Experimental evidence of transmutation of Hg into Au under laser exposure of Hg nanodrops in D<Subscript>2</Subscript>O

Laser irradiation of suspensions of Hg nanodrops in D₂O induces partial transformation of Hg into Au. The Hg-Au conversion depends on the characteristics of the laser source used (Cu vapor, femtosecond Ti:sapphire, 90-ps Nd:YAG, 350-ps Nd:YAG) and on the initial Hg isotopic composition. For Hg of natural isotopic composition, the conversion gives the ¹⁹⁶Hg content close to initial (0.15%). Starting with ¹⁹⁶Hg-enriched (52%) Hg, the conversion yields 10 %. This transmutation is assigned to the generation of thermal neutrons during laser exposure of Hg nanodrops in D₂O. Possible mechanisms of neutron release are discussed.     

Initiation of nuclear reactions under laser irradiation of Au nanoparticles in the aqueous solution of Uranium salt

Laser exposure of a suspension of either gold or palladium nanoparticles in aqueous solutions of UO₂Cl₂ of natural isotope abundance was experimentally studied. Picosecond Nd:YAG lasers at peak power of 10¹¹–10¹³ W/cm² at the wavelength of 1.06–0.355 μm were used as well as a visible-range Cu vapor laser at a peak power of 10¹⁰ W/cm². The composition of colloidal solutions before and after laser exposure was analyzed using atomic absorption and gamma spectroscopy in the 0.06–1 MeV range of photon energy. Real-time gamma spectroscopy was used to characterize the kinetics of nuclear reactions during laser exposure. It was found that laser exposure initiated nuclear reactions involving both ²³⁸U and ²³⁵U nuclei via different channels in H₂O and D₂O. The influence of saturation of both the liquid and nanoparticles by gaseous H₂ and D₂ on the kinetics of nuclear transformations was found. Possible mechanisms of observed processes are discussed.     

Breeding of 233U in the thorium–uranium fuel cycle in VVER reactors using heavy water

A method is proposed for achieving optimal neutron kinetics and efficient isotope transmutation in the ²³³U–²³²Th oxide fuel of water-moderated reactors with variable water composition (D₂O, H₂O) that ensures breeding of the ²³³U and ²³⁵U isotopes. The method is comparatively simple to implement.     

Modeling of fast phase transitions dynamics in metal target irradiated by pico- and femtosecond pulsed laser

We investigate laser pulse influence on aluminum target in irradiance range 10⁹ to 10¹⁶ W/cm², pulse duration between 10⁻⁸ and 10⁻¹⁵ s, Gaussian time profile with wavelength of 0.8 μm. For all computations energy density was 10 J/cm². Plasma in the evaporated material is generated at the energy density above 10 J/cm²as the modeling showed.Long and short laser pulses distinguish by the mechanisms of energy transformation. For short laser pulses there is volumetric energy absorption, together with rapid phase transitions it lead to overheating in solid and liquid states, overheated solid temperature rises up to (6-8)T_m. Under influence of the energy saved in overheated solid, duration of the phase transitions becomes nanosecond, which is several orders of magnitude longer than laser pulse.     

高能电子与超强激光束作用产生的阿秒脉冲列

利用非线性汤姆孙散射的理论，从理论和数值模拟上研究了单电子在横向穿越高斯激光束束 腰时所辐射的x射线阿秒脉冲列的性质. 主要分析了电子以初始能量γ₀=1M eV—100M eV横向穿越激光振幅参数为a₀=1—10的高斯光束束腰获得的阿秒辐射脉冲的 时间 和空间性质. 计算表明，辐射呈现脉冲列的形式. 脉冲列的包络宽度取决于激光强度、束腰 的宽度以及入射电子能量. 电子的初始能量比激光强度对电子辐射脉冲的影响更大. 辐射脉 宽、脉冲间隔和脉冲包络宽度都正比于1/γ²₀，辐射功率正比于 γ⁶₀，辐射能 量正比于γ⁴₀. 当改变激光振幅a₀时，辐射功率正比 于a²₀、辐射包络中单 个脉冲脉宽正比于1/a₀、脉冲之间的间隔正比于a₀. 当保持激光强 度不变，而改变光束 束腰半径w₀时，辐射的脉冲数量、包络和辐射能量正比于w₀. 当 激光功率保 持不变时而改变激光强度和束腰半径时，脉冲包络宽度和最大辐射能量都基本不变. 当激光 振幅参数a₀=1，电子初始能量为10MeV时，激光束腰为两个激光波长时，电子 辐 射脉冲包络宽度只有14×10^-3τ₀（τ₀为入 射激光周期），达到几个阿秒的量级. 关键词： 阿秒脉冲 非线性汤姆孙散射 高斯激光光束     

Au原子高Rydberg态场致电离的实验研究

利用电热法将含金物质加热,产生Au原子束,再以两束UV脉冲激光垂直照射,将处于基态的Au原子共振激发至高Rydberg态。滞后于激光脉冲200ns的高压脉冲电场(6500V/cm)加到反应区,使处于Rydberg态的Au原子电离。激光波长在一定范围内扫描,共测出了Au原子的n²D_3/2(n=18—38)和n²S_1/2(n=21—34;36—38)两通道的38条能级的位置。用参数拟合得到²D_3/2和²S_1/2两系列的极限分别为:E_D=74409.8(3)cm^-1,E_S=74410.0(2)cm^-1,计算了每条能级的量子亏损。我们的实验还证明了场电离是一种十分有效的电离手段,比用通常的激光光电离效率要高得多。这在共振电离谱学(RIS)的研究中是一种很有效的方法。 关键词：     

Emission spectrum of hot HDO below 4000 cm

Fourier transform emission spectra were recorded using a mixture of H₂O and D₂O at a temperature of 1500 °C. The spectra were recorded in three overlapping sections and cover the wavenumber range 1800-3932 cm⁻¹. This spectrum is analyzed together with a previously reported one spanning the 380-2190 cm⁻¹ range [Parekunnel et al., J. Mol. Spectrosc. 2001 (28) 101]. This analysis leads to 4409 newly assigned HDO emission lines. This work particularly extends data on the (200) and (120) states of HDO for which newly determined energy levels are presented.     

Accelerated alpha decay under laser exposure of metallic nanoparticles in aqueous solutions of uranium salt

The recent experimental results on the acceleration of alpha decay under laser exposure of metallic nanoparticles in aqueous solutions (D₂O or H₂O) of uranium salt UO₂Cl₂ are reviewed. It is demonstrated that the rate of the alpha decay of uranium branching depends on the laser wavelength and laser peak power both under exposure of the solution of uranium salt in colloidal solutions of metallic nanoparticles and under laser ablation of a bulk target in an aqueous solution. Tuning the laser wavelength to the plasmon resonance allows observation of large deviations of the contents of radio-nuclides of ²³⁸U branching from their equilibrium values. The effect of laser exposure is characterized by high isotopic selectivity towards the decay of different nuclides. Possible mechanisms of the laser-induced alpha decay of uranium isotopes and their potential applications are discussed.     

XPS studies of short pulse laser interaction with copper

The effect of laser ablation on copper foil irradiated by a short 30 ns laser pulse was investigated by X-ray photoelectron spectroscopy. The laser fluence was varied from 8 to 16.5 J/cm² and the velocity of the laser beam from 10 to 100 mm/s. This range of laser fluence is characterized by a different intensity of laser ablation. The experiments were done in two kinds of ambient atmosphere: air and argon jet gas.The chemical state and composition of the irradiated copper surface were determined using the modified Auger parameter (α′) and O/Cu intensity ratio. The ablation atmosphere was found to influence the size and chemical state of the copper particles deposited from the vapor plume. During irradiation in air atmosphere the copper nanoparticles react with oxygen and water vapor from the air and are deposited in the form of a CuO and Cu(OH)₂ thin film. In argon atmosphere the processed copper surface is oxidized after exposure to air.     

Parametric study on femtosecond laser pulse ablation of Au films

Ablation process of 1 kHz rate femtosecond lasers (pulse duration 148 fs, wavelength 775 nm) with Au films on silica substrates has been systemically studied. The single-pulse threshold can be obtained directly. For the multiple pulses the ablation threshold varies with the number of pulses applied to the surface due to the incubation effect. From the plot of accumulated laser fluence N × ?_th(N) and the number of laser pulses N, incubation coefficient of Au film can be obtained (s = 0.765). As the pulse energy is increased, the single pulse ablation rate is increasing following two ablation logarithmic regimes, which can be explained by previous research.     

Superlong pulses of laser oscillation on the 6 1P1-5 1D2 transition of the barium atom

A possibility of CW laser oscillation on atomic transitions between a resonance energy level and a metastable one under conditions when lower laser states are deactivated by electron impacts has been theoretically shown. We determined the plasma parameters so that CW laser action on such transitions of Cu, Au, Ca and Ba atoms may be possible. Superlong laser pulses of 6 μs duration were obtained on the 6 ¹P₁-5 ¹D₂ transition of the barium atom.     

Combined analysis of the high sensitivity Fourier transform and ICLAS-VeCSEL absorption spectra of D2O between 8800 and 9520 cm

The absorption spectrum of dideuterated water, D₂O, has been recorded between 8800 and 9520 cm⁻¹ by intracavity laser absorption spectroscopy (ICLAS) based on a vertical external cavity system emitting laser (VeCSEL) and by high sensitivity Fourier Transform spectroscopy. The combined analysis of the spectra has allowed attributing 1223 transitions to the D₂O species. The spectrum assignment was performed on the basis of the recent results of variational calculations based on an optimized potential energy surface of D₂O. A set of 687 energy levels was derived from transitions assigned to eight upper vibrational states, 577 of them being reported for the first time. A detailed line list has been generated. The line intensities were retrieved mainly from the FTS spectrum and the absolute integrated intensities of the 2v₁ + v₂ + v₃ and the v₂ + 3v₃ bands dominating the spectrum have been determined.     

Effect of laser fluence on the size of copper oxide nanoparticles produced by the ablation of Cu target in double distilled water

Copper oxide nanoparticles produced in double distilled water at room temperature by laser ablation of the Cu target have been investigated using TEM, SEM, AFM, X-ray diffraction, photo-spectrometry and PIXE. Q-switched Nd:YAG laser operating at 1064 nm with a pulse duration of 5–6 ns was used to conduct the experiments in the fluence range of 5.73–9.87 J/cm². In each experiment, 12,000 laser pulses were used to ablate the target placed in double distilled water. Different diagnostic techniques reveal that the nanoparticles have a size between 2–55 nm and their mean size as well as the width of particle distribution increases with the laser fluence. Since no surface active material (surfactant) was added to water, the nanoparticles aggregated and settled down at the bottom of the container within a week. In addition to stable Cu₂O, the XRD spectrum also shows the presence of suboxide Cu₆₄O in the colloidal solution of nanoparticles produced in the present study.     

Laser-assisted shape selective fragmentation of nanoparticles

Experimental results are presented on laser-assisted fragmentation of gold-containing nanoparticles suspended in liquids (either ethanol or water). Two kinds of nanoparticles are considered: (i) elongated Au nanorods synthesized by laser ablation of a gold target immersed in liquid phase; (ii) gold-covered NiCo nanorods with high aspect ratio (θ ∼ 10) synthesized by wet chemistry processes. The shape selectivity induced by laser fragmentation of these nanorods is gained via tuning the wavelength of laser radiation into different parts of the spectrum of their plasmon resonance corresponding to different aspect ratios θ. Fragmentation is performed using three laser wavelengths, involving a Cu vapour laser (510 and 578 nm) and a Nd:YAG (1064 nm). Nanoparticles are characterized by UV-vis spectrometry, Transmission Electron Microscopy (TEM). The effect of laser pulse duration (nanosecond against picosecond range) is also studied in the case of fragmentation with an IR laser radiation.     

Morphology and composition on Al surface irradiated by femtosecond laser pulses

We study the surface chemicals and structures of aluminum plates irradiated by scanning femtosecond laser pulses in air for a wide range of laser fluence from 0.38 to 33.6 J/cm². X-ray photoelectron spectroscopy and X-ray diffraction analyses indicate clearly that crystalline anorthic Al(OH)₃ is formed under femtosecond laser pulse irradiation. Besides aluminum hydroxide, crystalline Al₂O₃ is also found in the samples irradiated at high laser fluence. Field emission scanning electron microscopy demonstrates that the surfaces of the samples irradiated with low laser fluence are colloidal-like and that nanoparticles with a few nanometers in size are embedded in glue-like substances. For high laser fluence irradiated samples, the surfaces are highly porous and covered by nanoparticles with uniform size of less than 20 nm.     

An injection-locked single-mode tea CO2 laser for SMM laser pumping

A D₂O laser has been developed for collective Thomson scattering measurements of ion temperature in high temperature plasmas. A pulse duration and a spectral width of a high power D₂O laser has been successfully controlled for this purpose, by using a TEA CO₂ laser injection-locked by an etalon-tuned TEA CO₂ laser as a pump source.     

Possibility of mechanically stimulated transmutation of carbon nuclei in ultradisperse deuterium-containing media

The variation of the concentration of ¹⁴C in graphite subjected to vibratory milling in the presence of heavy (or light) water is investigated using methods of radiocarbon β-spectral analysis. It is discovered that the C+D₂O system exhibits a statistically significant increase in the β counting rate in comparison to the C+H₂O system milled under similar conditions. A quantitative model of the transmutation of the ¹³C isotope into the ¹⁴C isotope involving an interaction of multiphonon excitations with deuterons in the graphite crystal lattice in the presence of background thermal neutrons is proposed. Zh. Tekh. Fiz. 67, 100–107 (June 1997)     

Laser induced synthesis of nanoparticles in liquids

The review of results on nanoparticles formation is presented under laser ablation of Ag, Au, and Cu-containing solid targets in liquid environments (H₂O, C₂H₅OH, C₂H₄Cl₂, etc.). X-ray diffractometry (XRD), UV-vis optical transmission spectrometry, and high resolution transmission electron microscopy (HRTEM) characterize the nanoparticles. The morphology of nanoparticles is studied as the function of both laser fluence and nature of the liquid. The possibility to control the shape of nanoparticles by ablation of an Au target by an interference pattern of two laser beams is demonstrated. Formation of alloyed Au-Ag and Ag-Cu nanoparticles is reported under laser exposure of a mixture of individual nanoparticles. The effect of internal segregation of brass nanoparticles is discussed due to their small lateral dimensions. The factors are discussed that determine the distribution function of particles size under laser ablation. The influence of laser parameters as well as the nature on the liquid on the properties of nanoparticles is elucidated.     

Enhancement of optical properties and donor-related emissions in Y-doped ZnO

The Zn_1−xY_xO nanoparticles with good optical properties have been prepared by sol–gel method. The yttrium doping effect on the structures and optical properties were investigated by XRD, SEM, XPS and low temperature photoluminescence. The UV emission intensity of yttrium doped ZnO was over 300 times stronger than that of pure ZnO, which was an exciting result in enhancing the ultraviolet near band edge emission in photoluminescence from ZnO nanoparticles. The UV emission band of doped ZnO nanoparticles exhibits a red shift from 388 to 398 nm, indicating a shallow energy level near valence band has been formed due to the yttrium doping into ZnO lattices. The defect-related band is suppressed (I_D/I_UV = 1–0.83) considerably in Zn_1−xY_xO nanoparticles, revealing the quenching of the broad yellow-orange emission. The doping effect on the optical properties is investigated by temperature dependent photoluminescence. The experimental results indicated that the donor level of yttrium is deeper than that of undoped ZnO.     

Improved color purity in nano-size Eu-doped YBO3 red phosphor

Nano-size YBO₃:Eu³⁺ phosphor has been synthesized by the co-precipitation method. X-ray diffraction (XRD) pattern confirmed the formation of hexagonal vaterite-type structures of YBO₃:Eu³⁺ nanoparticles. The transmission electron microscopy (TEM) study revealed the formation of spherical YBO₃:Eu³⁺ nanoparticles with size 20-40 nm. The photoluminescence spectra revealed that the ratio of the red emission (⁵D₀-⁷F₂) to the orange emission (⁵D₀-⁷F₁) was much higher in the synthesized nano-size YBO₃:Eu³⁺ phosphor. The improved relative intensity, i.e., higher R/O value of emission peaks, is due to a lower symmetry of crystal field around Eu³⁺ ions.