Fluorescence quenching using plasmonic gold nanoparticles

This communication describes the study of fluorescence quenching in a new fluorescent laser dye ADS680HO is attached to gold nanoparticles of size 4-12 nm. Photo physical properties confirms that it is due to size, shape, coupling between nanoparticles with laser dye ADS680HO, and energy transfer between dye and nanoparticles. Fluorescence quenching leads to advancement in biomolecular labeling and fluorescence patterning.     

Anisotropic gold nanoparticles and gold plates biosynthesis using alfalfa extracts

Industrial and medical applications for gold nanoparticles are extensive, yet highly dependent on their chemical and structural properties. Thus, harnessing the size and shape of nanoparticles plays an important role in nanoscience and nanotechnology. Anisotropic polyhedra and nanoplates were biosynthesized via reduction of 3 mM AuCl₄ ⁻ solution at room temperature. Alfalfa biomass extracts prepared in water and in isopropanol separately were used as reducing agents at pH 3.5 and 3.0, respectively. Nanoparticles observed in the isopropanol extract presented a size range of 30–60 nm, and the morphologies present included 30 nm decahedra and 15 nm icosahedra. Gold nanoplates produced in the water extract were mainly triangular, ranging from 500 nm to 4 μm in size. The resulting nanoparticles and nanoplates can be potentially used in the study of their unique physical properties and for the mechanisms of formation using alfalfa biomass extracts.     

One-pot synthesis of gold nanoparticles using tetradentate porphyrins

In this study, the meso-tetra (p-hydroxyphenyl) porphyrin and meso-tetra (m-hydroxyphenyl) porphyrin were coated on to gold nanoparticles (AuNPs) via thioacetate anchors which easily dissociate to form S–Au bonds. 4-tert-butyl phenyl thioacetate-AuNPs were prepared and used as a monodentate passivant to control the size of the tetradentate porphyrin-AuNPs. The porphyrin-coated AuNPs were characterized by UV–Vis, TEM, XRD, and XPS analyses. The tetradentate porphyrin-AuNPs size is within a range of 5–15 nm in diameter with exotic shapes. The plausible network formation for AuNP@p-TPP-SAc and the capping structure of the AuNP@m-TPP-SAc have been suggested.     

Advantages of using gold hollow nanoshells in cancer photothermal therapy

Lots of studies have been conducted on the optical properties of gold nanoparticles in the first region of near infrared(650 nm–950 nm), however new findings show that the second region of near-infrared(1000 nm–1350 nm) penetrates to the deeper tissues of the human body. Therefore, using the above-mentioned region in photo-thermal therapy(PTT) of cancer will be more appropriate. In this paper, absorption efficiency is calculated for gold spherical and rod-shaped nanoshells by the finite element method(FEM). The results show that the surface plasmon frequency of these nanostructures is highly dependent on the dimension and thickness of shell and it can be adjusted to the second region of near-infrared. Thus, due to their optical tunability and their high absorption efficiency the hollow nanoshells are the most appropriate options for eradicating cancer tissues.     

Increasing the stability of DNA-functionalized gold nanoparticles using mercaptoalkanes

In this work, the stability of DNA functionalized gold nanoparticles was examined in relation to their size, temperature, as well as the presence of mono- and bivalent ions. Furthermore, we report on the stabilizing effect of an additional post-functionalization with mercaptoalkanes, optionally bearing triethylene glycol (TEG) units. Although such so-called backfilling molecules are commonly used for planar gold surfaces, they have rarely been reported in combination with DNA-functionalized nanoparticles. Our results show that, conform the DLVO theory, smaller citrate-capped gold nanoparticles were more stable towards higher concentrations of salt. Citrate nanoparticles of 30 nm in size were only stable in sodium chloride concentrations up to ~0.05 M and up to 45 °C. The stability of these uncoated nanoparticles was even lower when bivalent salts were used (i.e. <2 × 10⁻⁴ M). Immobilization of DNA on these nanoparticles, on the other hand, improved the stability in salt solutions with at least one order of magnitude. The additional use of backfilling molecules stabilized the gold nanoparticles even further, without negatively affecting the DNA hybridization efficiency. DNA functionalization also had a positive impact on the thermal stability of the nanoparticles. Unfortunately, this beneficial effect was not observed after a subsequent backfilling step.

     

Optical manipulation of gold nanoparticles using an optical nanofiber

Gold nanoparticles are gaining increasing attention due to their biological and medical applications.In this letter,we experimentally demonstrate the optical manipulation of 250-nm-diameter gold nanoparticles along an optical nanofiber(550 nm in diameter) injected by an 808-nm laser light.The nanoparticles situated in the evanescent optical field are trapped by optical gradient force and move along the direction of light propagation due to optical scattering force.The velocities reach as high as 132 μm/s at an optical power of 80 mW.     

Subdiffraction scattered light imaging of gold nanoparticles using structured illumination

A reflective light-scattering (RLS) microscope with structured illumination (SI) provides subdiffraction resolution and improves the image quality of gold nanoparticles in biological systems. The three-dimensional (3D)-structured pattern is rapidly and precisely controlled with a spatial light modulator and scrambled at the conjugate image plane to increase spatial incoherence. The reconstructed SI-RLS image of 100?nm gold nanoparticles reveals lateral and axial resolutions of approximately 117 and 428?nm. We present a high-resolution image of gold nanoparticles inside a HeLa cell, with improved contrast.     

Investigation of surface plasmon biosensing using gold nanoparticles enhanced ellipsometry

We present a label-free, nondestructive and high sensitivity biosensor by using the phase information of a gold nanoparticles enhanced ellipsometry signal. The refractive index (RI) resolution from ellipsometric phase information is of the order of 1.6×10(-6) RI units. Furthermore, spectroscopic and dynamic measurements show substantial change in the phase signal when biomolecules are coated on gold nanoparticles. The detection limit of our proposed technique is up to ～18?pM concentration of the target biomolecules.     

Lithography-free fabrication of large-area plasmonic nanostructures using colloidal gold nanoparticles

We report simple and efficient fabrication of large-area gold nanostructures using solution-processible gold nanoparticles, where lithography and vacuum evaporation techniques are not involved in the fabrication processes. These gold nanoisland structures exhibit strong particle plasmon resonance that is characterized by optical extinction spectroscopy in the visible spectral range. The tunability of the optical response is realized by controlling the annealing temperature and by changing the concentration of the colloidal solutions of gold nanoparticles. This enables a low-cost route for exploiting new photonic devices, biosensors, and optoelectronic devices with localized field-enhancement.     

Bridging the nanogap electrodes with gold nanoparticles using dielectrophoresis technique

We report the assembling of 20 nm gold nanoparticles into the nanogap electrodes by dielectrophoresis (DEP) technique. DEP was performed on electrodes with different gap size values. While the frequency and the applied peak to peak voltage were maintained at 1 MHz and 3 V, respectively, DEP time was varied in accordance with electrodes gap size. Interestingly, some novel assembling was observed during the dielectrophoresis process and the nanogaps were bridged by nanoparticles either forming ring shaped bridges or linear bridges. The assembling of nanoparticles in different form is attributed to the positive DEP effect. This effect is seen to be influenced significantly by the time parameter during which DEP was performed. Results show the promise of dielectrophoresis in controlled engineering of nanoparticles assembly.     

Fabrication of microelectrodes using flow layer-by-layer self assembly of gold nanoparticles

Microelectrodes to be used in microfluidic devices were prepared from the layer-by-layer flow deposition of gold nanoparticles. Pre-designed microfluidic channels were used as templates for the flow driven deposition of the nanoparticles in sequence with poly (diallyldimethyl amonium chloride) (PDADMAC). The electrical resistivity of the gold nanoparticle assembly was found to be strongly dependant on the concentration of sodium citrate used in the gold nanoparticle synthesis. As the electrical properties of the film changed from insulating to conducting when decreasing the citrate concentration, a 4 point probe setup was used to measure the resistivity of the film. Near bulk conductivity (5.42 × 10⁻⁶ Ω cm) was achieved with only 10 layers of film. The thickness and morphology of the flow-printed multilayer microelectrode was characterized using atomic force microscopy (AFM) and a field emission scanning electron microscope (FE-SEM). To demonstrate its usefulness, the microelectrode assembly was then tested toward the detection of KCl in solution, having a concentration ranging from 1 to 20 mM using AC current detection in a simple setup. Good linearity and stability of the electrode confirmed that this method could be very convenient for the fabrication of microelectrodes for lab-on-chip applications.     

Simple colorimetric detection of doxycycline and oxytetracycline using unmodified gold nanoparticles

The interaction between tetracycline antibiotics and gold nanoparticles was studied. With citrate-coated gold nanoparticles as colorimetric probe, a simple and rapid detection method for doxycycline and oxytetracycline has been developed. This method relies on the distance-dependent optical properties of gold nanoparticles. In weakly acidic buffer medium, doxycycline and oxytetracycline could rapidly induce the aggregation of gold nanoparticles, resulting in red-to-blue (or purple) colour change. The experimental parameters were optimized with regard to pH, the concentration of the gold nanoparticles and the reaction time. Under optimal experimental conditions, the linear range of the colorimetric sensor for doxycycline/oxytetracycline was 0.06–0.66 and 0.59–8.85 μg mL^?1, respectively. The corresponding limit of detection for doxycycline and oxytetracycline was 0.0086 and 0.0838 μg mL^?1, respectively. This assay was sensitive, selective, simple and readily used to detect tetracycline antibiotics in food products.     

High temperature instability of hollow nanoparticles

The concept of the Gibbs energy balance is used to derive the evolution equation of both surfaces of a hollow nanosphere. The process is driven by reducing the surface energy and the elastic energy stored in the bulk. A semianalytical solution is provided for the time period during which a hollow nanosphere shrinks to a compact nanospherical particle. Comparison with recently reported results is performed.     

ICP-MS: a powerful technique for quantitative determination of gold nanoparticles without previous dissolving

A direct and simple inductively coupled plasma mass spectroscopy (ICP-MS) method for the determination of gold nanoparticles (AuNP) with different particle sizes ranging from 5 to 20 nm and suspended in aqueous solutions is described. The results show no significant difference compared to the determination of the same AuNPs after digestion, as claimed by the literature. The obtained limit of quantification of the method is 0.15 μg/L Au(III) that corresponds to 4.40 × 10⁹ AuNP/L, considering spherical AuNPs 15 nm sized. Spike recovery experiments have shown that the sample matrix is a significant factor influencing the accuracy of the measurement. Spike recoveries from 93% to 95% are found for AuNP samples prepared in trisodium citrate, while for deionized H₂O a spike recovery of around 80% was obtained. The sample preparation mode along with the ICP-MS parameters have been optimized and found to be crucial so as to achieve the required accuracy for the direct quantification of AuNP suspensions. The effect of the nanoparticle size upon the ICP-MS signal also was studied, and only significant differences due to the chemical environment and not to the AuNPs size were found.     

Shape evolution of gold nanoparticles

The tetraoctylammonium bromide-stabilized gold nanoparticles have been successfully fabricated. The shape evolution of these nanoparticles under different annealing temperatures has been investigated using high-resolution transmission electron microscopy. After an annealing at 100 °C for 30 min, the average diameters of the gold nanoparticles change a little. However, the shapes of gold nanoparticles change drastically, and facets appear in most nanoparticles. After an annealing at 200 °C for 30 min, not only the size but also the shape changes a lot. After an annealing at 300 °C for 30 min, two or more gold nanoparticles coalesce into bigger ones. In addition, because of the presence of Cu grid during the annealing, some gold particles become the nucleation sites of Cu₂O nanocubes, which possess a microstructure of gold-particle core/Cu₂O shell. These Au/Cu₂O heterostructure nanocubes can only be formed at a relatively high temperature (≥300 °C). The results can provide some insights on controlling the shapes of gold nanoparticles.     

Ripening of nanowire-supported gold nanoparticles

Gold nanoparticles have applications ranging from catalysts for low temperature oxidation of CO to solar energy capture in the infrared. For all these applications, particle size and shape are critical. In this study, nanoparticle gold formed on GaN nanowires by plasma-enhanced chemical vapor deposition was annealed at temperatures ranging from 150 to 270 °C for 24 h. Particle size was measured before and after annealing using a field emission scanning electron microscope. Ripening of the gold particles was observed even at the lowest annealing temperatures of the study. The particle growth kinetics showed an Arrhenius relationship with activation energy of 27.38 kJ/mol. This value suggests that ripening occurs by particle migration and coalescence rather than adatom diffusion.     

Living fungal hyphae-templated porous gold microwires using nanoparticles as building blocks

Abstract  

A simple and environmentally benign green method is reported to decorate growing fungal hyphae with high loading of gold nanoparticles, which were initially produced using aqueous tea extract as a sole reducing/stabilizing agent. Inoculation of fungal spores in aqueous suspension of nanoparticles led to the growth of intensely red-coloured fungal hyphae due to the accumulation of gold nanoparticles. Heat treatment of these hybrid materials led to the formation of porous gold microwires. This report is thus an interesting example of using green and sustainable approach to produce nanostructured materials which have potential applications in catalysis, sensing and electronics.     

Formation and encapsulation of gold nanoparticles using a polymeric amine reducing agent

We report on the use of poly(allylamine) hydrochloride (PAH) as a reducing agent for the controlled formation of gold nanoparticles (AuNPs) in the size range of 5–50 nm. The formation of AuNPs using this polymer matrix allows for the AuNPs to be imbedded in the polymer matrix, once formed. The kinetics of AuNP formation are shown to be pseudo first-order in [HAuCl₄] at room temperature. The kinetics of AuNP formation are controlled by the ratio of reducing agent to HAuCl₄ as well as the overall concentration of the PAH and HAuCl₄. Additionally, at low PAH:HAuCl₄ mole ratios, the plasmon resonance wavelength can be controlled through the ratio of the reactants. This plamson resonance shift is shown to be related to AuNP size by means of TEM imaging data on the AuNPs.     

Room-temperature synthesis of gold nanoparticles and nanoplates using Shewanella algae cell extract

Biosynthesis of spherical gold nanoparticles and gold nanoplates was achieved at room temperature and pH 2.8 when cell extract from the metal-reducing bacterium Shewanella algae was used as both a reducing and shape-controlling agent. Cell extract, prepared by sonicating a suspension of S. algae cells, was capable of reducing 1 mol/m³ aqueous AuCl₄ ⁻ ions into elemental gold within 10 min when H₂ gas was provided as an electron donor. The time interval lapsed since the beginning of the bioreductive reaction was found to be an important factor in controlling the morphology of biogenic gold nanoparticles. After 1 h, there was a large population of well-dispersed, spherical gold nanoparticles with a mean size of 9.6 nm. Gold nanoplates with an edge length of 100 nm appeared after 6 h, and 60% of the total nanoparticle population was due to gold nanoplates with an edge length of 100–200 nm after 24 h. The yield of gold nanoplates prepared with S. algae extract was four times higher than that prepared with resting cells of S. algae. The resulting biogenic gold nanoparticle suspensions showed a large variation in color, ranging from pale pink to purple due to changes in nanoparticle morphology.