Alkoxy Derivatives of Tricyclopentadienyl Cerium (IV)

Tricyclopentadienyl cerïum(IV) chloride has been treated with various primary and secondary alcohols in benzene medium in the presence of triethylamine to give compounds, (C₅H₅)₃Ce(OR) wherein R may be CH₃ C₂H₃, n-C₂H₃, iso-C₃H₇, N-C₄H₉, iso-C₄H₉ and iso-C₃H₁₁. Infrared spectra and some physical characteristics of all these compounds and reported.     

Quenching of *UF6 (A state) by alkanes

The removal of *UF₆ (A state) molecules by selected alkanes has been investigated at 25°C. The following rate constants (units of 10¹¹ l/mol·sec) were evaluated: iso-C₄F₁₀, 0.0432 ± 0.0115; n-C₄F₁₀, 0.0764 ± 0.020; C₂F₆, 0.0192 ± 0.0052; CH₄, 0.0612 ± 0.0061; C₂H₆, 3.78 ± 0.60; C₃H₈, 5.08 ± 0.60; n-C₄H₁₀, 5.05 ± 0.78; iso-C₄H₁₀, 4.17 ± 1.15; neo-C₅H₁₂, 6.59 ± 0.93; CF₃? CH₃, 0.0385 ± 0.0056; CF₂H? CF₂H, 0.0729 ± 0.0074; and CF₂H? CFH₂, 0.149 ± 0.015. The perfluoro-alkane quenching of *UF₆ proceeds via a physical mechanism. The other alkane quenching reactions are consistent with a chemical mechanism also contributing in varying degrees which may involve removal of two hydrogens from the alkane.     

Evaluated and estimated kinetic data for phase reactions of the hydroperoxyl radical

Methods are discussed for the production and detection of the hydroperoxyl radical for use in gas phase kinetic studies. Rate constants for gas phase reactions of the hydroperoxyl radical with itself, H₂, H₂O, CO, NO, SO₂, O₃, C₂H₆, C₃H₈, i-and n-C₄H₁₀, C₂H₄, i-C₄H₈, HCHO, C₂H₅CHO, n-C₃H₇CHO, Br, O, OH, and H are critically evaluated. Recommended or estimated rate constant expressions with associated error limits are given applicable over specified temperature ranges (normally 300–1000°K). The reactivity of HO₂ compared with OH, O, H, F, Cl, Br, CH₃, and CH₃O is presented in tabular form and the implications for atmospheric chemistry are discussed.     

Thermodynamic interactions in rubbery polymer/gas systems

The Flory–Huggins interaction parameters χ for 23 gases (He, Ne, Ar, Kr, Xe, H₂, N₂, O₂, N₂O, CO₂, CH₄, C₂H₄, C₂H₆, C₃H₆, C₃H₈, 1,3-C₄H₆, four C₄H₈'s, n-C₄H₁₀, iso-C₄H₁₀, and n-C₅H₁₂) in five rubbery polymers (1,2-polybutadiene (PB), poly(ethylene-co-vinyl acetate)) (EVAc), polyethylene (PE), polypropylene (PP), and poly(dimethyl siloxane) (PDMS) were determined from either literature data on Henry's law coefficient and partial molar volume or those on sorptive dilation for each polymer/gas system. Values of χ for the gases increased in the order of PDMS < PP ≡ PB < EVAc ≡ PE. Among the gases except He and H₂ whose χ values are not reliable, Ne and Xe have respectively the highest and the lowest values of χ for the polyolefins. The χ values of the hydrocarbons were compared together with previously reported χ values of n-alkanes C₃-C₁₀. The dependencies of χ upon concentration and temperature were discussed on the basis of the literature data. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35 : 1049–1053, 1997     

Vinyl polymerization initiated by system of organic halides and tertiary amines

A study of the polymerization of vinyl monomers with binary systems of tertiary amines and various organic halides containing chemical bonds such as C? Cl, N? Cl, O? Cl, S? Cl, and Si? Cl has been made at 60°C. Some of the binary systems were found to be effective as radical initiator in the polymerization of methyl methacrylate. The relative initiating activities of the halides in the presence of dimethylaniline were found to be in the following order: tert-C₄H₉OCl > n-C₄H₉NCl₂ > (n-C₄H₉)₂NCl ? CH₃SiCl₃ ? C₆H₅SiCl₃ > C₆H₅SO₂Cl > C₆H₅Cl > C₆H₅PCl₂. Styrene and vinyl acetate polymerized only with the initiator system of dimethylaniline and benzyl chloride. Tri-n-butylamine was less active than dimethylaniline. Pyridine and 4-vinylpyridine, in combination with some organic halides, also initiated the polymerization of methyl methacrylate. The N-vinylcarbazole–benzenesulfonyl chloride system, in the presence of methyl methacrylate, gave only the homopolymer of N-vinylcarbazole.     

Übergangsmetall-Fulven-Komplexe: XXXI. Die Reaktivität des [η5-(C5H4CHO)M(CO)3]−-Anions (M  Mo,W) gegenüber Carbonsäurechloriden

The reactivity of the (η⁵-formylcyclopentadienyl)M(CO)₃ anions (M  Mo, W) towards acyl chlorides has been studied. Acetyl chloride reacts with the anions to give two different types of substituted cyclopentadienyl complexes: [M(Cl)(η⁵-C₅H₄CH₂OC(O)CH₃)(CO)₃] and [M(η¹-CH₃CO)(η⁵-CH₃CO)(η⁵-C₅H₄CH₂OC(O)CH₃)(CO)₃]. The reaction of the anions with benzoyl chloride only yields the chloro complexes [M(Cl)(η⁵-C₅H₄CH₂OC(O)C₆H₅)(CO)₃]. The molecular structure of [W(Cl)(η⁵-C₅H₄CH₂OC(O)CH₃)(CO)₃] has been determined by X-ray diffraction studies.     

Polymerization of cyclic esters of phosphoric acid. VI. Poly(alkyl ethylene phosphates). Polymerization of 2-alkoxy-2-oxo-1,3,2-dioxaphospholans and structure of polymers

Five-membered cyclic esters of phosphoric acid of the general formula: ? CH₂CH(R)OP(O)-(OR′)O? polymerize readily to solid, soluble polymers of high molecular weight without any rearrangement known for various tri- and pentavalent organophosphorus monomers. ¹H-, ¹³C-, and ³¹P-NMR spectra of polymers confirmed their linear structure: where R is H, with R′ = CH₃, C₂H₅, n-C₃H₇, i-C₃H₇; n-C₄H₉, CCl₃CH₂, or C₆H₅, or R is CH₂Cl and R′ is C₂H₅. The use of n-C₄H₉Li, (C₅H₅)₂Mg, or (i-C₄H₉)₃Al as initiators leads to polymers with M _n = 10⁴–10⁵.     

The use of transition-state theory to extrapolate rate coefficients for reactions of oh with alkanes

A method is described for extrapolating existing experimental data on the reactions of OH radicals with alkanes to higher temperatures using conventional transition-state theory. Expressions are developed for the estimation of the structural properties of the activated complex necessary for calculating ΔS^± and ΔH^±. The vibrational frequencies and internal rotations of the activated complex are given by those of the reacting alkane or the analogous alcohol and a set of additional internal modes that is the same for all OH + alkane reactions considered. Differences between primary, secondary, and tertiary hydrogen attack are discussed, and the validity of representing the activated complexes of all OH + alkane reactions by a fixed set of vibrational frequencies and other internal modes is evaluated. Calculations are presented for the reaction of OH with CH₄, C₂H₆, C₃H₈, n-C₄H₁₀, i-C₄H₁₀, c-C₄H₈, c-C₅H₁₀, c-C₆H₁₂, (CH₃)₂CHCH(CH₃)₂, (CH₃)₃CCH(CH₃)₂, (CH₃)₄C, and (CH₃)₃CC(CH₃)₃, and the results are compared with experiments.     

Synthesis and structures of fulvene-bridged diruthenium complexes

Three diruthenium carbonyl complexes, namely (η ³:η ⁵-C₅H₄C(CH₂)₂)Ru₂(CO)₅ (1), (η ³:η ⁵-C₅H₄C(CHCH₂)(C₂H₅))Ru₂(CO)₅ (2), and (η ¹:η ⁵-C₅H₄C₅H₈)Ru₂(CO)₆ (3), were obtained from the reactions of C₅H₄C(Me)₂, C₅H₄C(Et)₂, and C₅H₄C(CH₂)₄, respectively, with Ru₃(CO)₁₂ in refluxing xylene. The complexes were characterized by elemental analysis, IR and ¹H NMR spectra. Single-crystal X-ray diffraction analysis for complexes 1 and 2 revealed that the fulvene ligands bridge two ruthenium atoms in η ³:η ⁵ fashion.     

Study on ketalization reaction of poly(vinyl alcohol) by ketones. VIII. kinetic study on acetalization and ketalization reactions of poly(vinyl alcohol)

The kninetics of acid-catalyzed acetalization and ketalization of poly(vinyl alcohol) (PVA) were systematically studied in completely homogeneous media with carefully selected solvents. Thus the acetalization reaction was run in water with six aldehydes [R₁CHO (R₁ = H, CH₃, C₂H₅, n-C₃H₇, i-C₃H₇, ClCH₂)], whereas the ketalization in dimethylslfoxide with 11 ketones [R₂CH₃CO (R₂ = CH₃, C₂H₅, n-C₃H₇, i-C₃H₇, n-C₄H₉, i-C₄H₉, tert-C₄H₉, C₆H₅CH₂, C₆H₅CH₂CH₂), cyclopentanone, and cyclohexanone]. The latter was difficult to proceed in aqueous media. Both reactions were reversible and bimolecular and, despite the use of different solvents, gave similar heats of reaction (7.5 kcal/mol) and activation energies (ca. 15 kcal/mol) except for the case of formaldehyde and chloroacetaldehyde; however the equilibrium constants at 25°C showed that the acetalization is thermodynamically much more favored than the ketalization (ca. 5000 vs. 0.01–0.9), probably because of steric hindrance of the ketone substrate. The rate constants of hydrolysis (reverse reactions) for the poly(vinyl acetal) and poly(vinyl ketal) followed the Hammett-Taft equation to give a single p* (=3.60) that is very close to that for the hydrolysis of diethyl acetal and ketal. From these and other data, it was concluded that the polymer hydrolysis, as well as PVA acetalization and ketalization, are all electrophilic reaction where the formation of hemiacetal or hemiketal is the rate-determining step. © 1996 John Wiley & Sons, Inc.     

Photochemistry of methyl- and n1-benzyl-n5-cyclopentadienyltricarbonyltungstein(II)

Irradiation of solutions of n⁵-C₅H₅W(CO)₃R (R  CH₃n1-CH₂C₆H₅) in cyclohexane at ca. 310490 nm leads to the formation of [n⁵-C₅H₅W(CO)₃]₂ and methane and of n⁵-C₅H₅W₅(CO)₂(n³-CH₂C₆H₅) and some [n⁵-C₅H₅W(CO)₃]₂, respectively. When the irradiation is carried out in the presence of excess P(C₆H₅)₃, the photoproducts are n⁵-C₅H₅W(CO)₂[P(C₆H₅)₃]CH₃ (R  CH₃) and n⁵-C₅H₅W(CO)₂(n₃-CH₂C₆H₅) and trace [n⁵-C₅H₅W(CO)₃]₂ (R  n¹-CH₂C₆H₅). Photolysis of the n⁵-C₅H₅W(CO)₃R in the presence of benzyl chloride affords n⁵-C₅H₅W(CO)₃Cl (R  CH₃) and both n⁵-C₅H₅W(CO)₂(n³-CH₂C₂H₅) and n⁵-C₅H₅W(CO)₃Cl (R  n¹-CH₂C₆H₅), the relative amounts of the latter products depending on the quantity of added C₆H₅CH₂Cl. Irradiation of n⁵-C₅H₅W(CO)₃-CH₃ in the presence of both P(C₆h₅)₃ and C₆H₅CH₂Cl affords n⁵-C₅H₅W(CO)₂-[P(C₆H₅)₃]CH₃, but no n⁵-C₅H₅W(CO)₃Cl. It is proposed that the primary photo-reaction in these transformations is dissociation of a CO group from n⁵-C₅H₅W-(CO)₃R to generate n⁵-C₅H₅W(CO)₂R, which can either combine with L to form a stable 18 electron complex, n⁵-C₅H₅W(CO)₂(L)R (L  CO, P(C₅H₅)₃; LR  n³-CH₂C₆H₅), or lose the group R in a competing, apparently slower step. This proposal receives support from the observation that, light intensifies being equal, n⁵-C₅H₅W(CO)₃CH₃ undergoes a considerably faster photoconversion to [n⁵-C₅H₅W(CO)₃]₂ under argon than under carbon monoxide.     

Trinuclear π-cyclopentadienyl bridging sulphido derivatives of iron

The reaction of [Fe(π-C₅H₅)(CO)₂]₂ with the dialkyl disulphides R₂S₂ (R = CH₃, C₂H₅, t-C₄H₉ or CH₂C₆H₅) affords, as well as dinuclear derivatives of the type [Fe(π-C₅H₅)(CO)SR]₂, trinuclear species of formula [Fe₃(π-C₅H₅)₃(CO)₂(S)SR].     

Organische Phosphorverbindungen XXXVIII. Darstellung und Eigenschaften von Tris-(dialkoxyphosphonyl-methyl)-, Tris-(alkoxyphosphinyl-methyl)-und Tris-(oxophosphoranyl-methyl)-phosphinsäureestern sowie der entsprechenden Säuren [1]

Tris-chloromethyl-phosphine oxide, (ClCH₂₎₃ P?O(I), is obtained by chlorination of (HOCH₂₎₃P?O with PCl₅ or (C₆H₅₎₃PCl₂, and also by oxidation of (CICH₂₎₃P?O and (ClCh₂₎₂(CH₃)P?O. High yields of tris-(dialkyloxyphosphonly-methyl)-phosphine oxides, [RO₂(O)PCH_2]2P?O (II) (R?CH₃, C₂H₅, iso-C₃H₇, n-C₄H₉, 2- ethyl-hexyl), tris (alkyloxyphosphinyl-methyl)-phosphine oxides, [R₂(O)PCH_2]3P?O(R = C₆H₅, CH₃) are obtained by heating tris-chloromethyl-phosphine oxides, [(RO) (R′) (O)PCH_2]3P?O (R = C₄H₉, R′? C₆H₅) and tris-(oxophosphoranyl-phosphine oxides with phosphites, phosphonites and phosphinites, respectively, at 170–180°C for several hours. Compounds II possess an extraordinarily high absorption capacity. Thus a warm. 2% solution of II (R = C₂H₅) in benzene solidifies completely on cooling so that no benzene can be poured off. Tris-dihydroxyphosphonyl-methyl)-phosphine oxide, [(HO)₂(O)PCH_2]3P?O, obtained by hydrolysis of II (R ? C₂H₅) with refluxing conc. HCl or by thermal decomposition of II (R ? iso-C₃H₇) at 190°, titrates in aqueous solution as a hexabasic acid with breaks at pH = 4,4 (three equivalents) and pH = 10,7 (three equivalents). It forms crystalline salts with amines, alkali and alkaline earth metals, and is an excellent chelating agent. The ¹H- and ^31?P-NMR. spectra of all the compounds prepared are discussed.     

Nonisothermal membrane phenomena across perfluorosulfonic acid-type membranes,Flemion S: part I. Thermoosmosis and transported entropy of water

Solvent transports across the perfluorosulfonic acid-type membrane Flemion S were measured for aqueous electrolyte solutions under a temperature difference and under an osmotic pressure difference. H⁺, Li⁺, Na⁺, K⁺, NH ₄ ⁺ , CH₃NH ₃ ⁺ , (CH₃)₂NH ₂ ⁺ , (CH₃)₃NH⁺, (CH₃)₄N⁺, (C₂H₅)₄N⁺, (n-C₃H₇)₄N⁺ and (n-C₄H₉)₄N⁺ were used as counterions. Water flux across the membrane in HCl solution is higher than that in the other electrolyte solutions because hydrogen ions can exchange with the hydrogen of the neighbor water molecules and contribute to the water transport across the membrane as a proton jump in conductivity. The direction of thermoosmosis across the membrane in HCl, NaCl, (CH₃)₄NCl and (C₂H₅)₄NCl solutions was from the cold side to the hot side and that in LiCl, KCl, NH₄Cl, CH₃NH₃Cl, (CH₃)₂NH₂Cl and (n-C₄H₉)₄NBr solutions was from the hot side to the cold side, although thermoosmosis across anion-exchange membranes always occurs toward the hot side.     

Bis(cyclopentadienyl)methan-verbrückte Zweikernkomplexe,V. Heteronukleare Co/Rh-, Co/Ir-, Rh/Ir- und Ti/Ir-Komplexe mit dem Bis(cyclopentadienyl)methan-Dianion als Brückenliganden

Bis(cyclopentadienyl)methane-bridged Dinuclear Complexes, V^[1]. – Heteronuclear Co/Rh-, Co/Ir-, Rh/Ir-, and Ti/Ir Complexes with the Bis(cyclopentadienyl)methane Dianion as Bridging Ligand^* The lithium and sodium salts of the [C₅H₅CH₂C₅H₄]^- anion, 1 and 2 , react with [Co(CO)₄I], [Rh(CO)₂Cl]₂, and [Ir(CO)₃Cl]n to give predominantly the mononuclear complexes [(C₅H₅-CH₂C₅H₄)M(CO)₂] ( 3, 5, 7 ) together with small amounts of the dinuclear compounds [CH₂(C₅H₄)₂][M(CO)₂]₂ ( 4, 6, 8 ). The ¹H- and ¹³C-NMR spectra of 3, 5 , and 7 prove that the CH₂C₅H₅ substituent is linked to the π-bonded ring in two isomeric forms. Metalation of 5 and 7 with nBuLi affords the lithiated derivatives 9 and 10 from which on reaction with [Co(CO)₄I], [Rh(CO)₂Cl]₂, and [C₅H₅TiCl₃] the heteronuclear complexes [CH₂(C₅H₄)₂][M(CO)₂][M′(CO)₂] ( 11–13 ) and [CH₂(C₅H₄)₂]-[Ir(CO)₂][C₅H₅TiCl₂] ( 17 ) are obtained. Photolysis of 11 and 12 leads almost quantitatively to the formation of the CO-bridged compounds [CH₂(C₅H₄)₂][M(CO)(μ-CO)M′(CO)] ( 14, 15 ). According to an X-ray crystal structure analysis the Co/Rh complex 14 is isostructural to [CH₂(C₅H₄)₂][Rh₂(CO)₂(μ-CO)] ( 16 ).     

Reductions of metal carbonyls by quaternary ammonium borohydrides

Quaternary ammonium borohydrides, used directly or generated in phase transfer reactions, are highly effective reagents for preparing metal carbonyl anions from metal carbonyls [Mo(CO)₆, Mn₂(CO)₁₀, Re₂(CO)₁₀, CO₂(CO)₈, Fe₃(CO)₁₂, Ru₃(CO)₁₂ and (η⁵-C₅H₅)₂Mo₂(CO)₆] and from some metal carbonyl halides [BrMn(CO)₅ and η⁵-C₅H₅Mo(CO)₃Cl]. Where strongly basic anions would be formed from a halide [BrMn(CO)₄PPh₃ and η⁵-C₅H₅Ru(CO)₂Br], the reactions provide efficient syntheses of the corresponding hydrides instead. The anion η⁵-C₅H₅Fe(CO)₂^? is not accessible by these techniques; reaction of η⁵-C₅H₅Fe(CO)₂Br yields the iron dimer (via the highly nucleophilic anion) and the dimer is unreactive toward Q⁺BH₄^?. Reductions of Re₂(CO)₁₀ conducted in CH₂Cl₂ provide Re₂(CO)₉Cl^? in high yield.     

Synthesis and structures of bridged biscyclopentadienyl diiron complexes

Three diiron carbonyl complexes, namely [(η ⁵-C₅H₄)(η ³-C(CH₂)₂)]Fe₂(CO)₅ (1), [(C₂H₅)₂C(η ⁵-C₅H₄)₂]Fe₂(μ-CO)₂(CO)₂ (2), and [(CH₂)₄C(η ⁵-C₅H₄)(η ⁵-C₅H₃)(C₅H₉)]Fe₂(μ-CO)₂(CO)₂ (3), have been synthesized by the reactions of C₅H₄C(Me)₂, C₅H₄C(Et)₂, and C₅H₄C(CH₂)₄, respectively, with Fe(CO)₅ in refluxing xylene. The complexes have been characterized by elemental analysis, IR, and ¹H NMR spectra. The molecular structures of the complexes have been determined by single-crystal X-ray diffraction. The structures of the complexes indicate that fulvenes can be bound to transition metal centers by diverse modes.     

Novel Copolymers of Styrene. 3. Some Ring-Substituted Butyl 2-Cyano-3-Phenyl-2-Propenoates

Novel trisubstituted ethylenes, ring-substituted butyl 2-cyano-3-phenyl-2-propenoates, RPhCH=C(CN)CO₂C₄H₉ (where R is 2-C₆H₅CH₂O, 3-C₆H₅CH₂O, 4-C₆H₅CH₂O, 4-CH₃COO, 3-CH₃CO, 4-CH₃CO, 4-CH₃CONH, 2-CN, 3-CN, 4-CN, 4-(CH₃)₂N, 4-(C₂H₅)₂N) were prepared and copolymerized with styrene. The monomers were synthesized by the piperidine catalyzed Knoevenagel condensation of ring-substituted benzaldehydes and butyl cyanoacetate, and characterized by CHN analysis, IR, ¹H and ¹³C-NMR. All the ethylenes were copolymerized with styrene (M₁) in solution with radical initiation (ABCN) at 70°C. The compositions of the copolymers were calculated from nitrogen analysis and the structures were analyzed by IR, ¹H and ¹³C-NMR. The order of relative reactivity (1/r₁) for the monomers is 4-C₆H₅CH₂O (6.39) > 2-C₆H₅CH₂O (2.06) > 3-CH₃CO (1.86) > 3-C₆H₅CH₂O (1.78) > 4-CH₃COO (1.58) > 3-CN (1.47) > 4-CN (1.21) > 4-(C₂H₅)₂N (1.19) > 4-(CH₃)₂N (1.18) > 2-CN (1.04) > 4-CH₃CO (0.71) > 4-CH₃CONH (0.63). Decomposition of the copolymers in nitrogen occurred in two steps, first in the 200–500°C range with residue (3.6–9.5% wt), which then decomposed in the 500–800°C range.     

Photochemical reactions of allyl and crotyl halides with cyclopentadienyl-chromium, -molybdenum and -tungsten complexes

[MoCl(CO)₃(η⁵-C₅H₅)] on photolysis with allyl or crotyl halides C₅H₄RX gives Mo^IV complexes [MoX₂(CO)(η³-C₃H₄R)(η⁵-C₅H₅)] (R = H, X = Cl, Br, I; R = Me, X = Cl, Br). [WCl(CO)₃(η⁵-C₅H₅)] under similar conditions gives trihalides [WX₃(CO)₂(η⁵-C₅H₅)] (X = Cl, Br) on reaction with C₃H₅Cl and C₃H₅Br while [WCl(CO)₃(η⁵-C₅H₄SiMe₃)] and [CrI(CO)₃(η⁵-C₅H₅)] react with allyl chloride to give [WCl₃(CO)₂(η⁵-C₅H₄SiMe₃)] and [CrCl₂(η⁵-C₅H₅)] respectively.