Influence of coupling agent chain lengths on interfacial performances of polyarylacetylene resin and silica glass composites

The influence of chain lengths on interfacial performances of polyarylacetylene (PAA)/silica glass composites was studied. In order to obtain different chain lengths on substrates, methyltrimethoxysilane, propyltrimethoxysilane, octyltrimethoxysilane and dodecyltrimethoxysilane were grafted onto silica glass surface. Topographies of silica glass surface and the wetting ability of PAA resin on silica glass surface were characterized by atomic force microscopy (AFM) and surface free energy along with contact angles, respectively. At the same time, the interfacial adhesion was evaluated by shear strength testing. The failure mechanisms of composites were also analyzed by fracture morphologies. The results of the study indicate that with chain lengths of coupling agents on silica glass surface increasing, interfacial shear strengths of PAA/silica glass composites increase, while the wetting ability of PAA resin on silica glass surface decreases. The main mechanism for the improvement of the interfacial adhesion is physical entanglement interaction between the chain of coupling agent and the chain of PAA resin.     

Influence of interfacial reaction on interfacial performance of carbon fiber and polyarylacetylene resin composites

The influence of interfacial reaction on interfacial performance of carbon fiber/polyarylacetylene resin composites was studied. For this purpose, vinyltrimethoxysilane containing a double bond was grafted onto the carbon fiber surface to react with the triple bond of polyarylacetylene resin. The reaction between polyarylacetylene resin and vinyltrimethoxysilane was proved by reference to the model reaction between phenylacetylene and vinyltrimethoxysilane. Surface chemical analysis by XPS, surface energy determination from the dynamic contact angle, and the interfacial adhesion in composites was evaluated by interfacial shear strength test as well. It was found that vinyltrimethoxysilane, which can react with polyarylacetylene resin, had been grafted onto the carbon fiber surface. Furthermore, because the reaction between polyarylacetylene resin and vinyltrimethoxysilane took place at the interface, the interfacial adhesion in composites was significantly increased, and the improvement of interfacial adhesion was all attributed to the interfacial reaction.     

Enhancing the interfacial strength of glass/epoxy composites using ZnO nanowires

This paper investigated the application of ZnO nanowires (ZnO NW) to enhance the interfacial strength of glass/epoxy composites. ZnO NW were grown on glass fibers by hydrothermal method, tensile properties of bare and ZnO NW coated fibers were measured by single fiber tensile testing, wettability of fiber with resin was studied by contact angle measurements and finally the interfacial strength and mechanisms were determined by single fiber fragmentation testing of glass/epoxy composites. The surface coverage of ZnO NW on glass fibers was fairly uniform without formation of major clusters. The coating of ZnO NW slightly reduced the tensile strength and improved the tensile modulus of fibers. Wettability tests showed reduction in contact angles for ZnO NW coated fibers because of enhanced wetting and infiltration of epoxy resin into nanowires. In fragmentation testing of microcomposites, smaller and concentrated interfacial debonding zones for ZnO NW coated fibers indicated good stress transfer and strong interfacial adhesion. A new form of crossed and closely spaced stress patterns were observed for nanowires of high aspect ratios. The interfacial strength of ZnO NW coated fibers increased by at least 109% and by 430% on average, which was attributed to the increased surface area and mechanical interlocking provided by ZnO NW.     

The effect of interphase modification on carbon fiber/polyarylacetylene resin composites

Interfacial modification for carbon fiber (CF) reinforced polyarylacetylene (PAA) resin, a kind of non-polar, was investigated. The high carbon phenolic resin was used as coating to treat the surface of CF after oxidation. Atomic force microscopy (AFM) with force modulation mode was used to analyze the interphase of composite. The interlaminar shear strength (ILSS) and mechanical properties of CF/PAA composites were also measured. It was found that the CF/PAA composites treated with oxidation and coating after oxidation had transition area between carbon fiber and PAA resin. The existence of transition area led to the improvement of interfacial performance of composites. Specially, the thickness and stiffness of interphase of composite treated with coating after oxidation were more suitable for CF/PAA composites. Thus, the composite treated with coating after oxidation had the highest value of ILSS and the best mechanical properties.     

Friction and Wear Behaviors of Surface-Modified Carbon Fabric/Epoxy Resin Composites

Carbon fabric (CF) was pretreated by air-plasma bombardment and then further modified by deposition of polydopamine on the surface of the pretreated CF. Epoxy resin composites reinforced by unmodified or surface-modified carbon fabric were fabricated. The friction and wear behaviors of the resulting composites were evaluated in a ring-on-block contact mode. The flexural strength and Rockwell hardness of the composites were also evaluated. The morphologies of the worn surfaces of the unmodified and modified composites were analyzed by scanning electron microscopy. The surface treatment increased the surface roughness and changed the surface topography of the CF, which contributed to enhancing the interfacial adhesion of the composites and thus improved the mechanical properties and tribo-performance. The friction and wear properties of both the unfilled and filled composites were highly dependent on the load and sliding velocity. Moreover, the results were supplemented with scanning electron micrographs to help understand the possible wear mechanisms.     

Fiber-matrix adhesion mechanism of pitch-based carbon fiber composites

The fiber-matrix adhesion mechanism in high modulus pitch-based carbon fiber-epoxy matrix composites has been studied. The surface morphology and chemistry of the carbon fibers were examined by microscopic (SEM, STM), thermodynamic and spectroscopic (XPS, Raman) techniques. The interlaminar shear strength and transverse tensile strength of the composites made from surface-treated and untreated fibers were also obtained. In the microscopic analysis, there was no difference in the surface roughness between the surface-treated and untreated fibers. In the thermodynamic and spectroscopic analyses, surface treatment of the carbon fibers increased the amount of surface oxygen. The results indicated that the major role of the surface treatment on the carbon fiber-epoxy resin adhesion is not the mechanical interlocking effect by the surface roughness. The formation of surface oxygen-containing functional groups is assumed to account for the increase in fiber-matrix interfacial adhesion.     

Interface and its effect on the interlaminate shear strength of novel glass fiber/hyperbranched polysiloxane modified maleimide-triazine resin composites

Interface is the key topic of developing advanced fiber reinforced polymeric composites. Novel advanced glass woven fabric (GF) reinforced composites, coded as GF/mBT, were prepared, of which the matrix resin was hyperbranched polysiloxane (HBPSi) modified maleimide-triazine (mBT) resin. The influence of the composition of the matrix on the interfacial nature of the GF/mBT composites were studied and compared with that of the composite based on GF and BT resin using contact angle, X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM), and dielectric properties over wide frequency and temperature ranges. Results show that the interfacial nature of the composites is dependent on the chemistries of the matrices, mBT matrices have better interfacial adhesion with GF than BT resin owing to the formation of chemical and hydrogen bonds between mBT resin and GF; while in the case of mBT resins, the content of HBPSi also plays an important role on the interfacial feature and thus the macro-performance. Specifically, with increasing the content of HBPSi in the matrix, the interlaminate shear strength of corresponding composites significantly improves, demonstrating that better interfacial adhesion guarantees outstanding integrated properties of the resultant composites.     

Influence of Grafting Density of Diblock Copolymers on Interfacial Assembly Behavior and Interfacial Shear Strength of Glass Fiber/Polystyrene Composites

To investigate the influence of the grafting density and the molecular structure of block copolymers on the interfacial assembly behavior and interfacial shear strength, macromolecular coupling agents, hydroxyl-terminated poly(n-butyl acrylate-b-styrene) (HO-P(BA-b-S)) were synthesized by atom transfer radical polymerization, and then chemically anchored on the glass fiber surfaces to form a well-defined monolayer. The phase separation and 'hemispherical' domain morphologies of diblock copolymer brushes at the polystyrene/glass fiber interface were observed. The interfacial assembly morphology differs with changes in the grafting density of diblock copolymers. When the grafting density is greatest, the highest height difference of the hemispherical domain and the largest surface roughness are achieved, as well as the best interface shear strength. It was also found that the copolymer brush with a PBA block of the polymerization degree (Xn) about 77 is the optimal option for the interfacial adhesion of PS/GF composites. Thus, the grafting density and molecular structure of diblock copolymers determines the interfacial assembly behavior of copolymer brushes, and therefore the interfacial shear strength.     

The effect of interface on fracture mechanism of GF/PP composites using O2 plasma treatment

Polypropylene sheets are treated with oxygen plasma for the interfacial control of GF/PP composites. The interfacial strength between glass fabric and PP resin is estimated by the T-peel test method. The evaluation of T-peel test data is done by both the T-peel strength method and the T-peel amplitude method. The T-peel strength value and T-peel amplitude value were respectively increased to about 50% and 120% compared with each value of non-treated specimens. The T-peel strength relates to the surface energy on the PP-sheet and the T-peel amplitude relates to the fracture pattern of the delamination surface. From SEM observations on the delamination surface, many voids in the space enclosed with fiber bundles are observed in the case of non-treated specimen and no void and fiber bridging are observed on the plasma treated specimens. It is found that interfacial properties between fiber and resin are improved by this plasma process.     

Influence of surface treatment on mechanical behaviour of fumed silica/epoxy resin nanocomposites

The present paper shows the potential of fumed silica as nano-reinforcements in polymers, by considering the limitations and challenges one has to face dealing with nanoparticles in general. The dominating effect of the manufacturing route and surface properties of fumed silica influencing the resulting degree of dispersion and the interfacial adhesion were investigated by electron microscopy (TEM, SEM). The resulting (fracture-) mechanical properties of the fumed silica/epoxy composites were investigated for volume contents of 0.5 vol% and below. Independent of the surface modification, static and dynamic modulus decreased slightly by adding the fumed silica. Hence, the fracture toughness K _Ic turned out to be significantly increased (54%) adding only 0.5 vol% of surface modified fumed silica.     

Epoxy/Silica Nanohybrids or Nanocomposites: Atomic Force Microscopy and X-ray Photoelectron Spectroscopy Investigation of the Processing–Structure–Property Relationships

The structural and morphological features influencing the glass transition temperature of epoxy/silica nanohybrid and nanocomposite materials containing 25–30 phr of nanoscale silica phases are discussed in this letter to answer the questions related to the processing–structure–property relationships. X-ray photoelectron spectroscopy and atomic force microscopy are used to study the surface chemical structure and morphology of epoxy/silica nanohybrids and nanocomposites. Nanohybrids are synthesized via in situ sol-gel process, while the respective nanocomposites are prepared by mechanical blending of preformed silica nanoparticles into epoxy resin. Differential scanning calorimetry is used to determine glass transition temperature of different materials. The surface analytical characterizations reveal that in situ sol-gel process is more suitable for producing organic–inorganic hybrid materials with superior glass transition temperature owing to the achievement of stronger interfacial compatibility and greater crosslink density. A number of other factors affecting glass transition temperature are explored and discussed with reference to surface chemistry, microstructure, and morphology of epoxy/silica nanohybrids and nanocomposites, respectively.     

Evaluation of adhesion between glass/epoxy composite substrate and copper foil for printed circuit board applications

Adhesion between glass/epoxy composite substrate and copper foil was evaluated by 90° peeling test. Effect of fracture behavior and the peel strength on copper foil style was experimentally investigated using copper foils with various surface roughness. As mechanical anchoring effect increases with increased surface roughness, the surface roughness increased the surface roughness of copper foil strongly affected the peeling strength and local load variation during the test. The fracture behavior was characterized by secondary electron image and reflective electron image techniques of scanning electron microscopy (SEM). All of the specimens were found to fracture at the anchor points formed in the resin layer on the surface of the substrate. The experimental results were correlated to a formulation based on the theory of beams on elastic foundation, which is presented for predicting the adhesive strength in the adherend- adhesive system. In order to apply this formulation to a no adhesive system, such as FR-4/copper foil, an analytical model was proposed. In this model, a mixture phase of the copper with the surface resin in the substrate was regarded as the adhesive. The calculated results were in relatively good agreement with the experimental results. It was confirmed that the analysis model and evaluation method is useful to predict the peel strength due to the mechanical anchoring effect.     

Enhanced surface free energy of polyimide fibers by alkali treatment and its interfacial adhesion behavior to epoxy resins

In this article, polyimide (PI) fibers were modified by alkali treatment, and PI fiber-reinforced epoxy composites were fabricated. The effects of different alkali treatment times on the surface properties of the PI fibers and the adhesion behaviors of PI fiber/epoxy composites were studied. The surface morphologies, chemical compositions, mechanical properties, and surface free energy of the PI fibers were characterized by atomic force microscopy, X-ray photoelectron spectroscopy, single-fiber tensile strength analysis, and dynamic contact angle analysis, respectively. The results show that alkali treatment plays an important role in the improvement of the surface free energy and the wettability of PI fibers. We also found that, after the 3 min, 30 °C, 20 wt% NaOH solution treatment, the fibers possessed good mechanical properties and surface activities, and the interlaminar shear strength of the composites increased to 64.52 MPa, indicating good interfacial adhesion properties.     

The effect of surface treatment of carbon fiber on the flexural property of thermoplastic polyimide composite

Rare earth solution (RES) surface modification and air-oxidation methods were used to improve the interfacial adhesion of the carbon fiber reinforced polyimide (CF/PI) composite. The flexural property of the PI composites reinforced by the carbon fibers treated with different surface modification methods was comparatively investigated. Results showed that the flexural strength of CF/PI composite was improved after RES treatment. The improvement of impact and flexural property of the CF/PI composite was mainly due to the improvement in interfacial adhesion after RES treatment. X-ray photoelectron spectroscopy (XPS) study of carbon fiber surface showed that the oxygen concentration was obviously increased after RES treatment. The increase in the amount of organic functional groups increased the interfacial adhesion between CF and PI matrix.     

Weibull analysis of microbond shear strength at sisal fibre–polyester resin interfaces

An analysis has been made of the tensile strength of sisal fibres and the interfacial adhesion between fibres and polyester resin droplets. Density and microscopy methods were used to determine the cross-sectional area of the sisal fibres. The average tensile strength of treated sisal fibres decreased by a modest amount following treatment with 0.06 M NaOH. However, this treatment resulted in a substantial increase in the interfacial shear strength at the sisal fibre to polyester resin interface. Weibull analysis has been used successfully to analyse variability in tensile strengths and interfacial shear strength using probability of failure plots. Scanning electron microscopy has revealed the shape of resin droplets on the surface of treated and untreated sisal fibres and contact angles are much lower for droplets on treated fibres. Damage to the surface of fibres has been examined following shear testing. Weibull analysis is an effective tool for characterising highly variable fibre properties and evaluating the level of adhesion between polymer resin and the fibre surface.     

Effect of the surface roughness on interfacial properties of carbon fibers reinforced epoxy resin composites

The effect of the surface roughness on interfacial properties of carbon fibers (CFs) reinforced epoxy (EP) resin composite is studied. Aqueous ammonia was applied to modify the surfaces of CFs. The morphologies and chemical compositions of original CFs and treated CFs (a-CFs) were characterized by Atomic Force Microscopy (AFM), and X-ray Photoelectron Spectroscopy (XPS). Compared with the smooth surface of original CF, the surface of a-CF has bigger roughness; moreover, the roughness increases with the increase of the treating time. On the other hand, no obvious change in chemical composition takes place, indicating that the treating mechanism of CFs by aqueous ammonia is to physically change the morphologies rather than chemical compositions. In order to investigate the effect of surface roughness on the interfacial properties of CF/EP composites, the wettability and Interfacial Shear Strength (IFSS) were measured. Results show that with the increase of the roughness, the wettabilities of CFs against both water and ethylene glycol improves; in addition, the IFSS value of composites also increases. These attractive phenomena prove that the surface roughness of CFs can effectively overcome the poor interfacial adhesions between CFs and organic matrix, and thus make it possible to fabricate advanced composites based on CFs.     

Effect of Polyethylene Functionalization on Mechanical Properties and Morphology of PE/SiO2 Composites

In this study composites of high density polyethylene (HDPE) with various SiO₂ content were prepared by melt compounding using maleic anhydride grafted polyethylene (PE-g-MAH) as a compatibilizer. The composites containing 2, 4 and 6% by weight of SiO₂ particles were melt-blended in a co-rotating twin screw extruder. In all composites, polyethylene-graft-maleic anhydride copolymer (PE-g-MAH, with 0.85% maleic anhydride content) was added as a compatibilizer in the amount of 2% by weight. Morphology of inorganic silica filler precipitated from emulsion media was investigated. Mechanical properties and composite microstructure were determined by tensile tests and scanning electron microscopy technique (SEM). Tensile strength, yield stress, Young's modulus and elongation at break of PE/SiO₂ composites were mainly discussed against the properties of PE/PE-g-MAH/SiO₂ composites. The most pronounced increase in mechanical parameters was observed in Young's modulus for composites with polyethylene grafted with maleic anhydride. The increase in the E-modulus of PE/PE-g-MAH/SiO₂composites was associated with the compatibility and improvement of interfacial adhesion between the polyethylene matrix and the nanoparticles, leading to an increased degree of particle dispersion. This finding was verified on the basis of SEM micrographs for composites of PE/PE-g-MAH/4% by weight of SiO₂. The micrographs clearly documented that addition of only 2 wt% of the compatibilizer changed the composite morphology by reducing filler aggregates size as well as their number. Increased adhesion between the PE matrix and SiO₂ particles was interpreted to be a result of interactions taking place between the polar groups of maleic anhydride and silanol groups on the silica surface. These interactions are responsible for reduction of the size of silica aggregates, leading to improved mechanical properties.     

Improving the performance of conventional glass fiber epoxy matrix composites by incorporating nanodiamonds

Multiscale glass fiber epoxy matrix composites containing nanodiamonds were fabricated using vacuum bagging technique. Three different loadings of nanodiamonds were incorporated in epoxy resin after their functionalization through ozone-treatment, i.e., 0.1, 0.3 and 0.5 wt%. The functionalization of nanodiamonds was confirmed by infrared spectroscopy, which improved the dispersion of nanodiamond in epoxy resin thus improving the mechanical properties. Tensile, compression, flexural and interlaminar shear properties of the composites were improved. The tensile, compression and flexural strengths improved up to 36, 56 and 30% by the addition of 0.5 wt% nanodiamonds while the corresponding moduli increased to 30, 125 and 46%, respectively. An improvement of 38% in interlaminar shear strength was observed. The microscopy of the composites was performed using optical and electron microscopy and proper impregnation of glass fibers and the absence of the agglomerates of nanodiamonds were ensured. The homogeneous dispersion of nanodiamonds and their adhering role at fiber/matrix interface improved the mechanical properties of the composites. The developed composites are ideal candidate materials for engineering applications demanding high specific mechanical properties.     

Interphase characterization in epoxy resin/carbon fibre composites

In this paper, interphase properties of carbon fibre/epoxy resin single-fibre model and unidirectional (UD) composites are reported. To study the contribution of the carbon fibre surface chemistry and morphology and of the resin itself to the overall properties of the composites, untreated, oxidized and sized fibres are used with bi- and tetrafunctional, diglycidylether of Bisphenol A, DGEBA and tetraglycidyl 4,4'-diaminodiphenylmethane, TGDDM-based resins, cured with amine and anhydride hardeners. Adsorption measurements and single fibre contact angle experiments, as well as the pull-out test were applied to characterize the surface of carbon fibre and the interfacial shear strength with different matrices. It was shown that the presence of the size on the surface can drastically affect the wettability as well as the starting rate of the cure reaction of epoxide in the vicinity of the fibre surface, as revealed by FTIR microscopy. Different elastic-plastic behavior of model composites before debonding is found for untreated, oxidized and sized fibres, due to the various interphase structures formed. Both micro-and macromechanical properties of the composites are found to be significantly affected by the matrix properties. The role of the surface treatment of fibers becomes especially important in high performance resin systems.     

Effect of the molecular weight of sizing agent on the surface of carbon fibres and interface of its composites

The influence of different molecular weight sizing agent on the performances of carbon fibres and carbon fibres composites were studied. Three different kinds of molecular weight sizing were used. Surface composition of the fibres modified with aqueous sizing and topographies of carbon fibres surface were characterized by X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM) and scanning electron microscope (SEM). The interlaminar shear strength and hygrothermal ageing test have been used to study the effect of fibres coatings on the adhesion of surface. The results of the study indicate that the molecular weight of sizing agent has an important influence to the carbon fibres and carbon fibres composites. The high and low molecular weight sizing agent decreased the interfacial shear strengths and hygrothermal ageing of carbon fibres composite. The moderate molecular weight of sizing agent showed an improvement of the interfacial adhesion and hygrothermal ageing.