Sorption of Pollutant Traces by Nanoporous Crystalline Aerogels: Visualization by a Dye

Summary: The influence of the crystalline structure on the pollutant sorption properties of high porosity syndiotactic polystyrene (sPS) aerogels has been made visible by using azulene, a blue dye, capable to form a clathrate phase with sPS. The bluish coloration observed for aerogels with the nanoporous δ-form and the absence of coloration for aerogels with the densely-packed γ-form clearly establish that the crystalline nanopores play a key role for the removal of pollutant traces from water or air.     

Blends of organosilicon polymers with polystyrene and poly(2,6-dimethyl-1,4-phenylene oxide)

Blends of organosilicon polymers with polystyrene, PS, and poly(2,6-dimethyl-1,4-phenylene oxide), PPE, were investigated by transmission electron microscopy and differencial scanning calorimetry. Blends with poly(tetramethylsilphenylenesiloxane), PTMPS, showed a morphology characterized by globular domains dispersed in the organic matrix. An apparent homogeneous system was observed when poly(dimethylsilphenylene), PDSP, was mixed with PPE. A crystalline phase was found in samples with a higher PDSP content. The morphology of PS/PDSP blends with low PDSP content showed a dendritic phase dispersed in the PS-rich matrix. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 2609–2616, 1997     

Molecular relaxation in the blends of polystyrene/poly(2,6-dimethyl-1,4-phenylene oxide) at low temperature

Molecular relaxation behavior in terms of the α, β, and γ transitions of miscible PS/PPO blends has been studied by means of DMTA and preliminary work has been carried out using DSC. From DSC and DMTA (by tan δ), the observed α relaxation (T_α or T_g) of PS, PPO, and the blends, which are intermediate between the constituents, are in good agreement with earlier reports by others. In addition, the β transition (T_β) of PS at 0.03 Hz and 1 Hz is observed at −30 and 20°C, respectively, while the γ relaxation (T_γ) is not observed at either frequency. The T_β of PPO is 30°C at 0.03 Hz and is not observed at 1 Hz, while the T_γ is −85°C at 0.03 Hz and −70°C at 1 Hz. On the other hand, blend composition-independent β or γ relaxation observed in the blends may be a consequence of the absence of intra- or intermolecular interaction between the constituents at low temperature. Thus it is suggested that at low temperature, the β relaxation of PS be influenced solely by the local motion of the phenylene ring, and that the β or γ relaxation of PPO be predominated by the local cooperative motions of several monomer units or the rotational motion of the methyl group in PPO. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 1981–1986, 1998     

Occurrence of Both Sinusoidal and Zigzag Supermolecular Structures Associated with Band Textures in a Liquid Crystalline Polymer

Band textures are observed in a precipitation film from a presheared poly(1,4-phenylene terephthalamide) solution, a typical lyotropic main-chain polymeric liquid crystal. By polarized optical microscopy (POM) studies and in the same specimen system, both sinusoidal and zigzag supermolecular structures associated with band textures are found, according to the comparison between the experimental micrographs and the theoretical birefringence patterns. As a consequence, the present paper describes how to distinguish these two supermolecular structures merely by POM and demonstrates that both structure models are reasonable. © 1997 John Wiley & Sons, Ltd.     

Electrochemical stability and transformations of fluorinated poly(2,6-dimethyl-1,4-phenylene oxide)

Fluorination of poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) leads to narrowing of its window of electrochemical stability in a cathodic range of potentials. It is found this is connected with appearance of both perfluorinated and incompletely fluorinated units in the polymer. The former units are liable to electrochemical reduction (at potentials <−2.0 V) followed by elimination of fluorine anions and the latter react with basic products (generated at potentials <−1.8 V) of electrochemical reduction of the background solution. In the both cases this results in appearance of conjugated multiple bonds in the fluorinated macromolecules. Quantities of these units in fluorinated PPO were determined with a help of direct and indirect electrochemical reductive degradation techniques.     

Miscible blends of zinc-neutralized sulfonated polystyrene and poly(2,6-dimethyl 1,4-phenylene oxide)

Zinc-neutralized sulfonated polystyrene ionomers (ZnSPS) and poly(2,6-dimethyl 1,4-phenylene oxide) homopolymer (PXE) form miscible blends up to at least 7.8 mol % sulfonation, as measured by thermal and mechanical criteria. The addition of an equal weight of PXE raises the glass transition temperature of ZnSPS by 40–50°C. However, this miscibility is not achieved by eradicating the microdomain structure present in ZnSPS, even though the PXE coils are considerably larger than the spacings between ionic aggregates. Small-angle x-ray scattering indicates that while the average interaggregate spacing is roughly the same in ZnSPS and its 50/50 blend with PXE at a given sulfonation level, the extent of phase separation is reduced upon PXE addition, indicating that more ionic groups are dispersed in the matrix. Factors influencing miscibility in the ZnSPS/PXE materials and related blends are discussed.     

Chemical modification of poly(2,6-dimethyl-1,4-phenylene oxide) by bromination-alkynylation

The chemical modification of poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) by bromination of the aromatic ring, followed by displacement of bromine with substituted acetylenes, has been investigated. This pathway leads to a series of novel copolymers containing substituted alkynes on the aromatic ring. The degree of bromination and alkynylation, determined by ¹H-NMR, was in the range of 20–85 and 15–80%, respectively. ¹³C-NMR and FT-IR unambiguously elucidated the structure of the alkynylated polymers. Finally, thermal properties and permeation properties of substituted PPO to carbon dioxide, methane, oxygen, and nitrogen are reported. © 1994 John Wiley & Sons, Inc.     

Model reactions for preparing poly(imino-tetrafluoro-1,4-phenylene)

2,3,4,5,6-Pentafluoroformanilide was prepared giving, in addition, two new compounds 4,5,6,7-tetrafluoro-1-pentafluorophenyl-benzimidazole and 2,3,4,5-tetrafluoro-6-[(pentafluorophenyl)amino]formanilide. Sodium 2,3,4,5,6-pentafluoro-formanilide was reacted with hexafluorobenzene in a molar ratio of 1:4 to give oligomers of α-pentafluorophenyl-ω-fluoro-poly(imino-tetrafluoro-1,4-phenylene). Some of the oligomers were isolated. The results indicate that poly(imino-tetrafluoro-1,4-phenylene) could be formed. Model reaction on hexafluorobenzene with sodium acetanilide, molar ratio 1:2, gave a low yield of N,N′-diacetyl-diphenyl-tetrafluoro-1,4-phenylenediamine.     

OXIDATIVE POLYMERIZATION BEHAVIOR OF 2,6-DIMETHYLPHENOL IN AQUEOUS MEDIA WITH POTASSIUM FERRICYANIDE

The effects of potassium ferricyanide,sodium n-dodecyl sulfate,sodium hydroxide and temperature on the molecular weight and the yield of poly(2,6-dimethyl-1,4-phenylene oxide)(PPO) synthesized in an aqueous medium were studied.It was found that oxygen in air had little influence on the oxidative polymerization of 2,6-dimethylphenol(DMP) in the aqueous medium,and potassium ferricyanide was only an oxidant during the oxidative polymerization of DMP.Sodium n-dodecyl sulfate could stabilize polymer particles...     

A novel synthetic method for preparing poly(2,6-dimethyl-1,4-phenylene oxide)/polystyrene alloy in reactor containing aqueous medium

Considering the defect of solution polymerization of 2,6-dimethylphenol (DMP), the low molecular weight of poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) synthesized in water and difficulty in processing of PPO, a novel one-pot synthetic method for preparing PPO/PS alloy in reactor containing aqueous medium was proposed based on green chemistry. In the presence of styrene, DMP was polymerized to form PPO, and then styrene was in situ polymerized under the initiation of dibenzoyl peroxide (BPO) and dicumyl peroxide (DCP), finally thermodynamically compatible PPO/PS alloy was prepared. It was found that the introduction of styrene during the oxidative polymerization of DMP could increase the molecular weight of PPO. When styrene content was 50 wt%, for the synthesized PPO/PS alloy the yield and the weight-average molecular weight were determined to be 95% and 1.7 × 10⁵ for PPO, 93% and 2.0 × 10⁵ for PS, respectively.     

Preparation and characterization of CPPO/BPPO blend membranes for potential application in alkaline direct methanol fuel cell

A series of hydroxyl-conducting anion-exchange membranes were prepared by blending chloroacetylated poly(2,6-dimethyl-1,4-phenylene oxide) (CPPO) with bromomethylated poly(2,6-dimethyl-1,4-phenylene oxide) (BPPO), and their fuel cell-related performances were evaluated. The resulting membranes exhibited high hydroxyl conductivities (0.022–0.032 S cm⁻¹ at 25 °C) and low methanol permeability (1.35 × 10⁻⁷ to 1.46 × 10⁻⁷ cm² s⁻¹). All the blend membranes proved to be miscible or partially miscible under the investigations of scanning electron microscopy (SEM) and differential scanning calorimeters (DSC). By condition optimization, the blend membranes with 30–40 wt% CPPO are recommended for application in direct methanol alkaline fuel cells because they showed low methanol permeability, excellent mechanical properties and comparatively high hydroxyl conductivity.     

以离子-离子相互作用增强共混相容性Ⅰ.聚苯醚离聚体/聚(苯乙烯-乙烯吡啶)共混体系

本文从溶液行为和固体热行为对聚（2，6-二甲基1，4-苯醚）（PPO）离聚体（磺化聚苯醚或接化聚苯醚）／聚（苯乙烯-4-乙烯吡啶）（PS－VP）共混物进行了研究。DSC研究表明磺化度为7．7％mol的SPPO／PS－VP和羧化度为15％molCPPO炉S－VP在整个组成范围都是相容的。溶液行为研究表明，与对应的PPO／PS－VP共混物相比，这两个系列的共混物都表现出较高的比浓粘度。这是由于聚苯醚离聚体上的酸基发生质子转移，两组分间强烈的离子-离子相互作用导致分子间的络合，从而使比浓粘度的提高，也正是这种离子-离子相互作用使得这两对共混物完全相容。     

Mechanistic studies of the oxidative coupling polymerization of phenols. VI. Comparison of reactivities of DMP,PPO-dimer,and -trimer in the copper-catalyzed oxidative coupling polymerization

In the oxidative coupling polymerization, catalyzed by copper-amine complexes, the oxidation rates of 2,6-dimethylphenol (DMP) and its C? O-coupled dimer [4-(2′,6′-dimethylphenoxy)-2,6-dimethylphenol] and trimer [4-(-4′-(2″,6″-dimethylphenoxy)-2′,6′-dimethylphenoxy))-2,6-dimethylphenol] have been determined. The DMP concentration dependence shows a Michaelis–Menten-type behavior. On the other hand, the dimer and trimer showed a first-order rate-dependence in the respective phenol concentrations. This indicates that the slow reaction step, following an equilibrium complex formation between DMP and copper complex, is relatively fast for both the dimer and the trimer. Therefore, coordination of dimer or trimer to the copper complex appears to be rate-determining. Furthermore, the dimer and trimer gave overall reaction rates approximately eight times higher than found for DMP. Following the Flory principle of equal reactivity for functional groups of oligomers in polycondensations, all PPO oligomers can be assumed to have equally high oxidation rates as the dimer and trimer. The yield of undesired DPQ side product is strongly reduced when starting with the dimer (0.18%), or trimer (0.17%), compared to 3.3% for DMP. This is not unexpected, since DPQ can only be formed from two monomeric DMP residues. In fact, using a 1/10 molar mixture of dimer/DMP already results in a DPQ yield of only 1.7%. Furthermore, when starting from DMP, it has been observed that DPQ was predominantly formed during the first 30% conversion. Starting from dimer (or trimer) DPQ was formed at an almost constant very low rate during the whole course of the reaction. From these experiments it can be concluded that the most important polymerization reaction involves oxidation of copper-coordinated DMP anion to its corresponding cations, followed by coupling with a copper coordinated PPO chain.     

Nonisothermal thermogravimetry of polymers

The model of weight loss taking place in each step of a scheme of consecutive reactions was applied to nonisothermal thermogravimetric records of bromomethylated poly(2,6-dimethyl-1,4-phenylene oxide). The release of HBr was found to be faster in air than in nitrogen. A significant reduction in the apparent activation energy of dehydrobromination as compared with decomposition of the nonbrominated polymer was ascribed not only to a reduction in the activation energy of the initiation reaction, but also to an increase in the order of the termination reaction (from 1 for the nonbrominated polymer to 2 for the highly brominated polymer).     

新型层状晶态聚(苯乙烯-苯乙烯基膦酸)-磷酸锌铵有机聚合物-无机杂化材料的合成与表征

将苯乙烯-苯乙烯基膦酸共聚物、 二水合醋酸锌和磷酸二氢铵在温和的条件下反应, 通过调节无机磷酸盐和有机膦酸的比例, 合成了一系列有机聚合物-无机杂化材料聚(苯乙烯-苯乙烯基膦酸)-磷酸锌铵. 通过FTIR, TG, XRD, SEM和TEM等手段对其进行表征并测试了其催化性能. 结果表明, 聚(苯乙烯-苯乙烯基膦酸)-磷酸锌铵是一种新型层状晶态的有机聚合物-无机杂化材料, 具有较高的热稳定性和特殊的多孔结构. 将其作为催化剂载体, 以芳香二胺作为连接基团, 轴向固载手性Salen Mn(Ⅲ)制备了多相催化剂, 并用于非功能化烯烃的不对称环氧化反应. 催化实验结果表明, 该催化剂在以m-CPBA/NMO为氧化体系催化α-甲基苯乙烯和茚的反应中显示出优良的催化性能, 如催化茚的e.e.值可达99%, 并且可以回收利用, 循环使用8次仍具有较好的催化活性, 具有潜在的工业应用价值.     

硅氧烷交联的咪唑基团功能化聚苯醚/聚四氟乙烯耐高温质子交换膜

以聚苯醚(PPO)为基体材料, 通过溴甲基化及咪唑基团功能化, 与聚四氟乙烯(PTFE)复合、 硅氧烷基团水解交联及磷酸掺杂, 制备了兼具高磷酸掺杂含量、 高质子电导率和良好机械性能的高温质子交换膜材料. 以甲基咪唑(MeIm)和咪唑基硅氧烷化合物(SiIm)为功能化试剂(其中咪唑基团提供了磷酸作用位点, 同时SiIm中的硅氧烷基团水解后得到Si—O—Si交联网络结构), 提高了膜材料的机械稳定性. 与PTFE的复合进一步增强了膜材料的机械强度. 结果表明, 复合膜具有较高的电导率和一定的机械强度. 当磷酸掺杂质量分数为242.5%时, PPO-50%SiIm-50%MeIm/PTFE复合膜在160 ℃不加湿条件下的电导率为0.09 S/cm, 室温下的断裂拉伸强度为3.6 MPa.     

Effects of Mechanical Stretching on the Properties of Conjugated Polymers: Case Study for MEH-PPV and P3HT Oligomers

Nowadays, the development of new materials for applications in flexible optoelectronic devices is one of the main frontiers of science. However, in order to improve the applicability and durability of such devices, a deeper understanding of the effects induced by mechanical deformations on the properties of their components is still necessary. In this sense, in the present study, it is evaluated the effect of mechanical stretching in the structural, electronic, and optical responses of two widely investigated organic polymers with great technological interest: poly(2-methoxy,5-(2′-ethylhexyloxy)-1,4-phenylene vinylene) and poly(3-hexylthiophene-2,5-diyl). Hartree–Fock and density functional theory electronic structure calculation methods were employed for the study of oligomeric structures subjected to increasing stretch levels along the polymerization axis. The results show a dependence of the polymer properties with the mechanical deformation, allowing to identify distinct response regimes according to the main chain stretching. In particular, it is noticed that large stretches lead to nonfunctional devices, mainly due to the localization of the frontier orbitals and degradation of optoelectronic properties. In addition, it was also identified that very small deformations can lead to some interesting optoelectronic responses, which could indicate an alternative route for the design of organic devices via mechanical processes. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1413–1426