乙酸修饰Ag/TiO2复合光催化剂的制备及协同催化性能

利用光化学还原法制备了Ag/TiO₂,然后通过乙酸浸渍制备了HAc-Ag/TiO₂复合光催化剂.利用X射线衍射（XRD）、透射电子显微镜（TEM）、傅里叶变换红外光谱（FTIR）、X射线光电子能谱（XPS）和紫外-可见漫反射光谱（UV-Vis DRS）等手段表征了催化剂的性质.以降解水溶液中的甲基橙（MO）为探针反应,考察了催化剂在可见光下的光催化性能.结果表明,乙酸对TiO₂的修饰在TiO₂禁带中产生了"带尾",使TiO₂的禁带宽度发生了显著的缩减;Ag纳米粒子和乙酸共同修饰的HAc-Ag/TiO₂样品具有更窄的禁带宽度和更正的价带顶位置;Ag和乙酸的协同作用使HAc-Ag/TiO₂具有良好的可见光催化活性：可见光照射2 h后,甲基橙在HAc-Ag/TiO₂上的降解率接近100%.     

Synthesis and characterization of sulfur-titanium dioxide nanocomposites for photocatalytic oxidation of cyanide using visible light irradiation

A sol-gel method was used to prepare TiO2and sulfur-TiO2(S-TiO2)nanocomposites, which were characterized by N2 adsorption-desorption, X-ray diffraction, X-ray photoelectron spectroscopy, photoluminescene, ultraviolet visible and transmission electron microscopy measurements. The photocatalytic performance of TiO2 and S-TiO2nanocomposites, with respect to the photocatalytic oxidation of cyanide under visible light irradiation, was determined. The results reveal that S is well dispersed on the surface of TiO2 nanoparticles. Additionally, the surface area of the S-TiO2nano-composites was observed to be smaller than that of the TiO2nanoparticles because of blocked pores caused by doping with S. The S-TiO2nanocomposite (0.3 wt% S) exhibited the lowest band gap and the highest photocatalytic activity in the oxidation of cyanide. The photocatalytic performance of S-TiO2(0.3 wt% S) nanocomposites was stable, even after the fifth reuse of the nanoparticles for the oxidation of cyanide.     

Ag/AgBr/TiO2 visible light photocatalyst for destruction of azodyes and bacteria

Ag/AgBr/TiO2 was prepared by the deposition-precipitation method and was found to be a novel visible light driven photocatalyst. The catalyst showed high efficiency for the degradation of nonbiodegradable azodyes and the killing of Escherichia coli under visible light irradiation (lambda>420 nm). The catalyst activity was maintained effectively after successive cyclic experiments under UV or visible light irradiation without the destruction of AgBr. On the basis of the characterization of X-ray diffraction, X-ray photoelectron spectroscopy, and Auger electron spectroscopy, the surface Ag species mainly exist as Ag0 in the structure of all samples before and after reaction, and Ag0 species scavenged hVB+ and then trapped eCB- in the process of photocatalytic reaction, inhibiting the decomposition of AgBr. The studies of ESR and H2O2 formation revealed that *OH and O2*- were formed in visible light irradiated aqueous Ag/AgBr/TiO2 suspension, while there was no reactive oxygen species in the visible light irradiated Ag0/TiO2 system. The results indicate that AgBr is the main photoactive species for the destruction of azodyes and bacteria under visible light. In addition, the bactericidal efficiency and killing mechanism of Ag/AgBr/TiO2 under visible light irradiation are illustrated and discussed.     

Ag Nanoparticle/Nanofibrillated Cellulose Composite as an Effective and Green Catalyst for Reduction of 4-Nitrophenol

In this work, silver nanoparticles (Ag NPs) prepared through in situ green and facile synthesis by using nanofibrillated cellulose (NFC) hydrogel as support, stabilizer and reducing agent by two different methods. Their catalytic abilities were examined for conversion of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP). The structure of as-synthesized composites with different AgNO₃ concentrations were characterized by ultraviolet–visible spectroscopy, field emission scanning electron microscopy, transmission electron microscopy; energy dispersive spectroscopy, Fourier transform infrared spectroscopy and X-ray diffraction. Results show that all nanocomposites demonstrated excellent catalytic activity. Among them, Ag@NFC-2 sample, with spherical and well-dispersed Ag NPs along the nanofiber, produced by the second method having 0.25 M AgNO₃ concentration presented outstanding catalytic efficiency.     

Ternary Ag/Polyaniline/Au nanocomposites: Preparation,characterization and electrochemical properties

Ternary Ag/Polyaniline/Au nanocomposites were synthesized successfully by immobilizing of Au nanoparticles (NPs) on the surface of Ag/Polyaniline (PANI) nanocomposites. Ag/PANI nanocomposites were prepared via in situ chemical polymerization of aniline in the presence of 4-aminothiophenol (4-ATP) capped silver colloidal NPs. Then, uniform gold (Au) NPs were assembled on the surface of resulted Ag/PANI nanocomposites through electrostatic interaction to get Ag/Polyaniline/Au nanocomposites. The nanocomposites were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDX), ultraviolet visible spectroscopy (UV-Vis), thermogravimetric analysis (TGA) and Fourier transform infrared spectroscopy (FTIR). Moreover, Ag/PANI/Au nanocomposites were immobilized on the surface of a glassy carbon electrode and showed enhanced electrocatalytic activity for the reduction of H₂O₂ compared with Ag/PANI.     

水热法合成多孔Ag_2S敏化二氧化钛催化剂及其可见光催化活性(英文)

Porous Ag2S sensitized TiO2 catalysts were synthesized by the hydrothermal process.The crystallization and porous structure of the Ag2S/TiO2 composite photocatalysts were investigated by X-ray diffraction,scanning electron microscopy with energy dispersive X-ray analysis,UV-Vis diffuse reflectance spectroscopy,and N2 adsorption.The Ag2S/TiO2 composites were mainly composed of anatase TiO2 and acanthite Ag2S.The absorption edge wavelengths of TiO2 and the Ag2S/TiO2 composite prepared with 3 mmol Na2S.5H2O were 400 and 800 nm,respectively,that is,the absorption edge of the composite had a pronounced red shift.The photocatalytic activity under visible light was investigated by the degradation of methylene blue with a UV-Vis spectrophotometer.The photocatalytic activities under visible light of the Ag2S/TiO2 photocatalysts were much higher than that of TiO2.     

TiO2浓度对核-壳结构Ag/TiO2纳米复合粒子结构以及三阶非线性光学性质的影响

采用光还原方法制备了核-壳结构的Ag/TiO2纳米复合粒子, 通过TEM、UV-Vis光谱和XRD表征了不同TiO2浓度下Ag/TiO2纳米复合粒子的结构和光学性质. UV-Vis光谱证明了银颗粒的存在, 且复合粒子中的银粒径随着TiO2含量的增加而增加, 同时随着TiO2浓度的增加, 银的吸收峰出现明显的增强和展宽；从TEM照片 发现, Ag/TiO2纳米复合粒子是一种以Ag为核, 外面包覆一层TiO2的核-壳结构, TiO2浓度和Ag+浓度的增加, 使得复合粒子的银颗粒粒径增大. 用Z-扫描技术, 以锁模Ti:sapphire飞秒激光器发出的脉宽为130 fs激光做光源, 在790 nm波长的光作用下, 研究了0.5%(w)Ag+含量, 不同TiO2浓度的Ag/TiO2纳米复合粒子的非线性光学特性. 结果发现, 在790 nm激光作用下, 0.25%(w)TiO2样品膜有双光子吸收和自聚焦非线性折射现象; 而当TiO2浓度为0.70%(w)时, 样品膜的非线性吸收由反饱和吸收转变为饱和吸收.     

Microwave-assisted synthesis of BiOBr/graphene nanocomposites and their enhanced photocatalytic activity

BiOBr/graphene nanocomposites were synthesized by a green single-step microwave strategy and characterized by X-ray diffraction, field-emission scanning electron microscopy, transmission electron microscopy, Raman spectroscopy, and X-ray photoelectron spectroscopy. The photocatalytic activity of the as-prepared BiOBr nanoplates and BiOBr/graphene nanocomposites for the photodegeneration of organic dyes in aqueous solution under visible light irradiation was investigated. The results show that BiOBr/graphene nanocomposites have a higher photocatalytic activity than bare BiOBr nanoplates.     

Characterization and mechanism analysis of Mo-N-co-doped TiO2 nano-photocatalyst and its enhanced visible activity

In this study, Mo-N-co-doped TiO(2) nano-photocatalysts have been synthesized through hydrolysis-precipitation method, combined with sonication posttreatment. The resulting materials were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and UV-vis diffuse reflectance spectroscopy (UV-vis DRS). XRD showed that co-doping with Mo and N favored the formation of anatase and retarded the growth of crystallite size. XPS revealed that N was incorporated into the lattice of TiO(2) through substituting oxygen atoms and coexisted in the forms of β-N and γ-N in co-doped TiO(2). Meanwhile, Mo was also incorporated into the lattice of TiO(2) through substituting titanium atoms and existed in the form of Mo(6+). DRS indicated that the light absorbance in visible region was improved by co-doping with Mo and N, leading to a narrower band gap and higher visible light photocatalytic activity for the degradation of phenol than that of pure and N-doped TiO(2). The enhanced visible light photocatalytic activity of Mo-N-co-doped TiO(2) nano-photocatalyst was attributed to the small crystallite size, narrow band gap and intense light absorbance in visible region. This study provides a new method to synthesize visible light active TiO(2)-based photocatalyst.     

N、F共掺杂TiO2可见光响应光催化剂的酸催化水解法制备及表征

采用酸催化水解法由TiCl4、NH4F混合液合成N、F共掺杂可见光响应TiO2光催化剂(TONF). 以苯酚为模型物, 考察了催化剂在可见光区、紫外光区的催化活性. 采用X射线光电子能谱(XPS)、紫外-可见漫反射光谱(DRS)、X射线衍射(XRD)、扫描电子显微镜(SEM)及低温氮物理吸附对光催化剂的晶相结构、光谱特征和表面结构等进行表征. 结果表明, 适量的N、F共掺杂TONF催化剂表现出较高的可见光催化活性. N、F共掺杂可显著提高TiO2分散性能, 促进锐钛矿相的形成, 抑制其向金红石相转变, 提高相转变温度. N掺杂可提高TiO2在可见光区的吸收; F掺杂可使TiO2能隙变窄.     

Photocatalytic degradation of pathogenic bacteria with AgI/TiO2 under visible light irradiation

The photocatalytic disinfection of pathogenic bacteria in water was investigated systematically with AgI/TiO2 under visible light (lambda > 420 nm) irradiation. The catalyst was found to be highly effective in killing Escherichia coli and Staphylococcus aureus. The adsorbed *OH and hVB+ on the surface of the catalyst were proposed to be the main active oxygen species by study of electron spin resonance and the effect of radical scavengers. The process of destruction of the cell wall and the cell membrane was verified by TEM, potassium ion leakage, lipid peroxidation, and FT-IR measurements. Some products from photocatalytic degradation of bacteria such as aldehydes, ketones, and carboxylic acids were identified by FT-IR spectroscopy. These results suggested that the photocatalytic degradation of the cell structure caused the cell death. The electrostatic force interaction of the bacteria-catalyst significantly affected the efficiency of disinfection on the basis of the E. coli inactivation under different conditions.     

S、Al掺杂TiO2纳米材料的固相合成及其可见光降解性能

采用固相反应法分别合成了硫掺杂二氧化钛(S-TiO2)、铝掺杂二氧化钛(Al-TiO2)及硫和铝共掺杂二氧化钛(S-Al-TiO2)纳米材料,并对材料进行了XRD、SEM、UV-Vis、XPS、Raman、N2吸附-脱附等物相织构表征,同时研究了材料对溴甲酚绿(BCG)的可见光降解活性。结果表明,在S-Al-TiO2纳米材料中,硫以阳离子S6+进入二氧化钛晶格,铝以同晶取代方式占据TiO2晶格中Ti的位置,其晶型为锐钛矿型。S、Al共掺杂能有效地抑制TiO2晶粒的生长,其紫外-可见漫反射吸收光谱涵盖了可见光区并延伸到近红外区域。材料的光催化活性决定于掺杂元素及其掺杂量。在25℃、pH=6.5下,S-Al-TiO2纳米材料对溴甲酚绿的可见光降解具有很高的活性,并服从一级反应动力学规律。当S与Al投料物质的量的比为1∶9时,S-Al-TiO2(1S-9Al)纳米材料对BCG的可见光降解速率常数为0.03286 min-1,分别是纯TiO2、S-TiO2及Al-TiO2的5.46、2.62和4.63倍。50 min内,S-Al-TiO2(1S-9Al)纳米材料对BCG的可见光降解率达80%。     

Bismuth-doped ordered mesoporous TiO2: visible-light catalyst for simultaneous degradation of phenol and chromium

A controllable and reproducible synthesis of highly ordered two-dimensional hexagonal mesoporous, crystalline bismuth-doped TiO(2) nanocomposites with variable Bi ratios is reported here. Analyses by transmission electron microscopy, X-ray diffraction, Raman, and X-ray photoelectron spectroscopy reveal that the well-ordered mesostructure is doped with Bi, which exists as Bi(3+) and Bi((3+x+)). The Bi-doped mesoporous TiO(2) (ms-TiO(2)) samples exhibit improved photocatalytic activities for simultaneous phenol oxidation and chromium reduction in aqueous suspension under visible and UV light over the pure ms-TiO(2), P-25, and conventional Bi-doped titania. The high catalytic activity is due to both the unique structural characteristics and the Bi doping. This new material extends the spectral response from UV to the visible region, and reduces electron-hole recombination, which renders the 2.0% Bi-doped ms-TiO(2) photocatalyst highly responsive to visible light.     

Multivalency iodine doped TiO2: preparation, characterization, theoretical studies, and visible-light photocatalysis

Multivalency iodine (I(7)+/I(-)) doped TiO(2) were prepared via a combination of deposition-precipitation process and hydrothermal treatment. The as-prepared samples were characterized by X-ray diffraction, transmission electron microscopy, Brunauer-Emmett-Teller surface area, UV-vis diffuse reflectance spectra, X-ray photoelectron spectroscopy, surface photovoltage spectroscopy, and electric-field-induced surface photovoltage spectroscopy. The electronic structure calculations based on the density functional theory revealed that upon doping, new states that originated from the I atom of the IO(4) group are observed near the conduction-band bottom region of TiO(2), and the excitation from the valence band of TiO(2) to the surface IO(4-) is responsible for the visible-light response of the I-doped TiO(2). The as-prepared I-doped TiO(2) showed high efficiency for the photocatalytic decomposition of gaseous acetone under visible light irradiation (lambda > 420 nm). A possible mechanism for the photocatalysis on this multivalency iodine (I(7)+/I(-)) doped TiO(2) under visible light was also proposed.     

Sol–gel preparation and characterization of Ag and Mg co-doped nano TiO<Subscript>2</Subscript>: efficient photocatalytic degradation of C.I. Acid Red 27

In this study, we successfully prepared pure, mono-doped, and Ag, Mg co-doped TiO₂ nanoparticles using the sol–gel method, with titanium tetraisopropoxide as the Ti source. The prepared samples were characterized by X-ray powder diffraction (XRD), specific surface area and porosity (BET and BJH) measurement, scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, photoluminescence, and energy dispersive X-ray spectroscopy techniques. The XRD data showed that the prepared nanoparticles had the same crystals structures as the pure TiO₂. Also, DRS results indicated that the band gap of co-doped photocatalyst was smaller than that of the monometallic and undoped TiO₂ and that there was a shift in the absorption band towards the visible light region. Furthermore, the photocatalytic activity of the prepared catalysts was evaluated by the degradation of C.I. Acid Red 27 in aqueous solution under visible light irradiation. The results showed that Ag (0.08 mol%), Mg (0.2 mol%) co-doped TiO₂ had the highest photoactivity among all samples under visible light. It was concluded that co-doping of the Ag and Mg can significantly improve the photocatalytic activity of the prepared photocatalysts, due to the efficient inhibition of the recombination of photogenerated electron–hole pairs. The optimum calcination temperature and time were 450 °C and 3 h, respectively.     

同轴静电纺丝法制备ZnO/Ag2O纳米纤维材料及其光电催化性能研究

以醋酸锌和乙酰丙酮银为前驱体, 通过同轴静电纺丝和热处理过程在氟掺杂氧化锡(FTO)导电玻璃上制备了ZnO/Ag₂O同轴纳米纤维. 采用X射线衍射(XRD)、 X射线光电子能谱(XPS)、 扫描电子显微镜(SEM)、 透射电子显微镜(TEM)、 拉曼光谱和紫外-可见漫反射光谱(UV-Vis DRS)等手段对材料进行了表征. 以氙灯模拟可见光光源, 亚甲基蓝为目标降解物, 考察了所制备纳米纤维的光电催化活性. 结果表明, 同轴ZnO/Ag₂O纳米纤维具有壳核类似结构(ZnO为壳, Ag₂O为核), Ag₂O与ZnO形成的异质结和杂质能级降低了ZnO的带隙能, 提高了对可见光的利用率. 在可见光下, 与纯ZnO相比, ZnO/Ag₂O具有很强的光电催化能力, 并且Ag₂O的量对同轴纤维光电催化活性影响很大, 在同样光电催化条件下, ZnO/Ag₂O-7同轴纳米纤维的光电催化效果最好, 亚甲基蓝降解率达93%, 动力学常数最大为1.13×10 ^-2 min ^-1.     

Enhanced photocatalytic activity of bimodal mesoporous titania powders by C60 modification

In this work, fullerene modified TiO(2) nanocomposites (denoted as C(60)/TiO(2)) with low C(60) loadings (0-1.5 wt.%) have been prepared by a simple hydrothermal method using tetrabutylorthotitanate (TBOT, Ti(OC(4)H(9))(4)) as the titanium precursor. The as-prepared C(60)/TiO(2) nanocomposites were characterized by X-ray diffraction, transmission electron microscopy, UV-visible spectrophotometry, nitrogen adsorption, and X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, Raman spectroscopy. The formation of hydroxyl radicals (˙OH) on the surface of UV-illuminated TiO(2) is probed by photoluminescence using terephthalic acid as a probe molecule. Our results have demonstrated that C(60) molecules can be dispersed as a monolayer onto bimodal mesoporous TiO(2)via covalent bonding. The photocatalytic oxidation rate of gas-phase acetone over C(60)/TiO(2) nanocomposites is greater than that over pure TiO(2), commercial Degussa P25 (P25) and C(60)-TiO(2) counterparts prepared by simple impregnating mixing. In particular, 0.5 wt.% C(60)/TiO(2) nanocomposites show the greatest photocatalytic activity with the rate constant k exceeding that of P25 by a factor of 3.3. Based on the results of the current study, we propose that C(60) molecules doped onto TiO(2) act as "electron acceptors" responsible for the efficient separation of photogenerated charge carriers and the enhancement of photocatalytic activity. The proposed mechanism for the observed photocatalytic performance of C(60)/TiO(2) nanocomposites is further corroborated by experiments on hydroxyl radical and transient photocurrent response.     

ZnO-based ternary nanocomposite for decolorization of methylene blue by photocatalytic dynamic membrane

In this article, novel Ag–ZnO/g-C₃N₄/GO ternary nanocomposites were prepared via co-precipitation method by 1%w Ag, 50% w g-C₃N₄, 10% w GO concentration and applied in dynamic membranes. The characteristics of Ag–ZnO/g-C₃N₄/GO nanocomposite were evaluated by various techniques such as X-ray diffraction, field emission scanning electron microscopy, energy dispersive X-ray map, transmission electron microscopy, X-ray photoelectron spectroscopy, photocatalyst. The photocatalytic degradation of methylene blue was investigated under visible light. The photocatalytic efficiency of 93.43% for methylene blue degradation was obtained for Ag–ZnO/g-C₃N₄/GO nanocomposite after 50 min of irradiation, which was remarkably higher than that of pure ZnO, bare g-C₃N₄, Ag–ZnO, and Ag–ZnO/g-C₃N₄ at the same irradiation time. Likewise, in self-forming and pre-coated membranes, ternary nanocomposites can play a vital role in the membrane surface properties, as well as their decolorization performance. The rejection of methylene blue was 30% in pure polyethersulfone membrane, while the photocatalytic degradation of methylene blue in Ag–ZnO/g-C₃N₄/GO nanocomposites was 88.46% and 98.86% after 10 and 15 min of irradiation in both self-forming and pre-coated dynamic membranes, respectively. Experimental results show that the dynamic membrane possesses a higher ability for degradation of MB in a shorter period of time than the static system.     

Vertically oriented TiO(x)N(y) nanopillar arrays with embedded Ag nanoparticles for visible-light photocatalysis

We present a straightforward method to produce highly crystalline, vertically oriented TiO(x)N(y) nanopillars (up to 1 μm in length) with a band gap in the visible-light region. This process starts with reactive dc sputtering to produce a TiN porous film, followed by a simple oxidation process at elevated temperatures in oxygen or air. By controlling the oxidation conditions, the band gap of the prepared TiO(x)N(y) can be tuned to different wavelength within the range of visible light. Furthermore, in order to inhibit carrier recombination to enhance the photocatalytic activity, Ag nanoparticles have been embedded into the nanogaps between the TiO(x)N(y) pillars by photoinduced reduction of Ag(+) (aq) irradiated with visible light. Transmission electron microscopy reveals that the Ag nanoparticles with a diameter of about 10 nm are uniformly dispersed along the pillars. The prepared TiO(x)N(y) nanopillar matrix and Ag:TiO(x)N(y) network show strong photocatalytic activity under visible-light irradiation, evaluated via degradation of Rhodamine B.     

Highly efficient visible-light-induced photocatalytic activity of nanostructured AgI/TiO2 photocatalyst

Nanostructured AgI/TiO(2) photocatalyst was synthesized by a feasible approach with AgNO(3), LiI, and Ti(OBu)(4) and characterized by X-ray diffraction, transmission electron microscopy, angle-dependent X-ray photoelectron spectroscopy, diffusive reflectance UV-vis spectroscopy, Raman spectroscopy, photoluminescence, and the Brunauer-Emmett-Teller technique. The results of characterization reveal that the nanostructured AgI/TiO(2) has a novel core/shell/shell nanostructure of AgI/Ag-I(2)/TiO(2). Compared with TiO(2) (P25) supported AgI, the formation of the nanostructure results in substantial shifting of the absorption edge of AgI to red, enhancement of the absorption intensity, and the appearance of a strong tail absorption above 490 nm, which is assigned to the absorption of I(2) and Ag. Photocatalytic tests show that the nanostructured AgI/TiO(2) photocatalyst exhibited very high visible-light-induced photocatalytic activity for the photodegradation of crystal violet and 4-chlorophenol, which is 4 and 6 times higher than that of P25 titania supported AgI, respectively. The highly efficient visible-light-induced photocatalytic activity of the nanostructured AgI/TiO(2) is attributed to its strong absorption in the visible region and low recombination rate of the electron-hole pair due to the synergetic effect among the components of AgI, Ag, I(20, and TiO(2) in the nanostructured AgI/TiO(2).