Morphology controlled solvothermal synthesis of Cd(OH)2 and CdO micro/nanocrystals on Cd foil

Cadmium hydroxide (Cd(OH)₂) and cadmium oxide (CdO) nano and micro crystals were synthesized in ethanol-water medium using cadmium foil both as a source and substrate under solvothermal condition. Different concentrations of ammonium hydroxide, hydrazine hydrate, sodium hydroxide and potassium hydroxide were added to study the structural and morphological variations in the products. Synthesis was carried out at different temperatures to study the growth stages of the nano/microstructures. The samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM). The as-prepared Cd(OH)₂ products were transformed to CdO by thermal treatment in air. The possible growth mechanism for the formation of different morphologies at different basic medium has been proposed. The optical absorption measurement was carried out to determine the values of the band gap of CdO.     

Preparation, conversion, and comparison of the photocatalytic property of Cd(OH)2, CdO, CdS and CdSe

In this paper, we report the hydrothermal preparation of Cd(OH)₂ nanowires and further conversion to CdO nanobelts, CdS nanowires and CdSe nanoparticles through thermal treatment, solvothermal and mixed-solvothermal routes, respectively. The as-obtained products were characterized by means of powder X-ray diffraction (XRD), transmission electron microscopy (TEM), and field emission scanning electron microscopy (FEMSEM). Research showed that four cadmium compounds were good photocatalysts for the degradation of organic dyes such as Safranine T and Pyronine B, under irradiation of 365 nm UV light. The order of catalytic activity of different materials was found to be Cd(OH)₂<CdO<CdS<CdSe.     

Solvothermal synthesis of Cd(OH)2 and CdO nanocrystals and application as a new electrochemical sensor for simultaneous determination of norfloxacin and lomefloxacin

Cadmium hydroxide (Cd(OH)₂) microcrystals were synthesized in ethanol–water medium by using cadmium chloride as cadmium source and 1,10-phenanthroline as complexation agent under solvothermal condition. The sample was characterized by FT-IR, X-ray diffraction (XRD), scanning electron microscopy (SEM) and TEM. The as-prepared Cd(OH)₂ product were transformed to hexagonal CdO nanocubes by thermal treatment in air at 500 °C. The possible growth mechanism for the formation of different morphologies at basic medium has been proposed. DPV experiments were carried out for the simultaneous determination of norfloxacin and lomefloxacin in the acetate buffer solution with pH 4.5.     

溶剂热法制备Cd(OH)_2和CdO纳米盘研究性实验

利用溶剂热法设计了合成Cd(OH)2和CdO纳米盘的研究性实验.以Cd(CH3COO)2等为镉源,与NaOH在水和乙二醇的混合溶剂中反应得到Cd(OH)2纳米盘(中间镉产物),后在高温下煅烧中间产物分解得到CdO纳米盘.该实验有助于理解溶剂热法中各实验参量的作用以及如何通过调节各实验参量最终得到目标产物.     

Investigation of chemical bath deposition of CdO thin films using three different complexing agents

Chemical bath deposition of CdO thin films using three different complexing agents, namely ammonia, ethanolamine, and methylamine is investigated. CdSO₄ is used as Cd precursor, while H₂O₂ is used as an oxidation agent. As-grown films are mainly cubic CdO₂, with some Cd(OH)₂ as well as CdO phases being detected. Annealing at 400 °C in air for 1 h transforms films into cubic CdO. The calculated optical band gap of as-grown films is in the range of 3.37-4.64 eV. Annealed films have a band gap of about 2.53 eV. Rutherford backscattering spectroscopy of as-grown films reveals cadmium to oxygen ratio of 1.00:1.74 ± 0.01 while much better stoichiometry is obtained after annealing, in accordance with the X-ray diffraction results. A carrier density as high as 1.89 × 10²⁰ cm⁻³ and a resistivity as low as 1.04 × 10⁻² Ω-cm are obtained.     

Sonochemical synthesis and characterization of lead iodide hydroxide micro/nanostructures

For the first time, micro/nano-sized lead iodide hydroxide; Pb(OH)I, has been successfully prepared via a simple ultrasonic method. In this method, lead nitrate and lithium iodide were applied as starting reagents to fabricate Pb(OH)I micro/nanostructures at different conditions. The effect of different surfactants like N,N-bis(salicylidene)-ethylenediamine (H₂salen), sodium dodecyl sulfate (SDS) and polyvinylpyrrolidone (PVP), sonication time, and ultrasonic intensity on the morphology and particle size of the products has been investigated. The as-produced micro/nanostructures were characterized with the aid of XRD, SEM, TEM, UV–vis, EDS and FT-IR. According to the SEM images, different morphologies of Pb(OH)I including micro- and nano-sized rods were formed by changing the preparation conditions. Based on the XRD results, it was found that Pb(OH)I and PbI₂ have been produced with and without sonication at the same conditions, respectively. The use of the H₂salen and sonication treatment were confirmed to be the crucial factors determining the formation of one-dimensional Pb(OH)I micro/nanostructures.     

Synthesis and separation property of flower-like Cd(OH)2 microstructures via a simple solution route

Well-defined flower-like Cd(OH)₂ microstructures have been successfully synthesized via a simple aqueous solution route, using CdCl₂ and NaOH as the reactants, and triethanolamine (TEA) as the modifying agent. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and UV-vis spectrometer were used to characterize the products. SEM and TEM images illustrated that the flower-like Cd(OH)₂ bundles consisted of hexagonal nanoplates with thickness of about 50 nm. The adsorption of TEA on (0 0 1) plane of the growing Cd(OH)₂ crystal leads to the flower petals in appearance. Further experiments evidenced that the positively charged Cd(OH)₂ could effectively adsorb or separate the negatively charged dye molecules.     

Formation of CdO films from chemically deposited Cd(OH)2 films as a precursor

Formation of cadmium hydroxide at room temperature onto glass substrates from an aqueous alkaline cadmium nitrate solution using a simple soft chemical method and its conversion to cadmium oxide (CdO) by thermal annealing treatment has been studied in this paper. The as-deposited film was given thermal annealing treatment in oxygen atmosphere at 450 °C for 2 h for conversion into cadmium oxide. The structural, surface morphological and optical studies were performed for as-deposited and the annealed films. The structural analyses revealed that as-deposited films consists of mixture of Cd(OH)₂ and CdO, while annealed films exhibited crystalline CdO. From surface morphological studies, conversion of clusters to grains after annealing was observed. The band gap energy was changed from 3.21 to 2.58 eV after annealing treatment. The determination of elementals on surface composition of the core-shell nanoparticles of annealed films was carried out using X-ray photoelectron spectroscopy (XPS).     

Preparation and dielectric properties of oxide added NaCl-KCl polycrystals

Pure and ZnO and CdO added (separately) polycrystals of NaCl, KCl and (NaCl)_0.5(KCl)_0.5 were prepared by the melt method. Density, atomic absorption spectroscopic and X-ray diffraction measurements indicate that the ZnO and CdO have entered into the lattices of alkali halide crystals. The dielectric measurements indicate that the dielectric parameters increase with the increase in temperature. Also, the dielectric constant and dielectric loss factor values decreased whereas the electrical conductivities increased with the increase in frequency of the AC applied. Significant changes have been observed with the dielectric parameters caused by ZnO and CdO additions. Also, the depth profile study was carried out on CdO added crystals which indicates that the dopant addition creates different layers along the crystal with increase of dopant content from top to bottom.     

Application of core-shell PEGylated CdS/Cd(OH)2 quantum dots as biolabels of Trypanosoma cruzi parasites

Semiconductor quantum dots are a promising class of materials in the labeling of biological systems. In the present study we show the marking pattern of Trypanosoma cruzi (T. cruzi) live parasites using PEGylated CdS/Cd(OH)₂ fluorescent nanocrystals. The analysis obtained by confocal fluorescence microscopy and transmission electron microscopy indicates that only the endocytic paths of parasites were labeled. The parasites were alive after the incubation with the CdS/Cd(OH)₂-PEG suspension. Labeling the T. cruzi with quantum dots can help to better understand the endocytosis process and also the cellular differentiation.     

Modification of the surface state and doping of CdTe and CdZnTe crystals by pulsed laser irradiation

The photoelectric and electrical properties of high-resistivity p-like CdTe and Cd_0.96Zn_0.04Te single crystals and barrier structures on their base before and after laser irradiation in different conditions are studied. Irradiation of samples with nanosecond ruby laser pulses was carried out in two different ways. In the first case, the Cd(Zn)Te crystals were subjected to laser action directly from the surface and irradiation within a certain range of intensities resulted in a decrease in the surface recombination rate and increase in the photoconductivity signal. The surface region with a wider bandgap in CdZnTe crystals was formed. In the second case, the samples were irradiated from the side pre-coated with a relatively thick In dopant film and it caused rectification in the I-V characteristics as a result of laser-induced doping of the thin Cd(Zn)Te surface region and formation of a built-in p-n junction. The application of the fabricated M-p-n structured In/Cd(Zn)Te/Au diodes for X-ray and γ-ray detectors is discussed.     

Synthesis and characterization of cadmium hydroxide nanowires by arc discharge method in de-ionized water

In this study, Cd(OH)₂ nanowires have been synthesized by using arc discharge method in de-ionized water. The morphology and properties of the Cd(OH)₂ nanowires were characterized by X-ray diffraction analysis (XRD), scanning electron microscopy, transmission electron microscopy (TEM), and UV–Vis spectroscopy. TEM observations revealed that Cd(OH)₂ nanowires were abundant morphology in synthesized nanostructures, and the diameter of the Cd(OH)₂ nanowires ranges from 5 to 40 nm with several micrometers of length. In addition, the width of nanowires is not uniform and varies throughout the nanowire. XRD analysis revealed that the Cd(OH)₂ nanowires grow along [001] direction. Furthermore, hexagonal- and irregular-shaped Cd(OH)₂ nanoplates were synthesized during arc discharge. It was obtained that required arc current is 50 A for the effective and large scale production of Cd(OH)₂ nanowires. Furthermore, the optical properties of the nanowires have been characterized by UV–Vis spectra. By the means of the optical studies, the direct band gap of Cd(OH)₂ nanowires was found to be 4.0 eV with strong quantum size effect. It is also shown that a simple and cheap method which does not require relatively expensive vacuum and laser equipment stipulates an economical alternative for the synthesis of Cd(OH)₂ nanowires.     

Effect of an In-Situ Nucleating Agent on the Polymorphs and Mechanical Properties of Isotactic Polypropylene

The influence of glutaric acid (GA)/cadmium hydroxide [Cd(OH)₂] mixtures on the crystallization and properties of isotactic polypropylene (iPP) was investigated by means of differential scanning calorimetry (DSC), wide angle X-ray diffraction (WAXD), polarized light microscopy, and mechanical tests. It was found that the β-crystalline form was produced in the samples containing 0.15 wt% GA and more than 0.17 wt% Cd(OH)₂. The content of β-crystalline form was maximum, i.e. K_DSC = 65.4% and K_WAXD = 71.4%, when the sample was doped with GA (0.15 wt%)/Cd(OH)₂ (0.20 wt%) (the molar ratio of GA:Cd(OH)₂ was 1:1.2). It was also found that GA/Cd(OH)₂ mixtures not only induced the β-crystalline form but also made spherulites smaller. The results of mechanical tests showed that the toughness of iPP was greatly improved by bicomponent nucleator, while the stiffness decreased a little. Fourier transform infrared spectroscopy analysis indicated that an “in-situ” chemical reaction occurred between GA and Cd(OH)₂ during melt blending, yielding an effective β nucleator (cadmium glutarate).     

Synthesis and Raman signature for the formation of CdO/MnO2 (core/shell) nanostructures

In the present report, bare CdO and CdO/MnO₂ core/shell nanostructures of various cores and different shell sizes were synthesized using co‐precipitation method. The phase, size, shape and structural details of the bare CdO and CdO/MnO₂ nanostructures were investigated by X‐ray diffraction, transmission electron microscopy (TEM), and Raman spectroscopy measurements. TEM micrographs confirm the formation of core/shell nanostructures. The presence of CdO (core) and MnO₂ (shell) crystal phases was determined by analyzing the Raman data of bare CdO and CdO/MnO₂ core/shell nanostructures. The Raman spectra of bare CdO nanostructures contain one broad intense convoluted envelop of three bands in the spectral range of 200–500 cm⁻¹ and a weaker band located at ~940 cm⁻¹. The intensity of these two Raman bands is decreased with the increase of shell size and disappeared completely for the shell size 5.3 ± 1 nm. Further, two new Raman bands appeared at ~451 and ~665 cm⁻¹ for the shell size 1.3 ± 0.1 nm. These two Raman bands are assigned to the deformation of Mn–O–Mn and Mn–O stretching modes of MnO₂. The intensity of these two Raman bands is enhanced with the increase of shell size and attains a maximum value for the shell size 5.3 ± 1 nm. The disappearance of characteristics Raman bands of CdO phase and the appearance of characteristics Raman bands corresponding to MnO₂ phase for nanostructures of shell size 5.3 ± 1 nm authenticate the presence of CdO as core and MnO₂ as shell in the core/shell nanostructures. Copyright © 2014 John Wiley & Sons, Ltd.     

Low-temperature photoluminescence spectra of CdO–In2O3 thin films prepared by sol–gel

(CdO)_1?x–(InO_3/2)_x thin films were deposited on glass substrates by the sol–gel method. The precursor solutions for the mixed oxide films were obtained from the mixture of the precursor solutions for CdO and In₂O₃ prepared separately. The investigated In atomic concentrations in the solution, x, were 0.0, 0.16, 0.33, 0.50, 0.67, 0.84, and 1. X-ray diffraction measurements showed that the films were mainly constituted of CdO, In₂O₃, and CdIn₂O₄. CdO and In₂O₃ were obtained for x=0 and 1, respectively. For x=0.67, which is the stoichiometric composition of the CdIn₂O₄ compound, only this oxide was formed. CdO and CdIn₂O₄ crystals were obtained in the Cd-rich region, whereas In₂O₃ and CdIn₂O₄ crystals were formed in the In-rich region. The PL spectra at 15 K for CdO showed the presence of two main emission bands at energies close to 2.2 and 3.0 eV. A blue-shift of these bands took place for increasing In concentration, which is related to the increase in the band gap energy of the mixed system in going from CdO, with a band gap energy of 2.46 eV, to CdIn₂O₄, with 3.2 eV, to In₂O₃, with 3.6 eV.     

Structural, optical and electrical properties of Cd-doped SnO2 thin films grown by RF reactive magnetron co-sputtering

Transparent conducting SnO₂:Cd thin films were prepared by RF reactive magnetron co-sputtering on glass slides at a substrate temperature of 500 °C using CdO as cadmium source. The films were deposited under a mixed argon/oxygen atmosphere. The structural, optical and electrical properties were analyzed as a function of the Cd amount in the target. The X-ray diffraction shows that polycrystalline films were grown with both the tetragonal and orthorhombic phases of SnO₂. The obtained films have high transmittance and conductivity. The figure of merit of SnO₂:Cd films are in the order of 10⁻³ Ω⁻¹, which suggests that these films can be considered as candidates for transparent electrodes.     

Fabrication and characterization of nanocrystalline n-CdO/p-Si as a solar cell

A nanocrystalline CdO/Si solar cell was fabricated via deposition of a CdO thin film on p-type silicon substrate with approximately 370 nm thickness using solid–vapor deposition for Cd powder at 1274 K with argon and oxygen flow. Scanning electron microscopy revealed that the product was a Cadmium oxide nanocrystalline. X-ray diffraction and energy dispersive X-ray analysis were used to characterize the structural properties of the solar cell. The nanocrystalline thin film had a grain size of 38 nm. The solar cell yielded a minimum effective reflectance that exhibited excellent light-trapping at wavelengths ranging from 400 to 1000 nm. Photoluminescence spectroscopy was conducted to investigate the optical properties. The direct band gap energy of the nanocrystalline CdO thin film was 2.46 eV. CdO/Si solar cell photovoltaic properties were examined under 100 mW/cm² solar radiation. The cell showed an open circuit voltage (V_oc) of 457 mV, a short-circuit current density (J_sc) of 18.5 mA/cm², a fill factor (FF) of 0.652, and a conversion efficiency (η) of 5.51%.     

Electrochemical capacitive properties of micron-sized chemically grown cadmium oxide discrete crystals

Stable electrochemical capacitive properties of chemically grown cadmium oxide film electrode composed of micron-sized discrete crystals in 1 M Na₂SO₄ electrolyte with a specific capacitance of 1190 mF/g studied over 1000 cycles are reported. Structural and morphological characterizations of micron-sized discrete CdO crystals have been carried out using power X-ray diffraction, scanning electron microscopy and energy dispersive X-ray analysis. Electrochemical capacitive properties of micron-sized CdO discrete crystals on tin-doped indium oxide electrode have been investigated using cyclic voltammetry and chronopotentiometry.     

Synthesis and characterization of cadmium hydroxide nano-nest by chemical route

A facile chemical route based on room temperature chemical bath deposition (CBD) was developed to deposit the Cd(OH)₂ nano-nest. The growth mechanism follows two-stage crystallization with initial growth of nucleation centers, followed by subsequent anisotropic growth. The nano-nest morphological evolution of Cd(OH)₂ on different substrates has been carried out. These films have been characterized by the techniques; such as X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM), optical absorption, contact angle measurement and thermoelectric power (TEP) measurements. The X-ray diffraction study revealed that the as deposited film consists of cadmium hydroxide (Cd(OH)₂) phase. The nano-nest consisted of wires with nearly uniform in dimensions, with diameter around 30 nm and length of few microns. As-deposited Cd(OH)₂ film used in this study showed water contact angle of 66°. The optical bandgap was found to be 3.2 eV, with n-type electrical conductivity as confirmed from thermo-emf measurements.     

Cs nuclear magnetic resonance study in CsZnCl3 single crystals of perovskite ABX3 type

CsZnCl₃ single crystals were grown by the slow evaporation method, and the spin-lattice relaxation rates and resonance lines of the ¹³³Cs nuclei in the resulting crystals were investigated using FT NMR spectrometry. The temperature dependence of the relaxation rate of the ¹³³Cs nuclei in the CsZnCl₃ crystals was found to be continuous near T_C (=366 K), and was not affected by this phase transition. Our results for CsZnCl₃ are compared with those obtained previously for other CsBCl₃ (B=Mn, Cu, and Cd) perovskite crystals. The Cs relaxation time of CsCdCl₃ is longer than that of CsMnCl₃. The differences between the atomic weights of Mn, Cu, Zn, and Cd are responsible for the differences between the spin-lattice relaxation times of these single crystals. The influence of paramagnetic ions is also important in these crystals. The differences between the spin-lattice relaxation times of these crystals could also be due to differences between the electron structures of their metal ions, in particular the structures of the d electrons.