微波辅助4-十二烷氧基苄胺保护的憎水性纳米金原位还原合成

利用新型表面活性剂4-十二烷氧基苄胺(C₁₂OBA)构成的C₁₂OBA/正庚烷/正丁醇/HAuCl₄/NaOH(aq.) W/O型微乳液作为微反应器, 通过微波辐射加热的正丁醇原位还原法制备了C₁₂OBA包裹的憎水性金纳米粒子, 并通过紫外可见光谱(UV-vis)、透射电镜(TEM)、X射线衍射(XRD)、红外光谱(FT-IR)和接触角(CA)等分别进行了表征和分析. 结果显示, C₁₂OBA既可参与形成稳定的W/O型微乳液, 又可作为金粒子的良好保护剂. 微乳液内核中碱度的增加能增强位于膜相的正丁醇分子的还原能力. 在固定氯金酸用量时, C₁₂OBA/金的物质的量比增加有利于获得小尺寸、高单分散性的憎水性纳米金颗粒, 而体系的极性增加则导致金粒子的尺寸增大、单分散性下降. 通过本实验方法可方便快速地合成尺寸约为5 nm的具有高度单分散的憎水性金纳米粒子.     

局域表面等离子体共振辅助的金纳米棒/聚合物纳米复合材料的双光子聚合

本文研究了金纳米棒的局域表面等离子体共振效应在双光子聚合过程中的作用,即当激发光与金纳米棒表面等离子体共振波长相匹配时,会在金纳米棒表面产生很强的局域电磁场,从而引发双光子聚合。通过采用与金纳米棒表面等离子体共振波长相同的飞秒激光,在低于光刻胶聚合阈值的功率下照射含有金纳米棒的光刻胶,制备聚合物包覆金纳米棒的纳米复合材料。透射电子显微镜结果表明,当飞秒激光功率为0.6 W、光斑直径为1.6 cm、照射时间为0.3 s时,金纳米棒表面成功聚合上厚度为5 nm左右的聚合物。本研究在制备聚合物/金属纳米粒子方面提供了一种简单可行的方法,有望在纳米光子学、纳米传感器等新兴领域得到应用。     

Microindentation Hardness of Nanostructured Thermoplastic Materials

Summary: The micromechanical behaviour of various thermoplastics based nanocomposites was investigated with the aid of the microindentation technique. The materials studied were microphase separated styrene-butadiene block copolymer systems and several thermoplastics reinforced with nano-sized fillers having variable dimensionality. It was found that the microhardness behaviour of the nanocomposites studied was strongly influenced by the dimensionalities of the filler. Due to large surface to volume-ratio one- and two-dimensional fillers exhibit a far better reinforcing behaviour than the three dimensional ones. In case of nanostructured block copolymers, the microhardness is not determined by the total polystyrene (PS)/polybutadiene (PB) composition alone but diminishes gradually in presence of freely standing dangling polybutadiene chains even if the morphology of the systems remains unaltered.     

Gold Catalysis: In Situ EXAFS Study of Homogeneous Oxidative Esterification

Gold complexes were prepared and investigated as catalysts for the oxidative esterification of aldehydes. Stabilisation by pyridine ligands gave good conversions and the in situ extended X‐ray absorption fine structure (EXAFS) study of the reactions indicated that the reaction mixtures contained only mononuclear gold species. Thus, this is the first proof for a homogeneous gold‐catalysed oxidation reaction; the presence of nanoparticles could be excluded experimentally.     

Dendronized Gelatin-Mediated Synthesis of Gold Nanoparticles

Thermoresponsive dendronized gelatins (GelG1) or gelatin methacrylates (GelG1MA) were used as precursors to modulate the efficient reduction of Au(III) to form stable gold nanoparticles (AuNPs) through UV irradiation. These dendronized gelatins were obtained through the amidation of gelatin or gelatin methacrylates with dendritic oligoethylene glycols (OEGs). Crowded OEG dendrons along the gelatin backbones create a hydrophobic microenvironment, which promotes the reduction of Au(III). Gelatin backbones act as ligands through the electron-rich groups to facilitate the reduction, while the dendritic OEGs provide shielding effects through crowding to form a hydrophobic microenvironment, which not only enhances the reduction but also stabilize the formed AuNPs through encapsulation. The effects of dendron coverage on the dendronized biomacromolecules and their thermoresponsiveness on the reduction kinetics were examined. Dendronized gelatin/AuNPs hydrogels were further prepared through the in situ photo-crosslinking of GelG1MA. The modification of natural macromolecules through dendronization presented in this report facilitates a novel platform for the environmentally friendly synthesis of noble metal nanoparticles, which may form a new strategy for developing smart nano-biosensors and nano-devices.     

基于金纳米棒的核壳纳米结构及其光学性质研究

以金纳米棒为核的核壳结构纳米粒子由于它独特的光学性质、结构特点以及在催化、表面增强拉曼散射方面的应用前景,成为目前纳米材料研究的热点之一。本文重点介绍以金纳米棒为核,包覆其他无机材料的核/壳结构之合成方法,同时阐述其结构特征、光学性质以及外界条件对结构和性质的影响。其中,由于金银纳米核壳结构的研究开始最早,研究最为深入,故对其进行重点阐述。最后对以金纳米棒为核的核壳结构未来研究进行了展望。     

In Situ Formation of Dual‐Phase Thermosensitive Ultrasmall Gold Nanoparticles

A novel method for the in situ synthesis of dual‐phase thermosensitive ultrasmall gold nanoparticles (USGNPs) with diameters in the range of 1–3 nm was developed by using poly(N‐isopropylacrylamide)‐block‐poly(N‐phenylethylenediamine methacrylamide) (PNIPAM‐b‐PNPEDMA) amphiphilic diblock copolymers as ligands. The PNPEDMA block promotes the in situ reduction of gold precursors to zero‐valent gold and subsequently binds to the surface of gold nanoparticles, while PNIPAM acts as a stabilizing and thermosensitive block. The as‐synthesized USGNPs stabilized by a thermosensitive PNIPAM layer exhibit a sharp, reversible, clear–opaque transition in aqueous solution between 30 and 38 °C. An unprecedented finding is that these USGNPs also show a reversible soluble–precipitate transition in nonpolar organic solvents such as chloroform at around 0 °C under acidic conditions.     

Fast Optical Healing of Crystalline Polymers Enabled by Gold Nanoparticles

A general method for very fast and efficient optical healing of crystalline polymers is reported. By loading a very small amount of gold nanoparticles (AuNPs) in either poly(ethylene oxide) (T_m ≈ 63 °C) or low‐density polyethylene (T_m ≈ 103 °C), the heat released upon surface plasmon resonance (SPR) absorption of 532 nm light by AuNPs can melt crystallites in the interfacial region of two polymer pieces brought into contact; and the subsequent recrystallization of polymer chains on cooling merges the two pieces into one. The fracture strength of such repaired sample can reach the level of the undamaged polymer after 10 s laser exposure. Moreover, in addition to an ability of long‐distance remote and spatially selective healing, the optical method also works for polymer samples immersed in water.

     

苯乙炔吸附在金电极上的现场表面增强拉曼光谱研究

采用电化学现场表面增强拉曼光谱研究了苯乙炔在金电极上的吸附行为及表面反应过程. 负电位下拉曼光谱的变化表明, 苯乙炔分子的炔端碳与金属电极成键, 分子垂直吸附于金电极表面. 在所研究的负电位区间内, 分子在电极表面的吸附取向并未随电位发生改变. 电化学现场光谱研究表明, 苯乙炔分子随电位负移, 碳碳叁键被加氢还原. 通过对比苯乙烯的现场表面增强拉曼光谱发现, 在－0.6 V至－1.2 V的电位区间内, 苯乙炔经过中间步骤生成苯乙烯, 最终被完全加氢为苯乙烷.     

Amine‐Functionalized Polyglycidyl Methacrylate Microsphere as a Unified Template for the Synthesis of Gold Nanoparticles and Single‐Crystal Gold Plates

Polyglycidyl methacrylate (PGMA) microspheres, crosslinked and surface‐functionalized by amine, can be used as a solid‐state template for the synthesis of gold (Au) crystals in the forms of either nanoparticles (NPs) or plates. It is discovered that the polymer microsphere acts as an internal template to cultivate Au NPs inside the microsphere or an external template to generate the single‐crystal plates depending on the critical concentration (C_cr) of gold ions. The ion–dipole interaction and the structure‐dependent solubility of gold induce two distinct gold nanostructures in the presence of the functionalized polymer microspheres. The catalytic activity and long‐term storage of the developed gold nanostructures that can be easily scaled‐up for mass production through the developed novel methodology is demonstrated.     

Colorimetric Enzyme Sensing Assays via In Situ Synthesis of Gold Nanoparticles

We report a successful facile and novel approach for in situ synthesis of gold nanoparticles (AuNPs) via enzymatic dephosphorylation reaction at room temperature. Fmoc-tyrosine phosphate and cytidine-5-mono phosphate are used to sense the activities of an enzyme alkaline phosphatase. Formation of AuNps is highly selective towards biomolecules and it is readily detected colorimetrically and UV–Vis analysis. In this procedure, dephosphorylated product plays both roles as reducing and stabilizing agent to direct the formation of AuNPs in aqueous media. Transmission electron microscopic study reveales that hexagonal AuNPs were synthesized by using Fmoc-tyrosine phosphate and alkaline phosphatase. Wide angle X-ray scattering data confirms the formation of AuNPs. FT-IR studies confirm that biomolecules play crucial role to stabilize the AuNPs by molecular interactions with the surface of AuNPs. In situ synthesized AuNPs are applied for the sensing of enzyme activity.     

Mechanism of Gold Activation in Supported Gold Catalysts for CO Oxidation

Based on the structure of characterization of Au/Fe₂O₃ catalysts, the mechanism of gold activation in supported gold catalysts was proposed as follow:

Synthesis of gold/polydopamine composite surfaces on glass substrates for localized surface plasmon resonance and catalysis

Composite materials of polydopamine (PDA) and gold nanoparticles on glass substrates (Au/PDA@slide) were obtained via a simple chemical process. First, PDA films (PDA@slide) were formed by immersing slides in 20 mg ml⁻¹ dopamine aqueous solution at pH = 8.5 for 1 h. Then, PDA@slide was dipped in 0.02 M chloroauric acid (HAuCl₄) aqueous solution for a certain time, Au/PDA@slide being formed. Gold nanoparticles were obtained by the reductive properties of PDA. The morphology and chemical composition of the composite material were characterized using scanning electron microscopy, X‐ray diffraction and X‐ray photoelectron spectroscopy. The catalytic properties of Au/PDA@slide were evaluated using the reduction of 4‐nitrophenol (4‐NP) in the presence of sodium borohydride (NaBH₄) aqueous solution at room temperature. The catalytic activity of the optimal Au/PDA@slide was so satisfactory that the reduction of 4‐NP was completed within 10 min. Moreover, the Au/PDA@slide composite material was stable up to five cycles without significant loss of its catalytic activity. In addition, Au/PDA@slide also exhibited photocatalytic ability, photodegrading 2.5 ml of 17.5 mg l⁻¹ methyl orange in 100 min. By measuring the UV–visible absorption bands of Au/PDA@slide, it was proved that the condition of the strongest surface plasmon resonance of Au/PDA@slide was the optimal condition for catalytic reduction of 4‐NP.     

In Situ Spectroscopic Analysis of Nanocluster Formation

The importance of small metal clusters in catalysis and the problems in understanding the clustering process in solution are outlined. A new analysis method for UV/Vis spectra is presented and applied to monitor the kinetics of ion reduction and cluster formation in situ. This method, which is based on a combination of two chemometric techniques, takes into account the entire UV/Vis spectrum and offers better interpretation possibilities than the traditional “band‐assignment” approach. This is particularly true for nanoclusters because these have significant spectral contributions also outside the broad plasmon band that is usually associated with them. The reduction of palladium, gold, and silver ions and the formation of the corresponding clusters is monitored in the presence of two different reducing agents, sodium borohydride and tetraoctylammonium acetate. While Pd²⁺ is found to reduce and cluster directly, the spectral decomposition of the Au³⁺ reduction profiles shows two species corresponding to the Au⁺ intermediate and the Au⁰ clusters. The rates of reduction and clustering for Pd, Au, and Ag are compared and the possibilities of synthesising multimetallic clusters of these metals by coreduction are discussed.     

Synthesis and characterization of magnetoelectric polymer nanocomposites

Magnetoelectric polymer nanocomposite structures are synthesized using conducting polyaniline and nanosized BFO particles through in situ sol–gel polymerization. The effect of nanosized BFO in polyaniline matrix is studied. The SEM, XRD, VSM, FTIR, and UV–Vis studies were made to understand the morphology, crystalline structure, magnetic, and optical properties of PANI/BFO composites with various concentrations of nanofiller. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2418–2422, 2008     

Fluorescent Gold Nanoparticles: Synthesis of Composite Materials of Two‐Component Disulfide Gels and Gold Nanoparticles

Pseudoenantiomeric ethynylhelicene oligomers containing a disulfide group formed two‐component gels, which showed different solvent properties from gels without the disulfide group. The disulfide gels reacted with gold nanoparticles, and the resulting organic–inorganic composite materials exhibited fluorescence emission between 600–800 nm, along with emission from the oligomers at 450 nm. The disulfide gels and isolated gold nanoparticles loaded with the oligomers did not show the former emission. The 600–800 nm emission reversibly disappeared upon sol formation with heating, which was accompanied by an enhancement of the emission at 450 nm. The novel emission was also observed in the solid state.     

Synthesis and characterization of cross‐linkable ruthenium complex dye and its application on dye‐sensitized solar cells

A new crosslinkable light sensitizer, Ru(2,2′‐bipyridine‐4,4′‐bicarboxylic acid)(4,4′‐bis(11‐dodecenyl)‐2,2′‐bipyridine)(NCS)₂, denoted as Ru‐C for titanium oxide nanocrystalline‐based solar cells was synthesized with its crosslinking properties invesitigated by Fourier‐transform infrared and UV‐vis absorption spectroscopies. After crosslinking by itself or copolymerizing with methyacrylic acid, their sensitized solar cells with poly(methylacrylate)‐gelled electrolyte system not only attained more than 5% of power conversion efficiency at AM 1.5 illumination (100 mW/cm²), but also gave rise to long storage life. To the best our knowledge, this is the first crosslinkable dye ever applied to the DSSC in the literature. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 366–372, 2010