Magnetization reversal in bulk and thin films of the ferrimagnetic ErCo0.50Mn0.50O3 perovskite

We present herein a comparison of the magnetic properties of bulk ceramics and thin films of the ferrimagnetic ErCo_0.50Mn_0.50O₃ compound. Epitaxial thin films were deposited onto (1 0 0) SrTiO₃ substrates by pulsed-laser ablation while bulk ceramics were prepared by solid state reaction. When cooling under low applied fields, a spin reversal is observed in both thin film and bulk due to the competition between two magnetic sublattices (Co/Mn and Er) coupled by a negative exchange interaction. Original features are observed in the M(H) loops for bulk materials: abrupt jumps at 4 T due to a reorientation of domains, while in the low field region, the increasing and decreasing branches of the magnetization intersect each other. In the thin film, the ordering temperature increased from 69 to 75 K, and the ZFC anomaly (AF transition) became sharper, compared to the bulk specimen. The oxygen content and the microstructure are crucial to observe the intersection of the magnetization branches.     

Thickness dependence of electroresistance in La0.67Ca0.33MnO3 epitaxial films

The electroresistance (ER) of La_0.67Ca_0.33MnO₃ (LCMO) epitaxial thin films with different thicknesses was studied. For the 110 nm thick LCMO film, its ER shows a maximum at T_p, where the resistance shows a peak, and decreases to zero at lower temperatures. While for the 30 nm thick LCMO film, its ER is remarkable in a wide temperature range. Another interesting observation in this work is that the electric current can tune the magnetoresistance of the ultrathin LCMO thin film. The results were discussed by considering the coexistence of ferromagnetic metallic phase with the charge ordered phase, and the variation of the phase separation with film thickness and electric current. This work also demonstrates that electric current can tune the magnetoresistance of the manganites, which is helpful for their applications.     

Electric current-induced giant electroresistance in epitaxial La0.67Sr0.33MnO3 thin films

The electronic transport behavior of La_0.67Sr_0.33MnO₃ epitaxial thin films with different thicknesses has been investigated under various applied DC currents. The 20 and 70 nm thick films show a giant negative electroresistance (ER). In contrast, the films with 100 nm thickness show unusual giant positive ER, which can reach 30% with the current density of 1.8×10⁸ A/cm² at room temperature. It is interesting that the electric current can also change the magnetoresistance of the films. The results were explained by considering the spin polarized current induced increase of ferromagnetic metallic phase and current-induced lattice distortion via electron wind force under high current density.     

Vibrational anisotropy of MnO6 octahedron and phase separation in La0.67−yPryCa0.33MnO3 manganites

The role of vibrational anisotropy of Mn³⁺O₆ octahedron in the phase separation behavior of La_0.67−yPr_yCa_0.33MnO₃ (x=0, 0.15, 0.25 and 0.30) has been investigated by means of magnetization M, internal friction Q⁻¹, Young's modulus E along with the X-ray powder diffraction measurements. For the samples with y=0 and 0.15, the Q⁻¹ exhibits three peaks in the ferromagnetic region, which are attributed to the intrinsic inhomogeneity of ferromagnetic phase, i.e. the electronic phase separation with the coexistence of insulating and conducting phases. However, both the samples with y=0.25 and 0.30 undergo a magnetic phase separation with the coexistence of the antiferromagnetic and ferromagnetic phases, and the Q⁻¹ peaks related to the electronic phase separation have not been observed. In addition, the Q⁻¹ exhibits a peak in the paramagnetic region for all samples, which may result from the formation of magnetic clusters. We observed that the evolution from electronic to magnetic phase separation is close related to the rapid increase in the ratio of two kinds of Jahn-Teller distortion modes Q₃ and Q₂, i.e. Q₃/Q₂. A schematic phase diagram is given in the text, and it is suggested that the enhancement of vibrational anisotropy of Mn³⁺O₆ octahedron plays a key role in the evolution from electronic to magnetic phase separation.     

Dependence of magnetic anisotropy of the La0.67Ca0.33MnO3 films on substrate and film thickness

Strain in the La_0.67Ca_0.33MnO₃ films has been tuned by varying substrate and film thickness, and its effects on magnetic anisotropy are studied based on the measurements of isothermal magnetization. Measuring the strain in the films by the out-of-plane lattice parameter (c), we found a strong dependence of the magnetic anisotropy constant (Ku) on strain. Ku decreases linearly from ∼−1.1×10⁶ erg/cm³ for c=0.763 nm to 1.2×10⁶ erg/cm³ for c=0.776 nm, corresponding to a change from tensile strain to compressive strain. Positive Ku signifies a uniaxial anisotropy with the easy axis perpendicular to the film plane, while negative Ku demonstrates an anisotropy of the easy plane character. Smaller or larger c leads a decrease or increase in Ku, which indicates the presence of other effects in addition to those associated with strain. Three distinctive processes for the magnetization are observed along the hard magnetic axis of the films on (001)SrTiO₃, suggesting a possibility of strain relaxation even in ultra-thin films.     

La0.7Ce0.3MnO3 epitaxial films fabricated by a pulsed laser deposition method

La_0.7Ce_0.3MnO₃ epitaxial films were successfully fabricated via a pulsed laser deposition method by controlling the experimental conditions. A series of experiments with varying the oxygen pressure and the substrate temperature demonstrated that the use of appropriate conditions is crucial for fabricating the epitaxial thin films. The existence of such suitable conditions was thermodynamically interpreted in terms of the stability of Mn²⁺ ion. Both XRD and EPMA measurements indicated that La_0.7Ce_0.3MnO₃ thin films fabricated herein form single phases, although it was difficult to present the direct experimental evidence to prove that Ce ion can really exist within the perovskite structure. The resultant films with oxygen annealing showed a metal-insulator transition and ferromagnetic property with Curie temperature of 275 K.     

Magnetic phase coexistence in Tb- and Sr-doped La0.7Ca0.3MnO3 manganite:A temperature-dependent neutron diffraction study

We report the results of the temperature-dependent neutron diffraction measurements on the nearly half-doped (La_0.325Tb_0.125)(Ca_0.3Sr_0.25)MnO₃ manganite sample. The simultaneous doping of magnetic Tb³⁺ and divalent Sr²⁺ in the La_0.7Ca_0.3MnO₃ system results into a large A-site size disorder. Rietveld refinement of neutron diffraction data reveal that the single phase sample crystallizes in a distorted orthorhombic structure. Increased 〈r_A〉 value affects the transport behavior that results into an insulating-like behavior of the sample. Under application of 1 T field sample exhibit insulating-like behavior while insulator-metal transition (T_IM) is exhibited under 5 and 8 T fields. Variable range hoping (VRH) mechanism of charge carriers is exhibited in the insulating region. Field cooled and zero field cooled magnetization measurement shows the Curie temperature (T_C)~47 K. The refinement of the ND data collected at various temperatures below 300 K shows that there is no structural phase transition in the compound. Around 100 K, a magnetic peak appears at lower angle that can be ascribed to the presence of the A-type antiferromagnetic (AFM) phase. Two more peaks are observed around 50 K at lower angles that can be fitted in CE-type antiferromagnetic phase. Splitting of the peaks at lower temperatures is the signature of orbital ordering in the presently studied nearly half-doped manganite system. Results of the detailed structural analysis of the temperature-dependent ND measurements on (LaTb)_0.45(CaSr)_0.55MnO₃ sample has been discussed in the light of coexisting A-type and CE-type antiferromagnetic phases present in the sample at low temperature.     

High Curie temperature in B-site ordered Sr2CrWO6 epitaxial thin films

Epitaxial and c-axis oriented double perovskite Sr₂CrWO₆ thin films were prepared on SrTiO₃ (100) and LaAlO₃ (100) substrates by pulsed-laser deposition. Structural, magnetic and transport properties were found to be sensitive to the gas conditions employed during the deposition. A small amount of oxygen along with Ar during the deposition was found to be essential for B-site ordering; such films displayed lattice parameters close to the bulk value and display ferromagnetic metallic behavior. The Curie temperature observed above 500 K in these films is higher than bulk Sr₂CrWO₆ samples. Films grown without oxygen were observed to have long c-parameter and no B-site ordering; they were non-magnetic and semiconducting.     

Electrical conduction through bond percolation in Nd0.67Sr0.33MnO3

We report our analysis of resistivity data on Nd_0.67Sr_0.33MnO₃ polycrystalline samples as a function of preparative conditions using a bond percolation model for a random mixture of metallic and insulating regions, assuming polaronic transport above and below the metal-insulator (M-I) transition temperature. Our analysis suggests that for oxygen deficient compounds the M-I transition that occurs at a lower temperature than the ferromagnetic transition arises from a percolation of the metallic regions. The temperature dependence of resistivity and thermopower suggests the existence of a bimodal distribution of conductivities.     

Double-peak resistivity transport properties of La0.67Ca0.33MnO3 ceramics

Polycrystalline samples of La_0.67Ca_0.33MnO₃ were prepared by solid-state reactions by varying the pelletization force and the sintering temperature. Lowering the sintering temperature gave rise to smaller grains and increased the overall resistivity of the ceramic. Partial melting was observed in the ceramics sintered at higher temperatures (1400-1500 °C). Additionally, these ceramics showed two distinct resistivity peaks. The resistivity peak near the magnetic transition (T_C) was sharp, whereas the second peak was a broad one observed below T_C.     

Growth of single-phase c-axis aligned La1.2Ca1.8Mn2O7 films on SrTiO3 (001)

We report the growth of single phase, c-axis aligned thin films of La_1.2Ca_1.8Mn₂O₇ on SrTiO₃ (001) substrates using a controlled pulsed laser deposition method. In this method, constraint of epitaxy is utilized to stabilize the Ruddlesdon-Popper (RP) phase of La_1.2Ca_1.8Mn₂O₇. Oxygen ambient pressure and the rate of deposition play a very important role in influencing the epitaxial growth as well as maintaining phase purity of the material. The oxygen pressure inside the deposition chamber was very precisely controlled and varied during the layer-by-layer growth of the film. Films, prepared by our method, show excellent electrical and magnetic characteristics with a sharp metal-insulator transition at T_M-I=90 K, closely followed by a magnetic transition at T_C=91 K.     

Magnetoresistance and transport properties of different impurity doped La0.67Ca0.33MnO3 composite

An enhanced magnetoresistance and a two-fold effect result from impurity dopant were observed in composites of La_0.67Ca_0.33MnO₃/YSZ and La_0.67Ca_0.33MnO₃/Fe₃O₄. Where YSZ represents yttria-stabilized zirconia and the doping level of both YSZ and Fe₃O₄ is 1 mol%. Different electrical and magnetic transport properties, in particular a lower field magnetization behavior, were observed between pure La_0.67Ca_0.33MnO₃ and the impurity doped La_0.67Ca_0.33MnO₃ composites. Compared with pure La_0.67Ca_0.33MnO₃, a possible interpretation is presented by considering the influences of YSZ and Fe₃O₄ on the structure of grain boundaries and/or surfaces of La_0.67Ca_0.33MnO₃grains.     

The influence of the O–O isotope substitution on spin dynamics of (La0.25Pr0.75)0.7Ca0.3MnO3: La NMR data

The ¹³⁹La NMR spectra and spin–spin relaxation times have been measured for the ¹⁶O and ¹⁸O isotope-substituted manganite (La_0.25Pr_0.75)_0.7Ca_0.3MnO₃ in the external magnetic field of 5 T. The NMR signal wipe-out has been observed in the ¹⁸O-enriched sample in the charge-ordered state. This phenomenon is connected with a sharp increase in the spin–spin relaxation rate. The great isotope-effect observed provides a clear evidence of an essential role of oxygen motion in controlling the long-range magnetic order in manganites.     

Electron-doped Sm1−xSrxMnO3 perovskite manganites: Crystal and magnetic structures and physical properties

We present the results of a study of electron-doped Sm_1−xSr_xMnO₃ (x>0.5) perovskite manganites by combining high-resolution neutron powder diffraction with measurements of resistivity, magnetization and magnetic susceptibility. Although investigated Sm_0.45Sr_0.55MnO₃ and Sm_0.37Sr_0.63MnO₃ compounds belonging to the same phase diagram area differ significantly in the strontium content, they are homogeneous antiferromagnetic (AF) insulators and do not exhibit CMR. They have different crystallographic symmetries (orthorhombic Pbnm and tetragonal I4/mcm, respectively) in the entire temperature range under study (1.5-288 K), differ in the type of spin ordering at low temperatures (AF-A and AF-C), are characterized by different orbital polarizations (d_x²_−y² and d_3z²_−r²), and possess two- and one-dimensional magnetic properties, respectively. The lack of magnetoresistance for these compositions is explained by the lack of coexisting magnetic phases involving double exchange ferromagnetism, in contrast to what is observed for the magnetoresistive Sm_1−xSr_xMnO₃ compounds, that is with x?0.52.     

On the coexistence of spin and lattice polarons in the La0.67−xEuxCa0.33MnO3 CMR system

The electrical and magnetic transport properties of the La_0.67−xEu_xCa_0.33MnO₃ system exhibit lowering of insulator to metal and paramagnetic to ferromagnetic transition temperature (T_C) with the increase of Eu concentration in addition to possessing CMR property. The temperature variation of electrical resistivity and magnetic susceptibility for x=0.21 is found to have two distinct regions in the paramagnetic state for T>T_P; one with the localization of lattice polaron in the high-temperature region (T>1.5T_P) satisfying the dynamics of variable range hopping (VRH) model and the other being the combination of the spin and lattice polarons in the region T_P<T<1.5T_P. The resistivity variation with temperature and magnetic field, the cusp in the resistivity peak and CMR phenomenon are interpreted in terms of coexistence of spin and lattice small polarons in the intermediate region (T_P<T<1.5T_P). The spin polaron energy in the La_0.46Eu_0.21Ca_0.33MnO₃ system is estimated to be 106.73±0.90 meV and this energy decreases with the increase of external magnetic field. The MR ratio is maximal with a value of 99.99% around the transition temperature and this maximum persists till T→0 K, at the field of 8 T.     

Polarized SSXANES study of spin ordering in ferromagnetic and paramagnetic phases of La1.2Sr1.65Ca0.15Mn2O7

Spin-selected polarized X-ray absorption near-edge structures (SSXANES) at the Mn K-edge from a bilayer La_1.2Sr_1.65Ca_0.15Mn₂O₇ single crystal have been studied with high resolution, both in the ferromagnetic (15 K) as well as paramagnetic phase (300 K). The orientation-dependent SSXANES spectra show unmistakable temperature dependence as the system makes the ferromagnetic to paramagnetic phase transition. The pre-edge structures are too intense to be ascribed to weak quadrupole transitions and are interpreted in terms of hybridization of Mn 3d orbitals with O2p and Mn 4p orbitals over and above similar onsite hybridization. The results also indicate possible existence of a small local (time-frozen) ferromagnetic ordering in the macroscopically disordered state. Need for further experimental and theoretical work on the SSXANES spectra from the bilayer system is emphasized.     

Magnetic properties of thick multiferroic hexagonal HoMnO3 films

Multiferroic hexagonal HoMnO₃/YSZ(1 1 1) films with a thickness of ?1 μm have been grown by pulsed laser deposition. Conventional X-ray diffraction and pole figure measurement indicate that the film is epitaxially grown without secondary phase or misorientation. Magnetization measurements reveal some differences in comparison with a single crystal. These differences are possibly related to the larger a and c lattice parameters of the film which are likely to alter the bond lengths and, thus, the magnetic superexchange interactions. A substantial change of the complex Ho³⁺ magnetic ordering below 6 K is observed.     

Sound velocity in La0.5Ca0.5MnO3

In this Letter the microscopic theory of the relative change in velocity of sound with temperature of La_0.5Ca_0.5MnO₃ is reported. The phonon Green function is calculated using the Green function technique of Zubarev in the limit of zero wave vector and low temperature. The lattice model electronic Hamiltonian in the presence of the phonon interaction with hybridization between the conduction electrons and the l-electrons is used. The relative change in velocity of sound at various temperatures is studied for different model parameters namely the position of the l-level, the effective phonon coupling strength and hybridization strength. The phonon anomalies observed experimentally at different temperatures are explained theoretically. An abrupt change in velocity at Neel temperature (TN) is observed clearly. It is observed that different parameters influence the velocity of sound.     

Intrinsic inhomogeneity and non-linear conduction in charge-ordered Bi0.5Ca0.4Sr0.1MnO3

Systematic studies of X-ray, magnetic, electronic transport, and elastic properties have been performed on polycrystalline Bi_0.5Ca_0.4Sr_0.1MnO₃ sample. The sample exhibits charge ordering (CO) state below T_CO (=304 K), accompanied by a distinct maximum in magnetization. The softening of Young's modulus in the vicinity of T_CO indicates that there is a strong coupling of electron-phonon due to Jahn-Teller (JT) effect. The dynamic ferromagnetic spin correlations are observed at high temperatures above T_CO, which are replaced by antiferromagnetic (AFM) spin fluctuations at a concomitant CO transition. Below 32 K, a spin-glass (SG) state dominates at low temperatures. The voltage-current (V-I) characteristics measurement results indicate that the non-linear conduction starts above a threshold current, giving rise to a region of negative differential resistance (NDR). The origin of the non-linear conduction is discussed in view of current induced collapse of CO state associated with phase-separation mechanism.     

Investigation of FIB irradiation damage in La0.7Sr0.3MnO3 thin films

In this work we analyse systematically how morphological and magnetotransport properties of manganite thin films are affected by the damage induced by focused ion beam (FIB) irradiation. We irradiate different areas of the same sample with doses ranging from 5×10¹² to 3×10¹⁷ ions/cm² and we find that the film becomes swollen for doses up to 10¹⁶ ions/cm² and is eventually eroded by ion milling for further irradiation. On the other hand, transport properties are much more sensitive to FIB irradiation: the metal–insulator transition temperature is found to decrease monotonically with increasing doses up to 1.8×10¹³ ions/cm². At doses higher than 5.6×10¹³ ions/cm² the metallic state is completely suppressed and likely, also ferromagnetism.