On the balancing of structural and acoustic performance of a sandwich panel based on topology,property, and size optimization

Balancing structural and acoustic performance of a multi-layered sandwich panel is a formidable undertaking. Frequently the gains achieved in terms of reduced weight, still meeting the structural design requirements, are lost by the changes necessary to regain acceptable acoustic performance. To alleviate this, a design method for a multifunctional load bearing vehicle body panel is proposed which attempts to achieve a balance between structural and acoustic performance. The approach is based on numerical modelling of the structural and acoustic behaviour in a combined topology, size, and property optimization in order to achieve a three dimensional optimal distribution of structural and acoustic foam materials within the bounding surfaces of a sandwich panel. In particular the effects of the coupling between one of the bounding surface face sheets and acoustic foam are examined for its impact on both the structural and acoustic overall performance of the panel. The results suggest a potential in introducing an air gap between the acoustic foam parts and one of the face sheets, provided that the structural design constraints are met without prejudicing the layout of the different foam types.     

Level-set based topology optimization for electromagnetic dipole antenna design

This paper presents a level-set framework for a typical electromagnetic design problem of dipole antenna. In this study, the geometrical configuration of an antenna is represented by the zero-level contour of a higher-dimensional level-set function. The governing equation for the induced current flow on a metal surface is the Electric Field Integral Equation (EFIE), which takes into account the electric component of the incident wave. The design objective is formulated in terms of the surface current and incident electric field. The normal velocity of the level-set model, which reflects the sensitivity of the objective function, is derived from the adjoint variable method and shape derivative. By optimizing the objective function, the area with the highest current density, to which the voltage feeding should be applied, can be reshaped. The advantages of adopting the level-set technique for electromagnetic design lie in its capacity for capturing sophisticated topological changes and facilitation in mathematical representation of the design configuration. The demonstrative examples of dipole antenna design show that the level-set method results in a fairly smooth optimization process, where the vacuum/metal interface gradually attains its optimal configuration. A series of design cases with self-adjoint and non-self-adjoint sensitivity analyses are studied and compared to the benchmarking problems in dipole antenna.     

Level set based structural topology optimization for minimizing frequency response

For the purpose of structure vibration reduction, a structural topology optimization for minimizing frequency response is proposed based on the level set method. The objective of the present study is to minimize the frequency response at the specified points or surfaces on the structure with an excitation frequency or a frequency range, subject to the given amount of the material over the admissible design domain. The sensitivity analysis with respect to the structural boundaries is carried out, while the Extended finite element method (X-FEM) is employed for solving the state equation and the adjoint equation. The optimal structure with smooth boundaries is obtained by the level set evolution with advection velocity, derived from the sensitivity analysis and the optimization algorithm. A number of numerical examples, in the frameworks of two-dimension (2D) and three-dimension (3D), are presented to demonstrate the feasibility and effectiveness of the proposed approach.     

Perceptually based head-related transfer function database optimization

In the context of binaural audio rendering, choosing the best head-related transfer function (HRTF) for an individual from large databases poses several problems. This study proposes a method to reduce the size of a given HRTF database. Participants, 45 in total, were asked to rate the quality of binaural synthesis for 46 HRTFs. The lack of reciprocity in the ratings was noted. Results were used to create a perceptually optimized HRTF subset which satisfied all participants' judgments. The subset was validated using localization tests on a separate group of subjects with results showing reduced errors when subjects were given their best choice, rather than their worst choice HRTF.     

Tailoring dispersion properties of photonic crystal waveguides by topology optimization

The paper describes a systematic method for the tailoring of dispersion properties of slab-based photonic crystal waveguides. The method is based on the topology optimization method which consists in repeated finite element frequency domain analyzes, analytical sensitivity analyzes and gradient based design updates. The goal of the optimization process is to come up with slow light, zero group velocity dispersion photonic waveguides or photonic waveguides with tailored dispersion properties for dispersion compensation purposes. Two examples concerning reproduction of a specific dispersion curve and design of a wide bandwidth, constant low group velocity waveguide demonstrate the efficiency of the method.     

Optimal poroelastic layer sequencing for sound transmission loss maximization by topology optimization method

Optimal layer sequencing of a multilayered acoustical foam is solved to maximize its sound transmission loss. A foam consisting of air and poroelastic layers can be optimized when a limited amount of a poroelastic material is allowed. By formulating the sound transmission loss maximization problem as a one-dimensional topology optimization problem, optimal layer sequencing and thickness were systematically found for several single and ranges of frequencies. For optimization, the transmission losses of air and poroelastic layers were calculated by the transfer matrix derived from Biot's theory. By interpolating five intrinsic parameters among several poroelastic material parameters, distinct air-poroelastic layer distributions were obtained; no filtering or postprocessing was necessary. The optimized foam layouts by the proposed method were shown to differ depending on the frequency bands of interest.     

Generation and classification of the translational shape-invariant potentials based on the analytical transfer matrix method

For the conventional translational shape-invariant potentials (TSIPs), it has demonstrated that the phase contribution devoted by the scattered subwaves in the analytical transfer matrix quantization condition is integrable and independent of n. Based on this fact we propose a novel strategy to generate the whole set of conventional TSIPs and classify them into three types. The generating functions are given explicitly and the Morse potential is taken as an example to illustrate this strategy.     

Structural topology optimization on sound radiation at resonance frequencies in thermal environments

Thermal and acoustic environments pose severe challenges to the structural design of hypersonic vehicles.One of them is to find optimal design that exhibits ideal acoustic characteristics in a frequency band,which is discussed in this paper through topology optimization aiming at resonance sound radiation in thermal environments.The sound radiation at resonance frequencies is the main component of response,minimization on which is likely to provide a satisfactory design.A bi-material plate subjected to uniform temperature rise and excited by harmonic loading is studied here.Thermal stress is first evaluated and considered as prestress in the following dynamic analysis;radiated sound power is then calculated through Rayleigh integral.Sensitivity analysis is carried out through adjoint method considering the complicated relationship between stress-induced geometric stiffness and design variables.As the resonance frequency is constantly changing during the optimization,its sensitivity should be considered.It is also noticed that mode switching may occur,so mode tracking technique is employed in this work.Some numerical examples are finally discussed.     

Two-dimensional poroelastic acoustical foam shape design for absorption coefficient maximization by topology optimization method

Optimal shape design of a two-dimensional poroelastic acoustical foam is formulated as a topology optimization problem. For a poroelastic acoustical system consisting of an air region and a poroelastic foam region, two different physical regions are continuously changed in an iterative design process. To automatically account for the moving interfaces between two regions, we propose a new unified model to analyze the whole poroelastic acoustical foam system with one set of governing equations; Biot's equations are modified with a material property interpolation from a topology optimization method. With the unified analysis model, we carry out two-dimensional optimal shape design of a poroelastic acoustical foam by a gradient-based topology optimization setting. The specific objective is the maximization of the absorption coefficient in low and middle ranges of frequencies with different amounts of a poroelastic material. The performances of the obtained shapes are compared with those of well-known wedge shapes, and the improvement of absorption is physically interpreted.     

Fabrication of transparent double-walled carbon nanotubes flexible matrix touch panel by laser ablation technique

This study reports on the fabrication of transparent double-walled carbon nanotubes (DWNTs) flexible matrix touch panel using the method of laser ablation. We employed an Nd:YAG laser (1064 nm) to pattern transparent DWNT thin film pre-coated on a PET substrate and successfully fabricated a flexible matrix touch panel. By increasing the laser energy, the ablation depth of transparent DWNT flexible thin film is increased but the sheet resistance (Ω/sq) is decreased. When the laser energy intensity reaches 117 mJ/cm², the DWNTs can be completely ablated from transparent DWNT flexible thin film. This method is rapid, simple, applicable to large-area processing and thus is potential for mass production.     

利用转移矩阵方法求解一维散射问题

利用转移矩阵方法,求解粒子通过任意势垒的透射系数及反射系数,并给出粒子的概率密度分布曲线.     

Constructing unified models based on E8 in ten dimensions

The vacuum energy is calculated for Yang-Mills (YM) system defined inD dimensional space-time ofS ¹×R ^d (D=d+1), where the possibility of the YM fields to acquire the vacuum expectation values onS ¹ is taken into account. The vacuum energy has already been obtained to the order of one-loop in many people. Here we calculate the vacuum energy inD dimensions to two-loop order. With an intention to reach higher loops, an approximation method is proposed, which is especially effective in higher dimensions. By this method, we can treat the higher-loop contributions of YM interactions as easily as we treat one-loop effect. As a check, we show reproduction of the two-loop contribution (D-dependence of the coefficient as well as the functional form) when the coupling constant is small. This approximation method is useful not only for the Kaluza-Klein theories but also for the finite temperature-density system (as a quark-gluon plasma).Minami-Ohsawa Hachioji-shi, Tokyo 92-03 Japan     

A new unified field theory based on the conformal group

We develop here a new unified theory of the electromagnetic and gravitational field, based on a six-dimensional generalization of Maxwell's equations; additional space-time coordinates are interpreted only as mathematical tools in order to obtain a linear realization of the four-dimensional conformal group.     

Design of small-scale gradient coils in magnetic resonance imaging by using the topology optimization method

A topology optimization method based on the solid isotropic material with penalization interpolation scheme is utilized for designing gradient coils for use in magnetic resonance microscopy. Unlike the popular stream function method, the proposed method has design variables that are the distribution of conductive material. A voltage-driven transverse gradient coil is proposed to be used as micro-scale magnetic resonance imaging(MRI) gradient coils, thus avoiding introducing a coil-winding pattern and simplifying the coil configuration. The proposed method avoids post-processing errors that occur when the continuous current density is approximated by discrete wires in the stream function approach. The feasibility and accuracy of the method are verified through designing the z-gradient and y-gradient coils on a cylindrical surface.Numerical design results show that the proposed method can provide a new coil layout in a compact design space.     

Structural-borne acoustics analysis and multi-objective optimization by using panel acoustic participation and response surface methodology

This paper is aimed to investigate the structural-borne acoustics analysis and multi-objective optimization of an enclosed box structure by using the panel acoustic participation (PAP) and response surface methodology (RSM). The acoustic frequency response function is applied to achieve the critical frequency of interest under each excitation. The PAP analysis is then carried out at all critical frequencies and the remarkable acoustic panels are identified. The correlation coefficient matrix method is proposed for reselecting and grouping the positions of acoustic panels identified to paste damping layer to control noise. With the help of faced central composite design, an efficient set of sample points are generated and then the second-order polynomial functions of sound pressure response at each critical frequency are computed and verified by the adjusted coefficient of multiple determination. The functional relationships between sound pressure responses and the thicknesses of damping layers are investigated, and multi-objective optimization of the thicknesses of damping layers is developed. The results indicate that, by using the PAP and RSM, the structural-borne acoustics at critical frequencies are calculated conveniently and controlled effectively. The optimization process of the explicit optimization model proposed in this paper is simple and the computational time is saved.     

Constructing a one-way hash function based on the unified chaotic system

A new one-way hash function based on the unified chaotic system is constructed. With different values of a key parameter, the unified chaotic system represents different chaotic systems, based on which the one-way hash function algorithm is constructed with three round operations and an initial vector on an input message. In each round operation, the parameters are processed by three different chaotic systems generated from the unified chaotic system. Feed-forwards are used at the end of each round operation and at the end of each element of the message processing. Meanwhile, in each round operation, parameter-exchanging operations are implemented. Then, the hash value of length 160 bits is obtained from the last six parameters. Simulation and analysis both demonstrate that the algorithm has great flexibility, satisfactory hash performance, weak collision property, and high security.     

基于平板探测器的2D-CT成像技术的研究

大面积非晶硅平板探测器(flat panel detector-FPD)在透射射线成像领域得到越来越多的应用。基于FPD的圆轨道FDK型三维计算机层析成像技术(Computed Tomography,3D-CT)检测速度快,但成像质量不及2D-CT。为发挥3D-CT速度优势,同时提高系统对物体感兴趣区域CT成像的性能,研究了一种基于FPD的、配合3D-CT功能的高像质2D-CT成像技术;提出了一种集噪声抑制、散射校正和高频细节增强于一体的2D-CT投影预处理方法,并完成了基于FPD的2D/3D-CT集成原型系统的研制。系统性能测试结果表明,基于FPD的2D-CT技术成像空间分辨率达3lp/mm,密度分辨率达5‰。     

Vibration analysis of pipelines with arbitrary branches by absorbing transfer matrix method

Branched pipes of arbitrary shapes are prevalent in pipe systems. Considering fluid–structure interaction (FSI), an absorbing transfer matrix method in frequency domain for fluid-filled pipelines with any branched pipes is proposed in this paper. A dominant chain of pipeline would be selected, and the point transfer matrix of each junction on the dominant chain would be determined. Here, the point transfer matrix, representing the influence of branched pipes at the junction on the dominant pipeline, was “absorbed” by the dominant chain. Based on these, with transfer matrixes of other elements, the fluid and structure dynamics problem could be solved following the chain transfer matrix method process.