基底温度对喷涂技术制备大面积有机太阳能电池性能的影响

以聚3-己基噻吩（P3HT）和富勒烯衍生物（PCBM）体系的有机太阳能电池器件为基础,采用喷涂法制备了有机太阳能电池的空穴传输层和有机功能层,研究了基底温度对薄膜的形貌和器件性能的影响,并采用喷涂技术制备了一面积为11.2 cm²的大面积有机太阳能电池器件。研究发现,随着基底温度的升高,薄膜的粗糙度下降,吸收率提高,当基底温度为130 ℃时器件的性能最优,面积为25 mm²的器件的能量转换效率为2.09%。将多个独立的小面积电池进行串联和并联,制备了有效面积为11.2 cm²的大面积有机太阳能电池组件,其能量转换效率为1.83%,在面积增大44.8倍的情况下,效率仅损失不到13%。     

基于金纳米棒@二氧化硅表面等离子体共振增强的有机太阳能电池

把包裹SiO₂的金纳米棒（Au NRs@SiO₂）掺杂到有机太阳能电池的活性层中,利用表面等离子体共振效应来增强活性层对光的吸收,从而提高有机太阳能电池的能量转换效率。研究了不同掺杂浓度和不同包裹厚度对电池性能的影响。结果表明,掺杂浓度为1.5%时,器件性能最佳,能量转换效率达到4.02%;SiO₂壳层厚度为3 nm时,转换效率达到4.38%,较标准电池提升了29.2%。     

有机太阳能电池研究进展

为了减轻当前能源危机所带来的压力,各国在太阳能电池等清洁能源领域投入了大量的人力、物力和财力.由于有机太阳能电池具有独特的优点(有机材料易于修饰,器件制备方法简便且可制备出柔韧器件),并且随着相关研究的深入,有机太阳能电池的能量转换效率逐步得到提高,这昭示了有机太阳能电池商业化的美好前景,目前已经有大批科研工作者投身于有机太阳能电池领域的研发工作.文章从太阳能电池小分子材料、聚合物材料和提高有机太阳能电池能量转换效率的方法这三方面入手,对有机太阳能电池领域进行综述.     

一种新的基于频域有限差分方法的小周期有机太阳能电池的光电特性

由MoO₃/Ag/MoO₃ （MAM）组成的多层膜结构非常有希望替代ITO作为有机太阳能电池中的透明阳极.然而,基于MAM结构的有机太阳能电池光吸收能力较弱.为此,引入了一种小周期短节距金属光栅,利用表面等离子激元增强活性层的光吸收.借助于频域有限差分方法求解麦克斯韦方程和半导体方程,探讨了有机太阳能电池结构的光学和电学性质.分析结果表明：与平面结构相比,活性层中的光吸收大大提高;同时,当凹槽宽度为4 nm,能量转换效率提高了49%.相关结果有助于更好地开发和利用无ITO层的有机太阳能电池.     

基于柔性基底异质结有机薄膜的光伏器件

研究了基于柔性基板的有机薄膜太阳能电池,实验以聚3,4-乙撑二氧噻吩/聚苯乙烯磺酸盐作为阳极修饰层,1,4-亚苯基亚乙烯基（MEH-PPV）材料作为给体层以及富勒烯（C60）材料作为受体层制备异质结柔性有机太阳能电池。实验结果表明:增加阳极修饰层,虽然会阻挡光的吸收,但是可以大幅度地提高短路电流、开路电压、填充因子和能量转换效率4个参数。并发现MEH-PPV受体层的厚度对有机太阳能电池的性能有较大影响,当受体层厚度为90 nm时能量转换效率达到最大,为1.29%。     

电纺ZnO纳米纤维电子传输层提高倒置PTB7∶PC70BM电池效率

研究利用静电纺丝制备的不同直径ZnO纳米纤维作为倒置结构有机太阳能电池的电子传输层对器件转化效率的影响。首先通过静电纺丝技术成功制备了半径在43～110 nm之间的ZnO纳米纤维,然后将ZnO纳米纤维作为电子传输层加入到倒置结构有机太阳能电池（ITO/ZnO∶ZnO nanofiber/PTB7∶PC₇₀BM/MoO₃/Al）。与平面结构的ZnO电子传输层相比,ZnO纳米纤维具有比表面积大等优点,增加了电子传输和抽取能力,提高了器件的光电转化效率。实验发现ZnO纳米纤维的直径越小,电池效率越大。当ZnO纳米纤维直径为(46±5)nm,接收时间为30 s时,作为电子传输层的电池效率提高了8%。     

稀释溶剂对PEDOT：PSS薄膜和有机太阳能电池性能的影响

采用喷涂技术制备聚3,4-乙撑二氧噻吩：聚苯乙烯磺酸盐（PEDOT：PSS）有机层薄膜,系统研究了乙醇、去离子水、甲醇、异丙醇和乙二醇等稀释溶剂对PEDOT：PSS薄膜形貌、透过率及导电性能的影响。将PEDOT：PSS薄膜应用于有机太阳能电池器件的制备,研究了不同溶剂对器件性能的影响。实验结果表明：采用乙醇稀释PEDOT：PSS溶液,能有效抑制PEDOT：PSS颗粒团聚,降低薄膜粗糙度,提高薄膜的透过率和导电性。以其制备的太阳能电池器件的能量转换效率明显高于其他溶剂稀释,转换效率为2.66%。     

基于三元非富勒烯体系的高效有机太阳能电池

有机材料的"窄吸收"特性制约了有机太阳能电池(OPVs)性能的进一步突破,二元体异质结薄膜难以实现对太阳能的有效宽光谱利用.三元OPVs在二元体系中引入吸收互补的第三组分,能够增强器件光吸收,实现光电转化效率的大幅提升.近年来,非富勒烯受体材料的飞速进展,多次刷新有机太阳能电池最高效率记录,丰富并扩展了三元受体材料的选择范围.本文以非富勒烯受体材料Y6作为第三组分材料,高效率非富勒烯太阳能电池PBDB-T-2F:IT-4F作为基础二元器件,研究并分析了以双非富勒烯材料为受体的三元有机太阳能电池工作机理.通过光电特性分析,发现Y6的引入不仅能够增强器件近红外区域的光吸收能力,而且能够有效抑制双分子复合,提高电荷取出率,从而提高器件能量转换效率.通过调节Y6在三元体系中的质量百分比,在Y6占比为20 wt%时,器件实现最高的能量转换效率12.48%,相比于基础二元器件(10.59%)实现了17.85%的性能提升.     

PEG掺杂对钙钛矿太阳能电池的影响

为了提高钙钛矿太阳能电池的能量转化效率,减小回滞现象,研究了聚乙二醇(PEG)掺杂钙钛矿太阳能电池阳极修饰层PEDOT∶PSS对器件性能的影响。通过电容-电压(C-V)测试分析了PEDOT∶PSS修饰层和钙钛矿层之间的界面电荷积累情况,通过电流密度-时间(J-T)瞬态光电流的测量研究了修饰层和钙钛矿层之间缺陷态情况。结果表明,PEG掺杂阳极修饰层提高了器件的短路电流(J_(sc))、开路电压(V_(oc))和填充因子(FF),光电转化效率从7.5%提高到10.0%,光电转化效率提高了33%,经过掺杂后的器件回滞现象明显减弱。这种通过PEG掺杂PEDOT∶PSS的方法能够减少器件界面处的电荷积累和缺陷态,从而减小器件的回滞现象,提高器件的能量转化效率。     

金纳米四面体增强有机太阳电池光吸收及光伏性能研究

为增强有机太阳能电池的光利用率,提高能量转换效率,本文合成了金四面体形状的纳米粒子,并用聚苯乙烯磺酸钠(PSS)包裹形成了核壳结构的金纳米四面体(Au@PSS tetrahedra NPs).将其掺杂到有机太阳能电池空穴提取层与活性层的界面处,利用表面等离子体共振效应来增强活性层对光的吸收,从而提高有机太阳能电池的能量转换效率.研究了掺杂浓度和PSS包裹厚度对电池性能的影响.结果表明:掺杂浓度为6%时,器件性能最佳,能量转换效率达到3.08%; PSS壳层厚度优化为2.5 nm时,转换效率达到3.65%,较标准电池提升了22.9%.电池性能的改善主要源于金四面体纳米粒子的共振吸收峰位于给体材料吸收谱范围内,纳米粒子的共振促进了给体的吸收,同时PSS壳层的引入促进了激子的解离和电荷的转移,上述因素的改善提升了电池的短路电流、填充因子和转换效率.     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Hybrid Wavelength and Code Division Multiple Access in Optical Networks

A review of schemes for multiple access in fiber optic networks shows that a hybrid of wavelength and code division multiple access (WCDMA) combines the best features of both. In particular, the hybrid scheme retains the large information carrying capacity of wavelength division multiple access (WDMA) and flexibility of code division multiple access (CDMA). In this paper WDMA, optical CDMA (OCDMA), and WCDMA networks are discussed. In OCDMA networks, concept of incoherent and coherent coding including inverse decoding and matched filter is introduced. The delay performance of both WDMA and WCDMA networks, under the simple suboptimum access protocols based on cyclic search, is computed. It has been shown quantitatively that tuning delay significantly affects the delay performance of both WDMA and WCDMA networks. Futhermore, delay performance of WCDMA networks is always better than the WDMA networks for the same tuning delay, load, and number of users.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Single-beam self-referenced phase-sensitive surface plasmon resonance sensor with high detection resolution

A versatile and low-cost single-beam self-referenced phase-sensitive surface plasmon resonance(SPR)sensing system with ultra-high resolution performance is presented.The system exhibits a root-mean-square phase fluctuation of ±0.0028.over a period of 45 min.i.e.a resolution of±5.2×10-9 refractive index units.The enhanced performance has been achieved through the incorporation of three design elements:a true single-beam configuration enabling complete self-referencing so that only the phase change associated with SPR gets detected,a differential measurement scheme to eliminate spurious signals not related to the sensor response,and the elimination of retardation drifts by incorporating temperature stabilization in the liquid crystal phase modulato .Our design should bring the detection sensitivity of non-labeling SPR biosensing closer to that achievable by conventional fluorescence-based techniques.     

Influences of SiO2 protective layers and annealing on the laser-induced damage threshold of Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition.The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated.The results show that SiO2 protective layers exert little influence on the electric field intensity(EFI)distribution,microstructure and microdefect density but increase the absorption slightly.Annealing iS effective on decreasing the microdefect density and the absorption of the films.Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT.Moreover,the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.