Features of laser radiation interaction with metals having cryogenic temperature

In this paper we determine the features of the thermophysical processes involved in the interaction of laser radiation with metals that have cryogenic temperature. To do so, we use a one-dimensional model that involves heating a semi-infinite solid by a point thermal source with a constant flux density. Temperature fields, heating and cooling rates in the laser-irradiated zone for iron and titanium at the ambient temperatures of 77 (liquid nitrogen), 293 and 573 K were calculated. The intensity of the laser irradiation enabled the melting temperatures of 1933 K and 1812 K on the Ti and Fe surface, respectively, to be reached. The duration of the laser pulse was 4.5 ms. We show that a drop in ambient temperature from 573 to 77 K leads to a rise in cooling rate from 3.25 × 10³ and 6.4 × 10⁶ K/s to 4.25 × 10³ and 1.3 × 10⁷ K/s in the Ti and Fe targets, respectively. Agreement was good between the calculated depths of melting and phase transformation isotherms and the experimental depths of the interfaces of melting and heat-affected zones.     

Excimer laser surface treatment of aluminum alloy in nitrogen

The excimer laser nitriding process reported is developed to enhance the mechanical and chemical properties of aluminum alloys. An excimer laser beam is focused onto the alloy surface in a cell containing 1-bar nitrogen gas. A vapor plasma expands from the surface and a shock wave dissociates and ionizes nitrogen. It is assumed that nitrogen from plasma in contact with the surface penetrates to some depth. Thus it is necessary to work with a sufficient laser fluence to create the plasma, but this fluence must be limited to prevent laser-induced surface roughness. The nitrogen-concentration profiles are determined from Rutherford backscattering spectroscopy and scanning electron microscopy coupled to energy-dispersive X-ray analysis. Crystalline quality is evidenced by an X-ray diffraction technique. Transmission electron microscopy gives the in-depth microstructure. Fretting coefficient measurements exhibit a lowering for some experimental conditions. The polycrystalline nitride layer obtained is several micrometers thick and composed of a pure AlN (columnar microstructure) top layer (200–500 nm thick) standing on an AlN (grains) in alloy diffusion layer. From the heat conduction equation calculation it is shown that a 308-nm laser wavelength would be better to increase the nitride thickness, as it corresponds to a weaker reflectance R value for aluminum. Received: 17 October 2000 / Accepted: 19 October 2000 / Published online: 23 May 2001     

Effect of experimental conditions on surface hardness measurements of calcified tissues via LIBS

This paper reports on the effects of LIBS experimental conditions on the measurement of the surface hardness of calcified tissues. The technique mainly depends on a previously demonstrated correlation between the intensity ratio of ionic to atomic spectral lines and the hardness of the target material. Three types of calcified tissues have been examined, namely enamel of human teeth, shells, and eggshells. Laser-induced breakdown spectra were obtained under two different experimental conditions. In the first nano and picoseconds, laser pulses were used in a single-pulse arrangement, while in the second, single- and double-pulse regimes with nanosecond laser excitation were utilized. The results show that the ionic to atomic spectral line intensity ratios are higher in the case of picosecond laser pulse for both Ca and Mg spectral lines. This effect has been justified in view of the repulsive force of the laser-induced shock waves which depends clearly on the target surface hardness and on the laser irradiance. The electron densities ratio (pico/nano) is shown to be strongly depending on the laser irradiance too. In the case of calcium, single-pulse ratios are higher than the double-pulse ratios, while there is no appreciable difference between both in the case of magnesium. The results obtained herein suggest that double-pulse nanosecond arrangement and the choice of a minor element such as Mg furnishes the best experimental conditions for estimating the surface hardness via LIBS spectra. To validate this method, it has been applied on two previously measured groups of teeth enamel, the first is of ancient Egyptians, and the second from Nubians and Ugandans. The results support the usefulness of this method for similar real-life applications.     

Synthesis and structure of aluminum substituted MoSi2

Mo(Si_1−xAl_x)₂ compositions have been prepared by a modified SHS route under pressure. The compositional phase analysis indicates a body centered tetragonal C11_b phase below x<0.05 substitution, above which a biphasic region of C11_b and C40 structure coexists. Occurrence of pure hexagonal C40 phase is observed for x>0.1. The aluminum substitution leads to a continuous increase in the lattice parameters in both these structures. In the biphasic region, redistribution of aluminum concentration takes place with the evolution of aluminum rich C40 phase as indicated by energy dispersive X-ray analysis and supported by micro-hardness measurements.     

Study of the effect of annealing on defects in Fe-Mn-Si-Cr-Ni-C alloy by slow positron beam

FeMnSi shape memory alloys (SMAs) have received much attention as one-way SMAs due to their cost-effectiveness. Variable-energy (0-30 keV) positron beam studies have been carried out on a Fe-Mn-Si-Cr-Ni-C alloy with different degrees of deformation. Doppler broadening profiles of the positron annihilation as a function of incident positron energy were shown to be quite sensitive to defects introduced by deformation. The variation of the nature and the concentration of defects are studied as a function of isochronal annealing temperature. These results are correlated with the data measured with the positron annihilation lifetime spectroscopy (PALS). The positron annihilation results are compared to XRD and optical microscopy (OM).     

Vaporization and Plasma Shielding during High Power Nanosecond Laser Ablation of Silicon and Nickel

A thermal model to describe the high-power nanosecond pulsed laser ablation is presented. It involves the vaporization and the following plasma shielding effect on the whole ablation process. As an example of Si target, we obtainthe time evolution of the calculated surface temperature, ablation rate and ablation depth. It can be seen that plasma shielding plays a more important role in the ablation process with time. At the same time, the ablation depth with laser fluence based on different models is shown. Moreover, we simulate the pulsed laser irradiation Ni target. The evolution of the transmitted intensity and the variation of ablation depth per pulse with laser fluence are performed. Under the same experimental conditions, the numerical results calculated with our thermal model are more in agreement with the experimental data.     

Plasticity and ab initio characterizations on Fe4N produced on the surface of nanocrystallized 18Ni-maraging steel plasma nitrided at lower temperature

18Ni-maraging steel has been entirely nanocrystallized by a series of processes including solution treatment, hot-rolling deformation, cold-drawn deformation and direct electric heating. The plasma nitriding of nanocrystallized 18Ni-maraging steel was carried out at 410 °C for 3 h and 6 h in a mixture gas of 20% N₂ + 80% H₂ with a pressure of 400 Pa. The surface phase constructions and nitrogen concentration profile in surface layer were analyzed using an X-ray diffractometer (XRD) and the glow discharge spectrometry (GDS), respectively. The results show that an about 2 μm thick compound layer (mono-phase γ′-Fe₄N) can be produced on the top of the surface layer of nanocrystallized 18Ni-maraging steel plasma nitrided at 410 °C for 6 h. The measured hardness value of the nitrided surface is 11.6 GPa. More importantly, the γ′-Fe₄N phase has better plasticity, i.e., its plastic deformation energy calculated from the load-displacement curve obtained by nano-indentation tester is close to that of nanocrystallized 18Ni-maraging steel. Additionally, the mechanical properties of γ′-Fe₄N phase were also characterized by first-principles calculations. The calculated results indicate that the hardness value and the ratio of bulk to shear modulus (B/G) of the γ′-Fe₄N phase are 10.15 GPa and 3.12 (>1.75), respectively. This demonstrates that the γ′-Fe₄N phase has higher hardness and better ductility.     

Influence of water cavitation peening with aeration on fatigue behaviour of SAE1045 steel

Water cavitation peening (WCP) with aeration is a recent potential method in the surface enhancement techniques. In this method, a ventilation nozzle is adopted to improve the process capability of WCP by increasing the impact pressure, which is induced by the bubble collapse on the surface of components in the similar way as conventional shot peening. In this paper, fatigue tests were conducted on the both-edge-notched flat tensile specimens to assess the influences of WCP on fatigue behaviour of SAE1045 steel. The notched specimens were treated by WCP, and the compressive residual stress distributions in the superficial layer were measured by X-ray diffraction method. The tension-tension (R = S_min/S_max = 0.1, f = 10 Hz) fatigue tests and the fracture surfaces observation by scan electron microscopy (SEM) were conducted. The experimental results show that WCP can improve the fatigue life by inducing the residual compressive stress in the superficial layer of mechanical components.     

Hot-electron-induced plasma formation on the rear surface of a foil

The plasma jet formed on the rear surface of a foil in laser–solid interaction is investigated by laser probing. The rear plasma jet, which is in line with the laser, formed a few picoseconds after the incidence of the focused laser, is due to a beam of fast electrons propagating through the target and is collimated by a strong magnetic field in the plasma. Received: 14 January 2003 / Revised version: 2 April 2003 / Published online: 2 June 2003 RID="*" ID="*"Corresponding author. Fax: +86-10/8264-9531 E-mail: jzhang@aphy.iphy.ac.cn     

Design of Highly Directive Ni-Like Ag X-Ray Laser at 13.9nm

We theoretically investigate a 13.9nm Ni-like Ag x-ray laser using a one-dimensional hydrodynamic code coupled with an atomic physics data package. The population inversion is transiently pumped by a grazing incident 0.5ps main pulse irradiating into an optimized plasma, which is generated by a normal incidence 300ps pulse and a subsequent grazing incidence 300ps pulse. The effect of the grazing-incidence angle on the source position of the output x-ray laser is investigated. Near zero deflecting angle is found for the peak output intensity of the Ni-like Ag x-ray lasers, with a small FWHM divergence of 5mrad. It is predicted that saturation can be achieved with a total pump energy of 165mJ.     

Influence of strong laser fields on the inverse bremsstrahlung collision frequency

A new model is described for the absorption of laser light by a plasma. Two issues important for high laser intensity are considered: changes in the electron velocity distribution and the absorption non-linearity. The effects of anisotropy and non-Maxwellian distribution function are analysed with a hard sphere model. It is shown that anisotropy alters the electron-ion collision frequency by an amount which depends on the ratio of the temperatures in direction of and perpendicular to the laser field.The effect of high laser intensity is considered assuming Coulomb collisions, and a new expression obtained for the collision frequency as a function of quiver velocity. It will be shown that the result is in agreement with the Spitzer result in the case of small fields and with the result of Catto and Speziale in the case of very strong fields, but shows an unexpected maximum of the collision frequency in an intermediate regime.     

Effect of Cluster Coulomb Fields on Electron Acceleration in Laser-Cluster Interaction

Single particle simulations are used to investigate electron acceleration in the laser-cluster interaction, taking into account the Coulomb fields around individual clusters. These Coulomb fields are induced from the cluster cores with positive charge when electrons escape from the cluster cores through ponderomotive push from the laser field. These Coulomb fields enable some stripped electrons to be stochastically in phases with the laser fields so that they can gain net energy from the laser efficiently. In this heating mechanism, circularly polarized lasers, larger cluster size and higher cluster densities make the acceleration more efficient.     

Mechanical properties of sol-gel derived lead zirconate titanate thin films by nanoindentation

Lead zirconate titanate (PZT) thin films are deposited on platinized silicon substrate by sol-gel process. The crystal structure and surface morphology of PZT thin films are characterized by X-ray diffraction and atomic force microscopy. Depth-sensing nanoindentation system is used to measure mechanical characteristics of PZT thin films. X-ray diffraction analyses confirm the single-phase perovskite structures of all PZT thin films. Nanoindentation measurements reveal that the indentation modulus and hardness of PZT thin films are related with the grain size and crystalline orientation. The increases of the indentation modulus and hardness with grain size are observed, indicating the reverse Hall-Petch effect. Furthermore, the indentation modulus of (1 1 1)-oriented PZT thin film is higher than those of (1 0 0)- and random-oriented films. The consistency between experimental data and numerical results of the effective indentation moduli for fiber-textured PZT thin films using Voigt-Reuss-Hill model is obtained.     

Strength of magnesium oxide under high pressure: evidence for the grain-size dependence

X-ray diffraction patterns from magnesium oxide compressed in a diamond anvil cell up to 55 GPa have been recorded and the differential stress (a measure of compressive strength) and grain-size (crystallite size) determined as a function of pressure from the line-width analysis. The strength agrees well with the uniaxial stress component (another measure of compressive strength) derived earlier from the line-shift data. The strength increases while the crystallite size decreases steeply as the pressure is raised from ambient to ∼10 GPa. The increase in strength is much smaller at higher pressures. The strength-pressure data are explained by combining the grain-size dependence of strength and the shear-modulus scaling law. The dependence of strength on grain-size has not been considered in the past in the discussion of high-pressure strength data.     

Detailed Characteristics of Expansion Velocity of Si from Laser Ablated SiC

Optical emission of plasma is used to investigate the characteristics of dynamics distribution in the plume gen- erated by ablation of a SiC sample using Nd：YAG laser. The plume expansion dynamics is characterized by time-of-flight measurement. We find that the profiles of Si （I） （390.55 nm） split into two components and the Si （1I） （634. 71 nm） spectra show two distinct expansion dynamics regions. The time-of-flight measurement of Si（ll） （634. 71 nm） under different laser irradianee conditions, from 0.236 G W/cm^2 to 1.667 G W/cm^2, are presented and discussed.     

Anisotropic emission in laser-produced aluminum plasma in ambient nitrogen

We report on the dynamical expansion of pulsed laser ablation of aluminum in ambient pressure of nitrogen using images of the expanding plasma. The plasma follows shock model at pressures of 0.1 Torr and drag model at 70 Torr, respectively, with incident laser energy of 265 mJ. The plasma expansion shows unstable boundaries at 70 Torr and is attributed to Rayleigh-Taylor instability. The growth time of Rayleigh-Taylor instability is estimated between 0.09 and 4 μs when the pressure is varied from 1 to 70 Torr. The pressure gradients at the plasma-gas interface gives rise to self-generated magnetic field and is estimated to be 26 kG at 1 Torr ambient pressure using the image of the expanding plasma near the focal spot. The varying degree of polarization of Al III transition 4s ²S_1/2-4p ²P°_3/2 at 569.6 nm gives rise to anisotropic emission and is attributed to the self-generated magnetic field that results in the splitting of the energy levels and subsequent recombination of plasma leading to the population imbalance.     

Isothermal decomposition behavior of the high nitrogen concentration γ-Fe[N] prepared from pure iron

The isothermal decomposition characteristic of the homogeneous high nitrogen austenitic samples prepared by a new multi-stage nitriding process was investigated by SEM and TEM in this paper. Lamellar-structure precipitations arranged on the decomposed austenite grain boundaries (GBs) and the flaky γ′ particles and network-structure precipitations appeared inside of the γ matrix. The extra high Vickers hardness more than 800 HV was found in the 5-h aged samples, which was different from those of the bainitic/martensitic structures in Fe-C alloys. The SAED analysis indicates the γ′ has the coherent relation with the parent γ-Fe[N] phase and the interstitial nitrogen atoms are inclined to aggregate on {1 1 0}γ′/γ planes, which also contributes to the hardness of the matrix.     

Investigation of the interaction of subpicosecond KrF laser pulses with a preformed carbon plasma

The interaction of a subpicosecond KrF laser pulse with a preformed carbon plasma of various scale lengths is investigated. Two different interaction geometries are chosen. In the first one the propagation vector of the short pulse has a component along the density gradient of the preformed plasma (angle of incidence is 45°). In the second geometry the propagation direction of the short pulse is perpendicular to the density gradient of the preplasma (angle of incidence is 90°). The emitted soft X-ray spectrum in the wavelength interval from 10 to 700 is observed while changing several parameters of the experiment. It is found that the emission in the short wavelength part under 200 results from the radiation of ions created by collisional heating near the critical density region. The long wavelength part above 200 , enhanced up to a maximal factor of 20, is mainly produced by radiating particles field—ionized up to the He-like carbon state in the high-intensity laser field. The short wavelength part is missing in the case of 90° angle of incidence because there is no interaction with the critical layer that results in an insufficient collisional heating.     

Study of the surface structure of Si(1 1 1)-6 × 1(3 × 1)-Ag using X-ray crystal truncation rod scattering

The structure of the Si(1 1 1)-6 × 1-Ag surface is investigated using crystal truncation rod (CTR) scattering along 00 rod. For the measurement, we developed a manipulator suitable for observing CTR scattering at large momentum transfer perpendicular to the surface. The heights of the silver and reconstructed silicon atoms from the substrate were determined. We also compared the obtained positions with those of the Si(1 1 1)-√3 × √3-Ag surface and found that the heights of those reconstructed atoms are almost the same.     

The application of the single-channel random phase approximation to radiative properties of dense He and Li plasmas

We performed single-channel, single-component random phase approximation calculations for dense He and Li plasmas for an electron temperature of . Results are presented for excitation energies and oscillator strengths for the (1,2)s−np(n=2−5) transitions using both the ion-sphere and ion-correlation (IC) models. Our results indicate that ion correlations are not a significant effect for these systems and conditions.