Low-temperature catalytic decomposition of hydrogen sulfide into hydrogen and diatomic gaseous sulfur

The thermodynamics of three pathways of the hydrogen sulfide decomposition reaction is considered. In the thermal process, the gas-phase dissociation of hydrogen sulfide yields hydrogen and diatomic singlet sulfur. Over sulfide catalysts, the reaction proceeds via the formation of disulfane (H₂S₂) as the key surface intermediate. This intermediate then decomposes to release hydrogen into the gas phase, and adsorbed singlet sulfur recombines into cyclooctasulfur. Over metal catalysts, H₂S decomposes via dissociation into surface atoms followed by the formation of gaseous hydrogen and gaseous triplet disulfur. The last two pathways are thermodynamically forbidden in the gas phase and can take place at room temperature only on the surface of a catalyst. An alternative mechanism is suggested for hydrogen sulfide assimilation in the chemosynthesis process involving sulfur bacteria. To shift the hydrogen sulfide decomposition equilibrium toward the target product (hydrogen), it is suggested that the reaction should be conducted at room temperature as a three-phase process over a solid catalyst under a layer of a solvent that can dissolve hydrogen sulfide and sulfur. In this case, it is possible to attain an H₂S conversion close to 100%. Therefore, hydrogen sulfide can be considered as an inexhaustible source of hydrogen, a valuable chemical and an environmentally friendly energetic product.     

Chemisorption of hydrogen sulfide on lead sulfide

The hydrogen sulfide chemisorption on lead sulfide at 22–100°C is studied by static testing in a vacuum and by pulsed chromatography. It is established that H₂S is sorbed in reversible and irreversible forms and that the process is accompanied by the sample charging. Irreversibly sorbed hydrogen sulfide is removed by heating the sample in a vacuum or in an inert-gas stream at temperatures exceeding the adsorption temperature by 30–50°C.     

纳米MgO催化发光检测硫化氢

研究了硫化氢在纳米Mg O表面的催化发光现象,发现纳米Mg O对硫化氢具有较好的特异性,据此设计了硫化氢催化发光传感器。通过优化设计建立了一种快速检测硫化氢的新方法,线性范围为2.00~200ppm(r=0.999 3),检出限为0.8 ppm(信噪比S/N=3)。采用此传感器进行人工合成样品中硫化氢的加标回收分析,回收率为88.4%~97.2%。此传感器具有灵敏、快速、操作简便等优点,在硫化氢快速检测领域具有潜在应用前景。该文还探讨了硫化氢的催化发光反应机理。     

Hydrogen sulfide as a source of hydrogen production

Potentialities and perspectives of using the known processes of hydrogen sulfide decomposition (thermal, plasmochemical, electrochemical, and photochemical) to produce hydrogen are examined. The results of theoretical and experimental studies of hydrogen sulfide dissociation on the surface of single crystals are presented. The data on the low-temperature decomposition of H₂S on the sulfide and metal catalysts are discussed. The electronic structure of diatomic sulfur and thermodynamics of its formation in the processes of H₂S decomposition are considered. The decomposition of hydrogen sulfide on the heterogeneous catalysts placed under the solvent layer is shown to be promising. The mechanism of assimilation of hydrogen sulfide by colorless sulfur bacteria is proposed.     

A Novel QCM-based Biosensor for Detection of Microorganisms Producing Hydrogen Sulfide

Abstract

A novel piezoelectric quartz crystal microbalance (QCM) device with gas permeable membrane is proposed for the detection of microorganisms producing hydrogen sulfide (H₂S). The detection theory is based on the adsorption of hydrogen sulfide onto the silver electrode of the piezoelectric crystal sensor, which causes a dramatic decrease in the resonant frequency of QCM. A 100 Hz frequency shift is chosen as the criteria value to judge the presence of microorganisms producing H₂S. Factors affecting detection were investigated. Desiccant is of great practical importance in sensor response. This new biosensor can be a potential candidate for detecting bacteria which produce hydrogen sulfide.     

Sulfide Ion-Selective Electrode as Potentiometric Sensor for Lead(II) Ion in Aqueous and Nonaqueous Medium

Abstract

The possibilities of a sulfide ion-selective electrode (SISE) for the determination of lead(II) at different pH values is presented. Potential - time curves recorded after addition of lead(II) in sulfide solution constitute the primary data in this study. The influence of the pH and ethanol in ethanol-aqueous mixtures on the behaviour of a SISE and on formation of PbS was investigated. A relationship between the initial rate of decrease of the sulfide concentration in test solution and various amounts of lead(II) is discussed. The results of measurements showed the possibility of determining up to micromole quantities of lead(II).     

Decomposition of Gaseous Sulfide Compounds in Air by Pulsed Corona Discharge

The effectiveness of applying a pulsed corona discharge to the destruction of olfactory pollution in air was investigated. This paper presents a comparative study of the decomposition of three representative sulfide compounds in diluted concentrations: hydrogen sulfide (H₂S), dimethyl sulfide (DMS), and ethanethiol (C₂H₅SH), which could be completely removed when a sufficient but reasonable energy density was deposited in the gas. DMS showed the lowest energy cost (around 30 eV/molecules); C₂H₅SH and H₂S had an EC of respectively 45 eV and 115 eV. The efficiency of the non-thermal plasma process increased with decreasing the initial concentration of sulfide compounds, while the energy yield remained almost unchanged. SO₂ was the only identified byproduct of H₂S decomposition, but the sulfur balance suggests the formation of undetected SO₃. The byproducts analyzed during the degradation of DMS and C₂H₅SH enabled to propose a reaction mechanism, starting with radical attack and breaking of C–S bonds.     

Chemical sensors based on a hydrochemically deposited lead sulfide film for the determination of lead in aqueous solutions

Chemical sensors for determining lead in aqueous solutions are developed based on hydrochemically deposited lead sulfide (PbS) films; their composition and surface morphology are studied. The sensors are sensitive to lead to 31.5–32.5 mV/pc _Pb with the limit of detection of the metal 1.5 × 10^–8 M. The role of photoactivation and doping of films in increasing the sensitivity of the film sensor to lead is determined. The studied chemical sensors can be relatively easily regenerated by soaking in distilled water for 10–30 min; they have sufficiently high selectivity to lead in the presence of sodium, nickel, zinc, and cadmium salts in solution.     

基于硫堇掺杂的聚乙烯醇薄膜的光波导传感器检测硫化氢气体

采用旋转甩涂法将硫堇掺杂的聚乙烯醇薄膜固定在K⁺交换玻璃光波导表面,研制出一种高灵敏硫化氢气体传感器。 传感膜与硫化氢(H₂S)气体作用时,薄膜颜色从紫色变为无色,从而降低薄膜对倏逝波的吸收,使传感器的输出光强度（信号）增强。 采用流动注射法对H₂S气体进行检测。 实验结果表明,H₂S传感器对浓度在0.14~56 mg/m3范围的H₂S气体具有良好的线性响应（r=0.99667）,检出限为0.11 mg/m³(S/N=3),相对标准偏差为4.0%,响应时间（t90）＜2 s。 该传感器具有灵敏度高、响应快、可逆性和重复性好等特点。     

Synthesis,structural and electrical characterization of PbS NCs in titania sol–gel films

Nanocrystals of lead sulfide were grown in TiO₂ (titania) thin films prepared by a sol-gel process. The synthetic procedure as well as the structural, optical, and electrical properties of the films are demonstrated. The structures and morphology of PbS nanocrystals were analyzed using HRTEM, SAED, AFM, HRSEM, XRD and EDAX elemental analysis technique. When the concentration of PbS in the titania matrix is 20 mol%, PbS NCs with a diameter of 2.0 nm are created. At a higher PbS concentration (> 40 mole%) in the titania matrix, PbS NCs and PbS clusters are created not only within the TiO₂ film but also on the external surface of the TiO₂ film. By increasing the PbS concentration up to 50 mol%, PbS nanocrystals of 6–8 nm in diameter are formed within the titania film and PbS clusters with a base size of about 100 nm² and a height up to about 20 nm were self assembled on the external surface of TiO₂ film. Quantum size effect and band gap energies were obtained from shifts of the absorption edge. For electrical measurements, PbS–TiO₂ films were deposited on an ITO/glass substrate, and then covered with gold contact. The electrical properties of ITO/PbS NCs–TiO₂/Au and ITO/PbS NCs–TiO₂/PbS cluster/Au structures were studied. I–V characteristics of the one layer structure are nearly linear and symmetric, while those of the two-layer structure exhibit rectifying behavior.     

Influence of Gas Components on the Formation of Carbonyl Sulfide over Water-Gas Shift Catalyst B303Q

Water-gas shift reaction catalyst at lower temperature (200—400℃) may improve the conversion of carbon monoxide. But carbonyl sulfide was found to be present over the sulfided cobalt-molybdenum/alumina catalyst for water-gas shift reaction. The influences of temperature, space velocity, and gas components on the formation of carbonyl sulfide over sulfided cobalt-molybdenum/alumina catalyst B303Q at 200—400℃were studied in a tubular fixed-bed quartz-glass reactor under simulated water-gas shift conditions. The experimental results showed that the yield of carbonyl sulfide over B303Q catalyst reached a maximum at 220℃with the increase in temperature, sharply decreased with the increase in space velocity and the content of water vapor, increased with the increase in the content of carbon monoxide and carbon dioxide, and its yield increased and then reached a stable value with the increase in the content of hydrogen and hydrogen sulfide. The formation mechanism of carbonyl sulfide over B303Q catalyst at 200—400℃was discussed on the basis of how these factors influence the formation of COS. The yield of carbonyl sulfide over B303Q catalyst at 200-400℃was the combined result of two reactions, that is, COS was first produced by the reaction of carbon monoxide with hydrogen sulfide, and then the as-produced COS was converted to hydrogen sulfide and carbon dioxide by hydrolysis. The mechanism of COS formation is assumed as follows: sulfur atoms in the Co9S8-MOS2/Al2O3 crystal lattice were easily removed and formed carbonyl sulfide with CO, and then hydrogen sulfide in the water-gas shift gas reacted with the crystal lattice oxygen atoms in CoO-MoO3/Al2O3 to form Co9S8-MoS2/Al2O3. This mechanism for the formation of COS over water-gas shift catalyst B303Q is in accordance with the Mars-Van Krevelen's redox mechanism over metal sulfide.     

Use of Dithiasuccinoyl-Caged Amines Enables COS/H2S Release Lacking Electrophilic Byproducts

The enzymatic conversion of carbonyl sulfide (COS) to hydrogen sulfide (H₂S) by carbonic anhydrase has been used to develop self-immolating thiocarbamates as COS-based H₂S donors to further elucidate the impact of reactive sulfur species in biology. The high modularity of this approach has provided a library of COS-based H₂S donors that can be activated by specific stimuli. A common limitation, however, is that many such donors result in the formation of an electrophilic quinone methide byproduct during donor activation. As a mild alternative, we demonstrate here that dithiasuccinoyl groups can function as COS/H₂S donor motifs, and that these groups release two equivalents of COS/H₂S and uncage an amine payload under physiologically relevant conditions. Additionally, we demonstrate that COS/H₂S release from this donor motif can be altered by electronic modulation and alkyl substitution. These insights are further supported by DFT investigations, which reveal that aryl and alkyl thiocarbamates release COS with significantly different activation energies.     

Electrochemical intercalation reaction of lithium into sulfides of nonlayer structure: I. Lithium intercalation in lead sulfide

The reaction mechanism of cell Li/PbS has been studied with coulombic titration, cyclic voltammetry and X-ray diffraction methods. It was found that in the first stage of discharge (0< y ≤1.5), the intercalation of lithium into lead sulfide took place. The X-ray diffraction patterns showed that the main crystalline structure of PbS remained unchanged after lithiation, and the lithium intercalated probably locates in the center of the cubic-interspace of the crystal. The intercalation free energy of Li into PbS forming LiPbS was found to be ?300.48 KJ·mol^?1 (at 25°C). The chemical diffusion coefficient of lithium in Li_yPbS (0<y≤1) was determined by electrochemical method to be about 10^?11 cm²S-1.     

Sulfide ion electrooxidation catalysed by cobalt phthalocyanine microcrystals

Electrooxidation of sulfide ion catalysed by microcrystals of cobalt phthalocyanine was investigated by cyclic voltammetry in 0.5M KNO₃ at pH 9.22. Traces of catalyst were immobilized at the surface of a paraffin-impregnated graphite electrode by the mechanical transfer of its powder. The electro-oxidation of HS^– proceeds in two irreversible steps, with the first peak between 0 V and –0.12 V and the second at 0.17 V. The first step is second order in HS^– and its product is the adsorbed disulfide, which may further dissociate to give adsorbed sulfur atoms. The reduction of sulfur occurs at –0.1 V.     

多相光催化分解H2S中阴离子表面活性剂对半导体催化剂CdS表面的影响

研究了在H₂S碱性溶液中,CdS粉末催化剂存在时,光催化分解H₂S释氢和生成硫反应。考察了阴离子表面活性剂——十二烷基硫酸钠(SDS)对催化剂的表面性质和催化活性的影响。通过模拟该反应体系,用电化学方法测定了单晶CdS电极在上述反应体系中加入SDS(浓度低于临界胶团浓度CMC值)后的平带电位的变化。结果表明:单晶CdS电极的平带电位,由于该体系加入SDS而正移,与n型多晶半导体CdS在加入SDS的H₂S碱性溶液中,光催化分解H₂S的释氢量减少相一致。并探讨了在该体系中,由于表面活性剂的阴离子与S^2-在单晶CdS电极表面上的竞争吸附,而引起单晶CdS电极的平带电位正移。     

Kinetic behavior of benzene hydrogenation and thiophene hydrogenolysis on sulfide Ni-Mo/Al2O3 catalyst

Summary An unsteady-state kinetic model of both benzene hydrogenation (HDA) and thiophene hydrogenolysis (HDS) on a sulfide hydrotreating catalyst Ni-Mo/Al₂O₃ has been developed. The model adequately describes experimental data obtained at the pressure 2 MPa, temperature 573 K and at various contact times and ratios of benzene/thiophene. The model is based on the assumption that the catalyst surface contains only one type of active sites, i.e., Ni atoms in the sulfide bimetallic species, which are responsible for both hydrogenolysis and hydrogenation reactions.     

Reactions of Group V Metal Atoms with Hydrogen Sulfide:Argon Matrix Infrared Spectra and Theoretical Calculations

The reaction of laser-ablated vanadium, niobium and tantalum atoms with hydrogen sulfide has been investigated using matrix isolation FTIR and theoretical calculations. The metal atoms inserted into the H-S bond of H₂S to form the HMSH molecules (M=V, Nb, Ta), which rearranged to H₂MS molecules on annealing for Nb and Ta. The HMSH molecule can also further react with another H₂S to form the H₂M(SH)₂ molecules. These new molecules were identified on the basis of the D₂S and H₂³⁴S isotopic substitutions. DFT (B3LYP and BPW91) theoretical calculations are used to predict energies, geometries, and vibrational frequencies for these novel metal dihydrido complexes and molecules. Reaction mechanism for formation of group V dihydrido complex was investigated by DFT internal reaction coordinate calculations. The dissociation of HVSH gave VS+H₂ on broad band irradiation and reverse reaction happened on annealing. Based on B3LYP calculation releasing hydrogen from HVSH is endothermic only by 13.5 kcal/mol with lower energy barrier of 16.9 kcal/mol.     

以无机硫为原料制备硫化铅量子点及其表征

根据高温下快速成核低温下慢速生长的量子点制备原理, 采用胶体化学的方法成功制备了不同粒径的硫化铅半导体量子点. 这种方法的特点是以无味和低毒的硫化钠作为制备硫化铅量子点硫的前驱物, 因此这是一种量子点的绿色化学合成方法. 油酸作为稳定剂控制硫化铅的粒径. 采用X射线衍射和高分辨透射电镜表征了量子点的晶体结构、形貌和粒径, 采用可见-近红外吸收光谱研究了硫化铅量子点的量子尺寸效应. 通过降低油酸的添加量可以促进量子点的生长, 得到较大粒径量子点. 并探讨了量子点的生长机理.     

Effect of the calcination temperature on the properties of Fe2O3/SiO2 catalysts for oxidation of hydrogen sulfide

The effect of the calcination temperature on the properties of supported iron oxide catalysts for hydrogen sulfide oxidation prepared by impregnation of silica with iron(III) nitrate has been studied. An increase in the calcination temperature was found to diminish the catalytic activity of the Fe₂O₃/SiO₂ catalysts in hydrogen sulfide oxidation. This behavior can be explained by the agglomeration of iron oxide particles and by a decrease in the surface concentration of active sites. It has been shown that an increase in the calcination temperature makes the catalyst more stable towards the sulfidation of the active component (Fe₂O₃) to the iron disulfide phase.     

Electrochemical Sensors for Sulfur- and Lead-Containing Gases: Effect of Nonstoichiometry of Measuring Electrodes

In accordance with the fact that the region of homogeneity of lead sulfide is two-sided, i.e. it includes compositions with both sulfur excess and lead excess relative to the stoichiometric composition, it is shown that a sensor with a Pb_{1 ±} S measuring electrode (ME) may be used for analyzing both sulfur- and lead-containing media. The general principle of operation of electrochemical sensor Me, Pb/PbCl₂–CaCl₂/Pb_{1 ±} S, is based on measuring EMF of an electrochemical circuit with a lead-conducting electrolyte at a specified sulfur vapor pressure above the reference electrode. At a fixed temperature, the cell's EMF is uniquely defined by the sulfur content on ME. The studies are done in the temperature interval 285 to 300°C where characteristics of the solid electrolyte used are optimum; its upper boundary is limited by mp of the lead reference electrode (327°). The interval of determinable concentrations of sulfur- and lead-containing gases is 10^–1 to 10^–9 vol %. If analysis is performed in a dynamic mode (in a carrier gas flow), the limiting stage is the adsorption of gas molecules on the ME surface and the sensor sensitivity increases after modifying the surface by various techniques and also due to the ME composition altering only in a surface layer. The sensor's working characteristics are affected mostly by the degree of deviation of the ME material from stoichiometry.