Multiple roles of bathocuproine employed as a buffer-layer in organic light-emitting diodes

Efficiency and brightness and carriers injection have been obviously improved by using bathocuproine (BCP) as a buffer-layer in organic light-emitting diodes. Compared with the bufferless device, the quantum efficiency of device ITO/NPB (10 nm)/Alq₃ (10 nm)/BCP (2.4 nm)/Al has increased four times at the same current density (32 mA/cm²). Moreover, the buffer layer has changed the current-voltage properties and the turn-on voltage has obviously decreased. Considering BCP and Al³⁺ can react conveniently under room temperature, we suggest that a complex cathode structure of BCP/[(Al)_x(BCP)_y]^3x+/Al has formed under electric field and the new cation [(Al)_x(BCP)_y]^3x+ at the BCP/Al interface has improved the internal electric field and then enhanced the electrons injection. we conclude that: for a very thin (<1 nm) BCP buffer layer, improving electron injection will principally responsible to the improvement of the performance of the OLEDs; for a thicker BCP layer, there will be a synthetic function of BCP: improving electron injection, hole-blocking and electron-transporting.     

New double graded structure for enhanced performance in white organic light emitting diode

This study presents a new design that uses a combination of a graded hole transport layer (GH) structure and a gradually doped emissive layer (GE) structure as a double graded (DG) structure to improve the electrical and optical performance of white organic light-emitting diodes (WOLEDs). The proposed structure is ITO/m-MTDATA (15 nm)/NPB (15 nm)/NPB: 25% BAlq (15 nm)/NPB: 50% BAlq (15 nm)/BAlq: 0.5% Rubrene (10 nm)/BAlq: 1% Rubrene (10 nm)/BAlq: 1.5% Rubrene (10 nm)/Alq₃ (20 nm)/LiF (0.5 nm)/Al (200 nm). (m-MTDATA: 4,4′,4″ -tris(3-methylphenylphenylamino)triphenylamine; NPB: N,N′-diphenyl-N,N′-bis(1-naphthyl-phenyl)-(1,1′-biphenyl)-4,4′-diamine; BAlq: aluminum (III) bis(2-methyl-8-quinolinato) 4-phenylphenolate; Rubrene: 5,6,11,12-tetraphenylnaphthacene; Alq₃: tris-(8-hydroxyquinoline) aluminum). By using this structure, the best performance of the WOLED is obtained at a luminous efficiency at 11.8 cd/A and the turn-on voltage of 100 cd/m² at 4.6 V. The DG structure can eliminate the discrete interface, and degrade surplus holes, the electron-hole pairs are efficiently injected and balanced recombination in the emissive layer, thus the spectra are unchanged under various drive currents and quenching effects can be significantly suppressed. Those advantages can enhance efficiency and are immune to drive current density variations.     

NaCl/Ca/Al as an efficient cathode in organic light-emitting devices

An efficient cathode NaCl/Ca/Al used to improve the performance of organic light-emitting devices (OLEDs) was reported. Standard N,N′-bis(1-naphthyl)-N,N′-diphenyl-1,1′ biphenyl 4,4′-dimaine (NPB)/tris-(8-hydroxyquinoline) aluminum (Alq₃) devices with NaCl/Ca/Al cathode showed dramatically enhanced electroluminescent (EL) efficiency. A power efficiency of 4.6 lm/W was obtained for OLEDs with 2 nm of NaCl and 10 nm of Ca, which is much higher than 2.0 lm/W, 3.1 lm/W, 2.1 lm/W and 3.6 lm/W in devices using, respectively, the LiF (1 nm)/Al, LiF (1 nm)/Ca (10 nm)/Al, Ca (10 nm)/Al and NaCl (2 nm)/Al cathodes. The investigation of the electron injection in electron-only devices indicates that the utilization of the NaCl/Ca/Al cathode substantially enhances the electron injection current, which in case of OLEDs leads to the improvement of the brightness and efficiency.     

Improved performance and stability by an Al/Ni bilayer cathode in organic light-emitting diodes

Al/Ni bilayer cathode was used to improve the electroluminescent (EL) efficiency and stability in N,N′-bis(1-naphthyl)-N,N′-diphenyl-1,1′ biphenyl 4,4′-dimaine (NPB)/tris-(8-hydroxyquinoline) aluminum (Alq₃)-based organic light-emitting diodes. The device with LiF/Al/Ni cathode achieved a maximum power efficiency of 2.8 lm/W at current density of 1.2 mA/cm², which is 1.4 times the efficiency of device with the state-of-the-art LiF/Al cathode. Importantly, the device stability was significantly enhanced due to the utilization of LiF/Al/Ni cathode. The lifetime at 30% decay in luminance for LiF/Al/Ni cathode was extrapolated to 400 h at an initial luminance of 100 cd/m², which is 10 times better than the LiF/Al cathode.     

Efficient red organic light-emitting diode sensitized by a phosphorescent Ir compound

The efficiencies of red organic light-emitting diode (OLED) using tris-(8-hydroxy-quinoline)aluminum (Alq₃) as host and 4-(dicyanomethylene)-2-t-butyl-6-(1,1,7,7-tetramethyljulolidyl-9-enyl)-4H-pyran (DCJTB) as dopant were greatly increased by adding a small amount (0.3 wt%) of Ir compound, iridium(III) bis(3-(2-benzothiazolyl)-7-(diethylamino)-2H-1-benzopyran-2-onato-N′,C⁴) (acetyl acetonate) (Ir(C6)₂(acac)), as a sensitizer. The device has a sandwiched structure of indium tin oxide (ITO)/4,4′,4″-tris(N-(2-naphthyl)-N-phenyl-amino)triphenylamine (T-NATA) (40 nm)/N,N′-bis(1-naphthyl)-N,N′-diphenyl-1,1′-biphenyl-4,4′ diamine (NPB) (40 nm)/Alq₃:DCJTB (0.7 wt%):Ir(C6)₂(acac) (0.3 wt%) (40 nm)/Alq₃ (40 nm)/LiF (1 nm)/Al (120 nm). It can be seen that the current efficiencies of this device remained almost (13.8±1) cd/A from 0.1 to 20,000 cd/m² and the Commission International d’Eclairage (CIE) coordinates at (0.60, 0.37) in the range of wide brightness. The significant improvement was attributed to the sensitization effect of the doped Ir(C6)₂(acac), thus the energy of singlet and triplet excitons is simultaneously transferred to the DCJTB.     

A terbium (III) complex with triphenylamine-functionalized ligand for organic electroluminescent device

A novel ligand, 4-diphenylamino-benzoic acid (HDPAB), and the corresponding Tb (III) complex, Tb (DPAB)₃ which can be dissolved easily in organic solvents were synthesized and characterized. Organic electroluminescent (EL) device with a structure of indium tin oxide (ITO)/poly(N-vinylcarbazole) (PVK): Tb (DPAB)₃ (50 wt%, 80 nm)/1,3,5-tris-(N-phenylbenzimidazol-2-yl)benzene (TPBI) (30 nm)/tri(8-hydroxyquinoline)aluminum (AlQ) (20 nm)/LiF (1 nm)/Al (150 nm) in which Tb (DPAB)₃ acted as an emitter were fabricated. The maximum luminance of 230 cd m⁻² at 20 V and the maximum efficiency of 0.62 cd A⁻¹ were obtained due to the introduction of hole-transporting group, representing the best result to date among Tb (III) carboxylate complexes based EL devices. These results indicate that modifications of rare earth complexes are a promising way to improve the properties of EL devices.     

Efficient white organic light-emitting devices using 4,7-diphenyl-1,10-phenanthroline as block layer

A white light-emitting device has been fabricated with a structure of ITO/m-MTDATA (45 nm)/NPB (10 nm)/DPVBi (8 nm)/DPVBi:DCJTB 0.5% (15 nm)/BPhen (x nm)/Alq₃ [(55−x) nm]/LiF (1 nm)/Al, with x=0, 4, and 7. BPhen was used as the hole-blocking layer. This results in a mixture of lights from DPVBi molecules (blue-light) and DCJTB (yellow-light) molecules, producing white light emission. The chromaticity can be readily adjusted by only varying the thickness of the BPhen layer. The CIE coordinates of the device are largely insensitive to the driving voltages. When the thickness of BPhen is 7 nm, the device exhibits peak efficiency of 6.87 cd/A (3.59 lm/W) at the applied voltage of 6 V, the maximum external quantum efficiency η_ext=2.07% corresponding to 6.18 cd/A, and the maximum brightness is 18494 cd/m² at 15 V.     

Reduction of driving voltage in organic light-emitting diodes with molybdenum trioxide in CuPc/NPB interface

A novel structure of organic light-emitting diode was fabricated by inserting a molybdenum trioxide (MoO₃) layer into the interface of hole injection layer copper phthalocyanine (CuPc) and hole transport layer N,N′-diphenyl-N,N′-bis(1-napthyl-phenyl)-1,1′-biphenyl-4,4′-diamine (NPB). It has the configuration of ITO/CuPc(10 nm)/MoO₃(3 nm)/NPB(30 nm)/ tris-(8-hydroxyquinoline) aluminum (Alq₃)(60 nm)/LiF(0.5 nm)/Al. The current density-voltage-luminance (J-V-L) performances show that this structure is beneficial to the reduction of driving voltage and the enhancement of luminance. The highest luminance increased by more than 40% compared to the device without hole injection layer. And the driving voltage was decreased obviously. The improvement is ascribed to the step barrier theory, which comes from the tunnel theory. The power efficiency was also enhanced with this novel device structure. Finally, “hole-only” devices were fabricated to verify the enhancement of hole injection and transport properties of this structure.     

Synthesis and electroluminescent properties of a carbozole-functionalized europium(III) complex

A novel europium(III) complex, tris(dibenzoylmethanate){1-[9-hexyl-9H-carbazole]-2-(2-pyridyl)-benzimidazole}europium(III) [Eu(DBM)₃(CAR-PyBM)] functionalized by a carbozole fragment, was synthesized and used as emitting material in organic electroluminescent (EL) devices. Compared with the device based on an unfunctional Eu(III) complex, [Eu(DBM)₃HPyBM] (HPyBM=2-(2-pyridyl)benzimidazole), the EL performances of the device using [Eu(DBM)₃(CAR-PyBM)] as an emitter was significantly enhanced due to the improvement of hole-transporting ability. The maximum efficiency and luminance of red emission achieved from the device with the configuration of ITO/N,N′-diphenyl-N,N′-bis(3-methylphenyl)-1,1′-biphenyl-4,4′diamine (TPD, 50 nm)/ [Eu(DBM)₃(CAR-PyBM)] (30 nm)/1,3,5-tirs-(N-phenylbenzimidazol-2-yl)benzene (TPBI, 20 nm)/LiF (1.5 nm)/Al were 4.2 cd/A and 200 cd/m², respectively.     

Controlled fabrication of nano-scale double barrier magnetic tunnel junctions using focused ion beam milling method

The controlled fabrication method for nano-scale double barrier magnetic tunnel junctions (DBMTJs) with the layer structure of Ta(5)/Cu(10)/Ni₇₉Fe₂₁(5)/Ir₂₂Mn₇₈(12)/Co₆₀Fe₂₀B₂₀(4)/Al(1)–oxide/Co₆₀Fe₂₀B₂₀(6)/Al(1)–oxide/Co₆₀Fe₂₀B₂₀(4)/Ir₂₂Mn₇₈(12)/Ni₇₉Fe₂₁(5)/Ta(5) (thickness unit: nm) was used. This method involved depositing thin multi-layer stacks by sputtering system, and depositing a Pt nano-pillar using a focused ion beam which acted both as a top contact and as an etching mask. The advantages of this process over the traditional process using e-beam and optical lithography in that it involve only few processing steps, e.g. it does not involve any lift-off steps. In order to evaluate the nanofabrication techniques, the DBMTJs with the dimensions of 200 nm×400 nm, 200 nm×200 nm nano-scale were prepared and their R–H, I–V characteristics were measured.     

Bright electrophosphorescent devices based on sterically hindered spacer-containing Cu(I) complex

A Cu(I) complex, [Cu(Dppp)(DPEphos)]BF₄ (Dppp=2,3-diphenyl-pyrazino[2,3-f][1,10]phenanthroline, DPEphos=Bis[2-(diphenylphosphino)phenyl]ether), is synthesized and used as the dopant in bright electrophosphorescent devices with the general structure ITO/m-MTDATA (30 nm)/NPB (20 nm)/CBP: ×wt% [Cu(Dppp)(DPEphos)]BF₄ (30 nm)/Bphen (20 nm)/Alq₃ (20 nm)/LiF (0.8 nm)/ Al (200 nm). These devices exhibit a maximum brightness of 4483 cd/m² and a peak efficiency of 3.4 cd/A. Compared with previously reported similar devices based on Cu(I) complexes, the brightness of the devices presented in this article is the best. Meanwhile, 2% [Cu(Dppp)(DPEphos)]BF₄-based devices exhibit white light-emitting properties with CIE coordinates of (0.32. 0.35) at 10 V.     

Theoretical calculation of the temperature coefficient of surface excess entropy of pure liquid metals

The temperature coefficient of surface excess entropy dS_s/dT of pure liquid metals (Al, Ga and Bi) has been calculated in the framework of Skapski's nearest-neighbor interaction-broken-bond model. It is found that this coefficient varies by 47.2%, 69% and 85% for pure liquids Al, Bi and Ga, respectively, in the temperature range between the melting temperature T_m and T_m + 400 K. The value of the coefficient for pure liquid Ga is an order of magnitude larger than that of Al and Bi. The largest increase in dS_S/dT with temperature occurs in the first 100 K away from T_m, being the largest for liquid Ga which is about 43%. This variation is experimentally inaccessible and therefore lacking in the literature and has never been reported.     

Highly efficient greenish blue-emitting organic diodes based on pyrene derivatives

We report the synthesis of pyrene derivatives as the light emissive layer for highly efficient organic electroluminescence (EL) diodes. Multilayer devices were fabricated with pyrene derivatives (ITO/NPB (50 nm)/blue material (30 nm)/BCP (10 nm)/Alq₃ (30 nm)/LiF (1 nm)/Al). By using 1,1′-dipyrene (DP) and 1,4-dipyrenyl benzene (DPB), the devices produced the blue EL emissions with 1931 Commission International de L’Eclairage coordinates of (x=0.21, y=0.35) and (x=0.19, y=0.25), respectively. The device with DPB shows a maximum brightness of 42,445 cd/m² at 400 mA/cm² and the luminance efficiency of 8.57 cd/A and 5.18 lm/W at 20 mA/cm².     

White organic electroluminescent device with photovoltaic performances

Organic device with structure of indium tin oxide (ITO)/1,3,5-tris-(3-methylphenylphenylamino)triphenylamine (m-MTDATA)/2-tert-butyl-9,10-di-beta-naphthylanthracene (TBADN)/2,9-dimethyl-4,7-diphenyl-1,10-phenan-throline (BCP)/LiF/Al, was fabricated, which show high efficient white electroluminescence (EL) or photovoltaic (PV) properties when it was driven by direct current (DC) bias or illuminated by ultraviolet (UV) light. Under a DC bias, the device shows efficient white EL emission. A maximum luminous efficiency of 1.1 lm/W was obtained at 8 V, which corresponds the Commission International de L’Eclairage coordinates (CIE) of (x = 0.298, y = 0.365). When the bias was increased to 12 V, the device shows bright white emission with the maximum brightness of 4300 cd/m², corresponding CIE coordinates of (x = 0.262, y = 0.280). When the diode was irradiated by a 365 nm UV-light (4 mW/cm²), the open-circuit voltage (V_oc) of 1.2 V, short-circuit (I_sc) of 0.065 mA/cm², fill factor (FF) of 0.24 and power conversion efficiency of 0.47% have been determined, respectively. The generation mechanisms of white light and PV of the bi-functional diode were discussed as well.     

A Monte Carlo simulation study of H2 layers on NaCl(0 0 1)

Monte Carlo simulations show that, at one monolayer coverage, H₂ molecules adsorbed on a NaCl(0 0 1) surface occupy all Na⁺ sites and form a commensurate c(2 × 2) structure. If the Cl⁻ sites are occupied as well, a bi-layer p(2 × 1) structure forms. An examination of the H₂ molecules’ rotational motion shows the molecular axes are azimuthally delocalized and so both of the structures acquire (1 × 1) symmetry in accord with experimental observations. These calculations also show that helicoptering o-H₂ (J = 1, m = ±1) prefer to sit on top of Na⁺ sites, while cartwheeling o-H₂ (J = 1, m = 0) prefers to locate over Cl⁻ sites, in agreement with other work.     

Formation of Sim and SimCn clusters by C60 sputtering of Si

The secondary ion mass spectrum of silicon sputtered by high energy C₆₀⁺ ions in sputter equilibrium is found to be dominated by Si clusters and we report the relative yields of Si_m⁺ (1 ≤ m ≤ 15) and various Si_mC_n⁺ clusters (1 ≤ m ≤ 11 for n = 1; 1 ≤ m ≤ 6 for n = 2; 1 ≤ m ≤ 4 for n = 3). The yields of Si_m⁺ clusters up to Si₇⁺ are significant (between 0.1 and 0.6 of the Si⁺ yield) with even numbered clusters Si₄⁺ and Si₆⁺ having the highest probability of formation. The abundances of cluster ions between Si₈⁺ and Si₁₁⁺ are still significant (>1% relative to Si⁺) but drop by a factor of ∼100 between Si₁₁⁺ and Si₁₃⁺. The probability of formation of clusters Si₁₃⁺-Si₁₅⁺ is approximately constant at ∼5 × 10⁻⁴ relative to Si⁺ and rising a little for Si₁₅⁺, but clusters beyond Si₁₅ are not detected (Si_m≥16⁺/Si⁺ < 1 × 10⁻⁴). The probability of formation of Si_m⁺ and Si_mC_n⁺ clusters depends only very weakly on the C₆₀⁺ primary ion energy between 13.5 keV and 37.5 keV. The behaviour of Si_m⁺ and Si_mC_n⁺ cluster ions was also investigated for impacts onto a fresh Si surface to study the effects that saturation of the surface with C₆₀⁺ in reaching sputter equilibrium may have had on the measured abundances. By comparison, there are very minor amounts of pure Si_m⁺ clusters produced during C₆₀⁺ sputtering of silica (SiO₂) and various silicate minerals. The abundances for clusters heavier than Si₂⁺ are very small compared to the case where Si is the target.The data reported here suggest that Si_m⁺ and Si_mC_n⁺ cluster abundances may be consistent in a qualitative way with theoretical modelling by others which predicts each carbon atom to bind with 3-4 Si atoms in the sample. This experimental data may now be used to improve theoretical modelling.     

White organic light emitting diodes based on DCM dye sandwiched in 2-methyl-8-hydroxyquinolinolatolithium

Stable white electroluminescence (EL) has been achieved from organic LED, in which an ultrathin 4-(dicyanomethylene)-2-methyl-6-(p-dimethyl-aminostyryl)-4H-pyran (DCM) dye layer has been inserted in between two 2-methyl-8-hydroxyquinolinolatolithium [LiMeq] emitter layer and by optimizing the position of the DCM dye layer from the α-NPD/LiMeq interface. Electroluminescence spectra, current-voltage-luminescence (I-V-L) characteristics of the devices have been studied by changing the position of the dye layer. As the distance of DCM layer from α-NPD/LiMeq interface is increased, the intensity of host emission enhances rapidly. Introduction of thin layer of DCM in emissive layer increases the turn on voltage. The best Commission International de L’ Eclairage (CIE) coordinates i.e. (0.32, 0.33) were obtained with device structure ITO/α-NPD(30 nm) /LiMeq(10 nm)/DCM(1 nm)/LiMeq(25 nm)/BCP(6 nm)/Alq₃(28 nm)/LiF(1 nm)/Al(100 nm). The EL spectrum covers the whole visible spectra range 400-700 nm. The color rendering index (CRI) for our best white light (Device 4) is 47.4. The device shows very good color stability in terms of CIE coordinates with voltages. The maximum luminescence 1240 cd/m⁻² has been achieved at 19 V.     

Three- and two-photon absorption in HCl and DCl: identification of Ω = 3 states and state interaction analysis

High resolution (3 + 1) and (2 + 1)REMPI spectra of HCl and DCl for total current detection at room temperature or TOF mass detection after jet cooling were recorded for the spectral region 89 000-89 600 cm⁻¹. Analysis of the (3 + 1)REMPI spectra by use of three-photon absorption modeling allowed, for the first time, identification and characterization of the l (³Φ₃) states. Consistent anomalies in spectral structures due to transitions to the j (³Σ⁻) (0⁺) state are interpreted as being due to interactions with the V (¹Σ⁺) ion-pair states. Interaction strengths are evaluated. Simulation analyses and determination of isotope shifts allowed evaluation of vibrational and rotational spectroscopic parameters for the l (³Φ₃) and the j (³Σ⁻) (0⁺) states for both molecules.     

The instanton vacuum of generalized CP models

It has recently been pointed out that the existence of massless chiral edge excitations has important strong coupling consequences for the topological concept of an instanton vacuum. In the first part of this paper we elaborate on the effective action for “edge excitations” in the Grassmannian U (m + n)/U (m) × U (n) non-linear sigma model in the presence of the θ term. This effective action contains complete information on the low energy dynamics of the system and defines the renormalization of the theory in an unambiguous manner. In the second part of this paper we revisit the instanton methodology and embark on the non-perturbative aspects of the renormalization group including the anomalous dimension of mass terms. The non-perturbative corrections to both the β and γ functions are obtained while avoiding the technical difficulties associated with the idea of constrained instantons. In the final part of this paper we present the detailed consequences of our computations for the quantum critical behavior at θ = π. In the range 0 ? m, n ? 1 we find quantum critical behavior with exponents that vary continuously with varying values of m and n. Our results display a smooth interpolation between the physically very different theories with m = n = 0 (disordered electron gas, quantum Hall effect) and m = n = 1 (O (3) non-linear sigma model, quantum spin chains) respectively, in which cases the critical indices are known from other sources. We conclude that instantons provide not only a qualitative assessment of the singularity structure of the theory as a whole, but also remarkably accurate numerical estimates of the quantum critical details (critical indices) at θ = π for varying values of m and n.     

Characterization of two-emitter WOLED with no additional blocking layer

In this paper, white organic light emitting diodes (WOLEDs) utilizing two primary-color emitters with no additional blocking layer are fabricated. With a structure of ITO/2TNATA (20 nm)/NPB (20 nm)/NPB: rubrene (2%) (10 nm)/ADN (30 nm)/Alq₃ (20 nm)/LiF (1 nm)/Al (100 nm), a white light with CIE coordinates of (0.344, 0.372) is generated at a current density of 30 mA/cm² and the electroluminescence (EL) spectra consist of two broad bands around 456 nm (ADN) and 556 nm (NPB:rubrene). The device shows the low turn-on voltage and bright white emission with a power efficiency of 2.3 lm/W at a luminance of 100 cd/m². Through control of the location of the recombination zone and energy transfer, a stable white light emission is achieved. The maximum color shift is less than 0.02 units on the 1931 CIE x,y chromaticity diagram. Given the spectral power distribution of WOLED, the parameters of a light source (chromaticity coordinate, CCT, CRI, and the luminous efficacy) can be calculated. A MATLAB program for this purpose is developed in this paper. Based on this, the design of WOLED for an illumination and display system using a white emitter with color filter arrays is discussed.