PPA-SiO2 Catalyzed Multi-component Synthesis of N-[α-(β-Hydroxy-α-naphthyl)(benzyl)] O-Alkyl Carbamate Derivatives

Silica-supported polyphosphoric acid (PPA-SiO2) was found to be an efficient catalyst for the multi-component condensation reaction of benzaldehydes, 2-naphthol, and methyl/benzyl carbamate to afford the corresponding N-[α-(β-hydroxy-α-naphthyl)(benzyl)] O-alkyl carbamate derivatives in good to excellent yields. This new approach consistently has the advantage of short reaction time, high conversions, clean reaction profiles, and simple experimental and work-up procedures.     

Nanomagnetic‐supported Sulfonic Acid: Simple and Rapid Method for the Synthesis of α,α′‐Bis‐(substituted‐benzylidene) Cycloalkanones

Nanomagnetic‐supported sulfonic acid is found to be a powerful and reusable heterogeneous catalyst for the rapid synthesis of α,α′‐bis‐(substituted‐benzylidene)cycloalkanones under conventional heating and solvent free conditions. High yield, simple work up and easy recovery of the catalyst are the most obvious advantages of this procedure.     

Highly Efficient InBr3 Catalyzed Michael Addition of Indoles to α, β-Unsaturated Esters

A highly efficient synthetic strategy toward Michael addition of indoles to α,β‐unsaturated esters has been developed using Lewis acid InBr₃ as catalyst. The reactions generated 3‐substituted indoles in high yields with excellent regio‐selectivity in the presence of catalytic amount of InBr₃ under mild reaction conditions. The method is simple, efficient and practical.     

Application of Sulfonic Acid Functionalized SBA‐15 as a New Nanoporous Acid Catalyst in the Green One‐Pot Synthesis of Spirooxindole‐4H‐pyrans

Sulfonic acid functionalized SBA‐15 (SBA‐Pr‐SO₃H) as a new nanoporous solid acid catalyst was applied in the green one‐pot synthesis of spirooxindole‐4H‐pyrans via condensation of isatins, malononitrile or methyl cyanoacetate or ethyl cyanoacetate, and 4‐hydroxycoumarin in water solvent. SBA‐Pr‐SO₃H was proved to be an efficient heterogeneous nanoporous solid acid catalyst with a pore size of 6 nm that could be easily handled and removed from the reaction mixture by simple filtration and can be recovered and reused for several times without any loss of activity. The significant merits of present methodology are its simplicity, short reaction time, good yields, and environmentally benign mild reaction condition as water was used as a green solvent.     

FeCl_3: Highly Efficient Catalyst for Synthesis of α-Amino Nitriles

α‐Amino nitriles are synthesized by the three‐component coupling reaction of aldehydes, amines and trimethylsilyl cyanide using FeCl₃ as a solid acid catalyst, under solvent‐free conditions in good yields. The catalyst was recovered by simple filtration and was recycled in subsequent reactions.     

A Convenient Method for the Preparation of 1,5‐Diaryl‐3‐(arylamino)‐1H‐pyrrol‐2(5H)‐ones

A simple and eco‐friendly method for the preparation of 1,5‐diaryl‐3‐(arylamino)‐1H‐pyrrol‐2(5H)‐ones via the cyclo‐condensation reaction of aldehydes, amines and ethyl pyruvate in the presence of silica supported ferric chloride (SiO₂‐FeCl₃) as reusable heterogeneous catalyst is described. The present methodology offers several advantages such as excellent yields, simple procedure and short reaction times.     

Efficient One‐Pot Synthesis of Bis(4‐hydroxycoumarin)methanes in the Presence of Sulfonic Acid Functionalized Nanoporous Silica (SBA‐Pr‐SO3H)

An efficient and simple method for the synthesis of bis(4‐hydroxycoumarin)methanes has been achieved through a one‐pot condensation of aryl aldehydes and 4‐hydroxycoumarin in the presence of nanoporous solid acid catalyst of SBA‐Pr‐SO₃H with pore size of 6 nm. Excellent yields, short reaction times, reusability of the catalyst and simple workup are advantages of this synthetic procedure.     

NH2SO3H–SiO2 as a new water‐compatible,recyclable heterogeneous catalyst for the synthesis of novel (α,β‐unsaturated) β‐amino ketones via aza‐Michael reaction

NH₂SO₃H–SiO₂/water as a novel catalytic system was used for the synthesis of (α,β‐unsaturated) β‐amino ketones via aza‐Michael reaction at reflux conditions. The methodology was of general applicability and the catalyst exhibited activity up to five cycles. The catalyst was characterized for the first time using FT‐IR, X‐ray diffraction and scanning electron microscopic–energy dispersion analytical X‐ray. The stability of the catalyst was evaluated by differential scanning calorimetry and TGA/differential thermal analysis. High efficiency of the catalyst along with its recycling ability and the rather low loading demonstrated in reactions are the merits of the presented protocol. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis of α‐(Fluorophenyl)pyridine by Palladium‐Catalyzed Cross‐Coupling Reaction

A series of α‐(fluoro‐substituted phenyl)pyridines have been synthesized by means of a palladium‐catalyzed cross‐coupling reaction between fluoro‐substituted phenylboronic acid and 2‐bromopyridine or its derivatives. The reactivities of the phenylboronic acids containing di‐ and tri‐fluoro substituents with α‐pyridyl bromide were investigated in different catalyst systems. Unsuccessful results were observed in the Pd/C and PPh₃ catalyst system due to phenylboronic acid containing electron‐withdrawing F atom(s). For the catalyst system of Pd(OAc)₂/PPh₃, the reactions gave moderate yields of 55% –80%, meanwhile, affording 10% –20% of dimerisation (self‐coupling) by‐products, but trace products were obtained in coupling with 2,4‐difluorophenylboronic acids because of steric hinderance. Pd(PPh₃)₄ was more reactive for boronic acids with sterically hindering F atom(s), and the coupling reactions gave good yields of 90% and 91% without any self‐coupling by‐product.     

Asymmetric Synthesis of (R)-Fluoxetine: A Practical Approach Using Recyclable and in-situ Generated Oxazaborolidine Catalyst

A practical route for the synthesis of (R)-fluoxetine•HCl (ee＝96%) in 56% overall yield was described. The key intermediate (R)-3-chloro-1-phenyl-1-propanol was obtained by the asymmetric reduction of prochiral 3-chloropropiophenone using in-situ generated oxazaborolidine catalyst derived from (S)-α,α-diphenylprolinol. The chiral procatalyst (S)-α,α-diphenylprolinol was recovered quantitatively and recycled. An improved practical synthesis of (S)-α,α-diphenylprolinol was also discussed.     

Three‐component solventless Strecker synthesis of α‐aminonitriles catalysed by a renewable sulfonated nanoporous carbon catalyst (CMK‐5‐SO3H)

The one‐pot three‐component synthesis of a variety of α‐aminonitriles has been studied using a catalytic amount of a sulfonic acid‐functionalized ordered nanoporous carbon catalyst, CMK‐5‐SO₃H, at room temperature under solvent‐free reaction conditions. The heterogeneous catalyst could be readily isolated from the reaction mixture and reused at least ten times without significant loss in activity. A clean, rapid and simple method for the preparation of α‐aminonitriles using the recoverable CMK‐5‐SO3H catalyst is described.     

Highly Efficient Synthesis of α‐Halomethylketones via Ce(SO4)2/Acid Co‐Catalyzed Hydration of Alkynes

A general atom‐economical approach for the synthesis of α‐halomethyl ketones is demonstrated through Ce(SO₄)₂/acid co‐catalyzed hydration of a wide range of haloalkynes. The reactions are conducted under convenient conditions and provide products with excellent regioselectivity in good to excellent yields, with broad substrate scope. This protocol is an alternative to conventional α‐halogenation of ketones.     

Studies on Hydroiodination and Deconjugation of 5—Aryloxy—（thiophenyl）—3—pentyn—2—one

One-pot hydroiodination and deconjugation of 5-aryloxy(or thiophenyl)-3-pentyn-2-one with a reagent system of sodium iodide/trimethylsilyl chloride/water in acetonitrile at 25℃ have been described.The plasuible mechanism was discussed.The reaction provided a simple and useful method for the preparation of (Z)-β-substituted β，γ-enones and (Z)-β-substituted α，β-unsaturated ketones.     

Stereoselective Cycloaddition of N-Acyliminium Ions with α,β-Unsaturated Ketones and Esters

The [4+2] reactions of N‐acyliminium ions, produced from 2‐aryl‐3‐hydroxy‐2,3‐dihydroisoindol‐1‐ones or 5‐hydroxy‐1‐phenyl‐2,5‐dihydro/2,3,4,5‐tetrahydropyrrol‐2‐ones in the presence of BF₃OEt₂, with α,β‐unsaturated ketones or esters were examined, and the dependence of these reactions on the substituents at double bonds was clarified. For β‐aryl substituted α,β‐unsaturated ketones and esters such as 4‐aryl‐3‐buten‐2‐ones, chalcones and methyl cinnamate, the [4+2] reactions could proceed smoothly at room temperature to afford 6‐acyl‐5,6,6a,11‐tetrahydroisoindolo[2,1‐a]quinolin‐11‐ones and 4‐acyl‐1,3a,4,5‐tetrahydropyrrolo[1,2‐a]quinolin‐ 1‐ones or 4‐acyl‐1,2,3,3a,4,5‐hexahydropyrrolo[1,2‐a]quinolin‐1‐ones in moderate to high yields; while for simple α,β‐unsaturated ketones and esters such as methyl crotonate and ethyl 3‐methylbut‐2‐enoate, except mesityloxide, the [4+2] reactions were difficult to proceed. The cycloaddition reactions were highly stereoselective, and only one stereoisomer was produced in each reaction.     

Isatin‐SO3H coated on amino propyl modified magnetic nanoparticles (Fe3O4@APTES@isatin‐SO3H) as a recyclable magnetic nanoparticle for the simple and rapid synthesis of pyrano[2,3‐d] pyrimidines derivatives

Isatin‐SO₃H coated on amino propyl modified magnetic nanoparticles (Fe₃O₄@APTES@isatin‐SO₃H) is found to be a novel, efficient, and reusable magnetic nanocatalyst, and characterized by FT‐IR, SEM, TEM, XRD, EDX, VSM, and TGA analysis. The magnetic nanocatalyst demonstrated outstanding performance in synthesis of pyrano[2,3‐d] pyrimidines derivatives via one‐pot three‐component reaction of various aromatic aldehydes 1, malononitrile 2, and barbituric acid 3 under reflux conditions in mixture of H₂O:EtOH (1:1) as solvent. Easy workup procedure, short reaction time, high yield, simple preparation and easy recovery of the catalyst, mild reaction conditions are some advantages of this work.     

NaY Zeolite Functionalized by Sulfamic Acid/Cu(OAc)2 as a Novel and Reusable Heterogeneous Hybrid Catalyst in Efficient Synthesis of Bis,Tris, and Tetrakis(indolyl)methanes, 3,4‐Dihydropyrimidin‐2(1H)‐ones,and 2‐Aryl‐1H‐benzothiazoles

An efficient acid‐catalyzed synthesis of some bis, tris, and tetrakis(indolyl)methanes, 3,4‐dihydropyrimidin‐2(1H )‐ones, and 2‐aryl‐1H ‐benzothiazoles is reported using NaY zeolite functionalized by sulfamic acid/Cu(OAc )₂ (NaY zeolite‐NHSO₃H /Cu(OAc )₂) in excellent yield. The heterogeneous catalyst has a simple work‐up procedure and could be recycled and reused for six reaction cycles.     

Mn(III)‐Mediated Chlorination of Conjugated Ketones

Mn(III)‐Cl formed by the reaction of Mn(OAc)₃ and hydrochloric acid in situ, reacted with α,β‐unsaturated ketones readily to afford α,β‐dichloroketones in good yields under mild conditions. The products are key precursors for synthesis of conjugated alkynones and other organic compounds.     

Synthesis and Characterization of α-Bromo Chalcone Derivatives

α-Bromo chalcones containing 2-thiene ring were prepared in good yields by the condensation of 1-(thien-3-yl)ethanone with aromatic aldehydes, followed by bromination with bromine and selective dehydrobromination with triethyl amine at room temperature.     

A Modified and Green Procedure for the Synthesis of β-Amido Ketones Using a BrΦnsted-Acidic Ionic Liquid as Novel and Reusable Catalyst

A green and improved method for the synthesis of β‐amido ketones through one‐pot multi‐component reaction of an enolizable ketone, aryl aldehyde, acetonitrile or benzonitrile in the presence of trimethylsilyl chloride using 3‐methyl‐1‐(4‐sulfonic acid)butylimidazolium hydrogen sulfate [(CH₂)₄SO₃HMIM][HSO₄], a Br?nsted‐acidic ionic liquid, as an effective and recyclable catalyst is described. The present methodology offers several advantages such as simple procedure with an easy work‐up, relatively short reaction time, and good to excellent yields.     

Ceramic Filter Balls Loaded with α-Fe2O3 and Their Application to NH3-N Wastewater Treatment

Hydrolysis reaction of Fe(NO₃)₃ at a high temperature in the presence of urea as the homogeneous precipitant was studied. With the prepared ceramic filter balls loaded with α-Fe₂O₃ after high temperature calcination, the loading of α-Fe₂O₃ on the porous ceramic filter balls from Fe(NO₃)₃ solutions of different concentrations and mechanical stability of the loaded α-Fe₂O₃ were studied. The product was characterized using XRD and SEM. Adsorption experiments were conducted to evaluate the performance of the product in adsorbing NH₃-N. It turned out that the specific surface area of the ceramic filter balls loaded with α-Fe₂O₃ had increased to 36.5387 m²/g from original 4.6127 m²/g. When the concentration of Fe(NO₃)₃ was 0.40 mol/L, the loading of α-Fe₂O₃ on the ceramic filter balls accounted for 8.4% of the total mass of the adsorbent and α-Fe₂O₃ was adsorbed on the filter balls very well. The adsorption isotherm of NH₃-N on the ceramic filter ball adsorbent loaded with α-Fe₂O₃ was of Langmuir type. The saturated adsorption capacity was 3.33 mg/L, and the adsorption constant K was 0.1873. NH₃-N was adsorbed by α-Fe₂O₃ more easily, which was a kind of specific adsorption.