Poly(methyl methacrylate) CE microchips replicated from poly(dimethylsiloxane) templates for the determination of cations

A novel method for the rapid fabrication of poly(methyl methacrylate) (PMMA) microfluidic chips using poly(dimethylsiloxane) (PDMS) templates has been demonstrated. The PDMS molds were fabricated by soft lithography. The dense prepolymerized solution of methyl methacrylate containing thermal and UV initiators was allowed to polymerized between a PDMS template and a piece of a 1 mm thick commercial PMMA plate under a UV lamp. The images of microchannels on the PDMS template were precisely replicated into the synthesized PMMA substrates during the UV-initiated polymerization of the prepolymerized solution on the surface of the PMMA plate at room temperature. The polymerization could be completed within 10 min under ambient temperature. The chips were subsequently assembled by thermal bonding of the channel plate and the cover sheet. The new fabrication method obviates the need for specialized replication equipment and reduces the complexity of prototyping and manufacturing. Nearly 20 PMMA chips were replicated using a single PDMS mold. The attractive performance of the new microfluidic chips has been demonstrated by separating and detecting cations in connection with contactless conductivity detection. The fabricated PMMA microchip has also been successfully employed for the determination of potassium and sodium in environmental and biological samples.     

Studies on Poly(Methyl Methacrylate) (PMMA) and Thermoplastic Polyurethane (TPU) Blends

Blends of poly(methyl methacrylate) (PMMA) and thermoplastic polyurethane (TPU) in different compositions viz., 95/5, 90/10, 85/15 and 80/20 (by wt/wt, % of PMMA/TPU) were blended by melt mixing using a twin‐screw extruder. All the PMMA/TPU blends have been characterized for physico‐mechanical properties such as density, melt flow index, tensile behavior and izod impact strength. The impact strength of the PMMA/TPU blends were found to increase significantly with an increase in the percentage of TPU up to 20%, by retaining the tensile strength of PMMA. The effect of chemical aging on the performance of blends has been studied.     

Fabrication of poly(methyl methacrylate) microfluidic chips by redox-initiated polymerization

In this report, a method based on the redox-initiated polymerization of methyl methacrylate (MMA) has been developed for the rapid fabrication of poly(methyl methacrylate) (PMMA) microfluidic chips. MMA containing 2-2'-azo-bis-isobutyronitrile was allowed to prepolymerize in a water bath to form a viscous prepolymer solution that was subsequently mixed with MMA containing a redox-initiation couple of benzoyl peroxide/N,N-dimethylaniline. The dense molding solution was sandwiched between a silicon template and a piece of 1-mm-thick PMMA plate. The polymerization could complete within 50 min under ambient temperature. The images of raised microfluidic structures on the silicon template were precisely replicated into the synthesized PMMA substrate during the redox-initiated polymerization of the molding solution. The chips were subsequently assembled by the thermal bonding of the channel plates and the covers. The new fabrication approach obviates the need for special equipment and significantly simplifies the process of fabricating PMMA microdevices. The attractive performance of the novel PMMA microchips has been demonstrated in connection with contactless conductivity detection for the separation and detection of ionic species.     

Plasticizer-assisted bonding of poly(methyl methacrylate) microfluidic chips at low temperature

As an important phthalate plasticizer, dibutyl phthalate (DBP) was employed to decrease the bonding temperature of poly(methyl methacrylate) (PMMA) microfluidic chips in this work based on the fact that it can lower the glass transition temperature of PMMA. The channel plates of the PMMA microchips were fabricated by the UV-initiated polymerization of prepolymerized methyl methacrylate between a silicon template and a PMMA plate. Prior to bonding, DBP solution in isopropanol was coated on PMMA covers. When isopropanol in the coating was allowed to evaporate in air, DBP was left on the PMMA covers. Subsequently, the DBP-coated covers were bonded to the PMMA channel plates at 90 °C for 10 min under pressure. The channels in the complete microchips had been examined by optical microscope and scanning electron microscope. The results indicated that high quality bonding was achieved below the glass transition temperature of PMMA (∼105 °C). The performance of the PMMA microfluidic chips sealed by plasticizer-assisted bonding has been demonstrated by separating and detecting ionic species by capillary electrophoresis in connection with contactless conductivity detection.     

PMMA/黑云母纳米复合材料的制备及表征

采用乳液聚合法制备了聚甲基丙烯酸甲酯 黑云母 (PMMA VMT)纳米复合材料 ,其中的黑云母经甲基丙烯酰氧乙基三甲基氯化铵有机改性 ,所得复合材料经XRD、FT IR、DSC、TG等测试结果证明云母已经被有效的剥离 ,复合材料的耐热性能、玻璃化转变温度 (Tg)比PMMA都有所提高 ,但聚合反应速率有所下降 ,复合材料中可萃取的聚合物粘均分子量升高 .     

Fabrication and characterization of poly(methylmethacrylate) microfluidic devices bonded using surface modifications and solvents

The fabrication of polymer microchips allows inexpensive, durable, high-throughput and disposable devices to be made. Poly(methylmethacrylate) (PMMA) microchips have been fabricated by hot embossing microstructures into the substrate followed by bonding a cover plate. Different surface modifications have been examined to enhance substrate and cover plate adhesion, including: air plasma treatment, and both acid catalyzed hydrolysis and aminolysis of the acrylate to yield carboxyl and amine-terminated PMMA surfaces. Unmodified PMMA surfaces were also studied. The substrate and cover plate adhesion strengths were found to increase with the hydrophilicity of the PMMA surface and reached a peak at 600 kN m(-2) for plasma treated PMMA. A solvent assisted system has also been designed to soften less than 50 nm of the surface of PMMA during bonding, while still maintaining microchannel integrity. The extent to which both surface modifications and solvent treatment affected the adhesion of the substrate to the cover plate was examined using nanoindentation methods. The solvent bonding system greatly increased the adhesion strengths for both unmodified and modified PMMA, with a maximum adhesion force of 5500 kN m(-2) achieved for unmodified PMMA substrates. The bond strength decreased with increasing surface hydrophilicity after solvent bonding, a trend that was opposite to what was observed for non-solvent thermal bonding.     

Free volume holes diffusion to describe physical aging in poly(mehtyl methacrylate)/silica nanocomposites

The spontaneous thermodynamically driven densification, the so-called physical aging, of glassy poly(mehtyl methacrylate) (PMMA) and its nanocomposites with silica has been described by means of the free volume holes diffusion model. This mechanism is able to account for the partial decoupling between physical aging and segmental dynamics of PMMA in nancomposites. The former has been found to be accelerated in PMMA/silica nanocomposites in comparison to "bulk" PMMA, whereas no difference between the segmental dynamics of bulk PMMA and that of the same polymer in nanocomposites has been observed. Thus, the rate of physical aging also depends on the amount of interface polymer/nanoparticles, where free volume holes disappear after diffusing through the polymer matrix. The free volume holes diffusion model is able to nicely capture the phenomenology of the physical aging process with a structure dependent diffusion coefficient.     

Fabrication of poly(methyl methacrylate) capillary electrophoresis microchips by in situ surface polymerization

A novel method based on in situ surface polymerization of methyl methacrylate (MMA) has been developed for the rapid fabrication of poly(methyl methacrylate) (PMMA) capillary electrophoresis (CE) microchips. MMA containing both thermal and ultraviolet (UV) initiators was allowed to prepolymerize in a water bath to form a fast curing molding solution that was subsequently sandwiched between a nickel template and a PMMA plate. The images of the raised microchannels on the nickel template were precisely replicated into the synthesized PMMA substrates during the UV-initiated polymerization of the molding solution within 30 min under ambient temperature. The attractive performances of the novel PMMA microchips have been demonstrated in connection with amperometric detection for the separation and detection of several model analytes. The new approach significantly simplifies the process for fabricating PMMA devices and could be applied to other materials that undergo light-initiated polymerization.     

Vacuum-assisted thermal bonding of plastic capillary electrophoresis microchip imprinted with stainless steel template

An improved fabrication of poly(methyl methacrylate) (PMMA)-based capillary electrophoresis microchips has been demonstrated. The microchannel structures on PMMA substrates were generated by one-step hot embossing procedure using a stainless steel template. Hundreds of patterned PMMA substrates have been successfully obtained using the single metal template. Sequent microchannel enclosure with high yield up to 90% was accomplished by a vacuum-assisted thermal bonding method. The results of profilometric scanning of separated substrates showed the dimensions of the channels were well preserved during the bonding process. Finally, analytical functionalities of these PMMA microchips were demonstrated by performing fast electrophoretic separations and high sensitive end-column amperometric detections of dopamine and catechol. The entire fabrication methodology may also be useful for preparation of other thermoplastic microfluidic systems.     

纳米LDH作为热稳定剂在PMMA中的应用

水滑石;;聚甲基丙烯酸甲酯;热稳定性;纳米LDH作为热稳定剂在PMMA中的应用     

Uniaxial drawing of poly(ethyleneoxide)/poly(methyl methacrylate) blends by solid-state extrusion

Ultradrawn ribbons of solution-cast blends of poly(ethylene oxide) (PEO)/poly(methyl methacrylate) (PMMA) have been prepared by a solid-state coextrusion in a capillary rheometer. An increase of noncrystallizable PMMA in the blends drastically decreased the drawability from a draw ratio of 36 for pure PEO to 5 for a mixture of PEO/PMMA 40/60% by weight. A low crystallinity and depression of melting temperature for PEO were observed with increasing draw. The Flory-Huggins theory for melting temperature depression has been used to derive the binary interaction parameter for these blends.     

Understanding the Miscibility and Morphology of Poly(methyl methacrylate) and Styrenic Copolymer Blends of Tunable Domain Sizes

In the present study, we have investigated the miscibility, morphology and mechanical behavior of poly(methyl methacrylate) (PMMA) blends with a series of poly(styrene-co-maleic anhydride) (SMA) copolymers containing varying amounts of maleic anhydride (MA) content (from 8 to 26%). The experimental findings have been substantiated by the modeling studies to gain fundamental understanding of the observed phenomena with respect to the miscibility of the PMMA and SMA blends of a given MA content. The morphological differences, molecular weights, domain sizes and mechanical behavior of the blends at a given ratio of PMMA and copolymers have been investigated and a correlation has been made between the morphological understanding to the molecular weights and mechanical properties. The results indicate that the PMMA/SMA blends are miscible only at a certain MA content providing transparent PMMA/SMA blends without affecting any of the enabling properties of PMMA that are of commercial interest through a facile melt mixing process. The surface hardness and % recovery (nano-indentation) of these blends were evaluated as well to gain fundamental understanding of the surface characteristics and mechanicals of the blends.     

Construction of ternary phase diagrams in nonsolvent/solvent/PMMA systems

In this work, the ternary phase diagrams in three nonsolvent/solvent/PMMA systems (n-hexane/n-butyl acetate/PMMA, water/acetone/PMMA, and n-hexane/acetone/PMMA) were constructed by theoretical calculation and experimental measurement. Binodal curves were calculated by using the Flory–Huggins theory for three-component systems and measured by titrating the PMMA solution with nonsolvent until the onset of turbidity. By using concentration-dependent nonsolvent/solvent and solvent/PMMA interaction parameters and constant nonsolvent/PMMA interaction parameters, good agreement has been obtained between the calculation and the measurement. The values of nonsolvent/solvent interaction parameters were taken from the literature sources, and the values of solvent/PMMA and nonsolvent/PMMA interaction parameters were measured by vapor sorption and swelling equilibrium, respectively. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 607–615, 1998     

Ionic species in γ-irradiated poly(methyl methacrylate) at 77°K

Ionic species in poly(methyl methacrylate) (PMMA) have been studied by optical absorption and ESR spectrometry. γ-Irradiation of PMMA containing aromatic solutes gave rise to the absorption spectra of corresponding cation radicals. The G value for the formation of cation radicals was determined to be 1.5. Anionic radicals of the solutes were not detected for the aromatic solutes studied. Anionic species of pure PMMA were identified by both absorption spectra and ESR spectra. It has an absorption maximum at 440 nm. A sharp singlet with a line width of about 5 G which was found by ESR spectrometry was tentatively assigned to the trapped electron of PMMA. The results show that a large number of electron traps in PMMA may exist on the ester side chain themselves.     

Transparent poly(methyl methacrylate)/TiO<Subscript>2</Subscript> nanocomposites for UV-shielding applications

Transparent poly(methyl methacrylate) (PMMA)/TiO₂ nanocomposites have been prepared by solution mixing PMMA with organically soluble titania xerogel. The organically soluble titania xerogel in the form of amorphous phase has been synthesized via a simple sol-gel method, involving hydrolysis of tetrabutyl titanate (TBT) in trifluoroacetic acid (TFA) and gelation. The obtained PMMA/TiO₂ nanocomposites were characterized by Fourier transform infrared spectroscopy (FTIR), transmission electron microscope (TEM), thermogravimetry (TG) and ultraviolet-visible (UV-vis) absorption spectroscopy. The results showed that the interaction between titania nanoparticles and PMMA macromolecular chains led to a homogeneous dispersion of TiO₂ in PMMA matrix. The resulting PMMA/TiO₂ nanocomposites showed improved thermal stability, high transparency and high UV-shielding efficiency with a small amount of titania xerogel (≤3.0 wt %). The present work is of interest for developing a series of transparent UV-shielding nanocomposites.     

Effect of needle diameter on nanofiber diameter and thermal properties of electrospun poly(methyl methacrylate)

The effect of needle diameter on the resulting electrospun poly(methyl methacrylate) (PMMA) average nanofiber diameter has been evaluated for three different needle gauges. The resulting nanofibers were observed and analyzed by scanning electron microscopy (SEM), suggesting a lack of correlation between the needle diameter used and the resulting average nanofiber diameter. Thermogravimetric analysis (TGA) indicated an increase in the thermal stability of PMMA nanofibers when compared to powdered PMMA, while differential scanning calorimetry (DSC) studies evidenced lower glass transition temperatures (Tg) for PMMA nanofibers in the first heating cycle. Copyright © 2007 John Wiley & Sons, Ltd.     

Surface structures and properties of polystyrene/poly(methyl methacrylate) blends and copolymers

Sum frequency generation (SFG) vibrational spectroscopy has been applied to study the molecular surface structures of polystyrene (PS)/poly(methyl methacrylate) (PMMA) blends and the copolymer between PS and PMMA (PS-co-PMMA) in air, supplemented by atomic force microscopy (AFM) and contact angle goniometer. Both the blend and the copolymer have equal weight amounts of the two components. SFG results show that both components, PS and PMMA, can segregate to the surface of the blend and the copolymer before annealing, although PMMA has a slightly higher surface tension. Upon annealing both SFG results and contact angle measurements indicate that the PS segregates to the surface of the PS/PMMA blend more but no change occurs on the PS-co-PMMA surface. AFM images show that the copolymer surface is flat but the 1:1 PS/PMMA blend has a rougher surface with island like domains present. The annealing effect on the blend surface morphology has also been investigated. We collected amide SFG signals from interfacial fibrinogen molecules at the copolymer or blend/protein solution interfaces as a function of time. Different time-dependent SFG signal changes have been observed, showing that different surfaces of the blend and the copolymer mediate fibrinogen adsorption behavior differently.     

Ordered structures of stereoregular poly(methyl meth-acrylates) in solutions studied by spectroscopic methods

Three groups of problems concerning ordered structures in solutions of stereoregular poly(methyl meth-acrylates) (PMMA) were studied by spectroscopic methods: (i) Self-aggregation of syndiotactic (s) PMMA in solution was followed by means of NMR and IR spectroscopy; it has been established that double helices are formed during the initial stage of aggregation, and activation and equilibrium thermodynamic parameters (ΔH, ΔS) which characterize the transition coil–double helix in s-PMMA were determined. (ii) NMR spectroscopy has demonstrated that association in solutions of atactic PMMA proceeds via interactions of stereocomplex type (interaction between m-diads and r-tetrads). (iii) It has been found that ¹³C CP/MAS NMR spectra of crystalline forms of PMMA (prepared from aggregated solutions by solvent evaporation) conform to the double-helix structure of these systems.     

Electrophoresis microchips with sharp inlet tips, for contactless conductivity detection, fabricated by in-situ surface polymerization

A novel method based on in-situ surface polymerization of methyl methacrylate (MMA) has been developed for rapid fabrication of poly(methyl methacrylate) (PMMA) electrophoresis microchips with sharp inlet tips. Prepolymerized MMA containing an ultraviolet (UV) initiator was directly sandwiched between a nickel template and a PMMA plate. The image of the relief on the nickel template was precisely replicated in the synthesized PMMA layer on the surface of the commercially available PMMA plate during UV-initiated polymerization at room temperature. The chips were subsequently assembled by thermal bonding of channel plates and cover sheets. The sample was directly introduced into the separation channel through a sharp inlet tip, which was placed in the sample vial, without use of an injection cross. The attractive performance of the novel PMMA microchips has been demonstrated by using contactless conductivity detection for determination of several inorganic ions. Such rapid and simple sample introduction leads to highly reproducible signals with relative standard deviations of less than 5% for peak responses. These new approaches significantly simplify the process of fabricating PMMA devices and show great promise for high-speed microchip analysis.      

Synthesis and properties of organic-silica nanocomposites with perhydropolysilazane

The synthesis and properties of the organic polymer-silica nanocomposites by blending perhydropolysilazane with organic polymer having hydroxyl groups have been described. Poly(methyl methacrylate) (PMMA)-silica nanocomposites with a PMMA/silica lamellar structure and spherical silica domains in a PMMA matrix were obtained with random copolymers and block copolymers. The effect of the architecture of the random and block copolymers on the morphology of composites has been summarized. The thermal stability, electrical properties, such as field break down, leakage current, etc., and surface hardness of the composites have been discussed. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5174–5181, 2006