固相反应制备纳米CeO2粉体

氧化铈用途广泛,用量大。目前用氧化铈作为汽车尾气净化器助催化剂,细度和纯度直接影响的净化效率,因此需要加强高纯度纳米氧化铈的研究开发。     

Thermal behaviour of high surface area V2O5/TiO2 catalysts

Thermal analysis (TG and DTA) was employed for the characterization of V₂O₅/TiO₂ catalysts supported on high surface area TiO₂. The results obtained are consistent with a uniform spreading of vanadium oxide on TiO₂ surface for V₂O₅ content less than 15% by weight.The presence of V₂O₅ on the surface of TiO₂ affects the anatase-rutile phase transition lowering the temperature at which it occurs.DTA measurements, performed on catalysts after many months from the preparation, show the appearance of an exothermic peak in the range 280°–340°C. This signal has been related to the oxidation of V(IV) to V(V) on the catalyst surface.Catalysts characterization, performed by chemical analysis and FT-IR spectroscopy, has confirmed this interpretation.It has been suggested that a slow modification of the catalyst occurs, leading to an increase of the V(IV) content during the time.

---

Zusammenfassung Zur Charakterisierung von V₂O₅/TiO₂-Katalysatoren auf hochoberflächigem TiO₂ Trägermaterial wurde die Thermoanalyse (TG und DTA) angewendet. Für einen V₂O₅-Gehalt von weniger als 15 Gew.% entsprechen die erhaltenen Ergebnisse einer gleichmäßigen Verteilung des Vanadiumoxides an der TiO₂-Oberfläche.Die Gegenwart von V₂O₅ an der Oberfläche von TiO₂ beeinflußt die Anatas-Rutil-Phasenumwandlung, indem sie die zugehörige Temperatur verringert.DTA-Messungen an Katalysatoren mehrere Monate nach ihrer Herstellung zeigten das Auftreten eines exothermen Peaks im Bereich 280°–340°C. Dieses Signal wurde der Oxidation von V(IV) zu V(V) an der Katalysatoroberfläche zugeschrieben.Diese Interpretation konnte durch eine Charakterisierung des Katalysatoren durch chemische Analyse und FT-IR-Spektroskopie bestätigt werden.Es wurde angedeutet, daß der Katalysator mit der Zeit einer langsamen Modifikation unterliegt, die zu einem Ansteigen des V(IV)-Gehaltes führt.

     

Surface and adsorption studies of high surface area oxides

Modern FT-IR spectroscopy offers an ample potential for the study of adsorption and desorption processes on high surface area materials. Three examples will be presented here: (i) the thermal desorption of H₂O from SiO₂, (ii) the chemisorption and physisorption of H₂O on SiO₂, (iii) the interaction of NH₃ with OH groups on MgO surfaces.     

低温固相法制备高比表面积的纳米MgO

 以草酸和乙酸镁为原料,采用低温固相化学反应合成出前体MgC2O4·2H2O, 再通过焙烧得到纳米MgO. 采用X射线衍射、 N2物理吸附、透射电镜和热重-差热技术对前体和MgO样品进行了表征,并考察了焙烧气氛的影响. 结果表明,在流动干燥的氮气中520 ℃焙烧4 h后制得了比表面积高达412 m2/g的纳米MgO; 此MgO为面心立方结构,晶粒尺寸为4～5 nm, 粒子堆积成在一定程度上长程有序的介孔结构,并具有十分优良的抗高温烧结性能, 600和800 ℃焙烧2 h后,其比表面积仍分别高达357和153 m2/g.     

Low-temperature heat capacities and thermodynamic properties of rare-earth triisothiocyanate hydrates (III) —Sm(NCS)3 · 6H2O, Gd(NCS)3 · 6H20, Yb(NCS)3 · 6H20 and Y(NCS)3 · 6H20

The heat capacities of four RE isothiocyanate hydrates, Sm(NCS)₃, · 6H₂0, Gd(NCS)₃ · 6H₂0, Yb(NCS)₃, · 6H₂O and Y(NCS)₃, · 6H₂0, have been measured from 13 to 300 K with a fully-automated adiabatic calorimeter. No obvious thermal anomaly was observed for the above-mentioned compounds in the experimental temperature ranges. The polynomial equations for calculating the heat capacities of the four compounds in the range of 13–300 K were obtained by the least-squares fitting based on the experimentalC _P, data. TheC _P, values below 13 K were estimated by using the Debye-Einstein heat capacity functions. The standard molar thermodynamic functions were calculated from 0 to 300 K. Gibbs energies of formation were also calculated. Project supported by the National Natural Science Foundation of China.     

Hydrothermal synthesis and thermodynamic properties of 2CaO·3B<Subscript>2</Subscript>O<Subscript>3</Subscript>·H<Subscript>2</Subscript>O

2CaO·3B₂O₃·H₂O which has non-linear optical (NLO) property was synthesized under hydrothermal condition and identified by XRD, FTIR and TG as well as by chemical analysis. The molar enthalpy of solution of 2CaO·3B₂O₃·H₂O in HCl·54.572H₂O was determined. From a combination of this result with measured enthalpies of solution of H₃BO₃ in HCl·54.501H₂O and of CaO in (HCl+H₃BO₃) solution, together with the standard molar enthalpies of formation of CaO(s), H₃BO₃(s), and H₂O(l), the standard molar enthalpy of formation of −(5733.7±5.2) kJ mol⁻¹ of 2CaO·3B₂O₃·H₂O was obtained. Thermodynamic properties of this compound were also calculated by a group contribution method.     

Synthesis g-C3N4 of high specific surface area by precursor pretreatment strategy with SBA-15 as a template and their photocatalytic activity toward degradation of rhodamine B

Using SBA-15 as a template, high surface area porous graphitic carbon nitrides (g-C₃N₄) were successfully synthesized by pretreating melamine using hydrochloric acid, and fully characterized by Fourier-Transform infrared (FT-IR), X-ray diffraction (XRD), scanning electron micrographs (SEM), N₂ adsorption-desorption, ultraviolet-visible (UV-Vis) spectroscopy, photoluminescence (PL) spectrum. The results of these analyses indicated that the g-C₃N₄ synthesized from HCl-pretreated melamine with SBA-15 as a template has enhanced specific surface area and increased the separation rate of the photogenerated electrons and holes compared with bulk g-C₃N₄, but didn’t change the structure of bulk g-C₃N₄. The photocatalytic activity of samples was evaluated by the degradation of rhodamine B (RhB) under xenon lamp. The results indicated that the activity was improved significantly with the increase of specific surface area. The rate constant for CN-3（HCl pretreatment melamine precursor and SBA-15 as a template） was 13 times as high as g-C₃N₄. Furthermore, the CN-3 catalyst exhibited outstanding structural and catalytic stability.     

Synthesis,characterization and thermal analysis of [Fe(N2H4)2(CH3COO)2]

[Fe(N₂H₄)₂(CH₃COO)₂] was synthesised and characterized for the first time by chemical analysis, magnetic measurements, electronic and IR spectral studies. Its thermal reactivity was ascertained by thermogravimetric (TG) and derivative thermogravimetric (DTG) techniques and it has been concluded that unlike some other metal carboxylate hydrazinates, it does not show any autocatalytic behaviour. The decomposition was also subjected to kinetic analysis using the equations of Coats-Redfern and Horowitz-Metzger by the method of weighted least-squares.     

Synthesis, thermal and calorimetric investigations of cobalt(ii) trihydrogen hexaoxoperiodate tetrahydrate

A new cobalt(II) trihydrogen hexaoxoperiodate tetrahydrate has been synthesized: CoH₃IO₆·4H₂O and has been characterized by quantitative analysis, TG, DTA, DSC and IR spectroscopy. Based on DTA and DSC data, a thermal decomposition scheme has been proposed for this complex.     

Synthesis,spectroscopic and thermal characterization of Co(II) tetrahydrogen hexaoxoiodate tetrahydrate

A new cobalt(II) tetrahydrogen hexaoxoiodate tetrahydrate Co(H₄IO₆)₂·4H₂O is prepared by crystallization from an acidic aqueous solution. This compound is identified by quantitative analysis, TG, DTA, DSC and IR spectra. A thermal decomposition scheme is proposed. Some phase transitions are identified and the corresponding enthalpy changes are determined.     

Etude de la deshydratation de Ca(H2PO4)2·H2O et de sa reaction avec CaSO4 par ATD-ATG couplees

The dehydration of Ca(H₂PO₄)₂·H₂O was examined with simultaneous DTA and TG. This dehydration permitted clearly the apparation of the following phases: Ca(H₂PO₄)₂·0.5H₂O, Ca(H₂PO₄)₂, Ca₃(HP₂O₇)₂, Ca₂HP₃O₁₀ et Ca(PO₃)₂. The reaction of Ca(H₂PO₄)₂·H₂O and CaSO₄ was also examined with the same technics. It was found that the decomposition of CaSO₄ takes place for relatively low temperature (between 600°C and 800°C).     

Recent developments in the preparation of high surface area metal fluorides

An overview of the main procedures for the preparation of fluorides with very high surface areas is given. Three processes are outlined: (i) plasma fluorination, (ii) sol–gel route and (iii) oxidative decomposition of inorganic precursors. From all three processes nanostructured metal fluorides with 100–400 m² g⁻¹ can be obtained. Prevention of the local overheating during fluorination seems to be the key factor to obtain the high surface area fluorides. TEM investigations of AlF₃ and CrF₃ obtained by oxidative decomposition revealed considerable differences in their morphologies and crystallinity. CrF₃ is completely amorphous and unstable under beam. AlF₃ contains an amorphous phase and nanocrystalline phases of α-AlF₃ and β-AlF₃. Nanocrystals are uniformly distributed within the amorphous phase. Also present are the rod-like nanostructures that consist of β-AlF₃ and are 5–10 nm wide.     

Synthesis of heteroaryl ketones via tandem reaction of 1,1-dibromoethenes

A novel method for the synthesis of heteroaryl ketones through one-pot tandem reaction of 1,1-dibromoethenes with 2-amino(thio)phenols promoted by TBAF·3H₂O and RuCl₃(5%)/air was developed. This novel method includes several reactions in one-pot and utilizes economical yet efficient reagents to generate synthetically and biologically interesting heteroaryl ketones under mild conditions with good efficiency.     

Cerium(III)-Catalyzed Synthesis of Schiff Bases: A Green Approach

The reaction of primary aromatic amines with aryl aldehydes is found to be catalyzed by cerium chloride heptahydrate under solvent-free conditions to give the corresponding Schiff bases in good yields.     

Synthesis of benzodiazocine-annulated heterocycles by the implementation of Pd-catalyzed intramolecular Heck reaction

Synthesis of hitherto unreported benzodiazocine-annulated heterocycles by the implementation of palladium-catalyzed intramolecular Heck reaction has been achieved in excellent yields.     

Zinc-containing zeolite catalysts for ethane aromatization prepared by solid-state modification

Solid-state modification was used to prepare zinc-containing zeolite catalysts based on pentasils with different framework SiO₂/Al₂O₃ ratios. The catalysts were studied by X-ray diffraction analysis and IR spectroscopy. The activity and selectivity of the Zn—pentasil systems prepared by the solid-state modification and impregnation methods were compared in the aromatization of ethane. The active and stable zeolite catalysts modified by transition metal ions can be obtained by the topochemical method.     

Synthesis and thermal investigation of Na2Cd(SO4)2·2H2O

The synthesis and thermal decomposition of Na₂(SO₄)₂·2H₂O in both air and nitrogen are described. The synthesis was performed by two different procedures, but in both cases the same product was obtained, corresponding to the general formula given above. The crystals obtained were investigated by methods of X-ray powder diffraction, and chemical and thermal analysis. The differences in thermal decomposition in air and nitrogen are discussed.     

Chemoselective Reduction and Transesterification of α-Keto Propargylic Esters Mediated by NaBH4 and CeCl3 · 7H2O

An efficient one-pot synthesis of α -hydroxy propargylic esters by chemoselective reduction followed by transesterification using NaBH₄ in combination with CeCl₃ · 7H₂O is described.

The effect of experimental methods and measurement conditions on values of the kinetic parameters of [Co(NH3)6]2(C2O4)3·4H2O

Using the thermal decomposition of [Co(NH₃)₆]₂(C₂O₄)₃·4H₂O as a basis, the paper presents results which show how computed values of kinetic parameters are influenced by experimental conditions (ambient atmosphere, sample mass, linear heating rate) when using the non-isothermal methods and the Coats-Redfern (CR) modified equation. It also illustrates the influence of the experimental methods i.e. non-isothermal and isothermal (conventional) methods and also a quasiisothermal-isobaric one which can be recognised as equivalent to Constant Rate Thermal Analysis (CRTA). The results obtained have confirmed the significant influence of the experimental parameters as well as that of the experimental method used on the estimated values of kinetic parameters. The correlation between activation energy (E) and sample mass (m) or heating rate (β) is generally of a linear nature:E=a+bx