Remarkably Enhanced Hydrogen Oxidation Reaction Activity of Carbon-supported Pt by Facile Nickel Modification

Developing high activity catalysts for hydrogen oxidation reaction(HOR)under alkaline condition remains a challenge in the exchange membrane fuel cell(AEMFC).Herein,we report that the activity of carbon-supported platinum(Pt/C)towards the hydrogen oxidation reaction(HOR)in alkaline media can be remarkably enhanced by simple immersion of Pt/C in nickel chloride solution.The adsorption of hydrogen on the catalyst surface is weakened by modification of nickel.The HOR activity on the Pt/C after immersion possesses an excellent mass current density of 33.4 A/gmetal,which is 18%higher than that(28.3 A/gmetal)on Pt/C.     

Enhanced catalytic activity of Ru through N modification toward alkaline hydrogen electrocatalysis

Exploring highly efficient electrocatalysts and understanding the reaction mechanisms for hydrogen electrocatalysis,including hydrogen oxidation reaction （HOR） and hydrogen evolution reaction （HER） in alkaline media are conducive to the conversion of hydrogen energy.Herein,we reported a new strategy to boost the HER/HOR performances of ruthenium （Ru） nanoparticles through nitrogen （N） modification.The obtained N-Ru/C exhibit remarkable catalytic performance,with normalized HOR exchange current d...     

在氢气氧化反应中具有高催化活性的Pt修饰的Ni/C纳米催化剂

随着能源需求的进一步增多和化石能源的大幅度减少,新型环境友好型能源成为近十年许多科研工作者的着力点.其中,燃料电池作为一种高效率、高能量密度、环境友好型能源引起了人们的关注.氢氧燃料电池研究最早、应用最早,具有得天独厚的优势.此外,由于近些年CO2的大量排放,造成了严重的温室效应,其处理也是一个严峻的课题.谢和平课题组提出的CO2矿化发电,不仅可以处理CO2,也可以作为新型能源应用,前景广阔.而不论是氢氧燃料电池还是CO2矿化电池,其阳极反应均为氢气氧化反应(HOR).Pt作为目前仍无法取代的HOR反应催化剂,不仅全球储量有限且价格昂贵,所以,寻找一种价格低廉催化性能好的催化剂成为这些新能源进一步应用的重要课题之一.对此人们进行了大量探索,主要包括尝试不同的载体、改变金属颗粒尺寸形貌等.其中,伽伐尼置换法对于制备纳米核壳结构催化剂以及降低金属颗粒尺寸、增加比表面积均有很大帮助.基于此,本文采用浸渍法和伽伐尼置换法制备了用Pt修饰Ni/C的纳米催化剂,使得纳米级活性金属均匀分散在载体上,加之双金属效应,相对于纯Pt/C催化剂,催化能力提高.浸渍法制得Ni/C前驱体,再将其置于纯乙醇中,用H2PtCl6作为Pt源置换部分Ni,得到Pt修饰的Ni/C催化剂.XRD射线衍射测试结果表明,一般的PtNi合金由于晶格相互影响,只会出现Pt的偏移衍射峰,而该催化剂均出现明显的PtNi两种元素的衍射峰,PtNi晶格互相没有影响.循环伏安法测试结果表明,在Pt-Ni/C系列催化剂中,Pt和Ni含量不同,其电化学活性面积(ECSA)各不相同.在金属总含量一致的前提下,随着Pt含量的增加,催化剂ECSA先增加后减小,最大值为66.90 m2/g,是市售Pt/C(54.12 m2/g)的1.24倍.Tafel测试HOR/HER反应交换电流密度的结果与ECSA结果一致,而Pt-Ni/C催化剂的交换电流密度最高可达485.45 A/g,是市售Pt/C(301.91 A/g)的1.6倍.对性能较好的Pt-Ni/C催化剂进行了表征,X射线光电子能谱结果发现,该催化剂载体上只有少部分Ni的氧化物裸露在表面,大部分为Pt.而透射电镜结果表明,该催化剂纳米级活性金属颗粒尺寸一致,且均匀地分散在载体表面.综合催化剂表征和电化学性能测试结果可知,使用伽伐尼置换法得到的Pt修饰的Ni/C催化剂分散均匀、颗粒尺寸小,且由于Pt作为主要催化活性金属分散于催化剂表面,而Ni作为辅助金属并不直接参与HOR反应,使得该催化剂具有较高的电化学活性.在Pt含量较少时,由于有很多Ni在催化剂表面,且催化层厚度较大,故催化活性一般.随着Pt含量的增加和Ni含量的减少,当催化剂表面只有很少Ni及相关化合物时,由于Pt比表面积大,故活性最高.当Pt含量继续增加时,Pt在Ni表面厚度增加,很多Pt被包裹,故催化活性再次降低.     

Insight into the hydrogen oxidation electrocatalytic performance enhancement on Ni via oxophilic regulation of MoO_2

Exploring platinum-group-metal(PGM)free electrocatalysts for hydrogen oxidation reaction(HOR)in alkaline media is essential to the progress of anion exchange membrane fuel cells(AEMFCs).In this work,a Ni/MoO₂ heterostructure catalyst with comparable HOR activity in alkaline electrolyte with PGM catalyst was prepared by a simple hydrothermal-reduction method.Remarkably,the Ni/MoO₂ presents a mass kinetic current density of 38.5 mA mgNi^-1 at the overpotential of 50 mV,which is higher than that of the best PGM free HOR catalyst reported by far.Moreover,the HOR performance of Ni/MoO₂ under 100 ppm CO shows negligible fading,together with the superior durability,render it significant potential for application in AEMFCs.A particular mechanistic study indicates that the excellent HOR performance is ascribed to the accelerated Volmer step by the incorporation of MoO₂.The function of MoO₂ was further confirmed by CO striping experiment on Pt/C-MoO₂ that MoO₂ can facilitated OH adsorption thus accelerate the HOR process.On account of the high performance and low cost,the Ni/MoO₂ electrocatalyst encourages the establishment of high performance PGM free catalyst and shows significant potential for application in AEMFCs.     

Improved hydrogen oxidation reaction under alkaline conditions by Au–Pt alloy nanoparticles

This work demonstrates the outstanding performance of alloyed Au_1 Pt_1 nanoparticles on hydrogen oxidation reaction(HOR) in alkaline solution. Due to the weakened hydrogen binding energy caused by uniform incorporation of Au, the alloyed Au_1 Pt_1/C nanoparticles exhibit superior HOR activity than commercial Pt Ru/C. On the contrary, the catalytic performance of the phase-segregated Au_2 Pt_1/C and Au_1 Pt_1/C bimetallic nanoparticles in HOR is significantly worse. Moreover, Au_1 Pt_1/C shows a remarkable durability with activity dropping only 4% after 3000 CV cycles, while performance attenuation of commercial Pt Ru/C is high up to 15% under the same condition. Our results indicate that the alloyed Au_1 Pt_1/C is a promising candidate to substitute commercial Pt Ru/C for hydrogen oxidation reaction in alkaline electrolyte.     

The Comparability of Pt to Pt‐Ru in Catalyzing the Hydrogen Oxidation Reaction for Alkaline Polymer Electrolyte Fuel Cells Operated at 80 °C

The Pt‐catalyzed hydrogen oxidation reaction (HOR) for alkaline polymer electrolyte fuel cells (APEFCs) has been one of the focus subjects in current fuel‐cell research. The Pt catalyst is inferior for HOR in alkaline solutions, and alloying with Ru is an effective promotion strategy. APEFCs with Pt‐Ru anodes have provided a performance benchmark over 1 W cm^?2 at 60 °C. The Pt anode is now found to be in fact as good as the Pt‐Ru anode for APEFCs operated at elevated conditions. At 80 °C with appropriate gas back‐pressure, the cell with a Pt anode exhibits a peak power density of about 1.9 W cm^?2, which is very close to that with a Pt‐Ru anode. Even by decreasing the anode Pt loading to 0.1 mg cm^?2, over 1.5 W cm^?2 can still be achieved at 80 °C. This finding alters the previous understanding about the Pt catalyzed HOR in alkaline media and casts a new light on the development of practical and high‐power APFEC technology.     

A rotating disk electrode study of the particle size effects of Pt for the hydrogen oxidation reaction

By using a catalyst-lean thin-film RDE method, the fast kinetics of the hydrogen oxidation reaction (HOR) on highly dispersed Pt nanoparticle electrocatalysts can be determined, free from the interference of the mass transport of H(2) molecules in solution. Measurements with carbon-supported Pt nanoparticles of different sizes thus allow revealing the particle size effect of Pt for the HOR. It is shown that there is a "negative" particle size effect of Pt on the kinetics of HOR, i.e., the exchange current density j(0) decreases with the increased dispersion (i.e. decreased mean particle size). A maximum mass activity of Pt for the HOR is found at particle sizes of 3-3.5 nm. The observed particle size effect is interpreted in terms of the size dependent distribution of surface atoms on the facets and edges, which is implied by the voltammetric responses of Pt/C catalysts with differently sized Pt particles. The accompanied decrease in the HOR activity with the increase in the edge atom fraction suggests that the edge atoms on the surface of Pt nanoparticles are less active for the HOR than those on the facets.     

Enhanced Electrocatalytic Hydrogen Oxidation on Ni/NiO/C Derived from a Nickel‐Based Metal–Organic Framework

The sluggish hydrogen oxidation reaction (HOR) under alkaline conditions has hindered the commercialization of hydroxide‐exchange membrane hydrogen fuel cells. A low‐cost Ni/NiO/C catalyst with abundant Ni/NiO interfacial sites was developed as a competent HOR electrocatalyst in alkaline media. Ni/NiO/C exhibits an HOR activity one order of magnitude higher than that of its parent Ni/C counterpart. Moreover, Ni/NiO/C also shows better stability and CO tolerance than commercial Pt/C in alkaline media, which renders it a very promising HOR electrocatalyst for hydrogen fuel cell applications. Density functional theory (DFT) calculations were also performed to shed light on the enhanced HOR performance of Ni/NiO/C; the DFT results indicate that both hydrogen and hydroxide achieve optimal binding energies at the Ni/NiO interface, resulting from the balanced electronic and oxophilic effects at the Ni/NiO interface.     

Durable High-Temperature Proton Exchange Membrane Fuel Cells Enabled by the Working-Temperature-Matching Palladium-Hydrogen Buffer Layer

The durability degradation during stack-operating conditions seriously deteriorates the lifetime and performance of the fuel cell. To alleviate the rapid potential rise and performance degradation, an anode design is proposed to match the working temperature of high-temperature proton exchange membrane fuel cells (HT-PEMFCs) with the release temperature of hydrogen from palladium. The result is significantly enhanced hydrogen oxidation reaction (HOR) activity of Pd and superior performance of the Pd anode. Furthermore, Pd as hydrogen buffer and oxygen absorbent layer in the anode can provide additional in situ hydrogen and absorb infiltrated oxygen during local fuel starvation to maintain HOR and suppress reverse-current degradation. Compared with the traditional Pt/C anode, the Pd/C also greatly improved HT-PEMFCs durability during start-up/shut-down and current mutation. The storage/release of hydrogen provides innovative guidance for improving the durability of PEMFCs.     

Experimental Proof of the Bifunctional Mechanism for the Hydrogen Oxidation in Alkaline Media

Realization of the hydrogen economy relies on effective hydrogen production, storage, and utilization. The slow kinetics of hydrogen evolution and oxidation reaction (HER/HOR) in alkaline media limits many practical applications involving hydrogen generation and utilization, and how to overcome this fundamental limitation remains debatable. Here we present a kinetic study of the HOR on representative catalytic systems in alkaline media. Electrochemical measurements show that the HOR rate of Pt‐Ru/C and Ru/C systems is decoupled to their hydrogen binding energy (HBE), challenging the current prevailing HBE mechanism. The alternative bifunctional mechanism is verified by combined electrochemical and in situ spectroscopic data, which provide convincing evidence for the presence of hydroxy groups on surface Ru sites in the HOR potential region and its key role in promoting the rate‐determining Volmer step. The conclusion presents important references for design and selection of HOR catalysts.     

The Role of Discrepant Reactive Intermediates on Ru-Ru2P Heterostructure for pH-Universal Hydrogen Oxidation Reaction

Developing highly efficient electrocatalysts for hydrogen oxidation reaction (HOR) under alkaline media is essential for the commercialization of alkaline exchange membrane fuel cell (AEMFC). However, the kinetics of HOR in alkaline media is complicated, resulting in orders of magnitude slower than that in acid, even for the state-of-the-art Pt/C. Here, we find that Ru-Ru₂P/C heterostructure shows HOR performance with a non-monotonous variation in a whole pH region. Unexpectedly, an inflection point located at pH≈7 is observed, showing an anomalous behavior that HOR activity under alkaline media surpasses acidic media. Combining experimental results and theoretical calculations, we propose the roles of discrepant reactive intermediates for pH-universal HOR, while H* and H₂O* adsorption strengths are responsible for acidic HOR, and OH* adsorption strength is essential for alkaline HOR. This work not only sheds light on fundamentally understanding the mechanism of HOR but also provides new designing principles for pH-targeted electrocatalysts.     

Ni3N as an Active Hydrogen Oxidation Reaction Catalyst in Alkaline Medium

Hydroxide‐exchange membrane fuel cells can potentially utilize platinum‐group‐metal (PGM)‐free electrocatalysts, offering cost and scalability advantages over more developed proton‐exchange membrane fuel cells. However, there is a lack of non‐precious electrocatalysts that are active and stable for the hydrogen oxidation reaction (HOR) relevant to hydroxide‐exchange membrane fuel cells. Here we report the discovery and development of Ni₃N as an active and robust HOR catalyst in alkaline medium. A supported version of the catalyst, Ni₃N/C, exhibits by far the highest mass activity and break‐down potential for a PGM‐free catalyst. The catalyst also exhibits Pt‐like activity for hydrogen evolution reaction (HER) in alkaline medium. Spectroscopy data reveal a downshift of the Ni d band going from Ni to Ni₃N and interfacial charge transfer from Ni₃N to the carbon support. These properties weaken the binding energy of hydrogen and oxygen species, resulting in remarkable HOR activity and stability.     

A passive microfluidic hydrogen-air fuel cell with exceptional stability and high performance

We describe an advanced microfluidic hydrogen-air fuel cell (FC) that exhibits exceptional durability and high performance, most notably yielding stable output power (>100 days) without the use of an anode-cathode separator membrane. This FC embraces an entirely passive device architecture and, unlike conventional microfluidic designs that exploit laminar hydrodynamics, no external pumps are used to sustain or localize the reagent flow fields. The devices incorporate high surface area/porous metal and metal alloy electrodes that are embedded and fully immersed in liquid electrolyte confined in the channels of a poly(dimethylsiloxane) (PDMS)-based microfluidic network. The polymeric network also serves as a self-supporting membrane through which oxygen and hydrogen are supplied to the cathode and alloy anode, respectively, by permeation. The operational stability of the device and its performance is strongly dependent on the nature of the electrolyte used (5 M H2SO4 or 2.5 M NaOH) and composition of the anode material. The latter choice is optimized to decrease the sensitivity of the system to oxygen cross-over while still maintaining high activity towards the hydrogen oxidation reaction (HOR). Three types of high surface area anodes were tested in this work. These include: high-surface area electrodeposited Pt (Pt); high-surface area electrodeposited Pd (Pd); and thin palladium adlayers supported on a "porous" Pt electrode (Pd/Pt). The FCs display their best performance in 5 M H2SO4 using the Pd/Pt anode. This exceptional stability and performance was ascribed to several factors, namely: the high permeabilities of O2, H2, and CO2 in PDMS; the inhibition of the formation of insoluble carbonate species due to the presence of a highly acidic electrolyte; and the selectivity of the Pd/Pt anode toward the HOR. The stability of the device for long-term operation was modeled using a stack of three FCs as a power supply for a portable display that otherwise uses a 3 V battery.     

Temperature dependence of CO-tolerant hydrogen oxidation reaction activity at Pt, Pt-Co, and Pt-Ru electrodes

The temperature dependence of CO-tolerant H2 oxidation reaction (HOR) activity at Pt, Pt-Co, and Pt-Ru electrodes in 0.1 M HClO4 solution was examined with a channel flow electrode at 30 to 90 degrees C. The kinetically controlled current density (j(K)) for the HOR at Pt decreased seriously at CO overage (theta(CO)) >0.6 in the whole temperature range examined. In contrast, the Pt-Ru alloy exhibited an excellent CO tolerance: only 15% reduction in j(K) even at theta(CO) = 0.6 and 30 degrees C. The Pt-Co alloy also showed moderate CO tolerance up to 70 degrees C. It was found for these alloys that the CO adsorption rate was much slower than that of Pt and the HOR sites were not so rigidly blocked by adsorbed CO due to its enhanced mobility, resulting from their modified electronic structure of surface Pt sites. The activation energies for the apparent rate constants for the HOR were as low as 3.0 and 5.3 kJ mol(-1) at Pt and Pt-Ru, respectively, indicating that the high-temperature operation increases CO-free HOR sites as well as enhancing the HOR kinetics.     

Pb-Modified Ultrathin RuCu Nanoflowers for Active,Stable, and CO-resistant Alkaline Electrocatalytic Hydrogen Oxidation

CO poisoning of Pt group metal (PGM) catalysts is a chronic problem for hydrogen oxidation reaction (HOR), the anodic reaction of hydroxide exchange membrane fuel cell (HEMFC) for converting H₂ to electric energy in sustainable manner. We demonstrate here an ultrathin Ru-based nanoflower modified with Pb (PbRuCu NF) as an active, stable, and CO-resistant catalyst for alkaline HOR. Mechanism studies show that the presence of Pb can weaken the adsorption of *H, strengthen *OH adsorption to facilitate CO oxidation, as a result of significantly enhanced HOR activity and improved CO tolerance. Furthermore, in situ electrochemical attenuated total reflection surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS) suggests that Pb acts as oxygen-rich site to regulate the behavior of the linear CO adsorption. The optimized Pb_1.04-Ru₉₂Cu₈/C displays a mass activity and specific activity of 1.10 A mg_Ru⁻¹ and 5.55 mA cm⁻², which are ≈10 and ≈31 times higher than those of commercial Pt/C. This work provides a facile strategy for the design of Ru-based catalyst with high activity and strong CO-resistance for alkaline HOR, which may promote the fundamental researches on the rational design of functional catalysts.     

Br?nsted酸性离子液体活化电极催化制氢性能研究

分别采用玻碳( GC)、铂( Pt)和金( Au)电极研究了在Br?nsted酸性离子液体[ HMIm] HSO4中电解水制氢的催化活性,活性大小为Pt > Au >> GC。水中离子液体的含量对析氢电流影响很大,当[ HMIm] HSO4含量为30%(V/V)时,Pt电极催化电解水产氢的阈值电位高达-0.3 V (Ag丝为准参比电极, Ag QRE),在-0.5 V (Ag QRE)处电流密度高达110.52 mA/cm2,为相同条件下Au电极的15倍,GC电极的650倍。计算结果表明,Pt电极在该电解液中的反应活化能为5.68 kJ/mol。电极的高催化活性与[ HMIm] HSO4电离产生的质子有关,使水以H3 O+的形式捕集电子,效率更高。     

A Pd/C‐CeO2 Anode Catalyst for High‐Performance Platinum‐Free Anion Exchange Membrane Fuel Cells

One of the biggest obstacles to the dissemination of fuel cells is their cost, a large part of which is due to platinum (Pt) electrocatalysts. Complete removal of Pt is a difficult if not impossible task for proton exchange membrane fuel cells (PEM‐FCs). The anion exchange membrane fuel cell (AEM‐FC) has long been proposed as a solution as non‐Pt metals may be employed. Despite this, few examples of Pt‐free AEM‐FCs have been demonstrated with modest power output. The main obstacle preventing the realization of a high power density Pt‐free AEM‐FC is sluggish hydrogen oxidation (HOR) kinetics of the anode catalyst. Here we describe a Pt‐free AEM‐FC that employs a mixed carbon‐CeO₂ supported palladium (Pd) anode catalyst that exhibits enhanced kinetics for the HOR. AEM‐FC tests run on dry H₂ and pure air show peak power densities of more than 500 mW cm^?2.     

Improved Nafion-based amperometric sensor for hydrogen in argon

An improved polymer electrolyte membrane fuel cell-based amperometric hydrogen sensor has been developed. The sensor operates at room temperature, and the electrolyte used in the sensor is Nafion which is a proton-conducting solid polymer electrolyte. Platinum black is used as both anode and cathode. The sensor functions as a fuel cell, H₂/Pt//Nafion//Pt/O₂, and a mechanical barrier limits the supply of hydrogen to the sensing side electrode. The limiting current is found to be linearly related to the hydrogen concentration. The sensor can be used to measure hydrogen in argon in parts per million and percentage levels. The basic principle, details of assembly, and response behavior of the sensor are discussed.     

Transient observation of H labeled species in an operating PEFC using neutron radiography

High resolution neutron radiography was used to observe the time resolved distribution of ²H nuclei in the membrane of an operating polymer electrolyte fuel cell (PEFC) after changing the anode gas from ¹H₂ to ²H₂. The rate of replacement and the distribution of ²H nuclei shortly after the change of the anode gas were found to be independent of the applied current density. This behavior can be explained by a high exchange current density of the hydrogen oxidation reaction (HOR), the uptake of ²H nuclei in the membrane being limited by diffusive transport. A simple calculation as well as qualitative analysis is given to support this explanation.     

Single‐Molecule Nanocatalysis Shows In Situ Deactivation of Pt/C Electrocatalysts during the Hydrogen‐Oxidation Reaction

By coupling a Pt‐catalyzed fluorogenic reaction with the Pt‐electrocatalyzed hydrogen‐oxidation reaction (HOR), we combine single‐molecule fluorescence microscopy with traditional electrochemical methods to study the real‐time deactivation kinetics of a Pt/C electrocatalyst at single‐particle level during electrocatalytic hydrogen‐oxidation reaction. The decay of the catalytic performance of Pt/C could be mainly attributed to the electrocatalysis‐induced etching or dissolution of Pt nanoparticles. Spontaneous regeneration of activity and incubation period of the Pt electrocatalyst were also observed at single‐particle level. All these new insights are practically useful for the understanding and rational design of highly efficient electrocatalysts for application in fuel cells.