Speciation of vanadium in oilsand coke and bacterial culture by high performance liquid chromatography inductively coupled plasma mass spectrometry

A simple and sensitive method for the speciation of vanadium(III), (IV), and (V) was developed by using high performance liquid chromatography and inductively coupled plasma mass spectrometry (HPLC-ICPMS). The EDTA-complexed vanadium species were separated on a strong anion exchange column with an eluent containing 2 mM EDTA, 3% acetonitrile, and 80 mM ammonium bicarbonate at pH 6. Each analysis was complete in 5 min. The detection limits were 0.6, 0.7 and 1.0 μg L⁻¹ for V(III), V(IV), and V(V), respectively. The method was applied to coke pore water samples from an oilsand processing/upgrading site in Fort McMurray, Alberta, Canada and to Shewanella putrefaciens CN32 bacterial cultures incubated with V(V). In the coke pore water samples, V(IV) and V(V) were found to be the major species. For the first time, V(III) was detected in the bacterial cultures incubated with V(V).     

4-(5-溴-2-噻唑偶氮)间苯二酚反相阳离子对HPLC测定痕量铌、钒、铑、铬

本文报道新试剂4-(5-溴-2-噻唑偶氮)间苯二酚(5-Br-TAR)为柱前衍生试剂,以阳离子表面活性剂作为对离子试剂,用含15 mmol／L的pH 5.8的乙酸-乙酸钠缓冲溶液、0.05 mmol／L溴化钠、10 mmol／L TBA·Br的乙腈-甲醇-水(42 : 13：45,V／V／V)三元体系为流动相,在C8柱上25min内HPLC测定了Nb(V)、V(V)、Rh(Ⅲ)和Cr(Ⅵ)的5-BR-TAR螯合物。当SNR=2时,检出限分别为Nb(V)1.0、V(V)1.6、Rh(Ⅲ)0.9和Cr(Ⅵ)1.9μg／L。该方法用于测定污水中的铬和钒,结果良好。     

2,3,7-Trihydroxyfluorones immobilized on cellulose matrices in test methods for determining rare elements

It was shown that 2,3,7-trihydroxyfluorones immobilized by adsorption on cellulose matrices can be used as reagents for the test determination of Mo(VI), Ti(IV), Ge(IV), Hf(IV), Nb(V), Ta(V), W(VI), Bi(III), V(IV), and Zr(IV). The change of the protolytic and complexing properties of trihydroxyfluorones immobilized on cellulose matrices was considered in comparison to corresponding properties in a solution. It was found that the reactions of trihydroxyfluorones with rare elements on cellulose matrices and in a solution exhibit similar effects upon the addition of cetylpyridinium. These effects are the bathochromic shift of the absorption maxima of the reagents and their complexes with analytes and the extension of the range of optimum acidity for complex formation. The complexation of salicylfluorones with the titanium(IV) in solution and on cellulose paper was studied by IR spectrometry. Phenylfluorone immobilized on a mixed-fiber cloth as used in test determinations of (mg/L) 0.05–5 Ti(IV), V(IV), Hf(IV), Nb(V), and Mo(VI); 0.01–5 Ge(IV) and Zr(IV); 0.05–1 Bi(III) and W(VI); and 0.1–5 Ta(V) by the color intensity of the indicator matrix after passing through 20 mL of a test solution. It was shown that phenylfluorone immobilized on cellulose paper can be used to determine (mg/L) 0.05–50 Ti(IV), 0.5–1000 Ge(IV), 0.5–500 Zr(IV), 5–200 Bi(III), 0.1–50 Mo(VI), 0.1–1000 V(IV), 0.1–100 Nb(V), 0.1–800 Hf(IV), 1–100 Ta(V), and 1–800 W(VI) by the length of the colored zone of a test strip after it was brought into contact with a test solution.     

Theoretical reduction potentials for nitrogen oxides from CBS-QB3 energetics and (C)PCM solvation calculations

The complete basis set method, CBS-QB3, is used in combination with two continuum solvation models for aqueous solvation to compute reduction potentials previously determined experimentally for 36 nitrogen oxides and related species of the general formula H(V)C(W)N(X)O(Y)Cl(Z). The PCM model led to the correlation E(o)exp (vs NHE) = 0.84E(o)calc + 0.03 V with an average error of 0.12 V (2.8 kcal/mol) and a maximum error of 0.32 V (7.4 kcal/mol). The CPCM/UAKS model gave E(o)exp (vs NHE) = 0.83E(o)calc + 0.11 V with the same average error. This general method was used to predict reduction potentials (+/-0.3 V) for nitrogen oxides for which reduction potentials are not known with certainty: NO2/NO2- (0.6 V), NO3/NO3- (1.9 V), N2O3-/N2O3(2-) (0.5 V), HN2O3/HN2O3- (0.9 V), HONNO,H+/HONNOH (1.6 V), 2NO,H+/HONNO (0.0 V), 2NO/ONNO- (-0.1 V), ONNO-/ONNO(2-) (-0.4 V), HNO,H+/H2NO (0.6 V), H2NO,H+/H2NOH (0.9 V), HNO,2H+/H2NOH (0.8 V), and HNO/HNO- (-0.7 V).     

Separation and enrichment of arsenic(V) with composite resin beads containing magnetite crystals.

The adsorption of arsenic(V) was investigated using macroporous resin beads containing magnetite crystals. Arsenic(V) was favorably adsorbed at pH 2-9, where the distribution coefficients were larger than 10(3). The maximum capacity was 0.050 mmol/g. Metal cations including Ca(II), Mn(II), Co(II), Ni(II), Cu(II), Zn(II) and La(III) did not give serious interference at 10(-4) M level. Diluted arsenic(V) was collected with a packed column, and the retained arsenic(V) was quantitatively eluted out with 1 M NaOH.     

The ion chromatographic separation of high valence metal cations using a neutral polystyrene resin dynamically modified with dipicolinic acid

A neutral polystyrene resin column, dynamically loaded with dipicolinic acid at a concentration of 0.1 mM in 1 M potassium nitrate eluent, was investigated for the separation characteristics of a number of high valence metal cations over the pH range 0-3. The metal species studied were Th(IV), U(VI), Zr(IV), Hf(IV), Ti(IV), Sn(IV), V(IV) and V(V), Fe(III) and Bi(III), of which Ti(IV), Sn(IV), V(IV) and Fe(III) did not show any retention. For the remaining metal ions, significant retention was obtained with good peak shapes, except for Th(IV), which moved only slightly from the solvent front with some tailing. The retention order at pH 0.3 was Th(IV) < V(V) < Bi(III) < U(VI) < Hf(IV) < Zr(IV). A notable feature of this separation system was the high selectivity shown for uranium, zirconium and hafnium, the last two being nearly resolved in 15 min on the relatively short 10 cm column.     

Reversed-phase ion-pair high performance liquid chromatographic determination of Co(III)-, Ni(II)-, V(V)- and Fe(III)-2-(2-benzothiazolylazo)-5-(3-sulforpropyl)aminophenol chelates

The separation and determination of Co(III), Ni(II), V(V) and Fe(III) chelates with 2-(2-benzothiazolylazo)-5-(3-sulfopropyl)aminophenol (BTASPAP) by reversed-phase ion-pair HPLC was investigated. In the presence of the oxidant potassium iodate, BTASPAP reacts with Co(III), Ni(II), V(V) and Fe(III) to form stable, negatively charged, water-soluble chelates. The chelates were separated on a C(18) siloxane bonded phase and eluted within 7 min with acetonitrile-acetate-water (36:1:63 v/v) containing 0.2 mol 1(-1) acetic acid-sodium acetate buffer (pH 3.0) and 1.0 mmol 1(-1) tetrabutylammonium bromide. The detection limits of Co(III), Ni(II), V(V) and Fe(III) at 565 nm are 0.3, 0.8, 0.3 and 1.0 ng (signal-to-noise ratio = 2), respectively. The method was applied to the determination of Co, Ni, V and Fe in four samples of standard alloys.     

Effects of a pulsing electric signal on the cross membrane potential and the cell division potentiality of a single cell of tobacco

A pulsing electric signal (pulse width 10 s) was applied to a single cell of cultured tobacco, line BY-2, by inserting a multifunctional microelectrode (MME) into the cell. The electric voltage (V(ET)) was loaded between the electrode terminals of the MME and the reference electrode situated in the extracellular medium. Since the electrical impedance of the MME was as large as that of the cell membrane, the effective potential acting across the cell membrane (V(CMP)) should be only some portion of V(ET). The MME enabled simultaneous measurement of V(ET) and V(CMP). When V(ET) was varied from 0 to -1 V, V(CMP) changed linearly in proportion to V(ET). When V(ET) variation range was enlarged (from 0 to -2 V), V(CMP) changing pattern became a declined curve. When V(ET) variation range was further enlarged (from 0 to -5 V), the V(CMP) changing pattern showed a saturation curve. Under this condition, the cell division potentiality decreased accordingly. Based on these results, the feasibility of V(CMP) as an indicator of the effective intensity of an electric stress signal is discussed. In the present case of a BY-2 cell, a proper intensity of V(CMP) that could cause an appreciable stress and not a lethal signal was estimated as -250 mV.     

Photometric determination of trace uranium(VI), phosphorus(V), arsenic(V), and vanadium(V) in saturated aqueous solutions of poorly soluble compounds

A procedure for extraction-photometric determination of uranium(VI) was developed and procedures for the determination of phosphorus(V), arsenic(V), and vanadium(V) were modernized. The solubility of some poorly soluble uranium compounds in aqueous solutions was determined. Deceased.     

Determination of arsenic(III), arsenic(V), antimony(III), antimony(V), selenium(IV) and selenium(VI) by extraction with ammonium pyrrolidinedithiocarbamate—methyl isobutyl ketone and electrothermal atomic absorption spectrometry

The solution conditions and other parameters affecting the ammonium pyrrolidine-dithiocarbamate—methyl isobutyl ketone extraction system for graphite-furnace atomic absorption spectrometric determination of As(III), As(V), Sb(III), Sb(V), Se(IV) and Se(VI) were studied in detail. The solution conditions for the single or simultaneous extraction of As(III), Sb(III) and Se(IV) were not critical. Arsenic(V) and Se(VI) were not extracted over the entire range of pH and acidity studied. Antimony(V) was extracted only in the acidity range 0.3—1.0 M HCl. Simultaneous extraction of total arsenic and total antimony was possible after reduction of As(V) with thiosulphate. Interference studies are also reported.     

制备纳米V2O5的新方法及其电化学性能的研究

目前对锂离子电池正极材料的研究主要为达到如下目标而进行:高的比容量和能量密度,良好的循环性和寿命,资源丰富、价格便宜以及环境友好。已进行了广泛研究的LiCoO_2、LiNiO_2、LiMn_2O_4等锂离子电池正极材料,虽然具有较高的电压平台、良好的稳定性和寿命,但其容量相对较低和价格较高限制了其进一步的应用和发展。     

借4-(2-噻唑偶氮)间苯二酚螯合物和反相高压液相色谱法以分离和测定钒、钴和铬

研究了V(V)、Co(II)和Cr(III)的TAB螯合物的柱前衍生条件和反相高压液相色谱分离条件, 并提出了同时测定ppb级的此三元素的新方法。于Zorbax ODS柱上,用含0.05mol.dm^-^3Li2SO4和0.01mol.dm^-^3HOAc-NaOAc(pH6.0)的46:54甲醇-水(v/v)溶液作流动相(0.7mL/min), 可于15min内将此三螯合物分离并检测(525nm)完毕。此方法快速、经济、灵敏选择性好。     

On-column complexation and simultaneous separation of vanadium(IV) and vanadium(V) by capillary electrophoresis with direct UV detection

An on-column complexation method has been developed for the simultaneous determination of V(IV) and V(V). Vanadium species were chelated with aminopolycarboxylic acids to form anionic complexes which were separated by capillary zone electrophoresis (CZE) with direct UV detection. Ethylenediaminetetraacetic acid (EDTA), diethylenetriaminepentacetric acid (DTPA), nitrilotriacetic acid (NTA), and N-2-hydroxyethylethlendiaminetriacetric acid (HEDTA) were investigated as both ligand and running electrolyte. Of the ligands studied the complexes of EDTA with V(IV) and V(V) resulted in the highest selectivity and UV response.The conditions used for on-column complexation and separation, including pH, and electrolyte ligand concentration, were examined to achieve reasonable separation selectivity and detection sensitivity. The optimum separation of the anionic forms of V(IV) and V(V) was obtained by use of CZE with UV detection at 185 nm and an electrolyte containing 5 mmol L(-1) EDTA at pH 4.0. Linear calibration plots were obtained in the concentration range10-300 micro mol L(-1); detection limits were 3 micro mol L(-1) for V(IV) and 1 micro mol L(-1) for V(V). The proposed method was demonstrated for the determination of vanadium in groundwater spiked with V(IV) and V(V).     

Formation and nitridation of vanadium–aluminum intermetallic compounds

V(5)Al(8) and V(3)Al intermetallics have been formed by interdiffusion, by annealing of sputtered V/Al-multilayers at 700 degrees C in vacuo; sapphire (102) was used as substrate. The V/Al intermetallics were nitridated in NH(3) at 900 degrees C for 1 min by RTP (rapid thermal processing). The samples were investigated with XRD (X-ray diffraction), SNMS (secondary neutral mass spectrometry), and AFM (atomic force microscopy). A 5-10 nm thick AlN film (001 textured) was formed by nitridation of V(5)Al(8) (110 textured) and 2-3% nitrogen was incorporated in the V(5)Al(8) bulk. Nitridation of V(3)Al resulted in the formation of VN and AlN. Direct nitridation of V/Al-multilayers showed that near the surface nitridation is faster than intermixing of the V and Al layers. The capability of VN as diffusion barrier for Al could also be shown.     

Studies in the complex formation of metal ions with sugars. I. The complex formation of cobalt(II), cobalt(3), copper(II) and nickel(II) with mannitol

The use of elastic polyurethane foam as a support for chloranil was proved successful. Reductions of cerium(IV), vanadium(V) and iron(II) on foam-filled columns were carried out quantitatively and rapidly. The effect of flow-rate and temperature on the reduction of each metal ion was examined in detail. Cerium(IV) was reduced quantitatively on passing through the foam-redox column at flow-rates of 2–11 ml min^-1 at room temperature. The reduction of vanadium(V) and iron(III) was slower; complete reduction occurred only at flow-rates up to 4 and 2 ml min^-1 for V(V) and Fe(III), respectively. At 35°, however, it was possible to use flow-rates of 7 and 6 ml min^-1 for the quantitative reduction of V(V) and Fe(III), respectively.     

Determination of aqueous plutonium oxidation states by solvent extraction

The reliability of two solvent extraction techniques for the determination of Pu oxidation states in solution was tested with low-ionic-strength solutions and with high-Na and high-Mg brines that contained Pu concentrations sufficient for spectrophotometric analysis. One procedure only differentiates between reduced Pu [Pu(III) and Pu(IV)] and oxidized Pu [Pu(V) and Pu(VI)], whereas the second procedure was designed to differentiate between Pu(IV), Pu(V), and Pu(VI) in solution. Both procedures successfully differentiated between oxidized and reduced Pu in both dilute solutions and brines when tested with samples that contained only the Pu(IV), Pu(V), or Pu(VI) oxidation states. However, when the second solvent extraction procedure, which differentiates between Pu(V) and Pu(VI), was employed for solutions that did not contain a strong oxidant to maintain the Pu(VI) oxidation state, significant quantities of Pu(VI) were reduced to Pu(V) during extraction, indicating that accurate quantification of Pu(V) and Pu(VI) is not possible with this procedure.Work supported by the U. S. Department of Energy under Contract DE-ACO6-76RLO 1830.     

Molecular Mechanics Calculations on Chelates of Titanium(IV), Vanadium(IV/V), Copper(II), Nickel(II), Molybdenum(IV/V), Rhenium(IV/V) and Tin(IV) with Di- and Tridentate Ligands Using the New Extensible Systematic Force Field (ESFF)—An Empirical Study

Force field calculations were performed on a series of 27 transition metal complexes of titanium(IV), vanadium(IV/V), copper(II), nickel(II), molybdenum(IV/V), rhenium(IV/V), and tin(IV) with a broad variety of di- or tridentate ligands in order to find a reliable scheme for determining the molecular structure of such chelates with the new Extensible Systematic Force Field (ESFF). A good agreement between theoretical results and experimental data was achieved. In some cases an unspecific fitting of the force field was necessary.     

Spectrophotometric study and extraction of niobium(V) complexes with catechol and its derivatives as ion-pairs with quaternary ammonium ions: Application to the separation of niobium from other refractory metal ions

The reactions of niobium(V) with catechol and several substituted derivatives were studied. Optimal conditions for colour development in the niobium(V)-catechol system are: pH 6.7–8.0, and heating at 85° for at least 6 min; the wavelength of maximal absorption is 365 nm, and the molar absorptivity is 1.02·10⁴. Catechol derivatives require lower temperatures and develop colours with niobium(V) in neutral or slightly acidic solutions. The best of the derivatives studied were 3-methyl-catechol and 4-chlorocatechol. Extraction of the ion-pairs formed between niobium-(V)-catechol and different quaternary ammonium ions, was studied with representative solvents. Similar studies were made on other refractory metal ions, i.e., Ti(IV), V(V), Mo(VI) and W(VI), under the optimal conditions for the reaction with niobium(V). Separations of binary (1:1) mixtures of niobium(V) with Ti(IV), V(V), Mo(VI) or W(VI) at the 5·10^-5M level were shown to be possible under the predicted conditions.     

Adsorption characteristics of As(V), Se(IV), and V(V) onto activated alumina: effects of pH, surface loading, and ionic strength

Arsenic, selenium, and vanadium are major anionic elements of concern in drinking water. This research investigated the adsorption characteristics of As(V), Se(IV), and V(V) onto a commercial activated alumina (AA) under different pH, surface loading, and ionic strength conditions using batch systems. The results indicated that the adsorption of these elements was significantly affected by pH and the surface loading. However, ionic strength generally did not impact their adsorption, indicating that the electrostatic effect on the adsorption of these elements was relatively not important compared to surface chemical reactions. A speciation-based adsorption model was used to simulate the adsorption of As(V), Se(IV), and V(V) by activated alumina and to determine the adsorption constants of different element species. This model can satisfactorily predict the adsorption of these elements in a broad pH range from 1.5 to 12 and a wide surface loading range from 1.0 to 50 mg/g activated alumina for different sorbent concentrations, using the same set of adsorption constants.     

Investigation of removal of Cr(VI), Mo(VI), W(VI), V(IV), and V(V) oxy-ions from industrial waste-waters by adsorption and electrosorption at high-area carbon cloth

Adsorption and electrosorption of Cr(VI), Mo(VI), W(VI), V(IV), and V(V) ions from water samples at low concentration were studied at high-area C-cloth electrodes. The concentrations of ions in the solution were monitored using in situ UV spectroscopy. All the investigated ions, except V(IV), showed better adsorption in acidic media. Positive polarization of the C-cloth caused increased adsorption of Cr(VI), Mo(VI), and V(V) ions. When previously adsorbed, Mo(VI) and V(V) ions were shown to be largely desorbable by negative polarization of the C-cloth. Since V(IV) does not become adsorbed significantly at the C-cloth in acidic media, the method provides an interesting means for separation of V(V) and V(IV) species in solution.