Asymmetric d-wave superconducting topological insulator in proximity with a magnetic order

In the framework of the Dirac–Bogoliubov–de Gennes formalism, we investigate the transport properties in the surface of a 3-dimensional topological insulator-based hybrid structure, where the ferromagnetic and superconducting orders are simultaneously induced to the surface states via the proximity effect. The superconductor gap is taken to be spin-singlet d-wave symmetry. The asymmetric role of this gap respect to the electron–hole exchange, in one hand, affects the topological insulator superconducting binding excitations and, on the other hand, gives rise to forming distinct Majorana bound states at the ferromagnet/superconductor interface. We propose a topological insulator N/F/FS junction and proceed to clarify the role of d-wave asymmetry pairing in the resulting subgap and overgap tunneling conductance. The perpendicular component of magnetizations in F and FS regions can be at the parallel and antiparallel configurations leading to capture the experimentally important magnetoresistance (MR) of junction. It is found that the zero-bias conductance is strongly sensitive to the magnitude of magnetization in FS region $m_{zfs}$ and orbital rotated angle α of superconductor gap. The negative MR only occurs in zero orbital rotated angle. This result can pave the way to distinguish the unconventional superconducting state in the relating topological insulator hybrid structures.     

Ferromagnetic barrier-induced negative differential conductance on the surface of a topological insulator

The effect of the negative differential conductance of a ferromagnetic barrier on the surface of a topological insulat（ is theoretically investigated. Due to the changes of the shape and position of the Fermi surfaces in the ferromagnetic barrie the transport processes can be divided into three kinds： the total, partial, and blockade transmission mechanisms. The bias voltage can give rise to the transition of the transport processes from partial to blockade transmission mechanisms, which results in a considerable effect of negative differential conductance. With appropriate structural parameters, the currenl voltage characteristics show that the minimum value of the current can reach to zero in a wide range of the bias voltag and then a large peak-to-valley current ratio can be obtained.     

Spin-plasmons in topological insulator

Collective plasmon excitations in a helical electron liquid on the surface of strong three-dimensional topological insulator are considered. The properties and internal structure of these excitations are studied. Due to spin-momentum locking in helical liquid on a surface of topological insulator, the collective excitations should manifest themselves as coupled charge- and spin-density waves.     

Polymer thin-film transistor based on a high dielectric constant gate insulator

In this paper full polymer thin-film transistors (PTFTs) based on Poly (acrylonitrile) (PAN) as the gate dielectric and poly (2-methoxy-5-(2'-ethyl-hexyloxy)-1,4-phenylene-vinylene) (MEH-PPV) as the semiconductor layer were investigated by using different channel width/length ratios. Relatively high dielectric constant of the polymer dielectric layer (6.27) can remarkably reduce the threshold voltage of the transistors to below -3V. Hole field-effect mobility of MEH-PPV of the PTFTs was about 4.8×10^-4cm²/Vs, and on/off current ratio was larger than 10², which was comparable with that of transistors with widely used Poly (4-vinyl phenol) (PVP) or SiO₂ as gate dielectrics.     

Magnetically confined states and transport property on the surface of a topological insulator

We study the electronic structure and transport for a quasi-one-dimensional channel constructed via two ferromagnetic (FM) stripes on the surface of a three-dimensional (3D) topological insulator (TI) in parallel (P) or antiparallel (AP) magnetization configuration along the vertical z$z$-direction. We demonstrate that the confined states which are localized inside the channel always exist due to the magnetic potential confinement. Interestingly, the channel is metallic because of the existence of a topologically protected gapless chiral edge mode in the case of AP configuration. The asymmetric spatial-distribution of both electron probability density and in-plane spin polarization for the confined states implies that in the case of P configuration there exists a chiral state near the channel edge owing to the Hamiltonian inversion symmetry broken in real space, while the distributions in AP case are always symmetry since the inversion symmetry is still kept. Furthermore, the transmission probability and the spatial-dependent distributions of charge and spin along a narrow–wide–narrow channel on the surface with P configuration confinement are also calculated, from which a fully in-plane spin-polarized electron output is achieved. Along with the mathematical analysis we provide an intuitive, topological understanding of these effects.     

Magneto transport on the surface of a topological insulator spin valve

The effects of the magnetization on the transport properties of a ferromagnet/barrier/ferromagnet spin valve fabricated with a topological insulator are studied. We consider two types of junctions, (i) an F₁/normal barrier (NB)/F₂ junction and (ii) an F₁/magnetic barrier (FB)/F₂ junction. The junctions in both cases lie in the xy-plane with the magnetizations in both ferromagnetic regions, F₁ and F₂ aligned in the z-direction. The charge carriers in the topological insulator have a Dirac like energy spectrum of a massive relativistic particle with the magnetization M playing the role of the mass. The gap opening is a special magneto feature of topological insulators. In an anti parallel alignment of the two magnetizations, the mass of the carriers is negative in the region where M is in the negative direction. The negative mass leads the behaviors of the magneto transport properties and the tunneling magneto resistance of these junctions to be quite different from those of graphene-based spin values.     

Magnetic gap effect on the tunneling conductance in a topological insulator ferromagnet/superconductor junction

The tunneling conductance on the surface of a topological-insulator-based ferromagnet/superconductor (F/S) structure is studied where S is an s-wave superconductor with superconducting order parameter ∼Δ. The conductance is calculated based on the BTK formalism. The magnetization in F is applied along the z-direction () in order to induce the energy-mass gaps (m) for the Dirac electrons in the F-region. In this work, the influence of energy gap due to the magnetic field in the F-region on the conductance is emphasized. The Fermi energy mismatch between F (EFF=EF) and S (EFS=EF+U), where the gate potential U is applied to the electrode on top of S, is also considered. As a result, a biased voltage V can cause the conductance switch at eV=Δ, depending on the value of the magnetic field. The conductance is found to be linearly dependent on either m or U. The slope of the curve can also be adjusted. This linear behavior in a topological-insulator-based F/S structure may be valuable for electronic applications of the linear-control-current devices. The tunneling conductances of the quasi-Dirac-particle in a topological-insulator-based F/S junction are quite different from those of a graphene-based F/S junction.     

Detection of influenza A virus using carbon nanotubes field effect transistor based DNA sensor

The carbon nanotubes field effect transistor (CNTFET) based DNA sensor was developed, in this paper, for detection of influenza A virus DNA. Number of factors that influence the output signal and analytical results were investigated. The initial probe DNA, decides the available DNA strands on CNTs, was 10 µM. The hybridization time for defined single helix was 120 min. The hybridization temperature was set at 30 °C to get a net change in drain current of the DNA sensor without altering properties of any biological compounds. The response time of the DNA sensor was less than one minute with a high reproducibility. In addition, the DNA sensor has a wide linear detection range from 1 pM to 10 nM, and a very low detection limit of 1 pM. Finally, after 7-month storage in 7.4 pH buffer, the output signal of DNA sensor recovered 97%.     

From magnetically doped topological insulator to the quantum anomalous Hall effect

Quantum Hall effect （QHE）, as a class of quantum phenomena that occur in macroscopic scale, is one of the most important topics in condensed matter physics. It has long been expected that QHE may occur without Landau levels so that neither external magnetic field nor high sample mobility is required for its study and application, Such a QHE free of Landau levels, can appear in topological insulators （TIs） with ferromagnetism as the quantized version of the anomalous Hall effect, i.e., quantum anomalous Hall （QAH） effect. Here we review our recent work on experimental realization of the QAH effect in magnetically doped TIs. With molecular beam epitaxy, we prepare thin films of Cr-doped （Bi,Sb）2Te3 TIs with well- controlled chemical potential and long-range ferromagnetic order that can survive the insulating phase. In such thin films, we eventually observed the quantization of the Hall resistance at h/e2 at zero field, accompanied by a considerable drop in the longitudinal resistance. Under a strong magnetic field, the longitudinal resistance vanishes, whereas the Hall resistance remains at the quantized value. The realization of the QAH effect provides a foundation for many other novel quantum phenomena predicted in TIs, and opens a route to practical applications of quantum Hall physics in low-power-consumption electronics.     

Multiple andreev reflections in topological insulator nanoribbons

Superconducting proximity junctions made of topological insulator (TI) nanoribbons (NRs) provide a useful platform for studying topological superconductivity. We report on the fabrication and measurement of Josephson junctions (JJs) using Sb-doped Bi₂Se₃ NRs in contact with Al electrodes. Aharonov–Bohm and Altshuler–Aronov–Spivak oscillations of the axial magneto-conductance of TI NR were observed, indicating the existence of metallic surface states along the circumference of the TI NR. We observed the supercurrent in the TI NR JJ and subharmonic gap structures of the differential conductance due to multiple Andreev reflections. The interface transparency of the TI NR JJs estimated based on the excess current reaches τ = 0.83, which is among the highest values reported for TI JJs. The temperature dependence of critical current is consistent with the short and ballistic junction model confirming the formation of highly transparent superconducting contacts on the TI NR. Our observations would be useful for exploring topological Josephson effects in TI NRs.     

Sizable band gap in organometallic topological insulator

Based on first principle calculation when Ceperley–Alder and Perdew–Burke–Ernzerh type exchange-correlation energy functional were adopted to LSDA and GGA calculation, electronic properties of organometallic honeycomb lattice as a two-dimensional topological insulator was calculated. In the presence of spin–orbit interaction bulk band gap of organometallic lattice with heavy metals such as Au, Hg, Pt and Tl atoms were investigated. Our results show that the organometallic topological insulator which is made of Mercury atom shows the wide bulk band gap of about ∼120 meV. Moreover, by fitting the conduction and valence bands to the band-structure which are produced by Density Functional Theory, spin–orbit interaction parameters were extracted. Based on calculated parameters, gapless edge states within bulk insulating gap are indeed found for finite width strip of two-dimensional organometallic topological insulators.     

Proximity effects in topological insulator heterostructures

Topological insulators （Tls） are bulk insulators that possess robust helical conducting states along their interfaces with conventional insulators. A tremendous research effort has recently been devoted to TI-based heterostructures, in which con- ventional proximity effects give rise to a series of exotic physical phenomena. This paper reviews our recent studies on the potential existence of topological proximity effects at the interface between a topological insulator and a normal insu- lator or other topologically trivial systems. Using first-principles approaches, we have realized the tunability of the vertical location of the topological helical state via intriguing dual-proximity effects. To further elucidate the control parameters of this effect, we have used the graphene-based heterostructures as prototypical systems to reveal a more complete phase diagram. On the application side of the topological helical states, we have presented a catalysis example, where the topo- logical helical state plays an essential role in facilitating surface reactions by serving as an effective electron bath, These discoveries lay the foundation for accurate manipulation of the real space properties of the topological helical state in TI- based heterostructures and pave the way for realization of the salient functionality of topological insulators in future device applications.     

金属-氧化物-半导体场效应管辐射效应模型研究

基于氧化层陷阱电荷以及界面陷阱电荷的产生动力学以及辐射应力损伤的微观机理,推导出了金属-氧化物-半导体场效应管(MOSFET)中辐射应力引起的氧化层陷阱电荷、界面陷阱电荷导致的阈值电压漂移量与辐射剂量之间定量关系的模型. 根据模型可以得到:低剂量情况下,氧化层陷阱电荷与界面陷阱电荷导致的阈值电压漂移量与辐射剂量成正比;高剂量情况下,氧化层陷阱电荷导致的阈值电压漂移量发生饱和, 其峰值与辐射剂量无关,界面陷阱电荷导致的阈值电压漂移量与辐射剂量呈指数关系. 另外,模型还表明氧化层陷阱电荷与界面陷阱电荷在不同的辐射剂量点开始产生饱和现象, 其中界面陷阱电荷先于氧化层陷阱电荷产生饱和现象.最后,用实验验证了该模型的正确性. 该模型可以较为准确地预测辐射应力作用下MOSFET的退化情况.     

Controlling charge current through a DNA based molecular transistor

Molecular electronics is complementary to silicon-based electronics and may induce electronic functions which are difficult to obtain with conventional technology. We have considered a DNA based molecular transistor and study its transport properties. The appropriate DNA sequence as a central chain in molecular transistor and the functional interval for applied voltages is obtained. I–V characteristic diagram shows the rectifier behavior as well as the negative differential resistance phenomenon of DNA transistor. We have observed the nearly periodic behavior in the current flowing through DNA. It is reported that there is a critical gate voltage for each applied bias which above it, the electrical current is always positive.     

Stanene: A good platform for topological insulator and topological superconductor

Two dimensional (2D) topological insulators (TIs) and topological superconductors (TSCs) have been intensively studied for recent years due to their great potential for dissipationless electron transportation and fault-tolerant quantum computing, respectively. Here we focus on stanene, the tin analogue of graphene, to give a brief review of their development as a candidate for both 2D TI and TSC. Stanene is proposed to be a TI with a large gap of 0.3 eV, and its topological properties are sensitive to various factors, e.g., the lattice constants, chemical functionalization and layer thickness, which offer various methods for phase tunning. Experimentally, the inverted gap and edge states are observed recently, which are strong evidences for TI. In addition, stanene is also predicted to be a time reversal invariant TSC by breaking inversion symmetry, supporting helical Majorana edge modes. The layer-dependent superconductivity of stanene is recently confirmed by both transport and scanning tunneling microscopy measurements. This review gives a detailed introduction to stanene and its topological properties and some prospects are also discussed.     

Utilization of surface plasmon resonance of Au/Pt nanoparticles for highly photosensitive ZnO nanorods network based plasmon field effect transistor

Hydrothermally processed highly photosensitive ZnO nanorods based plasmon field effect transistors (PFETs) have been demonstrated utilizing the surface plasmon resonance coupling of Au and Pt nanoparticles at Au/Pt and ZnO interface. A significantly enhanced photocurrent was observed due to the plasmonic effect of the metal nanoparticles (NPs). The Pt coated PFETs showed I_on/I_off ratio more than 3 × 10⁴ under the dark condition, with field-effect mobility of 26 cm² V⁻¹ s⁻¹ and threshold voltage of −2.7 V. Moreover, under the illumination of UV light (λ = 350 nm) the PFET revealed photocurrent gain of 10⁵ under off-state (−5 V) of operation. Additionally, the electrical performance of PFETs was investigated in detail on the basis of charge transfer at metal/ZnO interface. The ZnO nanorods growth temperature was preserved at 110 °C which allowed a low temperature, economical and simple method to develop highly photosensitive ZnO nanorods network based PFETs for large scale production.     

Multiple surface conduction channels via topological insulator and amorphous insulator thin film multi-stacks

Multi-channel Bi₂Se₃ thin films were grown by combining molecular beam epitaxy and atomic layer deposition. High-resolution transmission electron microscope images showed that c-axis oriented Bi₂Se₃ grew on amorphous Al₂O₃ even after multiple stacking. While the surface morphology degraded for the upper layers, each layer was electrically similar. The electrical transport measurements showed that the weak anti-localization effect was quantitatively enhanced upon increasing the number of Bi₂Se₃ channels. Our results provide a promising approach to exploit diverse combinations of layered topological insulator films vertically stacked with amorphous insulator films.     

Transport behaviors and mechanisms in cuspidal blockade region for silicon single-hole transistor

The Si single-hole transistor displays the anomalously-extended cuspidal blockade region, which is elongated toward the 45°-tilted direction normal to gate vs. drain bias voltage regions in the Coulomb blockade diagram. This is attributed to the formation of an ultra small Si quantum dot (QD) into the gate-all-around (GAA) stack. Namely, the large one-electron-addition energy (= 447 meV) from the 2-nm-size Si QD enables the clear Coulomb-blockade events at room temperature, and the large voltage gain from the GAA stack allows the cuspidal extension of the blockade region through the renormalization of Coulomb-blockade energies at the adjacent bias points near the initial Coulomb-blockade state.