Isomeric forms of divalent heavier group 14 element hydrides: characterization of Ar'(H)GeGe(H)Ar' and Ar'(H)(2)GeGeAr'.PMe(3) (Ar' = C(6)H(3)-2,6-Dipp(2); Dipp = C(6)H(3)-2,6-Pr(i)(2))

The reduction of Ar'GeCl (Ar' = C6H3-2,6-Dipp2; Dipp = C6H3-2,6-Pri2) with LiBH(Bus)3 affords the first heavier group 14 element dimetallene hydride Ar'(H)GeGe(H)Ar' which, upon further reaction with PMe3, yields the base-stabilized isomeric form Ar'(H)2GeGeAr'.PMe3.     

Structural diversity in solvated lithium aryloxides. Syntheses, characterization, and structures of [Li(OAr)(THF)x]n and [Li(OAr)(py)x]2 complexes where OAr = OC6H5, OC6H4(2-Me), OC6H3(2,6-(Me))2, OC6H4(2-Pr(i)), OC6H3(2,6-Pr(i)))2, OC6h4(2-Bu(t)), OC6H3(2,6-Bu(t)))2

A series of sterically varied aryl alcohols H-OAr [OAr = OC6H5 (OPh), OC6H4(2-Me) (oMP), OC6H3(2,6-(Me))2 (DMP), OC6H4(2-Pr(i)) (oPP), OC6H3(2,6-(Pr(i)))2 (DIP), OC6H4(2-Bu(t)) (oBP), OC6H3(2,6-(Bu(t)))2 (DBP); Me = CH3, Pr(i) = CHMe2, and Bu(t) = CMe3] were reacted with LiN(SiMe3)2 in a Lewis basic solvent [tetrahydrofuran (THF) or pyridine (py)] to generate the appropriate "Li(OAr)(solv)x". In the presence of THF, the OPh derivative was previously identified as the hexagonal prismatic complex [Li(OPh)(THF)]6; however, the structure isolated from the above route proved to be the tetranuclear species [Li(OPh)(THF)]4 (1). The other "Li(OAr)(THF)x" products isolated were characterized by single-crystal X-ray diffraction as [Li(OAr)(THF)]4 [OAr = oMP (2), DMP (3), oPP (4)], [Li(DIP)(THF)]3 (5), [Li(oBP)(THF)2]2, (6), and [Li(DBP)(THF)]2, (7). The tetranuclear species (1-4) consist of symmetric cubes of alternating tetrahedral Li and pyramidal O atoms, with terminal THF solvent molecules bound to each metal center. The trinuclear species 5 consists of a six-membered ring of alternating trigonal planar Li and bridging O atoms, with one THF solvent molecule bound to each metal center. Compound 6 possesses two Li atoms that adopt tetrahedral geometries involving two bridging oBP and two terminal THF ligands. The structure of 7 was identical to the previously reported [Li(DBP)(THF)]2 species, but different unit cell parameters were observed. Compound 7 varies from 6 in that only one solvent molecule is bound to each Li metal center of 7 because of the steric bulk of the DBP ligand. In contrast to the structurally diverse THF adducts, when py was used as the solvent, the appropriate "Li(OAr)(py)x" complexes were isolated as [Li(OAr)(py)2]2 (OAr = OPh (8), oMP (9), DMP (10), oPP (11), DIP (12), oBP (13)) and [Li(DBP)(py)]2 (14). Compounds 8-13 adopt a dinuclear, edge-shared tetrahedral complex. For 14, because of the steric crowding of the DBP ligand, only one py is coordinated, yielding a dinuclear fused trigonal planar arrangement. Two additional structure types were also characterized for the DIP ligand: [Li(DIP)(H-DIP)(py)]2 (12b) and [Li2(DIP)2(py)3] (12c). Multinuclear (6,7Li and 13C) solid-state MAS NMR spectroscopic studies indicate that the bulk powder possesses several Li environments for "transitional ligands" of the THF complexes; however, the py adducts possess only one Li environment, which is consistent with the solid-state structures. Solution NMR studies indicate that "transitional" compounds of the THF precursors display multiple species in solution whereas the py adducts display only one lithium environment.     

Synthesis and characterization of the homologous M-M bonded series Ar'MMAr' (M = Zn, Cd, or Hg; Ar' = C6H3-2,6-(C6H3-2,6-Pr(i)2)2) and related arylmetal halides and hydride species

The synthesis and structural characterization of the first homologous, molecular M-M bonded series for the group 12 metals are reported. The compounds Ar'MMAr' (M = Zn, Cd, or Hg; Ar' = C(6)H(3)-2,6-(C(6)H(3)-2,6-Pr(i)(2))(2)) were synthesized by reduction of the corresponding arylmetal halides by alkali metal/graphite (Zn or Hg) or sodium hydride (Cd). These compounds possess almost linear C-M-M-C core structures with two-coordinate metals. The observed M-M bonds distances were 2.3591(9), 2.6257(5), and 2.5738(3) A for the zinc, cadmium, and mercury species, respectively. The shorter Hg-Hg bond in comparison to that of Cd-Cd is consistent with DFT calculations which show that the strength of the Hg-Hg bond is greater. The arylmetal halides precursors (Ar'MI)(1 or 2), and the highly reactive hydrides (Ar'MH)(1 or 2), were also synthesized and fully characterized by X-ray crystallography (Zn and Cd) and multinuclear NMR spectroscopy. The arylzinc and arylcadmium iodides have iodide-bridged dimeric structures, whereas the arylmercury iodide, Ar'HgI, is monomeric. The arylzinc and arylcadmium hydrides have symmetric (Zn) or unsymmetric (Cd) mu-H-bridged structures. The Ar'HgH species was synthesized and characterized by spectroscopy, but a satisfactory refinement of the structure was precluded by the contamination of monomeric Ar'HgH by Ar'H. It was also shown that the decomposition of Ar'Cd(mu-H)(2)CdAr' at room temperature leads to the M-M bonded Ar'CdCdAr', thereby supporting the view that the reduction of the iodide proceeds via the hydride intermediate.     

Analysis of the putative Cr-Cr quintuple bond in Ar'CrCrAr' (Ar' = C6H3-2,6(C6H3-2,6-Pr(i)2)2 based on the combined natural orbitals for chemical valence and extended transition state method

The nature of the putative Cr-Cr quintuple bond in Ar'CrCrAr' (Ar' = C(6)H(3)-2,6(C(6)H(3)-2,6-Pr(i)(2))(2)) is investigated with the help of a newly developed energy and density decomposition scheme. The new approach combines the extended transition state (ETS) energy decomposition method with the natural orbitals for chemical valence (NOCV) density decomposition scheme within the same theoretical framework. The results show that in addition to the five bonding components (σ(2)π(2)π'(2)δ(2)δ'(2)) of the Cr-Cr bond, the quintuple bond is augmented by secondary Cr-C interactions involving the Cr-ipso-carbon of the flanking aryl rings. The presence of isopropyl groups (Pr(i)) is further shown to stabilize Ar'CrCrAr' by 20 kcal/mol compared to the two Ar'Cr monomers through stabilizing van der Waals dispersion interactions.     

Synthesis and characterization of 2,6-Dipp(2)-H(3)C(6)SnSnC(6)H(3)-2,6-Dipp(2) (Dipp = C(6)H(3)-2,6-Pr(i)(2)): a tin analogue of an alkyne

The reaction of Sn(Cl)C(6)H(3)-2,6-Dipp(2) (Dipp = C(6)H(3)-2,6-Pr(i)()(2)) with a stoichiometric amount of potassium in benzene affords 2,6-Pr(i)()(2)-H(3)C(6)SnSnC(6)H(3)-2,6-Pr(i)()(2) (1) as dark blue-green crystals. The compound 1 is a tin analogue of an alkyne. It was characterized by (1)H and (13)C NMR and UV-vis spectroscopy, cyclic voltammetry, combustion analysis and X-ray crystallography. The structural data show that 1 has a trans-bent, planar C(ipso)SnSnC(ipso) skeleton with a Sn-Sn bond distance of 2.6675(4) A and a Sn-Sn-C angle of 125.24(7) degrees. The Sn-Sn distance, which is ca. 0.15 A shorter than a conventional Sn-Sn single bond, and the trans-bent structure indicate the presence Sn-Sn multiple bond character unlike the related singly bonded ArPbPbAr species.     

Synthesis, structural characterization, and spectroscopy of the cadmium-cadmium bonded molecular species Ar'CdCdAr' (Ar' = C6H3-2,6-(C6H3-2,6-Pri2)2)

The synthesis and first structural characterization of a cadmium-cadmium bonded molecular compound Ar'CdCdAr' (Ar' = C6H3-2,6-(C6H3-2,6-Pri2)2) are reported. The existence of the Cd-Cd bond was established by 113Cd NMR spectroscopy and X-ray diffraction (Cd-Cd = 2.6257(5) A). Like its group 12 analogue Ar'ZnZnAr', DFT calculations showed that Ar'CdCdAr' had significant p-character in the Cd-Cd sigma-bonding HOMO.     

Reactivity of Ar'GeGeAr' (Ar' = C6H3-2,6-Dipp2, Dipp = C6H3-2,6-iPr2) toward alkynes: isolation of a stable digermacyclobutadiene

The first reactions of the "digermyne" Ar'GeGeAr' (1, Ar' = C6H3-2,6-Dipp2, Dipp = C6H3-2,6-iPr2) with alkynes are reported. 1 reacts with 1 equiv of H5C6CCC6H5 to afford the 1,2-digermacyclobutadiene 2 in high yield, while it reacts with 2 equiv of the less hindered alkyne Me3SiCCH to yield an unexpected bicyclic compound 3. Molecular structures of 2 and 3 were determined by X-ray crystallography. A possible mechanism for the formation of 3 is discussed. The high reactivity of 1, even at room temperature, emphasizes the fundamental differences between the GeGe and CC multiple bonds.     

The "diindene" ArInInAr (Ar = C(6)H(3)-2,6-Dipp(2), Dipp = C(6)H(3)-2,6-Pr(i)(2)). Dimeric versus monomeric in(I) aryls: para-substituent effects in terphenyl ligands

The synthesis and structure of a "diindene" with significant metal-metal bonding are described. It has an In-In distance of 2.9786(5) A, an In-In-C angle of 121.23(6) degrees , and an In-In bond order that is probably less than unity.     

Organoiron compounds derived from the indium 'carbene analogues', [In(N(Ar)C(Me))2CH] (Ar = dipp = 2,6-iPr2C6H3; = Mes = 2,4,6-Me3C6H2)

Oxidative insertion of the In(I) 'carbene analogues', [In{N(Dipp)C(Me))2CH] (Ar = Dipp = 2,6-iPr2C6H3; Ar = Mes = 2,4,6-Me3C6H2) into the Fe-I bond of [CpFe(CO)2I] occurred cleanly and under mild conditions to yield the In(III) compounds [CH((CH3)2CN-2,6-iPr2C6H3)2In(I)FeCp(CO)2] and [CH( (CH3)2CN-2,4,6-Me3C6H3)2In(I)FeCp(CO)2], which have been fully characterised in solution and the solid state. Attempts to abstract the iodide anion from [CH( (CH3)2CN-2,6-iPr2C6H3)2In(I)FeCp(CO)2] to form cationic species containing a coordinated indium diyl were unsuccessful and resulted in a complex mixture of products from which two ionic species were isolated. Neither cation was found to contain indium by X-ray crystallographic analysis. These observations were indicative of ill-defined decomposition pathways as have been noted by previous workers. A further attempt to form a cationic iron species containing a coordinated [In(N(Dipp)C(Me) )2CH] fragment resulted in oxidation of the iron centre from Fe(II) to Fe(III), with deposition of indium metal, and the isolation of a cationic Fe(III) beta-diketiminate complex.     

Different reactivity of the heavier group 14 element alkyne analogues Ar'MMAr' (M = Ge, Sn; Ar' = C6H3-2,6(C6H3-2,6-Pri2)2) with R2NO

The reactions of the digermanium and ditin alkyne analogues Ar'MMAr' (M = Ge or Sn) with R2NO, (R2NO = Me2C(CH2)3CMe2NO or N2O), result in complete MM bond cleavage to afford the germylene :Ge(Ar')ONR2 or the germanium(II) or tin(II) hydroxides {M(Ar')(micro-OH)}2.     

Characterization of Ar'Sn(micro-Br)Sn(Ar')CH2C6H4-4-Pri (Ar' = C6H3-2,6-Dipp2; Dipp = C6H3-2,6-Pri2): a stable structural analogue for a heavier group 14 element monobridged alkene isomer HM(micro-H)MH2 (M = Sn or Pb)

The title compound is the first stable structural analogue for the monobridged isomer of a heavier group 14 alkene analogue.     

Two types of intramolecular addition of an Al-N multiple-bonded monomer LAlNAr' arising from the reaction of LAl with N3Ar' (L = HC[(CMe)(NAr)]2, Ar' = 2,6-Ar2C6H3, Ar = 2,6-iPr2C6H3)

The reaction of beta-diketiminated aluminum(I) monomer LAl with a large bulky azide N3Ar' (L = HC(CMeNAr)2, Ar' = 2,6-Ar2C6H3, Ar = 2,6-iPr2C6H3) in the temperature range from -78 degrees C to room temperature affords two different isomers 2 and 3, which have been characterized by spectroscopic and X-ray structural analyses, as well as elemental analysis. The variable-temperature 1H NMR kinetic studies of this reaction indicate the existence of the monomer LAlNAr' (1) at low temperature and the thermal stability of the compounds increases in the order of 1 < 2 < 3.     

Quasi-isomeric gallium amides and imides GaNR2 and RGaNR (R = organic group): reactions of the digallene, Ar'GaGaAr' (Ar' = C6H3-2,6-(C6H3-2,6-Pri2)2) with unsaturated nitrogen compounds

Reactions of the "digallene" Ar'GaGaAr'(1) (Ar' = C(6)H(3)-2,6-(C(6)H(3)-2,6-Pr(i)(2))(2)), which dissociates to green :GaAr' monomers in solution, with unsaturated N-N-bonded molecules are described. Treatment of solutions of :GaAr' with the bulky azide N(3)Ar(#) (Ar(#) = C(6)H(3)-2,6-(C(6)H(2)-2,6-Me(2)-4-Bu(t))(2)), afforded the red imide Ar'GaNAr(#) (2). Addition of the azobenzenes, ArylNNAryl (Aryl = C(6)H(4)-4-Me (p-tolyl), mesityl, and C(6)H(3)-2,6-Et(2)) yielded the 1,2-Ga(2)N(2) ring compound Ar'GaN(p-tolyl)N(p-tolyl)GaA' (3) or the products MesN=NC(6)H(2)-2,4-Me(2)-6-Ga(Me)Ar' (4) and 2,6-Et(2)C(6)H(3)N=NC(6)H(3)-2-Et-6-Ga(Et)Ar' (5). Reaction of GaAr' with N(2)CPh(2) yielded the 1,3-Ga(2)N(2) ring compound Ar'Ga(mu:eta(1)-N(2)CPh(2))(2)GaAr' (6), which is quasi-isomeric to 3. Calculations on simple model isomers showed that the Ga(I) amide GaNR(2) (R = Me) is much more stable than the isomeric Ga(III) imide RGaNR. This led to the synthesis of the first stable monomeric Ga(I) amide, GaN(SiMe(3))Ar' ' (8) (Ar' ' = C(6)H(3)-2,6-(C(6)H(2)-2,4,6-Me(3))(2) from the reaction of LiN(SiMe(3))Ar' ' (7) and "GaI". Compound 8 is also the first one-coordinate gallium species to be characterized in the solid state. The reaction of 8 with N(3)Ar' ' afforded the amido-imide derivative Ar' 'NGaN(SiMe(3))Ar' ' (9), a gallium nitrogen analogue of an allyl anion. All compounds were spectroscopically and structurally characterized. In addition, DFT calculations were performed on model compounds of the amide, imide, and cyclic 1,2- and 1,3-species to better understand their bonding. The pairs of compounds 2 and 8 as well as 3 and 6 are rare examples of quasi-isomeric heavier main group element compounds.     

Characterization of the sterically encumbered terphenyl-substituted species 2,6-Trip2H3C6Sn-Sn(Me)2C6H3-2,6-Trip2, an unsymmetric, group 14 element, methylmethylene, valence isomer of an alkene, its related lithium derivative 2,6-Trip2H3C6(Me)2Sn-Sn(Li)(Me)C6H3-2,6-Trip2, and the monomer Sn(t-Bu)C6H3-2,6-Trip2 (Trip = C6H2-2,4,6-i-Pr3)

The reaction of the recently reported sterically encumbered terphenyl tin(II) halide species Sn(Cl)C6H3-2,6-Trip2 (Trip = C6H2-2,4,6-i-Pr3), 1, with 1 equiv of MeLi or MeMgBr afforded 2,6-Trip2H3C6Sn-Sn(Me)2C6H3-2,6-Trip2, 2, which is the first stable group 14 element methylmethylene (i.e., CH3CH) analogue of ethylene (H2CCH2). Reaction of 1 with 1.5 equiv of MeLi yielded the stannylstannate species 2,6-Trip2H3C6(Me)2Sn-Sn(Li)(Me)-C6H3-2,6-Trip2, 3, whereas reaction of 1 with 1 equiv of t-BuLi gave the heteroleptic stannanediyl monomer Sn(t-Bu)C6H3-2,6-Trip2 (4). The compounds 2-4 were characterized by 1H, 13C (7Li, 3 only), and 119Sn NMR spectroscopy in solution and by UV-vis spectroscopy. The X-ray crystal structures of 2-4 were also determined. The formation of the stannylstannanediyl 2 instead of the expected symmetrical, valence isomer "distannene" form (Sn(Me)C6H3-2,6-Trip2)2, 6, is explained through the ready formation of LiSn(Me)2C6H3-2,6-Trip2, 5, which reacts rapidly with 1 to produce 2 which can then react with a further equivalent of MeLi to give 3. The stability of singly bonded 2 in relation to the formally doubly bonded 6 was rationalized on the basis of the difference in the strength of their tin-tin bonds. In contrast to the methyl derivatives, the reaction of 1 with t-BuLi proceeded smoothly to give the monomeric compound 4. Apparently, the formation of a t-Bu analogue of 5 was prevented by the more crowding t-Bu group. Compound 2 is also the first example of a stable molecule with bonding between a two-coordinate, bivalent tin and four-coordinate tetravalent tin. Both compounds 2 and 3 display large J 119Sn-119Sn couplings between their tin nuclei and the tin-tin bond lengths in 2 (2.8909(2) A) and 3 (2.8508(4) A) are relatively normal despite the presence of the sterically crowding terphenyl substituents.     

Synthesis and Characterisation of Two Examples of Unsymmetrically Disubstituted Cyclotetrathiazenes, 1,5-(X)(Y)S4N4[X = Ph3PN- and Y = i) (p-CH3C6H4) Ph2PN- and ii) (P-CH3C6H4)2PhPN-]

Abstract

1,5- [(p-tolyl)diphenylphosphinimino] (triphenylphosphinimino)tetrasulphurtetranitride, (I) and 1,5-[di(p-tolyl)phenylphosphinimino] (triphenylphosphinimino)tetrasulphurtetranitride, (II) are the first examples of heterodisubstituted tetrasulphurtetranitride derivatives to be made. Their synthesis and structural characterization are described.     

2,6-Bis(methylencyclopentadienyl)-pyridin-zirconocen- und -hafnocendichlorid; Bildung und Kristallstruktur von [C5H3N-2,6-(CH2?C5H4)2Zr(Cl)(OH2)]2[ZrCl6]

2,6-Bis(methylenecyclopentadienyl)-pyridine-zirconocene and -hafnocene Dichloride; Formation and Crystal Structure of [C₅H₃N-2,6-(CH₂? C₅H₄)₂Zr(Cl)(OH₂)[ZrCl₆]] Pyridine bridged metallocene dichlorides of type C₅H₃N-2,6-(CH₂? C₅H₄)₂MCl₂ (M = Zr ( 2 ), Hf ( 5 )) were synthesized. The presence of N → Zr interaction favours the formation of zirconocene cations. Traces of water cause the formation of the salt-like compound [C₅H₃N-2,6-(CH₂? C₅H₄)₂Zr(Cl)(OH₂)]₂[ZrCl₆] 4 from 2 . The new compounds were characterized by ¹H n.m.r., and mass spectroscopy. The X-ray crystal structure of 4 shows discrete cations and anions which are connected by H-bridges.     

Infrared predissociation spectroscopy of M+ (C6H6)(1-4)(H2O)(1-2)Ar(0-1) cluster ions, M = Li, Na

Infrared predissociation (IRPD) spectra of Li(+)(C(6)H(6))(1-4)(H(2)O)(1-2)Ar(0-1) and Na(+)(C(6)H(6))(2-4)(H(2)O)(1-2)Ar(1) are presented along with ab initio calculations. The results indicate that the global minimum energy structure for Li(+)(C(6)H(6))(2)(H(2)O)(2) has each water forming a π-hydrogen bond with the same benzene molecule. This bonding motif is preserved in Li(+)(C(6)H(6))(3-4)(H(2)O)(2)Ar(0-1) with the additional benzene ligands binding to the available free OH groups. Argon tagging allows high-energy Li(+)(C(6)H(6))(2-4)(H(2)O)(2)Ar isomers containing water-water hydrogen bonds to be trapped and detected. The monohydrated, Li(+) containing clusters contain benzene-water interactions with varying strength as indicated by shifts in OH stretching frequencies. The IRPD spectra of M(+)(C(6)H(6))(1-4)(H(2)O)(1-2)Ar are very different for lithium-bearing versus sodium-bearing cluster ions emphasizing the important role of ion size in determining the most favorable balance of competing noncovalent interactions.     

Synthesis and Structure of Triphenylbismuth Dicarboxylates Ph3Bi[OC(O)R]2 (R = CH2C6H4F-3, C6H3F2-2,3, C6HF4-2,3,4,5)

Russian Journal of General Chemistry - Bismuth compounds Ph3Bi[OC(O)R]2 (R = CH2C6H4F-3, C6H3F2-2,3, C6HF4-2,3,4,5) were synthesized by the reaction of triphenylbismuth with a carboxylic acid and...