Design of chiral tin(IV) aryloxide as a mild Lewis acid catalyst for enantioselective Diels-Alder reaction

A novel Sn(IV) aryloxide Lewis acid has been designed and prepared from SnCl₄ and (S)-3,3′-bis(3,5-bis(trifluoromethyl)phenyl)-1,1′-bi-2-naphthol. The chiral Sn(IV) Lewis acid has been successfully applied to the enantioselective Diels-Alder reaction.     

Lewis base stabilized lithium TMP-aluminates: an unexpected fragmentation and capture reaction involving cyclic ether 1,4-dioxane

Three Lewis base variations of the synthetically useful aluminate [L x Li(TMP)((i)Bu)Al((i)Bu)2], where L is TMPH, Et3N or PhC(=O)N(i)Pr2, are reported, together with the reaction of the benzamide complex with 1,4-dioxane, which surprisingly leads to fragmentation of the cyclic ether and capture of its alkoxy vinyl ether residue within a novel dilithium dialuminium hexaalkyl aggregate.     

A new polyoxometalate-based 3d-4f heterometallic aggregate: a model for the design and synthesis of new heterometallic clusters

A new polytungstoarsenate-based 3d-4f heterometallic aggregate has been synthesized, consisting of three {alpha-AsW10 O 38} fragments bridged by three {Fe-(mu3-O)3-Ce} heterometallic clusters.     

Ritigalin,a new thiocarbonic acid imide fromGlycosmis species

Summary From the lipophilic leaf extracts ofGlycosmis mauritiana andG. parviflora (Rutaceae-Aurantioideae), the novel thiocarbonic acid derived imide ritigalin was isolated as major component by MPLC and TLC. The structure was elucidated by spectroscopic evidence (¹H,¹³C NMR; MS; IR; UV).Herrn Professor Dr.K. Schlögl mit den besten Wünschen zum 70. Geburtstag gewidmet     

High-performance bioreactors: a new generation

Compact loop bioreactors with a total volume of 4 l were equipped with electrically controllable valves and pumps, most of the currently available on-line sensors, direct digital control systems and a process minicomputer; complete automatic operation was thus achieved. These reactors perform excellently: the mixing time is <1 s, oxygen transfer is not a limiting factor and the precision of control of more than 10 process variables is much better than so far reported on other systems. Such high-performance bioreactors were used in investigating the stable synchronous oscillations of Saccharomyces-type yeasts and the reduction of slightly soluble organic compounds with biocatalysts. The inherent advantages of on-line measurement (and control) are discussed.     

Remarkable Lewis acid effects on polymerization of functionalized alkenes by metallocene and lithium ester enolates

Drastic effects of Lewis acids E(C₆F₅)₃ (E = Al, B) on polymerization of functionalized alkenes such as methyl methacrylate (MMA) and N,N-dimethyl acrylamide (DMAA) mediated by metallocene and lithium ester enolates, Cp₂Zr[OC(OⁱPr)CMe₂]₂ (1) and Me₂CC(OⁱPr)OLi, are documented as well as elucidated. In the case of metallocene bis(ester enolate) 1, when combined with 2 equiv. of Al(C₆F₅)₃, it effects highly active ion-pairing polymerization of MMA and DMAA; the living nature of this polymerization system allows for the synthesis of well-defined diblock and triblock copolymers of MMA with longer-chain alkyl methacrylates. In sharp contrast, the 1/2B(C₆F₅)₃ combination exhibits low to negligible polymerization activity due to the formation of ineffective adduct Cp₂Zr[OC(OⁱPr)CMe₂]⁺[OC(OⁱPr)CMe₂B(C₆F₅)₃]⁻ (2). Such a profound Al vs. B Lewis acid effect has also been observed for the lithium ester enolate; while the Me₂CC(OⁱPr)OLi/2Al(C₆F₅)₃ system is highly active for MMA polymerization, the seemingly analogous Me₂CC(OⁱPr)OLi/2B(C₆F₅)₃ system is inactive. Structure analyses of the resulting lithium enolaluminate and enolborate adducts, Li⁺[Me₂CC(OⁱPr)OAl(C₆F₅)₃]⁻ (3) and Li⁺[Me₂CC(OⁱPr)OB(C₆F₅)₃]⁻ (4), coupled with polymerization studies, show that the remarkable differences observed for Al vs. B are due to the inability of the lithium enolborate/borane pair to effect the bimolecular, activated-monomer anionic polymerization as does the lithium enolaluminate/alane pair.     

Hexaphosphapentaprismane: a new gateway to organophosphorus cage compound chemistry

Several independent synthetic routes are described leading to the formation of a novel unsaturated tetracyclic phosphorus carbon cage compound tBu4C4P6 (1), which undergoes a light-induced valence isomerization to produce the first hexaphosphapentaprismane cage tBu4C4P6 (2). A second unsaturated isomer tBu4C4P6 (9) of 1 and the bis-[W(CO)5] complex 13 of 1 are stable towards similar isomerization reactions. Another starting material for the synthesis of the hexaphosphapentaprismane cage tBu4C4P6 (2) is the trimeric mercury complex [(tBu4C4P6)Hg]3 (11), which undergoes elimination of mercury to afford the title compound 2. Single-crystal X-ray structural determinations have been carried out on compounds 1, 2, 9, 11, and 13.     

A new approach to internal Lewis pairs featuring a phosphenium acid and a pyridine base

A bis(imino)acenaphthene (BIAN) ligand containing a pendant Lewis base has been used as a new framework to support a N-heterocyclic phosphenium cation (NHP). Reactivity studies demonstrate the ability of the ligand to act as a Lewis base, while the phosphorus centre provides a Lewis acidic site, giving new opportunities in NHP chemistry.     

Synthesis and characterization of a new type of heterometallic derivative of zirconium

ZrCl₄ reacts with the potassium salt of the bifunctional tridentate Schiff base HOC₆H₄C(H)=NCH₂CH(Me)OH (LH₂) in a 1:1 molar ratio in benzene to give a new complex Zr(L)Cl₂ which, on reaction with different potassium isopropoxymetallates [e.g., KAl(OPr ⁱ )₄, KTi(OPr ⁱ )₅, and KNb(OPr ⁱ )₆], yield novel heterobimetallic derivatives. These new homo and heteronuclear coordination compounds have been characterized by elemental (N, Cl, Al, Ti, and Nb) analyses, molecular weight (ebullioscopic) measurements and spectral [i.r., n.m.r. (¹H, ¹³C and ²⁷Al)] studies and probable structures for them have been suggested.     

Corannulene as a Lewis base: computational modeling of protonation and lithium cation binding.

A computational modeling of the protonation of corannulene at B3LYP/6-311G(d,p)//B3LYP/6-311G(d,p) and of the binding of lithium cations to corannulene at B3LYP/6-311G(d,p)//B3LYP/6-31G(d,p) has been performed. A proton attaches preferentially to one carbon atom, forming a sigma-complex. The isomer protonated at the innermost (hub) carbon has the best total energy. Protonation at the outermost (rim) carbon and at the intermediate (bridgehead rim) carbon is less favorable by ca. 2 and 14 kcal mol(-)(1), respectively. Hydrogen-bridged isomers are transition states between the sigma-complexes; the corresponding activation energies vary from 10 to 26 kcal mol(-)(1). With an empirical correction obtained from calculations on benzene, naphthalene, and azulene, the best estimate for the proton affinity of corannulene is 203 kcal mol(-)(1). The lithium cation positions itself preferentially over a ring. There is a small energetic preference for the 6-ring over the 5-ring binding (up to 2 kcal mol(-)(1)) and of the convex face over the concave face (3-5 kcal mol(-)(1)). The Li-bridged complexes are transition states between the pi-face complexes. Movement of the Li(+) cation over either face is facile, and the activation energy does not exceed 6 kcal mol(-)(1) on the convex face and 2.2 kcal mol(-)(1) on the concave face. In contrast, the transition of Li(+) around the corannulene edge involves a high activation barrier (24 kcal mol(-)(1) with respect to the lowest energy pi-face complex). An easier concave/convex transformation and vice versa is the bowl-to-bowl inversion with an activation energy of 7-12 kcal mol(-)(1). The computed binding energy of Li(+) to corannulene is 44 kcal mol(-)(1). Calculations of the (7)Li NMR chemical shifts and nuclear independent chemical shifts (NICS) have been performed to analyze the aromaticity of the corannulene rings and its changes upon protonation.     

Pentadienylsilanes as new reagents of the siteselective dienylmethylation of electrophiles promoted by a Lewis acid

(2,4-Pentadienyl)- and (2,4-hexadienyl)trimethylsilanes, prepared from the corresponding pentadienylpotassiums and trimethylchlorosilane, react smoothly with various electrophiles such as acetals, aldehydes and acid halides to give pentadienylation products, with regiospecific transposition of the pentadienyl group.     

Polystyrene-supported chloroaluminate ionic liquid as a new heterogeneous Lewis acid catalyst for Knoevenagel condensation

Non-hygroscopic polystyrene-supported chloroaluminate ionic liquid was prepared from the reaction of Memfield resin with 1- methylimidazole followed by reaction with aluminum chloride.This Lewis acidic ionic liquid is environmentally friendly heterogeneous catalyst for the Knoevenagel condensation of aromatic and aliphatic aldehydes with ethyl cyanoacetate.The catalyst is stable(as a bench top catalyst) and reusable.     

p-Carborane: a new cage spacer for photoactive metal polypyridine dyads

The first example of a binuclear ruthenium complex involving the p-carborane framework in the bridging ligand is reported. The bridging ligand is a symmetric linear array comprising a central p-carborane unit, two p-phenylene spacers, and two 5-yl-2,2'-bipyridine coordinating units. A homobinuclear Ru(II) complex, with 2,2'-bipyridine as peripheral ligands, was synthesized and characterized. The Ru(II)-Ru(III) mixed-valence species, obtained by partial oxidation, has been investigated with steady-state and time-resolved techniques in CH3CN. The rate of photoinduced electron transfer is 2.3 x 10(8) s(-1).     

Lewis acid promoted highly stereoselective rearrangement of 2,3-aziridino alcohols: a new efficient approach to beta-amino carbonyl compounds

A new Lewis acid promoted rearrangement reaction of 2,3-aziridino alcohols was discovered, which involved the highly stereoselective construction of a diastereogenic quaternary carbon center and efficient formation of beta-amino carbonyl compounds in excellent yields. A wide variety of Lewis acids were proved to be effective for the reaction, and a possible reaction mechanism was also discussed.     

Facile synthesis of a new family of cage molecules

Cyclic (2+3) Schiff-base condensation of the triamine tris(2-aminoethyl) amine with a range of dicarbonyls produces, in high yield, a new series of cage molecules.     

Synthesis of C2-symmetric bisamidines: a new type of chiral metal-free Lewis acid analogue interacting with carbonyl groups

The chiral bisamidine 5 has been prepared in just two steps from malonodinitrile. In the monocationic form this compound adopts a planar conformation with an almost convergent orientation of two N-H groups. Ketones, aldehydes, and nitro compounds are assumed to bind to this strongly polar cleft via hydrogen bonds, resulting in a Lewis-acid-like activation of the carbonyl groups. A broad scope of reactions (Diels-Alder, hetero-Diels-Alder, Friedel-Crafts) can be catalyzed. The observed accelerations surpass the rate effects of neutral hydrogen-bond donors such as thioureas or TADDOLs.     

A new approach to benzofuran synthesis: Lewis acid mediated cycloaddition of benzoquinones with stilbene oxides

We report a BF₃-mediated novel dehydrative cycloaddition reaction of benzoquinones with stilbene oxides to afford 2,3-diaryl-5-hydroxybenzofurans and 2,3-diaryl-5-hydroxydihydrobenzofurans in good combined yields. No change in the products or the yield is observed when using diphenylacetaldehyde and cis-stilbene oxide instead of trans-stilbene oxides. When stilbene oxide is reacted with hydroquinone instead of the corresponding benzoquinone under the same conditions, dihydrobenzofuran is isolated in high yield. On the basis of these results, we propose the following possible reaction mechanism: stilbene oxide is converted to a phenonium ion (the key intermediate), which undergoes nucleophilic attack by benzoquinone or the simultaneously generated hydroquinone and subsequent dehydrative intramolecular cyclization to afford benzofuran or dihydrobenzofuran, respectively.