Nitrogen and sulfur co-doped TiO2 nanosheets with exposed {001} facets: synthesis, characterization and visible-light photocatalytic activity

Nitrogen and sulfur co-doped TiO(2) nanosheets with exposed {001} facets (N-S-TiO(2)) were prepared by a simple mixing-calcination method using the hydrothermally prepared TiO(2) nanosheets powder as a precursor and thiourea as a dopant. The resulting samples were characterized by transmission electron microscope, X-ray diffraction, N(2) adsorption-desorption isotherms, X-ray photoelectron spectroscopy, and UV-Vis absorption spectroscopy. The electronic properties of N,S co-doped TiO(2) were studied using the first-principle density functional theory (DFT). The photocatalytic activity of N-S-TiO(2) was evaluated by degradation of 4-chlorophenol (4-CP) aqueous solution under visible light irradiation. The production of hydroxyl radicals (˙OH) on the surface of visible-light-irradiated samples was detected by photoluminescence technique using terephthalic acid as a probe molecule. The results show that nitrogen and sulfur atoms were successfully incorporated into the lattice of TiO(2), which resulted in N-S-TiO(2) samples exhibiting stronger absorption in the UV-visible range with a red shift in the band gap transition. The first-principle DFT calculations further confirm that N and S co-dopants can induce the formation of new energy levels in the band gap, which is associated with the response of N-S-TiO(2) nanosheets to visible light irradiation. Surprisingly, pure TiO(2) nanosheets show the visible-light photocatalytic activity for the degradation of 4-CP mainly due to the substrate-surface complexation of TiO(2) and 4-CP, which results in extending absorption of titania to visible light region through ligand-to-titanium charge transfer. The N-S-TiO(2) samples studied exhibited an enhanced visible-light photocatalytic activity than pure TiO(2). Especially, the doped TiO(2) sample at the nominal weight ratio of thiourea to TiO(2) powder of 2 showed the highest photocatalytic activity, which was about twice greater than that of Degussa P25. The enhanced activity of N-S-TiO(2) can be primarily attributed to the synergetic effects of two factors including the intense absorption in the visible-light region and the exposure of highly reactive {001} facets of TiO(2) nanosheets. The former is beneficial for the photogeneration of electrons and holes participating in the photocatalytic reactions, and the latter facilitates adsorption of 4-CP molecules on the surface of TiO(2) nanosheets.     

Single-crystal NaY(MoO4)2 thin plates with dominant {001} facets for efficient photocatalytic degradation of dyes under visible light irradiation

Single-crystal NaY(MoO(4))(2) thin plates dominated by high-energy {001} facets were hydrothermally synthesized under relatively mild conditions, free of organic additives, seeds and templates. The as-obtained NaY(MoO(4))(2) thin plates showed an excellent visible-light-responding photocatalytic activity for degradation of dyes in water.     

Tunable photocatalytic selectivity of TiO2 films consisted of flower-like microspheres with exposed {001} facets

TiO(2) films composed of flower-like TiO(2) microspheres with exposed {001} facets were synthesized by a simple one-pot hydrothermal method and exhibited tunable photocatalytic selectivity towards decomposition of azo dyes in water by modifying the surface of TiO(2) microspheres as well as by varying the degree of etching of {001} facets.     

Nitrogen self-doped nanosized TiO2 sheets with exposed {001} facets for enhanced visible-light photocatalytic activity

Nitrogen self-doped TiO(2) nanosheets with exposed {001} facets (ca. 67%) were synthesized by solvothermal treatment of TiN in a HNO(3)-HF ethanol solution and exhibited much higher visible-light photocatalytic H(2)-production activity than nitrogen doped TiO(2) microcrystallites with exposed {001} facets (ca. 60%) by a factor of 4.1.     

Hierarchical TiO2 nanospheres with dominant {001} facets: facile synthesis, growth mechanism, and photocatalytic activity

Hierarchical TiO(2) nanospheres with controlled surface morphologies and dominant {001} facets were directly synthesized from Ti powder by a facile, one-pot, hydrothermal method. The obtained hierarchical TiO(2) nanospheres have a uniform size of 400-500?nm and remarkable 78?% fraction of {001} facets. The influence of the reaction temperature, amount of HF, and reaction time on the morphology and the exposed facets was systematically studied. A possible growth mechanism speculates that Ti powder first dissolves in HF solution, and then flowerlike TiO(2) nanostructures are formed by assembly of TiO(2) nanocrystals. Because of the high concentration of HF in the early stage, these TiO(2) nanostructures were etched, and hollow structures formed on the surface. After the F(-) ions were effectively absorbed on the crystal surfaces, {001} facets appear and grow steadily. At the same time, the {101} facets also grow and meet the {101} facets from adjacent truncated tetragonal pyramids, causing coalescence of these facets and formation of nanospheres with dominant {001} facets. With further extension of the reaction time, single-crystal {001} facets of hierarchical TiO(2) nanospheres are dissolved and TiO(2) nanospheres with dominant {101} facets are obtained. The photocatalytic activities of the hierarchical TiO(2) nanospheres were evaluated and found to be closely related to the exposed {001} facets. Owing to the special hierarchical architecture and high percentage of exposed {001} facets, the TiO(2) nanospheres exhibit much enhanced photocatalytic efficiency (almost fourfold) compared to P25 TiO(2) as a benchmark material. This study provides new insight into crystal-facet engineering of anatase TiO(2) nanostructures with high percentage of {001} facets as well as opportunities for controllable synthesis of 3D hierarchical nanostructures.     

Photocatalytic activity of Fe and Cu co-doped TiO2 nanoparticles under visible light

Journal of Sol-Gel Science and Technology - The photocatalytic activity of single transition metal-doped TiO2 nanoparticles is well established. This article reports the synthesis of Fe and Cu...     

Nitrogen-doped titanate-anatase core-shell nanobelts with exposed {101} anatase facets and enhanced visible light photocatalytic activity

Anatase TiO(2) with specifically exposed facets has been extensively studied for maximizing its photocatalytic activity. However, most previous preparation methods involve high-pressure processing and corrosive chemicals. Few works have been conducted on hierarchical composite nanostructures assembled from well-defined TiO(2) nanocrystals. Here, we report a facile method for the preparation of nitrogen-doped titanate-anatase core-shell nanobelts. Anatase nanorods with specifically exposed {101} facets were obtained from a simple evaporation-induced, self-assembly (EISA) process and coupled with another semiconductor photocatalyst. The composite material with improved visible-light-harvesting ability, high charge-hole mobility, and low electron-hole recombination exhibited high photocatalytic performance and stability. The results presented here will make significant contributions toward the development of delicate composite photocatalysts for photocatalytic water purification and solar energy utilization.     

Synthesis of micro-sized titanium dioxide nanosheets wholly exposed with high-energy {001} and {100} facets

A new synthetic strategy was developed to prepare large-sized well-defined anatase TiO(2) nanosheets wholly dominated with thermodynamically unfavorable high-reactive {001} and {100} facets, which has a percentage of 98.7% and 1.3%, respectively. The as-prepared anatase TiO(2) nanosheets show a well-faceted morphology and have a large size in length (ca. 4.14 μm). The formation mechanism of the anatase TiO(2) nanosheets was also analyzed and investigated.     

Photocatalytic water oxidation with nonsensitized IrO2 nanocrystals under visible and UV light

Rutile IrO(2) is known as being among the best electrocatalysts for water oxidation. Here we report on the unexpected photocatalytic water oxidation activity of 1.98 nm ± 0.11 nm succinic acid-stabilized IrO(2) nanocrystals. From aqueous persulfate and silver nitrate solution the nonsensitized particles evolve oxygen with initial rates up to 0.96 μmol min(-1), and with a quantum efficiency of at least 0.19% (measured at 530 nm). The catalytic process is driven by visible excitations from the Ir-d(t(2g)) to the Ir-d(e(g)) band (1.5-2.75 eV) and by ultraviolet excitations from the O-p band to the Ir-d(e(g)) (>3.0 eV) band. The formation of the photogenerated charge carriers can be directly observed with surface photovoltage spectroscopy. The results shed new light on the role of IrO(2) in dye- and semiconductor-sensitized water splitting systems.     

Solid state precursor strategy for synthesizing hollow TiO2 boxes with a high percentage of reactive {001} facets exposed

Three-dimensional, hollow, anatase TiO(2) boxes, each was enclosed by six single-crystalline TiO(2) plates exposed with highly reactive {001} facets, were facilely obtained by calcining a cubic TiOF(2) solid precursor at 500-600 °C. The formation of such particular nanostructures is attributed to the hard self-template restriction and the adsorption of F(-) ions from the TiOF(2).     

Photocatalytic degradation of sulfadiazine in suspensions of TiO2 nanosheets with exposed (001) facets

Antibiotics such as sulfonamides are widely used in agriculture as growth promoters and medicine in treatment of infectious diseases. However, the release of these antibiotics has caused serious environmental problems. In this paper, photocatalytic oxidation technology was used to degrade sulfadiazine (SDZ), one of the typical sulfonamides antibiotics, in UV illuminated TiO₂ suspensions. It was found that TiO₂ nanosheets (TiO₂-NSs) with exposed (001) facets exhibit much higher photoreactivity towards SDZ degradation compared to TiO₂ nanoparticles (TiO₂-NPs) with a rate constant increases from 0.017 min⁻¹ to 0.035 min⁻¹, improving by a factor of 2.1. Under the attacking of reactive oxygen species (ROSs) such as superoxide radicals (O₂^–) and hydroxyl radicals (OH), SDZ was steady degraded on the surface of TiO₂-NSs. Based on the identification of the produced intermediates by LC–MS/MS, possible degradation pathways of SDZ, which include desulfonation, oxidation and cleavage, were put forwards. After UV irradiation for 4 h, nearly 90% of the total organic carbon (TOC) can be removed in suspensions of TiO₂-NSs, indicating the mineralization of SDZ. TiO₂-NSs also exhibits excellent stability in photocatalytic degradation of SDZ in wide range of pH. Even after recycling used for 7 times, more than 91.3% of the SDZ can be efficiently removed, indicating that they are promising to be practically used in treatment of wastewater containing antibiotics.     

Hierarchical TiO2 microspheres: synergetic effect of {001} and {101} facets for enhanced photocatalytic activity

Well-faceted nanocrystals of anatase TiO(2) with specific reactive facets have attracted extraordinary research interest due to their many intrinsic shape-dependent properties. In this work, hierarchical TiO(2) microspheres consisting of anatase nanosheets or decahedrons were synthesized by means of a facile hydrothermal technique; meanwhile, the percentage of {001} facets can be tuned from 82 to 45%. Importantly, by investigating the photo-oxidation reactions for ˙OH radical generation and photoreduction reactions for hydrogen evolution, the TiO(2) microspheres consisting of nano-decahedrons with 45% {001} facets show superior photoreactivity (more than 4.8-times) compared to the nanosheets with 82% {001} facets. By analyzing the results of scanning electron microscopy (SEM), photoluminescence (PL) and first-principles density functional theory (DFT) calculations, a model of charge separation between the well-formed {001} and {101} facets is proposed, and the enhanced photocatalytic efficiency is largely attributed to the efficient separation of photogenerated charges among the crystal facets co-exposed.     

{001} facets dominated anatase TiO2: Morphology, formation/etching mechanisms and performance

Controllable growth of anatase TiO2 crystals with exposed high reactive crystal facets has aroused great attention in the fields of science and technology due to their unique structure-dependent properties. Recently, much effort has been paid to synthesize anatase TiO2 crystals with exposed high reactive {001} facets. Herein, we review the recent progress in synthesizing {001} facets dominated anatase TiO2 crystals with different morphologies by various synthetic methods. Furthermore, our review is mainly focused on the formation/etching mechanisms of {001} facets dominated anatase TiO2 crystals based on our and other studies. The extensive application potentials of the anatase TiO2 crystals with exposed {001} facets have been summarized in this review such as photocatalysis, photoelectrocatalysis, solar energy conversion, lithium ion battery, and hydrogen generation. Based on the current studies, we give some perspectives on the research topic. We believe that this comprehensive review on anatase TiO2 crystals with high reactive {001} facets can further promote the relative research in this field.     

Hierarchical N-doped TiO2 hollow microspheres consisting of nanothorns with exposed anatase {101} facets

A green solvothermal synthesis approach employing water as a hollowing controller and diethylenetriamine as both crystal growth stabilizer and N dopant source to the preparation of hierarchical N-doped TiO(2) hollow microspheres comprised of nanothorns with exposed anatase {101} facets is established. The superstructured TiO(2) shows excellent photocatalytic activities in degrading dyes under visible light irradiation.     

Anatase TiO(2) microspheres with exposed mirror-like plane {001} facets for high performance dye-sensitized solar cells (DSSCs)

Anatase TiO(2) microspheres with exposed mirror-like plane {001} facets were successfully synthesized via a facile hydrothermal process. The photoanode composed of TiO(2) microsphere top layer shows an improved DSSCs efficiency owing to the superior light scattering effect of microspheres and excellent light reflecting ability of the mirror-like plane {001} facets.