Facile synthesis and characterization of acid-base bifunctionalized mesoporous silica

A simple acid-base bifunctionalized approach has been developed through grinding the precursors, magnesium and aluminium nitrates, with the as-prepared SBA-15, and then the generation of acid-base active sites and removal of host template were combined into a single step in the subsequent calcination procedure. A series of acid-base bifunctional mesoporous materials MgO-Al₂O₃-SBA-15 (MA-SBA-15) have been successfully synthesized by means of this approach. X-ray diffraction (XRD), high-resolution transmission electron microscopes (HRTEMs), N₂ adsorption, FT-IR spectra, ²⁷Al and ²⁹Si magic-angle-spinning (MAS) NMR, NH₃- and CO₂-temperature programmed desorption (TPD), pyridine adsorption were employed to characterize the resultant mesoporous materials. The results indicate that the guests can be well dispersed in the channel of SBA-15, and the resultant materials exhibit excellent acid-basic properties with well mesoporous backbone, which make it possessing high activity for the synthesis of ethyl methyl carbonate, an important asymmetric carbonate ester compound.     

Surface-modified mesoporous silica with ferrocene derivatives and its ultrasound-triggered functionality

Novel ferrocene derivatives designed as gatekeepers were successfully composed on the pore outlet of amino-functionalized mesoporous silica by post-synthesis grafting where the peptide bond of the amine group (-NH₂) of mesoporous silica was linked with the carboxylic acid group (-COOH) of both ends of the ferrocene derivatives. The materials of the amine-functionalized mesoporous silica (NH₂-MS) and ferrocene-functionalized mesoporous silica (Fc-CONH-MS) were characterized using X-ray diffractions (XRD), Fourier-transform infrared (FT-IR), N₂ sorption isotherms, solid-state NMR spectra, scanning electron microscopy (SEM), energy dispersive X-ray (EDX), transmission electron microscopy (TEM), and UV-vis absorption spectra. The ferrocene attached to the mesoporous silica pore outlet was cleavaged by ultrasound irradiation, which opened the closed-pore outlets, suggesting a possible application for controlled release drug carrier.     

H2O2水热合成双峰介孔硅MCM-48球

在温和的条件下,通过H₂O₂水热处理预合成的MCM-48,得到了有序的双峰介孔硅MCM-48球． 结果表明H₂O₂对于同时去除有机模板剂及形成双峰介孔硅MCM-48球具有重要的作用．采用XRD、TEM、FT-IR和N₂吸附-解吸等方法对双峰介孔MCM-48材料进行了表征,对双峰介孔MCM-48的形成机理也进行了探讨．     

Influence of Fe ions in characteristics and optical properties of mesoporous titanium oxide thin films

Fe-doped mesoporous titanium dioxide (M-TiO₂-Fe) thin films have been prepared on indium tin oxide (ITO) glass substrates by sol–gel and spin coating methods. All films exhibited mesoporous structure with the pore size around 5–9 nm characterized by small angle X-ray diffraction (SAXRD) and further confirmed by high resolution transmission electron microscopy (HRTEM). Raman spectra illustrated that lower Fe-doping contributed to the formation of nanocrystalline of M-TiO₂-Fe thin films. X-ray photoelectron spectroscopy (XPS) data indicated that the doped Fe ions exist in forms of Fe³⁺, which can play a role as e⁻ or h⁺ traps and reduce e⁻/h⁺ pair recombination rate. Optical properties including refractive indices/n, energy gaps/E_g and Urbach energy width/E₀ of the thin films were estimated and investigated by UV/vis transmittance spectra. The presence of Fe content extended the light absorption band and decreased the values of n, implying enhanced light response and performance on dye-sensitized solar cells (DSSC). The optimum Fe content in M-TiO₂-Fe thin films is determined as 10 mol%, for its compatibility of well crystalline and well potential electron transfer performance.     

Mesoporous silica-coated NaYF4:Yb3+, Er3+ particles for drug release

NaYF₄:Yb³⁺, Er³⁺ nanoparticles were successfully prepared by a polyol process using diethyleneglycol (DEG) as solvent. These NaYF₄:Yb³⁺, Er³⁺ nanoparticles can be coated with mesoporous silica using nonionic triblock copolymer EO₂₀PO₇₀EO₂₀ (P 123) as structure-directing agent and other materials. The composites can load ibuprofen and release the drug in the phosphate buffer solution (PBS). The composites were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), nitrogen absorption/desorption isotherms, fluorescence spectra, and UV/Vis absorption spectra, respectively. The composites have the mesoporous structure. In addition, the composites emit red fluorescence (from Er³⁺) under 980 nm near infrared laser excitation, which can be used as fluorescent probes in the drug-delivery system.     

Engineering the Internal Structure of Magnetic Silica Nanoparticles by Thermal Control

Calcination of hydrated iron salts in the pores of both spherical and rod‐shaped mesoporous silica nanoparticles (NPs) changes the internal structure from an ordered 2D hexagonal structure into a smaller number of large voids in the particles with sizes ranging from large hollow cores down to ten nanometer voids. The voids only form when the heating rate is rapid at a rate of 30 °C min^?1. The sizes of the voids are controlled reproducibly by the final calcination temperature; as the temperature is decreased the number of voids decreases as their size increases. The phase of the iron oxide NPs is α‐Fe₂O₃ when annealed at 500 °C, and Fe₃O₄ when annealed at lower temperatures. The water molecules in the hydrated iron (III) chloride precursor salts appear to play important roles by hydrolyzing Si? O? Si bonding, and the resulting silanol is mobile enough to affect the reconstruction into the framed hollow structures at high temperature. Along with hexahydrates, trivalent Fe³⁺ ions are assumed to contribute to the structure disruption of mesoporous silica by replacing tetrahedral Si⁴⁺ ions and making Fe? O? Si bonding. Volume fraction tomography images generated from transmission electron microscopy (TEM) images enable precise visualization of the structures. These results provide a controllable method of engineering the internal shapes in silica matrices containing superparamagnetic NPs.     

Highly selective fluorescent chemosensor for detecting Hg(II) in water based on pyrene functionalized core–shell structured mesoporous silica

Novel pyrene functionalized mesoporous core–shell structured silica (denoted as SiO₂@mSiO₂/Py-Si) was designed and synthesized as a highly selective fluorescent chemosensor for detecting Hg²⁺ in water. The core–shell structured silica was prepared by a simple sol–gel process through coating SiO₂ nanospheres with a layer of ordered mesoporous silica. The surface of outer mesoporous silica shell was then further functionalized by the fluorescent chromophore alkoxysilane modified pyrene (Py-Si). XRD data confirmed that the hexagonal ordered mesoporous structure was preserved after functionalization. The chemosensing material successfully exhibited a remarkable “turn on” response toward Hg²⁺ over miscellaneous metal ions. A good linear response towards Hg²⁺ in the concentration range of 10^?8–10^?4 M was constructed with R²=0.9913. Most importantly, a satisfactory detection limit of 3.4×10^?9 g mL^?1 (down to ppb level) was obtained, which is 100 times lower than our previous report of covalently grafted Py-OH to the bulk mesoporous silica SBA-15. These results indicated that SiO₂@mSiO₂/Py-Si can be used as a highly selective and sensitive fluorescence sensor for Hg²⁺.     

Silica-coated Y2O3:Eu nanoparticles and their luminescence properties

Crystalline Y₂O₃:Eu is of paramount significance in rare earth materials and research on luminescence spectra. In this work, the nanocrystalline Y₂O₃:Eu was coated with silica by a facile solid state reaction method at room temperature. The transmission electron microscope (TEM) photographs showed that the prepared Y₂O₃:Eu particle is polycrystalline with the size of 20 nm, the size of silica-coated particle is about 25 nm. The XPS spectra indicated that the silica layer is likely to interact with Y₂O₃:Eu by a Si-O-Y chemical bond. The luminescence spectra showed that the intensity of ground samples is lower than that of unground ones, the intensity of silica-coated phosphors is higher than that of the ground samples, while almost the same as that of the unground ones. Therefore, the silica coating decreases the surface defects of nanoparticles of the nanocrystalline Y₂O₃:Eu, thus increasing their luminescent intensity.     

Preparation and visible light photocatalytic activity of mesoporous N, S-codoped TiO2(B) nanobelts

The mesoporous N, S-codoped TiO₂(B) nanobelts are synthesized via hydrothermal synthesis and post-treatment, and characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), N₂ adsorption-desorption measurements (BET), X-ray photoelectron spectra (XPS), and UV-vis diffuse reflectance spectra (DRS). The results show that the prepared samples are mesoporous structured and exhibit stronger absorption in the visible light region with red shift in the absorption edge. The photocatalytic activity of N, S-codoped mesoporous TiO₂(B) nanobelts is evaluated by the photocatalytic photodegradation of potassium ethyl xanthate (KEX) under visible light irradiation. It is found that the photocatalytic activity of the prepared samples increases with increasing the molar ratio of thiourea to Ti (R). At R = 3, the photocatalytic activity of the N, S-codoped TiO₂(B) sample TBLTS-3 reaches a maximum value. With further increasing R, the photocatalytic activity of the sample decreases. The high photocatalytic activity of N, S-codoped TiO₂(B) nanobelts can be attributed to the balance between strong absorption in visible light region and low recombination rate of electron/hole pairs.     

Synthesis and characterization of ionic liquid-functionalized alumino-silicate MCM-41 hybrid mesoporous materials

Ionic liquid-functionalized alumino-silicate MCM-41 hybrid mesoporous materials have been synthesized with two-step approach, by means of in situ skeleton doping with aluminium and post surface grafting with N-methylimidazole ionic liquid groups. The samples were characterized by X-ray diffraction (XRD), high resolution transmission electron microscope (HRTEM), N₂ adsorption-desorption, Fourier transform infrared (FTIR) spectra, ²⁷Al and ¹³C MAS NMR spectra and temperature-programmed desorption (TPD) of NH₃. The results indicated that the bifunctionalized MCM-41 possessed ordered mesostructure. Aluminium was efficiently introduced into the framework of the mesostructure, generating Lewis and Brönsted acid sites. N-methylimidazole ionic liquid groups were covalently grafted onto the surface of mesoporous materials. The as-synthesized bifunctional MCM-41 showed good catalytic performance in the coupling reaction of CO₂ and propylene oxide.     

One-step synthesis of hydrophobic mesoporous silica and its application in nonylphenol adsorption

Highly CH₃-functionalized mesoporous silica with nearly spherical morphology was synthesized under acidic conditions by co-condensation of two different silica precursors polymethylhydrosiloxane (PMHS) and tetraethoxysilane (TEOS) in the presence of triblock copolymer P123 as template. XRD, N₂ adsorption–desorption, HRTEM, SEM and ²⁹Si MAS NMR were used to identify its highly-ordered mesopore array structure, nearly spherical particle morphology and CH₃ functionalization of the as-synthesized material. The resulting hydrophobic mesoporous silica possessed regular mesochannel arrays, indicating that the introduction of PMHS had little impact on the formation of an ordered mesostructure. Also, PMHS played an important role in morphology control and organic functionalization, ensuring nearly spherical particle morphology and high CH₃ functionalization degree of the obtained mesoporous silica material. As compared with pristine mesoporous silica SBA-15, the hydrophobic mesoporous silica showed the higher adsorption performance when they were used as adsorbents to remove organic pollutant nonylphenol at a very low concentration from aqueous solution.     

Biosynthesis and magnetic properties of mesoporous Fe3O4 composites

Magnetic Fe₃O₄ materials with mesoporous structure are synthesized by co-precipitation method using yeast cells as a template. The X-ray diffraction (XRD) pattern indicates that the as-synthesized mesoporous hybrid Fe₃O₄ is well crystallized. The Barrett-Joyner-Halenda (BJH) models reveal the existence of mesostructure in the dried sample which has a specific surface area of 96.31 m²/g and a pore size distribution of 8-14 nm. Transmission electron microscopy (TEM) measurements confirm the wormhole-like structure of the resulting samples. The composition and chemical bonds of the Fe₃O₄/cells composites are studied by Fourier transform infrared (FT-IR) spectroscopy. Preliminary magnetic properties of the mesoporous hybrid Fe₃O₄ are characterized by a vibrating sample magnetometer (VSM). The magnetic Fe₃O₄/cells composites with mesoporous structure have potential applications in biomedical areas, such as drug delivery.     

Effect of drying technique on the physicochemical properties of sodium silicate-based mesoporous precipitated silica

The conventional drying (oven drying) method used for the preparation of precipitated mesoporous silica with low surface area (>300 m²/g) and small pore volume is often associated with a high production cost and a time consuming process. Therefore, the main goal of this study was to develop a cost-effective and fast drying process for the production of precipitated mesoporous silica using inexpensive industrial grade sodium silicate and spray drying of the precipitated wet-gel silica slurry. The precipitated wet-gel silica slurry was prepared from an aqueous sodium silicate solution through the drop-wise addition of sulfuric acid. Mesoporous precipitated silica powder was prepared by drying the wet-gel slurry with different drying techniques. The effects of the oven drying (OD), microwave drying (MD), and spray drying (SD) techniques on the physical (oil, water absorption, and tapping density), and textural properties (specific BET surface area, pore volume, pore size, and % porosity) of the precipitated mesoporous silica powder were studied. The dried precipitated mesoporous silica powders were characterized with field-emission scanning electron microscopy; Brunauer, Emmett and Teller and BJH nitrogen gas adsorption/desorption methods; Fourier-transform infrared spectroscopy; thermogravimetric and differential analysis; N₂ physisorption isotherm; pore size distribution and particle size analysis. There was a significant effect of drying technique on the textural properties, such as specific surface area, pore size distribution and cumulative pore volume of the mesoporous silica powder. Additionally, the effect of the microwave-drying period on the physicochemical properties of the precipitated mesoporous silica powder was investigated and discussed.     

Thermal stability of second generation carbosilane dendrimers with peripheral ammonia groups

Spinel nickel zinc ferrite nanowires were successfully prepared in mesoporous silica SBA-15 as a host matrix. The powder was annealed at a range of temperatures (500–900 °C) with heating rate 0.5 °C/min. The required NiZnFe₂O₄ phase was obtained at 700 °C. The specific surface area S_BET data revealed that the surface area of the mesoporous silica after annealing was decreased from 821 to 90 m²/g which indicated that the spinal ferrite fills the channels of mesoporous materials. The one-dimensional spinel nanostructures were characterized by X-ray diffraction, infrared spectroscopy, vibrating sample magnetometer, and transmission electron microscopy before and after a selective removal of the silica template in aqueous solution of NaOH or HF. The presence of SBA-15 lowers the formation temperature of nickel zinc ferrite nanowires compared to the corresponding bulk material. The magnetic properties revealed a high saturation magnetization level (~43 emu/g) for the Ni–Zn nanowires at 900 °C.     

Far IR transmission spectra of an YBa2Cu3O7−δ thin film

Abstract

The FIR transmission of an YBa₂Cu₃O_7-δ film 1000 Å thick deposited on an MgO plate has been studied from 20 cm^?1 to 4000 cm^?1 at T = 300 K, and at 120 K, 80 K and 7 K. i) The spectra for the normal state are well fitted if a mid-IR oscillator of high strength and high damping is added to the simplest Drude model. ii) The spectra for the superconductive state do not show significant variations of transmission vs. temperature for ω > 120 cm^?1, which should be in agreement with a weak BCS coupling 2Δ = 3.5 kT_c . iii) The FIR transmission at 7 K for ω = 20 cm^?1 is not zero (around 1%) and seems to confirm that the low-temperature perovskite is made of two phases: a superconducting, and a normal one, the proportion of the first one increasing when the film temperature is decreased.     

Synthesis and Characterization of Monodispersed SiO2@Y3Al5O12:Er3+ Core-Shell Particles

Submicron core-shell structure particles SiO₂@Y₃Al₅O₁₂:Er³⁺, which silica spherical particles was coated with an yttrium aluminum garnet (Y₃Al₅O₁₂) layer doped with Er³⁺, were prepared by the modified Pechini-Type sol-gel method for the first time. The structure and morphology of samples were detected by the X-ray powder diffraction (XRD) measurement, field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM), respectively. The results indicate that well-crystallized garnet nanocrystallines were formed on the surface of the silica particles. The luminescent spectra in near infrared and visible region of the core-shell structured SiO₂@Y₃Al₅O₁₂:Er³⁺ powders were also investigated and compared with those of the pure Y₃Al₅O₁₂:Er³⁺ and the Er³⁺ doped silicate glass. The results show that mono-dispersed SiO₂@Y₃Al₅O₁₂:Er³⁺ core-shell spherical particles with the near infrared, red and green luminescent emissions under the excitation of 980 nm laser diode have been successfully synthesized.     

Selective ethanol gas sensing behavior of mesoporous n-type semiconducting FeNbO4 nanopowder obtained by niobium–citrate process

Beyond the most investigated mesoporous silica and carbon based materials, metal oxides have attracted considerable interest due to their more diverse electronic functionality, which includes gas sensing activities, semiconductor characteristics and magnetic properties. In this paper, we describe the fabrication, characterization and application of mesoporous FeNbO₄ nanopowder for ethanol gas sensing application. FeNbO₄ nanopowder was synthesized via the niobium–citrate complex method, without using any surfactant and size selection medium. Thermal stability and structure of the nanopowder was analyzed by thermogravimetric analysis (TG/DTA) and X-ray diffraction analysis (XRD). Structural analysis confirmed the formation of FeNbO₄ with monoclinic structure. The particle size, electrical and optical properties were also systemically investigated by means of transmission electron microscopy (TEM), impedance and diffused reflectance spectra. Nitrogen adsorption isotherms of the FeNbO₄ were type IV with hysteresis loops of type H₃ indicating well-defined pore structure with mesoporous nature. The sensing characteristics of FeNbO₄ nanopowder such as sensitivity, operating temperature and response time, were studied in the presence of ethanol (C₂H₅OH). Experimental result confirmed that a higher response to ethanol at relatively lower operating temperature of 200 °C.     

Hydrogen bonds at silica–CO2 saturated water interface under geologic sequestration conditions

To investigate the effects of sequestration condition on hydrogen bonds between mineral and water, molecular dynamics simulations have been performed. The simulations were conducted at conditions related with geologic sequestration sites: pressure (3.1–32.6 MPa), temperature (318 and 383 K), salinity (0–3 M), salt (NaCl and CaCl₂) and silica surface models Q² (geminal), Q³ (isolated) and amorphous Q³. The hydrogen bonds were classified into four types: silica–silica, silica–dissolved CO₂, silica–water as donors and silica–water as acceptors. The mean numbers of hydrogen bonds for each type were analysed. The results show that: (1) silica surface silanol groups do not form H-bonds with dissolved CO₂ molecules in water (brine); (2) The mean number of hydrogen bonds between silanol groups follows the order: Q² > amorphous Q³ > Q³; (3) The mean number of hydrogen bonds between silanol and water molecules follows the order: Q³ > amorphous Q³ > Q².     

Mesoporous silica templated zirconia nanoparticles

Nanoparticles of zirconium oxide (ZrO₂) were synthesized by infiltration of a zirconia precursor (ZrOCl₂·8H₂O) into a SBA-15 mesoporous silica mold using a wet-impregnation technique. X-ray diffractometry and high-resolution transmission electron microscopy show formation of stable ZrO₂ nanoparticles inside the silica pores after a thermal treatment at 550 °C. Subsequent leaching out of the silica template by NaOH resulted in well-dispersed ZrO₂ nanoparticles with an average diameter of ~4 nm. The formed single crystal nanoparticles are faceted with 110 surfaces termination suggesting it to be the preferred growth orientation. A growth model of these nanoparticles is also suggested.     

Novel luminescent hybrid materials by covalently anchoring 2-[3-(triethoxysilyl) propyl-1H-Benz [de]isoquinoline-1, 3(2H)-dione to bimodal mesoporous materials

We report on the synthesis of luminescent hybrid mesoporous materials (LHMS) by covalently anchoring 2-[3-(triethoxysilyl) propyl-1H-Benz [de]isoquinoline-1, 3(2H)-dione to bimodal mesoporous materials (BMMs) through postsynthesis methods. The resulting samples were characterized by powder X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), N₂ adsorption/desorption isotherms, transmission electron microscopy (TEM), ²⁹Si NMR analysis, elemental analysis, and fluorescence measurements. The results revealed that luminescent organic molecules have been successfully introduced into the pore channels of BMMs without disrupting the structure, whereas the ordering degree of BMMs framework decreased after functionalization. The obtained materials (LHMS-10) showed excellent luminous performance, and the emission peak shifted to a lower wavelength in comparison with that of pure luminescent dyes (from 464 to 454 nm) because of the polarity of the silica matrix. And the amount of fluorescence molecule had some influence on the luminescence behavior, which was also investigated and discussed. It can be concluded that the fluorescence properties of the dye molecule can be controlled at will by the loading amount.