Preparation and characterization of Fe-doped TiO2 on fly ash cenospheres for photocatalytic application

Fe³⁺-doped TiO₂ film deposited on fly ash cenosphere (Fe-TiO₂/FAC) was successfully synthesized by the sol-gel method. These fresh photocatalysts were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and thermogravimetric analyses (TGA). The XRD results showed that Fe element can maintain metastable anatase phase of TiO₂, and effect of temperature showed rutile phase appears in 650 °C for 0.01% Fe-TiO₂/FAC. The SEM analysis revealed the Fe-TiO₂ films on the surface of a fly ash cenosphere with a thickness of 2 μm. The absorption threshold of Fe-TiO₂/FACs shifted to a longer wavelength compared to the photocatalyst without Fe³⁺-doping in the UV-vis absorption spectra. The photocatalytic activity and kinetics of Fe-TiO₂/FAC with varying the iron content and the calcination temperatures were investigated by measuring the photodegradation of methyl blue (MB) during visible light irradiation. Compared with TiO₂/FAC and Fe³⁺-doped TiO₂ powder (Fe-TiO₂), the degradation ratio using Fe-TiO₂/FAC increased by 33% and 30%, respectively, and the best calcined temperature was 450 °C and the optimum doping of Fe/Ti molar ratio was 0.01%. The Fe-TiO₂/FAC particles can float in water due to the low density of FAC in favor of phase separation to recover these photocatalyst after the reaction, and the recovery test shows that calcination contributes to regaining photocatalytic activity of Fe-TiO₂/FAC photocatalyst.     

Synthesis and characteristics of natural zeolite supported Fe-TiO2 photocatalysts

Natural zeolite supported Fe³⁺-TiO₂ photocatalysts were synthesized for the sake of improving the recovery and photocatalytic efficiency of TiO₂. The as-prepared materials were characterized by X-ray diffraction (XRD), fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), ultraviolet-visible diffuse reflection spectroscopy (UV-vis DRS), scanning electron microscopy (SEM) and energy-dispersive X-ray analysis (EDX). Methyl orange was used to estimate the photocatalytic activity of the samples. The results showed that zeolite inhibited the growth of TiO₂ crystallite sizes. The Fe³⁺ concentration played an important role on the microstructure and photocatalytic activity of the samples. The iron ions could diffuse into TiO₂ lattice to the form Fe-O-Ti bond and gave TiO₂ the capacity to absorb light at lower energy levels. The photocatalytic activity of the samples could be enhanced as appropriate dosages of Fe³⁺ were doped.     

Influences of the iron ion (Fe)-doping on structural and optical properties of nanocrystalline TiO2 thin films prepared by sol-gel spin coating

Titanium dioxide (TiO₂) thin films doping of various iron ion (Fe³⁺) concentrations were deposited on silicon (Si) (100) and quartz substrates by sol-gel Spin Coating technique followed by a thermal treatment at 600 °C. The structure, surface morphology and optical properties, as a function of the doping, have been studied by X-ray diffractometer (XRD), Raman, ultraviolet-visible (UV-vis) and Spectroscopic Ellipsometry (SE). XRD and Raman analyzes of our thin films show that the crystalline phase of TiO₂ thin films comprised only the anatase TiO₂, but the crystallinity decreased when the Fe³⁺ content increased from 0% to 20%. During the Fe³⁺ addition to 20%, the phase of TiO₂ thin film still maintained the amorphous state. The grain size calculated from XRD patterns varies from 29.3 to 22.6 nm. The complex index and the optical band gap (E_g) of the films were determined by the spectroscopic ellipsometry analysis. We have found that the optical band gap decreased with an increasing Fe³⁺ content.     

Photosensitization of nanocrystalline TiO2 film electrode with cadmium sulphoselenide

Nanocrystalline titanium dioxide (TiO₂) thin films composed of densely packed nanometer-sized grains have been successfully deposited onto an indium-doped-tin oxide (ITO) substrate. Then cadmium sulphoselenide (CdSSe) thin film was deposited onto pre-deposited TiO₂ to form a TiO₂/CdSSe film, at low temperature using a simple and inexpensive chemical method. The X-ray diffraction, selected area electron diffraction, scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX) and water contact angle techniques were used for film characterization. Purely rutile phase of TiO₂ with super-hydrophilic and densely packed nanometer-sized spherical grains of approximate diameter 30-40 (±2) nm was observed. The increase in optical absorption was observed after CdSSe film deposition. Nest like surface morphology of CdSSe on TiO₂ surface results in air trapping in the crevices which prevents water from adhering to the film with increase in water contact angle. Photosensitization of TiO₂ with CdSSe was confirmed with light illumination intensity of 80 mW/cm².     

Mechanism of enhanced photocatalysis of TiO2 by Fe in suspensions

In this work, the mechanism of enhanced photocatalysis of TiO₂ with Fe³⁺ was studied using Sulfadiazine (SD) as the model compound. Results indicated that degradation rate of SD was enhanced by the addition of Fe³⁺ in TiO₂ suspension. The crystalline structure of TiO₂ particles was stable in suspensions. The hydroxyl radical generated by TiO₂/Fe³⁺ (both TiO₂ and Fe³⁺) photocatalysis was in a higher yield. Moreover, Fe²⁺ was found not to give an obvious impact on the SD degradation in TiO₂ suspension, whereas Fe³⁺ had a notable effect. The adsorption amount of TiO₂ was greatly enhanced by the addition of Fe³⁺ in suspensions. Finally, an interaction model of SD degradation in TiO₂ suspension containing Fe³⁺ was also proposed by investigating of surface behaviors of TiO₂ particles. It will be beneficial to use Fe³⁺ as the electron acceptors on the surface of TiO₂ particles, which helps to improve the yield of hydroxyl radical.     

The effect of PVA (Bi2O3-doped) interfacial layer and series resistance on electrical characteristics of Au/n-Si (110) Schottky barrier diodes (SBDs)

Two types of Schottky Barrier Diodes (SBDs) with and without PVA (Bi₂O₃-doped) polymeric interfacial layer, were fabricated and measured at room temperature in order to investigate the effects of the PVA (Bi₂O₃-doped) interfacial layer on the main electrical parameters such as the ideality factor (n), zero-bias barrier height (Φ_B0), series resistance (R_s) and interface-state density (N_ss). Electrical parameters of these two diodes were calculated from the current-voltage (I-V) characteristics and compared with each other. The values of Φ_B0, n and R_s for SBDs without polymeric interfacial layer are 0.71 eV, 1.44 and 4775 Ω, respectively. The values of Φ_B0, n and R_s for SBDs with PVA (Bi₂O₃-doped) polymeric interfacial layer are 0.74 eV, 3.49 and 10,030 Ω, respectively. For two SBDs, the energy density distribution profiles of interface states (N_ss) were obtained from forward-bias I-V measurements by taking the bias dependence of R_s of these devices into account. The values of N_ss obtained for the SBD with PVA (Bi₂O₃-doped) polymeric interfacial layer are smaller than those of the SBD without polymeric interfacial layer.     

Fabrication, characterization and photoelectrochemical properties of Fe2O3 modified TiO2 nanotube arrays

TiO₂ nanotube (NT) arrays modified by Fe₂O₃ with high sensibility in the visible spectrum were first prepared by annealing anodic titania NTs pre-loaded with Fe(OH)₃ which was uniformly clung to the titania NTs using sequential chemical bath deposition (S-CBD). The photoelectrochemical performances of the as-prepared composite nanotubes were determined by measuring the photo-generated currents and voltages under illumination of UV-vis light. The titania NTs modified by Fe₂O₃ showed higher photopotential and photocurrent values than those of unmodified titania NTs. The enhanced photoelectrochemical behaviors can be attributed to the modified Fe₂O₃ which increases the probability of charge-carrier separation and extends the range of the TiO₂ photoresponse from ultraviolet (UV) to visible region due to the low band gap of 2.2 eV of Fe₂O₃.     

Iron ions in ZSM-5 zeolite: Fe3+ in framework, Fe2+ in extra-framework positions in catalytic N2O decomposition

Fe-ZSM-5 samples containing a combination of ⁵⁷Fe³⁺ in framework (FW) and regular iron in extra-framework (EFW) sites were prepared by introducing ⁵⁷Fe in hydrothermal synthesis, then exchanging Fe²⁺ of natural isotope composition into the lattice. The stability for one part of Fe²⁺ and Fe²⁺ ? Fe³⁺ reversibility for the other part in catalytic decomposition of N₂O is demonstrated by in situ Mössbaer measurements. Formation of dinuclear Fe_FW–O–Fe_EFW pairs is not prevailing.     

Temperature dependence characterization of metal-insulator-nonuniformly-doped semiconductor solar cell

Four layered metal-insulator-pp⁺ semiconductor MIS solar cell device was simulated using a comprehensive numerical model. The semiconductor layer was assumed to be nonuniformly-doped in which additional drift electric field inside the semiconductor could be generated. The effects of the electrostatic and kinetic properties of the electronic states at the insulator-semiconductor interface were taken into account. The influences of the operating temperature on the device performance were studied in detail.     

Er3+掺杂SiO2复合的Al2O3粉末结构及光致发光特性

采用溶胶-凝胶(sol-gel)工艺制备0.1 mol% Er³⁺掺杂Al₂O₃体系和SiO₂-Al₂O₃复合体系粉末. 实验结果表明：5 mol%的SiO₂复合加入Al₂O₃抑制γ→θ和θ→α相转变. 掺0.1 mol%Er³⁺:Al₂O₃体系粉末，900℃烧结，在1.47—1.63μm波段内光致发光(PL)谱为中心波长1.53 μm、半高宽56 nm的单一宽峰，1000—1200℃烧结，劈裂为多峰PL谱. 掺0.1 mol%Er³⁺:SiO₂-Al₂O₃复合体系粉末，在高达1200℃烧结，仍保持中心波长1.53 μm的单一宽峰PL谱，由于—OH更完全的脱除，PL强度较900℃烧结Al₂O₃体系，SiO₂-Al₂O₃复合体系均提高1个数量级. 关键词： 2-Al₂O₃复合体系')" href="#">SiO₂-Al₂O₃复合体系 掺铒 溶胶-凝胶工艺 光致发光     

Theory studies of the local lattice distortions and the EPR parameters for Cu2+, Mn2+ and Fe3+ centres in ZnWO4

The local lattice distortions and the electron paramagnetic resonance (EPR) parameters (g factors, hyperfine structure constants and zero-field splittings) for Cu²⁺, Mn²⁺ and Fe³⁺ in ZnWO₄ are theoretically studied based on the perturbation calculations for rhombically elongated octahedral 3d⁹ and 3d⁵ complexes. The impurity centres on Zn²⁺ sites undergo the local elongations of 0.01, 0.002 and 0.013 Å along the C₂ axis and the planar bond angle variations of 8.1°, 8.0° and 8.6° for Cu²⁺, Mn²⁺ and Fe³⁺, respectively, due to the Jahn–Teller effect and size and charge mismatch. In contrast to the host Zn²⁺ site with obvious axial elongation (～0.31 Å) and perpendicular (angular) rhombic distortion, all the impurity centres demonstrate more regular octahedral due to the above local lattice distortions. The copper centre exhibits significant Jahn–Teller reductions for the spin-orbit coupling and orbital angular momentum interactions, characterised by the Jahn–Teller reduction factor J (≈0.29 ? 1). The calculated EPR parameters agree well with the experimental results. The local structures of the impurity centres are analysed in view of the corresponding lattice distortions.     

Synthesis, structure and optical properties of Eu/TiO2 nanocrystals at room temperature

The nanocrystal samples of titanium dioxide doped with europium ion (Eu³⁺/TiO₂ nanocrystal) are synthesized by the sol-gel method with hydrothermal treatment. The Eu³⁺ contents (molar ratio) in the samples are 0, 0.5%, 1%, 2%, 3% and 4%. The X-ray diffraction, UV-Vis spectroscopy data and scanning electron microscope image show that crystallite size is reduced by the doping of Eu³⁺ into TiO₂. Comparing the Raman spectra of TiO₂ with Eu³⁺/TiO₂ (molar ratio Eu³⁺/TiO₂=1%, 2% and 4%) nanocrystals at different annealing temperatures indicates that the anatase-to-rutile phase transformation temperatures of Eu³⁺/TiO₂ nanocrystals are higher than that of TiO₂. This is due to the formation of Eu-O-Ti bonds on the surface of the TiO₂ crystallite, as characterized by the X-ray photoelectron spectroscopy. The photoluminescence spectra of TiO₂ in Eu³⁺/TiO₂ nanocrystals are interpreted by the surface self-trapped and defect-trapped exciton relaxation. The photoluminescence of Eu³⁺ in Eu³⁺/TiO₂ nanocrystals has the strongest emission intensity at 2% of Eu³⁺ concentration.     

Synthesis and photoluminescence properties of Sm-doped CaWO4 nanoparticles

The Sm³⁺-doped CaWO₄ nanoparticles were synthesized by hydrothermal method. The room temperature photoluminescence (PL) spectra of Sm³⁺-doped CaWO₄ nanoparticles doped with different Sm³⁺ concentrations under 405 nm excitation have been investigated. The PL spectra showed four strong emission peaks at 460, 571, 609, and 653 nm. The first emission peak at 460 nm could be due to a structural defect of the lattice, an oxygen-deficient WO₃ complex. The other three emissions at 571, 609, and 653 nm were due to the f-f forbidden transitions of the 4f electrons of Sm³⁺, corresponding to ⁴G_5/2→⁶H_5/2 (571 nm), ⁶H_7/2 (609 nm), and ⁶H_9/2 (653 nm), respectively. In addition, the optimum Sm³⁺ concentration in CaWO₄ nanoparticles for optical emission was determined to be 1.0%. The Sm³⁺⁴G_5/2→⁶H_7/2 (609 nm) emission intensity of Sm³⁺-doped CaWO₄ nanoparticles significantly increased with the increase of Sm³⁺ concentration, and showed a maximum when Sm³⁺ doping content was 1.0%. If Sm³⁺ concentration continued to increase, namely more than 1.0%, the Sm³⁺⁴G_5/2→⁶H_7/2 emission intensity would decrease. The present materials might be a promising phosphor for white-light LED applications.     

Stabilization of the anatase phase in TiO2(Fe, PEG) nanostructured coatings

Multilayered TiO₂(Fe³⁺, PEG) films were deposited on glass and SiO₂/glass substrates by sol-gel dipping method. The influence of Fe³⁺ and PEG(polyethylene glycol) concentrations, the number of layers, the thermal treatment time and the temperature on the optical and microstructural properties of the TiO₂ films were studied.As-deposited TiO₂(Fe³⁺, PEG) films were very porous, but after the thermal treatment at 500 °C, the PEG decomposed and burned out to porosity decreasing. Homogeneous nanostructured films were obtained, where the amorphous and the anatase phases coexist. XRD analysis showed that no rutile phase is observed in the films deposited on SiO₂/glass as compared with those deposited directly on glass and that the presence of the anatase phase in the films without PEG is more evident in the three-layers film. The XRD intensity of the main peak of anatase from 25° decreases with the increase of PEG concentration.The optical gap of the TiO₂(Fe³⁺, PEG) films is found in 2.52-2.56 eV range and does not essentially depend on the PEG content.     

Photoluminescence characterization of Ce and Dy doped Li2CaGeO4 phosphors

Ce³⁺ and Dy³⁺ activated Li₂CaGeO₄ phosphors were prepared by a solid-state reaction method, and characterized by XRD (X-ray diffraction) and photoluminescence techniques. The characteristic emission bands of Dy³⁺ due to ⁴F_9/2→⁶H_15/2 (blue) and ⁴F_9/2→⁶H_13/2 (yellow) transitions were detected in the emission spectra of Li₂CaGeO₄:Dy³⁺. Ce³⁺ broad band emission was observed in Li₂CaGeO₄:Ce³⁺ phosphors at 372 and 400 nm due to 5d→4f transition when excited at 353 nm. Co-doping of Ce³⁺ enhanced the luminescence of Dy³⁺ significantly and concentration quenching occurs when Dy³⁺ is beyond 0.04 mol%. White-light with different hues can be realized by tuning Dy³⁺ concentration in the phosphors.     

Effect of UV lamp irradiation during oxidation of Zr/Pt/Si structure on electrical properties of Pt/ZrO2/Pt/Si structure

Metal-insulator-metal (MIM) capacitors were fabricated using ZrO₂ films and the effects of structural and native defects of the ZrO₂ films on the electrical and dielectric properties were investigated. For preparing ZrO₂ films, Zr films were deposited on Pt/Si substrates by ion beam deposition (IBD) system with/without substrate bias voltages and oxidized at 200 °C for 60 min under 0.1 MPa O₂ atmosphere with/without UV light irradiation (λ = 193 nm, Deep UV lamp). The ZrO₂(∼12 nm) films on Pt(∼100 nm)/Si were characterized by X-ray diffraction pattern (XRD), field emission scanning electron microscopy (FE-SEM) and high-resolution transmission electron microscopy (HRTEM), capacitance-voltage (C-V) and current-voltage (I-V) measurements were carried out on MIM structures. ZrO₂ films, fabricated by oxidizing the Zr film deposited with substrate bias voltage under UV light irradiation, show the highest capacitance (784 pF) and the lowest leakage current density. The active oxygen species formed by UV irradiation are considered to play an important role in the reduction of the leakage current density, because they can reduce the density of oxygen vacancies.     

Preparation and characterization of TiO2 photocatalysts co-doped with iron (III) and lanthanum for the degradation of organic pollutants

Titanium dioxide photocatalysts co-doped with iron (III) and lanthanum were prepared by a facile sol-gel method. The structure of catalysts was characterized by X-ray diffraction (XRD), Raman spectroscopy, UV-vis diffuse reflectance spectroscopy and X-ray photoelectron spectroscopy (XPS). The photocatalytic activities of the samples were evaluated by the degradation of methylene blue in aqueous solutions under visible light (λ > 420 nm) and UV light irradiation. Doping with Fe³⁺ results in a lower anatase to rutile (A-R) phase transformation temperature for TiO₂ particles, while doping with La³⁺ inhibits the A-R phase transformation, and co-doping samples indicate that Fe³⁺ partly counteracts the effect of La³⁺ on the A-R transformation property of TiO₂. Fe-TiO₂ has a long tail extending up the absorption edges to 600 nm, whereas La-TiO₂ results in a red shift of the absorption. However, Fe and La have synergistic effect in the absorption of TiO₂. Compared with Fe³⁺ and La³⁺ singly doped TiO₂, the co-doped simple exhibits excellent visible light and UV light activity and the synergistic effect of Fe³⁺ and La³⁺ is responsible for improving the photocatalytic activity.     

Synthesis and characterization of hydroxyapatite/titania nanocomposites using in situ precipitation technique

Hydroxyapatite/titania nanocomposites were successfully synthesized by in situ precipitation of precursor matters from hydroxyapatite and titania at 70 °C with different hydroxyapatite/titania ratios. X-ray diffraction, Fourier transform infrared spectroscopy, Brunauer–Emmett–Teller surface, scanning and transmission electron microscopes were employed to characterize the prepared nanocomposite powders. X-ray diffraction results indicated that hydroxyapatite and anatase (TiO₂) were the major crystalline phases. By increasing the amount of titania nano-particles, Fourier transform infrared spectroscopy revealed that (PO₄)³⁻ bands at 567, 1033 cm⁻¹ decreased. Brunauer–Emmett–Teller surface results also showed a reduction in surface areas of nanocomposites. Transmission electron microscope observations revealed that the aspect ratio of hydroxyapatite/TiO₂ nanocrystals increased by increasing TiO₂ proportion in nanocomposites. The observed nanorod crystals tended to thin, elongated and plate-like in shape.     

Synthesis and characterization of Ce doped silica (SiO2) nanoparticles

A series of silica doped with different mol percentages of Ce³⁺ concentration was synthesized using a sol-gel method to determine the dependence of photoluminescence wavelengths and intensity on the concentrations of the dopants. Sol-gel glasses are porous networks that have been densified through chemical processing and heat treatment. Rare-earths (REs) are insoluble in silica; due to this insolubility RE ions in silicate glasses enter as network modifiers and compete for non-bridging oxygen in order to complete their coordination. The morphological, structural, thermal and optical properties of the phosphors were characterized by X-ray diffraction, scanning electron microscopy, UV-vis absorption, photoluminescence, thermogravimetric analyses and differential scanning calorimeter. Silica (SiO₂) gel containing Ce³⁺ ions was sputter coated with Au (gold) in order to monitor surface morphology of the samples. The highest emission intensity was found for the sample with a composition of 0.5 mol% Ce³⁺. Cerium doped silica glasses had broad blue emission corresponding to the ²D_3/2-²F_J transition at 448 nm but exhibited apparent concentration quenching above concentrations of 0.5 mol% Ce³⁺.     

Synthesis of Fe-doped NiO nanofibers using electrospinning method and their ferromagnetic properties

To make p-type diluted magnetic semiconductor (DMS), Ni_1−xFe_xO nanofibers with different Fe doping concentrations have been successfully synthesized by electrospinning method using polyvinyl alcohol (PVA) and Ni(CH₃COO)₂·4H₂O as starting materials. The nanofibers were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), Raman spectroscopy, superconductivity quantum interference device (SQUID) and X-ray photoelectron spectroscopy (XPS) test. The results show that Fe doping has no influence on the diameter and surface morphology of NiO nanofibers, and the nanofibers are polycrystalline with NaCl structure. All Fe-doped samples show obvious ferromagnetic properties and the saturation magnetization is enhanced with increase of the doping concentration of Fe, which indicates that the doped Fe has been incorporated into the NiO host and results in room-temperature ferromagnetism in the Ni_1−xFe_xO nanofibers.