Thermal and electrochemical C-X activation (X = Cl,Br, I) by the strong Lewis acid Pd3(dppm)3(CO)2+ cluster and its catalytic applications

The stoichiometric and catalytic activations of alkyl halides and acid chlorides by the unsatured Pd(3)(dppm)(3)(CO)(2+) cluster (Pd(3)(2+)) are investigated in detail. A series of alkyl halides (R-X; R = t-Bu, Et, Pr, Bu, allyl; X = Cl, Br, I) react slowly with Pd(3)(2+) to form the corresponding Pd(3)(X)(+) adduct and "R(+)". This activation can proceed much faster if it is electrochemically induced via the formation of the paramagnetic species Pd(3)(+). The latter is the first confidently identified paramagnetic Pd cluster. The kinetic constants extracted from the evolution of the UV-vis spectra for the thermal activation, as well as the amount of electricity to bring the activation to completion for the electrochemically induced reactions, correlate the relative C-X bond strength and the steric factors. The highly reactive "R(+)" species has been trapped using phenol to afford the corresponding ether. On the other hand, the acid chlorides react rapidly with Pd(3)(2+) where no induction is necessary. The analysis of the cyclic voltammograms (CV) establishes that a dissociative mechanism operates (RCOCl --> RCO(+) + Cl(-); R = t-Bu, Ph) prior to Cl(-) scavenging by the Pd(3)(2+) species. For the other acid chlorides (R = n-C(6)H(13), Me(2)CH, Et, Me, Pr), a second associative process (Pd(3)(2+) + RCOCl --> Pd(3)(2+.....)Cl(CO)(R)) is seen. Addition of Cu(NCMe)(4)(+) or Ag(+) leads to the abstraction of Cl(-) from Pd(3)(Cl)(+) to form Pd(3)(2+) and the insoluble MCl materials (M = Cu, Ag) allowing to regenerate the starting unsaturated cluster, where the precipitation of MX drives the reaction. By using a copper anode, the quasi-quantitative catalytic generation of the acylium ion ("RCO(+)") operates cleanly and rapidly. The trapping of "RCO(+)" with PF(6)(-) or BF(4)(-) leads to the corresponding acid fluorides and, with an alcohol (R'OH), to the corresponding ester catalytically, under mild conditions. Attempts were made to trap the key intermediates "Pd(3)(Cl)(+)...M(+)" (M(+) = Cu(+), Ag(+)), which was successfully performed for Pd(3)(ClAg)(2+), as characterized by (31)P NMR, IR, and FAB mass spectrometry. During the course of this investigation, the rare case of PF(6)(-) hydrolysis has been observed, where the product PF(2)O(2)(-) anion is observed in the complex Pd(3)(PF(2)O(2))(+), where the substrate is well-located inside the cavity formed by the dppm-Ph groups above the unsatured face of the Pd(3)(2+) center. This work shows that Pd(3)(2+) is a stronger Lewis acid in CH(2)Cl(2) and THF than AlCl(3), Ag(+), Cu(+), and Tl(+).     

Chemical properties of the Pd4(dppm)4(H)2(2+) cluster and the homogeneous electrocatalytical behavior of hydrogen evolution and formate decomposition

Two new reductive electrochemical (CO2 + H2O + 2e-; HCO2H + 2e-) and two new chemical methods (Al(CH3)3 + proton donor; NaO2CH) to prepare the title compound from Pd2(dppm)2Cl2 are reported. For the latter method, an intermediate species formulated as Pd2(dppm)4(O2CH)2(2+) is identified spectroscopically (1H NMR, 31P NMR, IR, and FAB-MS). Limited stability of the title compound in the presence of Cl- and Br- as counteranions is noticed and is due to sensitivity of the cluster toward nucleophilic attack of the halide ions. This result is corroborated by the rapid decomposition of these clusters in the presence of CN- to form the binuclear species Pd2(dppm)2(CN)4 and by the preparation of the stable salts [Pd4(dppm)4(H)2](X)2(X- = BF4-, PF6-, BPh4-). Upon a two-electron electrochemical reduction of this cluster to the neutral species (E1/2 = -1.42 V vs SCE in DMF) in the presence of 1 equiv of HCO2H, a highly reactive species formulated as [Pd4(dppm)4(H)3]+ is generated and characterized by 1H NMR, 31P NMR, and cyclic voltammetry. Subsequent addition of H+ (via RCO2H; R = H, CH3, CF3, C6H5) under the same reducing conditions, induces the homogeneous catalysis of H2 evolution. The turnover number is found to be 134 in 2 h, with no evidence for catalyst decomposition. This same species also exhibits a one-electron oxidation process (E1/2 = -0.61 V vs SCE in DMF) that induces the catalytical decomposition of formate (HCO2- --> CO2 + 1/2H2 + 1e-). This double catalysis from the same cluster intermediate is unprecedented.     

Novel access to carbodiphosphoranes in the coordination sphere of group 10 metals: template synthesis and protonation of PCP pincer carbodiphosphorane complexes of C(dppm)2

In a novel template synthesis of carbodiphosphoranes (CDPs), the phosphine functionalized CDP ligand C(dppm)(2) (dppm = Ph(2)PCH(2)PPh(2)) is formed in the coordination sphere of group 10 metals from CS(2) and 4 equivalents of dppm. The products are the PCP pincer complexes [M(Cl)(C(dppm)(2)-κ3P,C,P)]Cl (M = Ni, Pd, Pt) and 2 equivalents of dppmS. The compound C(dppm)(2), which is composed of a divalent carbon atom and two dppm subunits, represents a new PCP-type pincer ligand with the formally neutral carbon Lewis base of the CDP functionality as the central carbon. Treatment of [M(Cl)(C(dppm)(2)-κ3P,C,P)]Cl (M = Pd, Pt) with hydrochloric acid results in protonation at the CDP carbon atom and the formation of the PCP pincer complexes [M(Cl)(CH(dppm)(2)-κ3P,C,P)]Cl(2) (M = Pd, Pt). The PCP pincer ligand [CH(dppm)(2)](+) involves a formally cationic central carbon donor. The reaction of [Ni(Cl)(C(dppm)(2)-κ3P,C,P)]Cl with HCl leads to the extrusion of NiCl(2) and formation of the diprotonated CDP compound [CH(2)(dppm)(2)]Cl(2), from which the monoprotonated conjugate base [CH(dppm)(2)]Cl is obtained upon addition of bases, such as NH(3). The crystal structures of [M(Cl)(C(dppm)(2)-κ3P,C,P)]Cl (M = Ni, Pd, Pt), [Ni(Cl)(C(dppm)(2)-κ3P,C,P)](2)[NiCl(4)], [M(Cl)(CH(dppm)(2)-κ3P,C,P)]Cl(2) (M = Pd, Pt) as well as [CH(2)(dppm)(2)]Cl(2) and [CH(dppm)(2)]Cl are presented. A comparison of the solid state structures reveals interesting features, e.g. infinite supramolecular networks mediated by C-H···Cl hydrogen bond interactions and an unexpected loss of molecular symmetry upon protonation in the complexes [M(CH(dppm)(2)-κ3P,C,P)(Cl)]Cl(2) (M = Pd, Pt) as a result of the flexible ligand backbone. Additionally the new compounds were characterized comprehensively in solution by multinuclear (31)P, (13)C and (1)H NMR spectroscopy: Several spectroscopic parameters show a striking variability in particular regarding the carbodiphosphorane functionality. Furthermore the compound [Ni(Cl)(C(dppm)(2)-κ3P,C,P)]Cl was examined by cyclic voltammetry (CV) and could be shown to display quasi-reversible oxidative as well as reductive behaviour.     

Electrochemical Dissociative Oxidation of the Unsaturated Pd3(dppm)3(CO)2+ Cluster; An Astonishing Resemblance with the Photo-Oxidative Analogue

Cyclic voltammetry (CV), rotating disk electrode voltammetry (RDE) and bulk electrolysis were used to investigate the electrochemical oxidation of the title cluster in acetonitrile (CH₃CN). Two irreversible 2-electron oxidation processes occur at +0.95 V and +1.15 V vs. SCE. Bulk electrolysis demonstrates that the d⁹–d⁹ Pd₂(dppm)₂(NCCH₃) ₂ ²⁺ 4 complex is generated among the first intermediates, and the d⁸ Pd(dppm)(NCCH₃) ₂ ²⁺ 3 is formed as the final product. The intermediacy of “Pd₃(dppm)₃(CO)⁴⁺” and “Pd₃(dppm) ₃ ⁴⁺ ” is suspected but not confirmed. This oxidation process exhibits a close resemblance to the photo oxidative reactivity of the title cluster in the presence of chlorocarbons (R–Cl) for which the sole observed product is Pd(dppm)Cl₂.This paper is dedicated to Professor Brian Johnson on the occasion of his retirement.     

Thermal and electrochemically assisted Pd-Cl bond cleavage in the d9-d9 Pd2dppm2Cl2 complex by Pd3 dppm3COn+ clusters (n = 2, 1, 0)

A new aspect of reactivity of the cluster [Pd3(dppm)3(micro3-CO)]n+, ([Pd3]n+, n = 2, 1, 0) with the low-valent metal-metal-bonded Pd2(dppm)2Cl2 dimer (Pd2Cl2) was observed using electrochemical techniques. The direct reaction between [Pd3]2+ and Pd2Cl2 in THF at room temperature leads to the known [Pd3(dppm)3(micro3-CO)(Cl)]+ ([Pd3(Cl)]+) adduct and the monocationic species Pd2(dppm)2Cl+ (very likely as Pd2(dppm)2(Cl)(THF)+, [Pd2Cl]+) as unambiguously demonstrated by UV-vis and 31P NMR spectroscopy. In this case, [Pd3]2+ acts as a strong Lewis acid toward the labile Cl- ion, which weakly dissociates from Pd2Cl2 (i.e., dissociative mechanism). Host-guest interactions between [Pd3]2+ and Pd2Cl2 seem unlikely on the basis of computer modeling because of the strong screening of the Pd-Cl fragment by the Ph-dppm groups in Pd2Cl2. The electrogenerated clusters [Pd3]+ and [Pd3]0 also react with Pd2Cl2 to unexpectedly form the same oxidized adduct, [Pd3(Cl)]+, despite the known very low affinity of [Pd3]+ and [Pd3]0 toward Cl- ions. The reduced biproduct in this case is the highly reactive zerovalent species "Pd2(dppm)2" or "Pd(dppm)" as demonstrated by quenching with CDCl3 (forming the well-known complex Pd(dppm)Cl2) or in presence of dppm (forming the known Pd2(dppm)3 d10-d10 dimer). To bring these halide-electron exchange reactions to completion for [Pd3]+ and [Pd3]0, 0.5 and 1.0 equiv of Pd2Cl2 are necessary, respectively, accounting perfectly for the number of exchanged electrons. The presence of a partial dissociation of Pd2Cl2 into the Cl- ion and the monocation [Pd2Cl]+, which is easier to reduce than Pd2Cl2, is suggested to explain the overall electrochemical results. It is possible to regulate the nature of the species formed from Pd2Cl2 by changing the state of charge of the title cluster.     

Generation, characterization, and electrochemical behavior of the palladium-hydride cluster [Pd3(dppm)3(mu3-CO)(mu3-H)]+ (dppm=Bis(diphenylphosphinomethane)

Addition of formate on the dicationic cluster [Pd(3)(dppm)(3)(mu(3)-CO)](2+) (dppm=bis(diphenylphosphinomethane) affords quantitatively the hydride cluster [Pd(3)(dppm)(3)(mu(3)-CO)(mu(3)-H)](+). This new palladium-hydride cluster has been characterised by (1)H NMR, (31)P NMR and UV/Vis spectroscopy and MALDI-TOF mass spectrometry. The unambiguous identification of the capping hydride was made from (2)H NMR spectroscopy by using DCO(2) (-) as starting material. The mechanism of the hydride complex formation was investigated by UV/Vis stopped-flow methods. The kinetic data are consistent with a two-step process involving: 1) host-guest interactions between HCO(2) (-) and [Pd(3)(dppm)(3)(mu(3)-CO)](2+) and 2) a reductive elimination of CO(2). Two alternatives routes to the hydride complex were also examined : 1) hydride transfer from NaBH(4) to [Pd(3)(dppm)(3)(mu(3)-CO)](2+) and 2) electrochemical reduction of [Pd(3)(dppm)(3)(mu(3)-CO)](2+) to [Pd(3)(dppm)(3)(mu(3)-CO)](0) followed by an addition of one equivalent of H(+). Based on cyclic voltammetry, evidence for a dual mechanism (ECE and EEC; E=electrochemical (one-electron transfer), C=chemical (hydride dissociation)) for the two-electron reduction of [Pd(3)(dppm)(3)(mu(3)-CO)(mu(3)-H)](+) to [Pd(3)(dppm)(3)(mu(3)-CO)](0) is provided, corroborated by digital simulation of the experimental results. Geometry optimisations of the [Pd(3)(H(2)PCH(2)PH(2))(3)(mu(3)-CO)(mu(3)-H)](n) model clusters were performed by using DFT at the B3 LYP level. Upon one-electron reductions, the Pd--Pd distance increases from a formal single bond (n=+1), to partially bonding (n=0), to weak metal-metal interactions (n=-1), while the Pd--H bond length remains relatively the same.     

Stepwise assembly of linearly-aligned Ru-M-Ru (M = Pd, Pt) heterotrimetallic complexes with sigma-4-ethynylpyridine spacer

Two heterotrinuclear oligomeric complexes [trans-RuCl(C[triple bond, length as m-dash]Cpy-4)(dppm)(2)](2)[MCl(2)] (M = Pd ; M = Pt ) are prepared from the metalloligand trans-[RuCl(C[triple bond, length as m-dash]Cpy-4)(dppm)(2)] (dppm = Ph(2)PCH(2)PPh(2), ). The resultant linear alignment of the metals [Ru-M-Ru] is imposed by a combinative use of trans-directed spacers and planar metals with trans-juxtaposed donor sites. Ligand exchange of with [Pd(CH(3)CN)(4)][PF(6)](2) gives trans-[Ru(CH(3)CN)(C[triple bond, length as m-dash]Cpy-4)(dppm)(2)][PF(6)] (). All complexes are characterized by single-crystal X-ray crystallography and solution spectroscopy. Acid-base titration on suggested protonation of the pendant pyridyl. Complexes and also undergo protonation at the C[triple bond, length as m-dash]C moiety under acid conditions. The inter-conversion of alkynyl and vinylidene functionality is described. The dual acid and base characters of makes it a potential metalloligand towards basic and acidic fragments in multinuclear heterometallic assemblies.     

Triazenide-bridged rhodium-palladium complexes: [I2Rh(mu-p-MeC6H4NNNC6H4Me-p)2Pd(eta(3)-C3H5)]-, a stable paramagnetic [RhPd]4+ species with a localised Rh(II) centre

Deprotonation of mixtures of the triazene complexes [RhCl(CO)2(p-MeC6H4NNNHC6H4Me-p)] and [PdCl(eta(3)-C3H5)(p-MeC6H4NNNHC6H4Me-p)] or [PdCl2(PPh3)(p-MeC6H4NNNHC6H4Me-p)] with NEt3 gives the structurally characterised heterobinuclear triazenide-bridged species [(OC)2Rh(mu-p-MeC6H4NNNC6H4Me-p)2PdLL'] {LL' = eta(3)-C3H5 1 or Cl(PPh3) 2} which, in the presence of Me3NO, react with [NBu(n)4]I, [NBu(n)4]Br, [PPN]Cl or [NBu(n)4]NCS to give [(OC)XRh(mu-p-MeC6H4NNNC6H4Me-p)2PdCl(PPh3)]- (X = I 3-, Br 4-, Cl 5- or NCS 6-) and [NBu(n)4][(OC)XRh(mu-p-MeC6H4NNNC6H4Me-p)2Pd(eta(3)-C3H5)], (X = I 7- or Br 8-). The allyl complexes 7- and 8- undergo one-electron oxidation to the corresponding unstable neutral complexes 7 and 8 but, in the presence of the appropriate halide, oxidative substitution results in the stable paramagnetic complexes [NBu(n)4][X2Rh(mu-p-MeC6H4NNNC6H4Me-p)2Pd(eta(3)-C3H5)], (X = I 9- or Br 10-). X-Ray structural (9-), DFT and EPR spectroscopic studies are consistent with the unpaired electron of 9- and 10- localised primarily on the Rh(II) centre of the [RhPd]4+ core, which is susceptible to oxygen coordination at low temperature to give Rh(III)-bound superoxide.     

Triplet energy transfers in electrostatic host-guest assemblies of unsaturated organometallic cluster cations and carboxylate-containing porphyrin pigments

The unsaturated cyclic [M3(dppm)3(CO)](2+) clusters (M = Pt, Pd; dppm = Ph2PCH2PPh2; such as PF6(-) salt) exhibit a cavity formed by the six dppm-phenyl groups placed like a picket fence above the unsaturated triangular M3 dicationic center. Electrostatic interactions of the M(3+) units inside this cavity with the carboxylate anion RCO2(-) [R = tetraphenylporphyrinatozinc(II), ZnTPP; p-phenyltritolylporphyrinatozinc(II), ZnTTPP; p-phenyltritolylporphyrinatopalladium(II), PdTTPP] form dyads for through-space triplet energy transfers. The binding constants are on the order of 20,000 M(-1) in all six cases (298 K). The energy diagram built upon absorption and emission spectra at 298 and 77 K places the [Pt3(dppm)3(CO)](2+) and [Pd3(dppm)3(CO)](2+) as triplet energy donors, respectively, with respect to the ZnTPPCO2(-), ZnTTPPCO2(-), and PdTTPPCO2(-) pigments, which act as acceptors. Evidence for energy transfer is provided by the transient absorption spectra at 298 K, where triplet-triplet absorption bands of the metalloporphyrin chromophores are depicted at all time (at 298 K) with total absence of the charge-separated state in the nanosecond to microsecond time scale. Rates for energy transfer (ranging in the 10(4) s(-1) time scale) are extracted from the emission lifetimes of the [Pt3(dppm)3(CO)](2+) donor in the free chromophore and the host-guest assemblies. The emission intensity of [Pd3(dppm)3(CO)](2+) is too weak to measure its spectrum and emission lifetime in the presence of the strongly luminescent metalloporphyrin-containing materials. For the [Pd3(dppm)3(CO)](2+)...metalloporphyrin dyads, evidence for fluorescence and phosphorescence lifetime quenching of the porphyrin chromophore at 298 K is provided. These quenchings, exhibiting rates of 10(4) (triplet) and 10(8) s(-1) (singlet), are attributed to a photoinduced electron transfer from the metalloporphyrin to the cluster due to the low reduction potential.     

Electrochemical preparation of the bis(ruthenocenium) dication

The electrochemical oxidation of ruthenocene (1) in CH(2)Cl(2)/[NBu(4)]A, where A = [B(C(6)F(5))(4)](-) or [B(C(6)H(3)(CF(3))(2))(4)](-), gives the dimeric dication [(RuCp(2))(2)](2+), 2(2+), in equilibrium with the 17-electron ruthenocenium ion 1(+). At room temperature the rapid equilibrium accounts for the quasi-Nernstian cyclic voltammetry (CV) behavior (E(1/2) = 0.41 V vs FeCp(2), A = [B(C(6)F(5))(4)](-)). Direct electrochemical evidence for 2(2+) is seen by CV and by bulk electrolysis at 243 K. The bis(ruthenocenium) dication undergoes a highly irreversible two-electron cathodic reaction at E(pc) ca. 0 V. Anodic electrolysis of 1 at 243 K using [B(C(6)H(3)(CF(3))(2))(4)](-) as the supporting electrolyte, followed by cathodic electrolysis of 2(2+), regenerates half of the original 1. Precipitation of 2(2+) occurs when the supporting electrolyte is [B(C(6)F(5))(4)](-), allowing facile isolation of [(RuCp(2))(2)][B(C(6)F(5))(4)](2). A second, unidentified, anodic product also reduces to give back ruthenocene. Digital simulations of the CV curves of 1 at 243 K give a dimerization equilibrium constant of 9 x 10(4) M(-1) for K(eq) = [(RuCp(2))(2)(2+)]/2 [RuCp(2)](+) in CH(2)Cl(2)/0.1 M [NBu(4)][B(C(6)F(5))(4)].     

Synthesis of the novel [W3PdS4H3(dmpe)3(CO)]+ cubane cluster and kinetic studies on the substitution of coordinated hydrides in acidic media

Reaction of the incomplete cuboidal [W3S4H3(dmpe)3]+ cluster with a Pd(0) complex under a CO atmosphere produces a rare example of a heterodimetallic hydrido cluster of formula [W3PdS4H3(dmpe)3(CO)]+ ([1]+). There are not significant changes in the W-W bond lengths on going from the trinuclear to the tetranuclear cluster. The average W-W and W-Pd bond distances of 2.769[10] and 2.90[2] A, respectively, are consistent with the presence of single bonds between metal atoms. The heterodimetallic [1]+ complex is easier to oxidize and more difficult to reduce than its trinuclear precursor, which reflects the electron-donating capability of the Pd(CO) fragment. However, mechanistic studies on the reaction of [1]+ with acids show a lower basicity for this complex in comparison with that of its trinuclear precursor, so there is a major electron-density rearrangement within the cluster core upon Pd(CO) coordination. This rearrangement is also reflected in an unusual expansion of the sulfur tetrahedron within the W3PdS4 core with the concomitant elongation of the W-S bond distances by 0.04 A with respect to the analogous bond lengths in the trinuclear precursor. For those thermodynamically favored proton-transfer processes, the reaction mechanism of [1]+ with acids is quite similar to that observed for the incomplete trinuclear cluster, with only small changes in the rate constants. The reaction of [1]+ with HCl in acetonitrile/water mixtures produces [W3PdS4Cl3(dmpe)3(CO)]+ ([2]+) in two kinetically distinguishable steps. Proton transfer occurs in the initial step, in which the W-H bonds are attacked by the acid to yield dihydrogen-bonded adducts that are further attacked by an acetonitrile molecule to give [W3PdS4(CH3CN)3(dmpe)3(CO)]4+ and dihydrogen. The nature of processes involved in the second step are not well-understood with the present data, although it is very likely that these correspond to some secondary processes. In the third resolved step, the coordinated CH3CN ligands in [W3PdS4(CH3CN)3(dmpe)3(CO)]4+ are substituted by Cl- to afford the final [2]+ product. No reaction is observed between [1]+ and HCl in neat acetonitrile, whereas the product of the reaction of [1]+ with HBF4 or Hpts (pts- = p-toluenesulfonate) in this solvent is [W3PdS4(CH3CN)3(dmpe)3(CO)]4+. The reaction occurs in a single kinetic step with a first- (Hpts) or second-order (HBF4) dependence with respect to the acid. The first- and second-order acid dependences can be interpreted through the initial formation of dihydrogen adducts with one or two acid molecules, respectively.     

Characterization and reactions of previously elusive 17-electron cations: electrochemical oxidations of (C(6)H(6))Cr(CO)(3) and (C(5)H(5))Co(CO)(2) in the presence of [B(C(6)F(5))(4)](-)

The electrochemical oxidations of (C6H6)Cr(CO)3, 1, and (C5H5)Co(CO)2, 2, when carried out in CH2Cl2/[NBu4][B(C6F5)4], allow the physical or chemical characterization of the 17-electron cations 1+ and 2+ at room temperature. The generation of 1+ on a synthetic time scale permits an electrochemical "switch" process involving facile substitution of CO by PPh3 as a route to (C6H6)Cr(CO)2PPh3. The radical 2+ undergoes a second-order reaction to give a product assigned as the metal-metal bonded dimer dication [Cp2Co2(CO)4]2+. The new anodic chemistry of these often-studied 18-electron compounds is made possible by increases in the solubility and thermal stability of the cation radicals in media containing the poorly nucleophilic anion [B(C6F5)4]-, TFAB.     

Diastereoselective formation of a dipalladium(I) complex supported by a bridging tetradentate ligand,and oxidative addition of RS-H across a phosphine-bridged Pd(I)-Pd(I) bond

The ligand CH2(P(o-C6H4NMe2)2)2 (dmapm) gives access to the first example of a dipalladium(I) complex supported by a tetradentate ligand, Pd2Cl2(mu-N,P,P,N-dmapm), which, unlike the well-known Pd2X2(mu-dppm)2 complexes (X = halide, dppm = bis(diphenylphosphino)methane), reacts with thiols to give addition of RS-H across a phosphine-bridged Pd-Pd bond.     

Re(eta(5)-C5H5)(CO)3]+ family of 17-electron compounds: monomer/dimer equilibria and other reactions

The anodic electrochemical oxidations of ReCp(CO)3 (1, Cp = eta(5)-C5H5), Re(eta(5)-C5H4NH2)(CO)3 (2), and ReCp*(CO)3 (3, Cp* = eta(5)-C5Me5), have been studied in CH2Cl2 containing [NBu4][TFAB] (TFAB = [B(C6F5)4]-) as supporting electrolyte. One-electron oxidations were observed with E(1/2) = 1.16, 0.79, and 0.91 V vs ferrocene for 1-3, respectively. In each case, rapid dimerization of the radical cation gave the dimer dication, [Re2Cp(gamma)2(CO)6]2+ (where Cp(gamma) represents a generic cyclopentadienyl ligand), which may be itself reduced cathodically back to the original 18-electron neutral complex ReCp(gamma)(CO)3. DFT calculations show that the SOMO of 1+ is highly Re-based and hybridized to point away from the metal, thereby facilitating the dimerization process and other reactions of the Re(II) center. The dimers, isolated in all three cases, have long metal-metal bonds that are unsupported by bridging ligands, the bond lengths being calculated as 3.229 A for [Re2Cp2(CO)6]2+ (1(2)2+) and measured as 3.1097 A for [Re2(C5H4NH2)2(CO)6]2+ (2(2)2+) by X-ray crystallography on [Re2(C5H4NH2)2(CO)6][TFAB]2. The monomer/dimer equilibrium constants are between K(dim) = 10(5) M(-1) and 10(7) M(-1) for these systems, so that partial dissociation of the dimers gives a modest amount of the corresponding monomer that is free to undergo radical cation reactions. The radical 1+ slowly abstracts a chlorine atom from dichloromethane to give the 18-electron complex [ReCp(CO)3Cl]+ as a side product. The radical cation 1+ acts as a powerful one-electron oxidant capable of effectively driving outer-sphere electron-transfer reactions with reagents having potentials of up to 0.9 V vs ferrocene.     

Unexpected reaction of the unsaturated cluster host and catalyst [Pd3(mu3-CO)(dppm)3]2+ with the hydroxide ion: spectroscopic and kinetic evidence of an inner-sphere mechanism

The title cluster, [Pd(3)(mu(3)-CO)(dppm)(3)](2+) (dppm=bis(diphenylphosphino)methane), reacts with one equivalent of hydroxide anions (OH(-)), from tetrabutylammonium hydroxide (Bu(4)NOH), to give the paramagnetic [Pd(3)(mu(3)-CO)(dppm)(3)](+) species. Reaction with another equivalent of OH(-) leads to the zero-valent compound [Pd(3)(mu(3)-CO)(dppm)(3)](0). From electron paramagnetic resonance analysis of the reaction medium using the spin-trap agent 5,5-dimethyl-1-pyrroline-N-oxide (DMPO), the 2-tetrahydrofuryl or methyl radicals, deriving from the tetrahydrofuran (THF) or dimethyl sulfoxide (DMSO) solvent, respectively, were detected. For both [Pd(3)(mu(3)-CO)(dppm)(3)](2+) and [Pd(3)(mu(3)-CO)(dppm)(3)](+), the mechanism involves, in a first equilibrated step, the formation of a hydroxide adduct, [Pd(3)(mu(3)-CO)(dppm)(3)(OH)]((n-1)+) (n=1, 2), which reacts irreversibly with the solvent. The kinetics were resolved by means of stopped-flow experiments and are consistent with the proposed mechanism. In the presence of an excess of Bu(4)NOH, an electrocatalytic process was observed with modest turnover numbers (7-8). The hydroxide adducts [Pd(3)(mu(3)-CO)(dppm)(3)(OH)]((n-1)+) (n=1, 2), which bear important similarities to the well-known corresponding halide adducts [Pd(3)(mu(3)-CO)(dppm)(3)(mu(3)-X)](n) (X=Cl, Br, I), have been studied by using density functional theory (DFT). Although the optimised geometry for the cluster in its +2 and 0 oxidation states (i.e., cation and anion clusters, respectively) is the anticipated mu(3)-OH form, the paramagnetic species, [Pd(3)(mu(3)-CO)(dppm)(3)(OH)](0), shows a mu(2)-OH form; this suggests an important difference in electronic structure between these three species.     

Reactions of ReX(CO)3(L-L) complexes with halogens [X = Cl or Br; L-L = bis(diphenylphosphino)methane or 2,2′-bipyridyl]

Summary Treatment of ReX(CO)₃(dppm) [X = Cl or Br; dppm = bis(diphenylphosphino)methane] with halogens gives the seven-coordinate ReX₃(CO)₂(dppm) complexes as well as ReBr₄(dppm). The ReCl₃(CO)(bipy), ReBr₄(bipy) and ReBr₃Cl(bipy) complexes and the previously characterised ReX₃(CO)₂(bipy) have all been isolated from the ReX(CO)₃(bipy) — X₂ systems, (bipy = 2,2-bipyridyl).     

Linear metal-metal-bonded tetranuclear M-Mo-Mo-M complexes (M = Ir and Rh): oxidative metal-metal bond formation in a tetrametallic system and 1,4-addition reaction of alkyl halides

Reaction of Mo2(pyphos)4 (1) with [MCl(CO)2]2 (M = Ir and Rh) afforded linear tetranuclear complexes of a formula Mo2M2(CO)2(Cl)2(pyphos)4 (2, M = Ir; 3, M = Rh). X-ray diffraction studies confirmed that two "MCl(CO)" fragments are introduced into both axial sites of the Mo2 core in 1 and coordinated by two PPh2 groups in a trans fashion, thereby forming a square-planar geometry around each M(I) metal. Treatment of 2 and 3 with an excess amount of tBuNC and XylNC induced dissociation of the carbonyl and chloride ligands to yield the corresponding dicationic complexes [Mo2M2(pyphos)4(tBuNC)4](Cl)2 (5a, M = Ir; 6a, M = Rh) and [Mo2M2(pyphos)4(XylNC)4](Cl)2 (7, M = Ir; 8, M = Rh). Their molecular structures were characterized by spectroscopic data as well as X-ray diffraction studies of BPh4 derivatives [Mo2M2(pyphos)4(tBuNC)4](BPh4)2 (5b, M = Ir; 6c, M = Rh), which confirmed that there is no direct sigma-bonding interaction between the M(I) atom and the Mo2 core. The M(I) atom in 5 and 6 can be oxidized by either 2 equiv of [Cp2Fe][PF6] or an equimolar amount of I2 to afford Mo(II)2M(II)2 complexes, [Mo2M2(X)2(tBuNC)4(pyphos)4]2+ in which two Mo-M(II) single bonds are formed and the bond order of the Mo-Mo moiety has been decreased to three. The Ir(I) complex 5a reacted not only with methyl iodide but also with dichloromethane to afford the 1,4-oxidative addition products [Mo2Ir2(CH3)(I)(tBuNC)4(pyphos)4](Cl)2 (13) and [Mo2Ir2(CH2Cl)(Cl)(tBuNC)4(pyphos)4](Cl)2 (15), respectively, although the corresponding reactions using the Rh(I) analogue 6 did not proceed. Kinetic analysis of the reaction with CH3I suggested that the 1,4-oxidative addition to the Ir(I) complex occurs in an SN2 reaction mechanism.     

Synthesis and characterization of a new family of square-planar nickel(II) carbonyl derivatives

The reaction of [NBu(4)](2)[Ni(C(6)F(5))(4)] (1) with solutions of dry HCl(g) in Et(2)O results in the protonolysis of two Nibond;C(6)F(5) bonds giving [NBu(4)](2)[[Ni(C(6)F(5))(2)](2)(mu-Cl)(2)] (2 a) together with the stoichiometrically required amount of C(6)F(5)H. Compound 2 a reacts with AgClO(4) in THF to give cis-[Ni(C(6)F(5))(2)(thf)(2)] (3). Reacting 3 with phosphonium halides, [PPh(3)Me]X, gives dinuclear compounds [PPh(3)Me](2)[[Ni(C(6)F(5))(2)](2)(mu-X)(2)] (X=Br (2 b) or I (2 c)). Solutions of compounds 2 in CH(2)Cl(2) at 0 degrees C do not react with excess CNtBu, but do react with CO (1 atm) to split the bridges and form a series of terminal Ni(II) carbonyl derivatives with general formula Qcis-[Ni(C(6)F(5))(2)X(CO)] (4). The nu(CO) stretching frequencies of 4 in CH(2)Cl(2) solution decrease in the order Cl (2090 cm(-1))>Br (2084 cm(-1))>I (2073 cm(-1)). Compounds 4 revert to the parent dinuclear species 2 on increasing the temperature or under reduced CO pressure. [NBu(4)]cis-[Ni(C(6)F(5))(2)Cl(CO)] (4 a) reacts with AgC(6)F(5) to give [NBu(4)][Ni(C(6)F(5))(3)(CO)] (5, nu(CO)(CH(2)Cl(2))=2070 cm(-1)). Compound 5 is also quantitatively formed ((19)F NMR spectroscopy) by 1:1 reaction of 1 with HCl(Et(2)O) in CO atmosphere. Complex 3 reacts with CO at -78 degrees C to give cis-[Ni(C(6)F(5))(2)(CO)(2)] (6, nu(CO)(CH(2)Cl(2))=2156, 2130 cm(-1)), which easily decomposes by reductive elimination of C(6)F(5)bond;C(6)F(5). Compounds 3 and 6 both react with CNtBu to give trans-[Ni(C(6)F(5))(2)(CNtBu)(2)] (7). The solid-state structures of compounds 3, 4 b, 6, and 7 have been established by X-ray diffraction methods. Complexes 4-6 are rare examples of square-planar Ni(II) carbonyl derivatives.     

Rhodium dimers with 2,2-dimethyl-1,3-diisocyano and bis(diphenylphosphino)methane bridging ligands

Four rhodium dimers have been synthesized with a bridging diisocyanide ligand, dmb (2,2-dimethyl-1,3-diisocyanopropane): [Rh2(dmb)4](BPh4)2, [Rh2(dmb)4Cl2]Cl2, [Rh2(dmb)4I2](PF6)2, and [Rh2(dmb)2(dppm)2](BPh4)2 (dppm = bis(diphenylphosphino)methane). The complexes have been characterized by elemental analysis and mass spectrometry, as well as UV-visible, IR, and 1H NMR spectroscopies. X-ray crystal structures of the rhodium(I) complexes, [Rh2(dmb)4](BPh4)2 . 1.5CH3CN (3.2330(4), 3.2265(4) A) and [Rh2(dmb)2(dppm)2](BPh4)2.0.5CH3OH . 0.2H2O (3.0371(5) A), confirm the existence of short Rh...Rh interactions. The metal-metal separation for the rhodium(II) adduct, [Rh(2)(dmb)4Cl2]Cl2.6CHCl3 (2.8465(6) A), is consistent with a formal Rh-Rh bond. For the two luminescent rhodium(I) dimers and six previously investigated diisocyano-bridged dimers with and without dppm ligands, the intense spin-allowed dsigma-->psigma absorption band maximum shifts to longer wavelengths with decreasing Rh...Rh separation, and there is an approximate correlation between band energy and the inverse of the metal-metal separation cubed. Both [Rh2(dmb)4]2+ and [Rh2(dmb)4(dppm)2]2+ undergo oxidative addition in the presence of iodine. In the conversion of [Rh2(dmb)4]2+ to [Rh2(dmb)4I2]2+, the observed intermediate is tentatively assigned to a tetramer composed of two rhodium dimers. In the case of [Rh2(dmb)2(dppm)2]2+, no intermediate was detected.     

Halide addition/abstraction in phosphido derivatives: isolation of the thallium and silver intermediates

Reaction of unsaturated (44e (-) skeleton) [PdPt 2(mu-PPh 2) 2(mu-P 2Ph 4)(R F) 4] 4 with Br (-) produces the saturated (48e (-) skeleton) complex [NBu 4][(R F) 2Pt(mu-PPh 2)(mu-Br)Pd(mu-PPh 2)(mu-P 2Ph 4)Pt(R F) 2] 5 without any M-M' bond. Attempts to eliminate Br (-) of 5 with Ag (+) in CH 2Cl 2 as a solvent gives a mixture of [(R F) 2Pt (III)(mu-PPh 2) 2Pt (III)(R F) 2] and some other unidentified products as a consequence of oxidation and partial fragmentation. However, when the reaction of 5 with Ag (+) is carried out in CH 3CN, no oxidation is observed but the elimination of Br (-) and the formation of [(R F) 2(CH 3CN)Pt(mu-PPh 2)Pd(mu-PPh 2)(mu-P 2Ph 4)Pt(R F) 2] 6 (46e (-) skeleton), a complex with a Pt-Pd bond, takes place. It is noteworthy that the reaction of 5 with TlPF 6 in CH 2Cl 2 does not precipitate TlBr but forms the adduct [(R F) 2PtTl(mu-PPh 2)(mu-Br)Pd(mu-PPh 2)(mu-P 2Ph 4)Pt(R F) 2] 7 with a Pt-Tl bond. Likewise, 5 reacts with [AgOClO 3(PPh 3)] in CH 2Cl 2 forming the adduct [AgPdPt 2(mu-Br)(mu-PPh 2) 2(mu-Ph 2P-PPh 2)(R F) 4(PPh 3)] 8, which contains a Pt-Ag bond. Both adducts are unstable in a CH 3CN solution, precipitating TlBr or AgBr and yielding the unsaturated 6. The treatment of [NBu 4] 2[(R F) 2Pt(mu-PPh 2) 2Pd(mu-PPh 2) 2Pt(R F) 2] in CH 3CN with I 2 (1:1 molar ratio) at 233 K yields a mixture of 4 and 6, which after recrystallization from CH 2Cl 2 is totally converted in 4. If the reaction with I 2 is carried out at room temperature, a mixture of the isomers [NBu 4][(R F) 2Pt(mu-PPh 2)(mu-I)Pd(mu-PPh 2)(mu-P 2Ph 4)Pt(R F) 2] 9 and [NBu 4][(R F)(PPh 2R F)Pt(mu-PPh 2)(mu-I)Pd(mu-PPh 2) 2Pt(R F) 2] 10 are obtained. The structures of the complexes have been established on the bases of NMR data, and the X-ray structures of 5- 8 have been studied. The relationship between the different complexes has been studied.