Ion extraction from the surface ablated materials in electric fields using an intense femtosecond laser pulse

In order to develop a femtosecond laser ablation (fsLA) ion source for TOF mass spectrometry, we have analyzed time-resolved images of laser-induced fluorescence from Sm⁺ ions produced by fsLA of a solid samarium in electric fields. The polarity and the strength of electric fields had a remarkable effect on the expansion of Sm⁺ ions. Moreover, accelerating electric fields elongated the duration of the ion emission from the samarium surface in fsLA, which degraded time-focusing of the ions. We have found that suppression the continuous ion emission caused by fsLA in electric fields is most important in TOF measurements.     

Ultra fast melting process in femtosecond laser crystallization of thin a-Si layer

In this paper, we investigated the mechanism of crystallization induced by femtosecond laser irradiation for an amorphous Si (a-Si) thin layer on a crystalline Si (c-Si) substrate. The fundamental, SHG, THG wavelength of a Ti:Sapphire laser was used for the crystallization process. To investigate the processed areas we performed Laser Scanning Microscopy (LSM), Transmission Electron Microscopy (TEM) and Imaging Pump-Probe measurements. Except for 267 nm femtosecond laser irradiation, the crystallization occurred well. The threshold fluences for the crystallization using 800 nm and 400 nm femtosecond laser irradiations were 100 mJ/cm² and 30 mJ/cm², respectively. TEM observation revealed that the crystallization occurred by epitaxial growth from the boundary surface between the a-Si layer and c-Si substrate. The melting depths estimated by Imaging Pump-Probe measurements became shallower when the shorter wavelength was used.     

Femtosecond laser embedded grating micromachining of flexible PDMS plates

We report on the femtosecond laser micromachining of photo-induced embedded diffraction grating in flexible Poly (Dimethly Siloxane) (PDMS) plates using a high-intensity femtosecond (130 fs) Ti: sapphire laser (λ_p = 800 nm). The refractive index modifications with diameters ranging from 2 μm to 5 μm were photo-induced after the irradiation with peak intensities of more than 1 × 10¹¹ W/cm². The graded refractive index profile was fabricated to be a symmetric around from the center of the point at which femtosecond laser was focused. The maximum refractive index change (Δn) was estimated to be 2 × 10⁻³. By the X-Y-Z scanning of sample, the embedded diffraction grating in PDMS plate was fabricated successfully using a femtosecond laser.     

Electrical transport characteristic of carbon nanotube after mass-separated ultra-low-energy oxygen ion beams irradiation

Mass-separated ultra-low-energy oxygen ion beams were irradiated to the single-walled carbon nanotubes (SWCNTs) under an ultra-high-vacuum pressure of 10⁻⁷ Pa for the purpose of achieving n-type conduction of nanotubes. The ion beam energy was 25 eV, which was close to the displacement energy of graphite. The incident angle of the ion beam was normal to the target nanotube. The ion dose ranged from 3.3 × 10¹¹ to 3.8 × 10¹² ions/cm². The structure of SWCNTs after the ion irradiation was investigated. The CNTs still have a clear single-walled structure after the ion irradiation. The graphite structure is distorted and some defects are induced in the nanotube by the oxygen irradiation. The oxygen ions with the ion energy of 25 eV are irradiated to the field effect transistor (FET) device with the nanotube channel. The n-type characteristic appears upon the oxygen ion irradiation, and the device exhibits ambipolar behavior. The defects induced by the ion irradiation may act as the n-type dopants.     

Morphology and composition on Al surface irradiated by femtosecond laser pulses

We study the surface chemicals and structures of aluminum plates irradiated by scanning femtosecond laser pulses in air for a wide range of laser fluence from 0.38 to 33.6 J/cm². X-ray photoelectron spectroscopy and X-ray diffraction analyses indicate clearly that crystalline anorthic Al(OH)₃ is formed under femtosecond laser pulse irradiation. Besides aluminum hydroxide, crystalline Al₂O₃ is also found in the samples irradiated at high laser fluence. Field emission scanning electron microscopy demonstrates that the surfaces of the samples irradiated with low laser fluence are colloidal-like and that nanoparticles with a few nanometers in size are embedded in glue-like substances. For high laser fluence irradiated samples, the surfaces are highly porous and covered by nanoparticles with uniform size of less than 20 nm.     

SHI induced silicide formation and surface morphology at Co/Si system

Ion beam mixing is a useful technique to produce modifications at the surface and interface of the solid material. In the present work, ion beam induced modifications at Co/Si interface using 120 MeV Au-ion irradiation has been studied at ion fluences in the range of 10¹² to 10¹⁴ ions/cm² by secondary ion mass spectroscopy (SIMS) technique and calculated mixing efficiency at the interface. Silicide formation has been discussed on the basis of swift heavy ion (SHI) irradiation induced effects. Surface morphology and roughness of irradiated system with fluence 5 × 10¹³ and 1 × 10¹⁴ ions/cm² is studied by scanning tunneling microscopy (STM). Roughness of the surface shows marks of melting process and confirms the appearance of some pinholes in the reacted Co/Si system. Comparative study was also undertaken on annealed sample at 300 °C and then irradiated at a dose 1 × 10¹⁴ ions/cm².     

Nanostructures on SiC surface created by laser microablation

Silicon carbide (SiC), as it is well-known, is inaccessible to usual methods of technological processing. Consequently, it is important to search for alternative technologies of processing SiC, including laser processing, and to study the accompanying physical processes. The work deals with the investigation of pulsed laser radiation influence on the surface of 6H-SiC crystal. The calculated temperature profile of SiC under laser irradiation is shown. Structural changes in surface and near-surface layers of SiC were studied by atomic force microscopy images, photoluminescence, Raman spectra and field emission current-voltage characteristics of initial and irradiated surfaces. It is shown that the cone-shaped nanostructures with typical dimension of 100-200 nm height and 5-10 nm width at the edge are formed on SiC surface under nitrogen laser exposure (λ = 0.337 μm, t_p = 7 ns, E_p = 1.5 mJ). The average values of threshold energy density 〈W_thn〉 at which formation of nanostructures starts on the 0 0 0 1 and surfaces of n-type 6H-SiC(N), nitrogen concentration n_N ≅ 2 × 10¹⁸ cm⁻³, are determined to be 3.5 J/cm² and 3.0 J/cm², respectively. The field emission appeared only after laser irradiation of the surface at threshold voltage of 1000 V at currents from 0.7 μA to 0.7 mA. The main role of the thermogradient effect in the processes of mass transfer in prior to ablation stages of nanostructure formation under UV laser irradiation (LI) was determined. We ascertained that the residual tensile stresses appear on SiC surface as a result of laser microablation. The nanostructures obtained could be applied in the field of sensor and emitting extreme electronic devices.     

Desorption of cluster ions from adsorbed methane under cryogenic condition by low-energy ion irradiation

We have investigated ion desorption from adsorbed methane following keV He⁺ ion irradiation. The thickness of the adsorbed layer was precisely controlled. For mono-layered methane, only monomer ions (CH_x⁺) were desorbed by 1 keV He⁺ ion irradiation. On the other hand, a large number of cluster ions (C_nH_x⁺) up to n = 20 were desorbed from multi-layered film. Among cluster ions, molecular ions with CC bonds were found, which indicates that chemical bonds are newly formed by ion irradiation. Based on the results for thickness dependences of the mass spectral patterns, it was elucidated that the monomer ions are desorbed from the top surface layer through single electron excitation. While the cluster ions are formed mainly in the inside of the layers along the nuclear track due to the high-density electronic excitation, which is produced by nuclear collision between incident He⁺ ions and frozen molecules.     

Simultaneous three-photon absorption induced ultraviolet upconversion in Pr:Y2SiO5 crystal by femtosecond laser irradiation

Near-infrared to ultraviolet upconversion luminescence was observed in the Pr³⁺:Y₂SiO₅ crystal with 120 fs, 800 nm infrared laser irradiation. The observed emissions at around 270 nm and 305 nm could be assigned to 5d → 4f transitions of Pr³⁺ ions. The relationship between the upconversion luminescence intensity and the pump power of the femtosecond laser reveals that the UV emission belongs to simultaneous three-photon absorption induced upconversion luminescence.     

Ablation process of silica glass induced by laser plasma soft X-ray irradiation

Silica glass can be machined by irradiation with laser plasma soft X-rays on nano- and micrometer scale. We have investigated the ablation process of silica glass induced by laser plasma soft X-ray irradiation. We observed ionic and neutral species emitted from silica surfaces after irradiation. Dominant ions and neutrals are O⁺ and Si⁺ ions and Si, O, SiO and Si₂ neutrals, respectively. The ions have kinetic energies of 13 and 25 eV, which are much higher than those of particles emitted by evaporation. The energy of laser plasma soft X-rays absorbed to silica glass at a fluence of 1.4 J/cm² is estimated to be 380 kJ/cm³, which is higher than the binding energy of SiO₂ of 76 kJ/cm³. These results suggest that the most of the bonds in silica glass are broken by absorption of laser plasma soft X-rays, that several percent of the atoms are ionized, and that neutral atoms are emitted together with repulsive ions. The process possibly enables us to fabricate nano structures.     

In situ observation of photo-bleaching in human single living cell excited by a NIR femtosecond laser

The photo-bleaching of single living cells excited by femtosecond laser irradiation was observed in situ to study the nonlinear interaction between ultrafast laser pulses and living human breast MDA-MB-231 cells. We conducted a systematic study of the energy dependence of plasma-mediated photo-disruption of fluorescently labeled subcellular structures in the nucleus of living cells using near-infrared (NIR) femtosecond laser pulses through a numerical aperture objective lens (0.75 NA). The behavior of photo-bleached living cells with fluorescently labeled nuclei was observed for 18 h after femtosecond laser irradiation under a fluorescence microscope. The photo-bleaching of single living cells without cell disruption occurred at between 470 and 630 nJ. To study the photo-disruption of subcellular organelles in single living cells using the nonlinear absorption excited by a NIR femtosecond laser pulse, the process of photo-bleaching without photo-disruption provides key information for clarifying the nonlinear interaction between NIR ultrashort, high-intensity laser light and transparent fluorescently labeled living cells.     

Argon ions induced thermoluminescence properties of Ba0.12Sr0.88SO4 phosphor

Thermoluminescence properties of barium strontium mixed sulfate have been studied by irradiation with Argon ions. The sample was recrystallized by chemical co-precipitation techniques using H₂SO₄. The X-ray diffraction study of prepared sample suggests the orthorhombic structure with average grain size of 60 nm. The samples were irradiated with 1.2 MeV Argon ions at fluences varying between 10¹¹ and 10¹⁵ ions/cm². The argon ions penetrate to the depth of 1.89 μm and lose their energy mainly via electronic stopping. Due to ion irradiation, a large number of defects in the sample are formed. Thermally stimulated luminescence (TSL) glow curves of ion irradiated Ba_0.12Sr_0.88SO₄ phosphor exhibit broad peak with maximum intensity at 495 K composed of four overlapping peaks. This indicates that different sets of traps are being activated within the particular temperature range each with its own value of activation energy (E) and frequency factor (s). Thermoluminescence (TL) glow curves were recorded for each of the ion fluences. A linear increase in intensity of TL glow peaks was found with the increase in ion dose from 59 kGy to 5.9 MGy. The kinetic parameters associated with the prominent glow peaks were calculated using glow curve deconvolution (GCD), different glow curve shape and sample heating rate methods.     

Characterization of laser-generated silicon plasma

A study of visible laser ablation of silicon, in vacuum, by using 3 ns Nd:YAG laser radiation is reported. Nanosecond pulsed ablation, at an intensity of the order of 10¹⁰ W/cm², produces high non-isotropic emission of neutrals and ionic species. Mass quadrupole spectrometry, coupled to electrostatic ion deflection, allows estimation of the energy distributions of the emitted species from plasma. Neutrals show typical Boltzmann-like distributions while ions show Coulomb-Boltzmann-shifted distributions depending on their charge state. Time-of-flight measurements were also performed by using an ion collector consisting of a collimated Faraday cup placed along the normal to the target surface. Surface profiles of the craters, created by the laser radiation absorption, permitted to study the ablation threshold and ablation yields of silicon in vacuum. The plasma fractional ionization, temperature and density were evaluated by the experimental data. A special regard is given to the ion acceleration process occurring inside the plasma due to the high electrical field generated at the non-equilibrium plasma conditions. The angular distribution of the neutral and ion species is discussed.     

Laser-produced plasma ion characteristics in laser ablation of lithium manganate

Laser ablation is widely used to assist in the fabrication of prototype lithium manganate (LiMn₂O₄) thin film structures for Li-ion battery electrodes via the pulsed laser deposition technique. However, films can be considerably Li and/or O deficient, depending the deposition conditions used. Here we present data on the ionic component of laser-produced plasma in laser ablation of lithium manganate with ns excimer laser. Plasma was monitored using an electrical Langmuir ion probe, in time-of-flight mode in conjunction with mass spectrometry to identify the dominant ionic species. Ablation in vacuum at ∼2.5 J cm⁻² revealed the plasma's ionic component was composed primarily of singly charged Li and Mn ions. The time-of-flight data indicates significant deceleration of the plasma when ablation is carried out in an oxygen background gas pressure of the order of 10 Pa. The implications for thin film growth are considered in terms of the possible gas phase interactions and/or thin film re-sputtering yield.     

Mechanical properties and the evolution of matrix molecules in PTFE upon irradiation with MeV alpha particles

The morphology, chemical composition, and mechanical properties in the surface region of α-irradiated polytetrafluoroethylene (PTFE) have been examined and compared to unirradiated specimens. Samples were irradiated with 5.5 MeV ⁴He²⁺ ions from a tandem accelerator to doses between 1 × 10⁶ and 5 × 10¹⁰ Rad. Static time-of-flight secondary ion mass spectrometry (ToF-SIMS), using a 20 keV C₆₀⁺ source, was employed to probe chemical changes as a function of α dose. Chemical images and high resolution spectra were collected and analyzed to reveal the effects of α particle radiation on the chemical structure. Residual gas analysis (RGA) was utilized to monitor the evolution of volatile species during vacuum irradiation of the samples. Scanning electron microscopy (SEM) was used to observe the morphological variation of samples with increasing α particle dose, and nanoindentation was engaged to determine the hardness and elastic modulus as a function of α dose.The data show that PTFE nominally retains its innate chemical structure and morphology at α doses <10⁹ Rad. At α doses ≥10⁹ Rad the polymer matrix experiences increased chemical degradation and morphological roughening which are accompanied by increased hardness and declining elasticity. At α doses >10¹⁰ Rad the polymer matrix suffers severe chemical degradation and material loss. Chemical degradation is observed in ToF-SIMS by detection of ions that are indicative of fragmentation, unsaturation, and functionalization of molecules in the PTFE matrix. The mass spectra also expose the subtle trends of crosslinking within the α-irradiated polymer matrix. ToF-SIMS images support the assertion that chemical degradation is the result of α particle irradiation and show morphological roughening of the sample with increased α dose. High resolution SEM images more clearly illustrate the morphological roughening and the mass loss that accompanies high doses of α particles. RGA confirms the supposition that the outcome of chemical degradation in the PTFE matrix with continuing irradiation is evolution of volatile species resulting in morphological roughening and mass loss. Finally, we reveal and discuss relationships between chemical structure and mechanical properties such as hardness and elastic modulus.     

Hydrogenation of carbon fragments after femtosecond laser ablation of solid C60

We have observed several kinds of hydrocarbon cations after the nanosecond and the femtosecond laser ablation (nsLA and fsLA) of solid C₆₀. The observation indicates that the carbon fragments produced just after laser ablation of the C₆₀ molecule react with the hydrogen atoms and ions coexisting in the ablation plume. In the case of fsLA, clear dependence of the product hydrocarbon species on the ablation laser power has been observed although the dependence is not clearly observed in nsLA. The production of C_nH₅⁺ (n = 8, 10, and 12) is only observed in fsLA suggesting the unique nature of the transient carbon fragments produced by fsLA.     

Cluster SIMS using metal cluster complex ions

Metal cluster complexes are chemically synthesized organometallic compounds, which have a wide range of chemical compositions with high molecular weight. Using a metal cluster complex ion source, sputtering characteristics of silicon bombarded with normally incident Ir₄(CO)₇⁺ ions were investigated. Experimental results showed that the sputtering yield at 10 keV was 36, which is higher than that with Ar⁺ ions by a factor of 24. In addition, secondary ion mass spectrometry (SIMS) of boron-delta-doped silicon samples and organic films of poly(methyl methacrylate) (PMMA) was performed. Compared with conventional O₂⁺ ion beams, Ir₄(CO)₇⁺ ion beams improved depth resolution by a factor of 2.5 at the same irradiation conditions; the highest depth resolution of 0.9 nm was obtained at 5 keV, 45° with oxygen flooding of 1.3 × 10⁻⁴ Pa. Furthermore, it was confirmed that Ir₄(CO)₇⁺ ion beams significantly enhanced secondary ion intensity in high-mass region.     

Investigation of FIB irradiation damage in La0.7Sr0.3MnO3 thin films

In this work we analyse systematically how morphological and magnetotransport properties of manganite thin films are affected by the damage induced by focused ion beam (FIB) irradiation. We irradiate different areas of the same sample with doses ranging from 5×10¹² to 3×10¹⁷ ions/cm² and we find that the film becomes swollen for doses up to 10¹⁶ ions/cm² and is eventually eroded by ion milling for further irradiation. On the other hand, transport properties are much more sensitive to FIB irradiation: the metal–insulator transition temperature is found to decrease monotonically with increasing doses up to 1.8×10¹³ ions/cm². At doses higher than 5.6×10¹³ ions/cm² the metallic state is completely suppressed and likely, also ferromagnetism.     

Argon laser induced changes to the carbonate content of enamel

Argon laser irradiation can be used to cure orthodontic brackets onto teeth in significantly less time than conventional curing lights. In addition, it has been shown that the argon laser seems to impart a demineralization resistance to the enamel. The purpose of this study was to use surface science techniques to ascertain if this demineralization resistance is possibly a result of a decrease in the carbonate content of enamel. Eleven mandibular third molars previously scheduled for extraction were collected and used in the present study. The teeth were sectioned in two and randomly assigned to either the argon laser (457-502 nm; 250 mW cm⁻²) or the control (no treatment) group. The sections assigned to the argon laser group were cured for 10 s and analyzed. To exaggerate any potential changes the experimental sections were then exposed to a further 110 s of argon laser irradiation. Surface analysis was performed using X-ray photoelectron spectroscopy (XPS) and time-of-flight secondary ion mass spectrometry (ToF-SIMS). The results showed no statistically significant change in the carbonate content of enamel after argon laser irradiation (p > 0.05). Thus, it is suggested that any demineralization resistance imparted to the enamel surface by argon laser irradiation is not due to alterations in carbonate content.     

Excitation of thermoluminescence in Eu doped Ba0.12Sr0.88SO4 nanophosphor by low energy argon ions

In the present paper thermoluminescence properties of argon ions irradiated barium strontium mixed sulphate phosphor are reported. The Ba_0.12Sr_0.88SO₄ phosphor was prepared by chemical co-precipitation method. The X-ray diffraction study of prepared sample suggests orthorhombic structure with average grain size of 37 nm. The samples were irradiated with 1.2 MeV Argon ions at fluences varying between 10¹¹-10¹⁵ ions/cm². The argon ions penetrate to the depth of 1.89 μm and lose their energy mainly via electronic stopping. Due to ion irradiation, a large number of defects in the sample are formed. Thermoluminescence (TL) glow curves were recorded for each of the ion fluence. These curves exhibit one broad peak with maximum intensity at 498 K composed of three overlapping peaks. This indicates that different sets of traps are being activated within the particular temperature range each with its own value of activation energy (E) and frequency factor (s). The peaks were observed due to formation of trap levels by ion irradiation and subsequently activation of traps on thermal stimulation. The TL response of the nanophosphor is linear in the dose range 59 kGy-590 MGy. Kinetic parameters associated with the prominent peaks were calculated using glow curve deconvolution (GCD) and verified by different glow curve shape and sample heating rate methods.