of thermal insulation and temperature monitoring

Silk fibroin exhibits excellent mechanical properties, good biocompatibility, and biodegradability combined with benign processing conditions, attracting considerable research interest for the application as biomedical materials. Among the diverse forms of sponges, hydrogels, films, and mats manufactured from silk fibroin, films are especially appealing due to the high water and oxygen permeability, good cell attachment, and low immunogenicity. Fabrication of silk fibroin films with novel properties has been successfully developed simply by incorporating various functional components into it. In the present study, the properties of thermal insulation and temperature monitoring for the silk fibroin film are demonstrated for the first time through the incorporation of thermochromic microcapsules within it. Moreover, the silk fibroin film is also endowed with improved mechanical properties in terms of tension strength and elongation at break because of the reinforcing effect of thermochromic microcapsules. The silk fibroin film fabricated with novel features in this study can be a good candidate for the application of wound dressings, tissue engineering scaffolds, and bio‐related devices in the future. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1846–1852     

Preparation and characterization of novel silk fibroin/2-(N,N-dimethylamino)ethyl methacrylate based composite hydrogels with enhanced mechanical properties for controlled release of cefixime

Hydrogels with improved mechanical properties have been particularly attractive for their applications in the biomedical area including wound healing. For this purpose, a series of novel composite hydrogels based on silk fibroin (SF) and 2-(N,N-dimethylamino) ethyl methacrylate (DMAEMA) were fabricated. The swelling and mechanical tests indicated that an optimum design of hydrogel was essential to provide a high degree of water uptake, higher tensile strength and elongation at break values. Here, the S40D60 was exhibited superior swelling and strong mechanical characteristics than all the other hydrogels with different compositions. Furthermore, it was observed that the cefixime was released from the formulation of S40D60 in a sustainable manner and the drug release rate can be controlled by pH of the dissolution medium. According to these findings, it is suggested that the optimal formulation of S40D60 would be effectively performed in situ drug therapy for wound healing.     

Study on porous silk fibroin materials: 3. Influence of repeated freeze–thawing on the structure and properties of porous silk fibroin materials

The influence of repeated freeze–thawing on pore structural characteristics and physical properties of porous silk fibroin materials prepared by freeze drying were studied. It showed that when quick‐frozen silk fibroin solution was repeatedly thawed and frozen before being vacuum dried, thus pore size of prepared porous silk fibroin materials increased from 67 µm to about 120 µm, and pore density decreased from 80 per square millimeter to about 28 per square millimeter; at the same time compression ratio and moisture permeability increased from 22.7% and 230 g/m² hr to about 33.7% and 308 g/m² hr, respectively, tensile strength and dissolvability in hot water decreased from 20.2 N/cm² and 42.7% to about 12.5 N/cm² and 26.1%, respectively. Both the times of repeated thawing and the thawing temperature had a certain influence on the above‐mentioned pore characteristic parameters and physical properties. Copyright © 2001 John Wiley & Sons, Ltd.     

Improved biosensor for glucose based on glucose oxidase-immobilized silk fibroin membrane

Based on glucose oxidase-immobilized silk fibroin membrane and oxygen electrode, the authors have developed an amperometric glucose sensor in flow-injection analysis. After the sensor was improved by the configuration of oxygen electrode and a temperature control system was added to the electrode body, its sensitivity, analytical precision, and stability were enhanced greatly. The authors first introduced a tailing inhibitor-ion pair reagent into a buffer system in the biosensor so as to eliminate all interference from hemacyte, macromolecules, and small mol wt charged species besides electroactive specie ascorbate in complex matrices. A considerably serious tailing of the biosamples, such as whole blood, plasma, serum, or urine on the sensor, based on enzyme electrode, entirely disappeared, their response times were shortened, and base lines became more smooth and stable. The glucose sensor has a broad range of linear response for glucose (up to 25.0 mmol/L) and a good correlation (γ = 0.999) under conditions of control temperature 32.0°C and 1.6 mL/min 0.02 mol/L phosphate buffer containing 0.5% tailing inhibitor (v/v). Recoveries of glucose in these biosamples are within the range of 93.71–105.88%, and its repeatabilities for determining glucose, repeated 100 times, human blood dilution 125 times, and serum 128 times, are 1.81,2.48, and 2.91% (RSD), respectively. The correlation analysis for 200 serum samples showed that the correlation (γ) is 0.9934 between the glucose sensor and Worthington method for determining serum glucose used conventionally in a hospital laboratory. Moreover, the enzyme membrane used in the biosensor can be stored for a long time (over 2 yr) and measured repeatedly over 1000 times for biosamples. The glucose sensor is capable of detecting over 60 biosamples/hr.     

Physical characteristics and properties of waterborne polyurethane materials reinforced with silk fibroin powder

Degummed silk filament was pulverized with a home‐made machine to obtain silk fibroin (SF) powder, and the structure, morphology, and particle size of the SF powder were investigated. The individual spherical particles and aggregates with different morphology of silk fibroin coexisted in water. A waterborne polyurethane (WPU) aqueous dispersion was blended with the SF powder to prepare novel blended materials with improved physical properties. The average particle size and zeta potential of the WPU/SF aqueous dispersions were characterized. The result showed that the WPU/SF dispersion with higher SF content exhibited a less negative zeta potential and a larger average particle size. Furthermore, the effect of SF content on the morphology, miscibility, and mechanical properties of the resulting blended films was studied by scanning electron microscopy, wide‐angle X‐ray diffraction, dynamic mechanical thermal analysis, and tensile testing. The films showed an improved Young's modulus and tensile strength from 0.3 to 33.8 MPa, and 0.6 to 5.2 MPa, respectively, with the increasing of SF up to a content of 26 wt %. The negative charges in the periphery and the small particle size made a good effort on dispersing SF powder into the WPU matrix as small aggregates, and the SF powder led to the efficient strengthening of WPU materials. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 940–950, 2010