Biotinylated thermoresponsive core cross-linked nanoparticles via RAFT polymerization and "click" chemistry

A straightforward approach to the synthesis of "clickable" thermoresponsive core cross-linked (CCL) nanoparticles was developed. This approach was based on reversible addition-fragmentation chain transfer (RAFT) radical cross-linking polymerization of styrene and divinylbenzene with azide-functionalized poly(N-isopropylacrylamide) (PNIPAM-N(3)) as macro chain transfer agent in a selective solvent. Spherical nanoparticles with a diameter of 12nm were obtained after 24h polymerization. When the lyophilized CCL nanoparticles were dispersed in THF, spherical nanoparticles were observed, confirming the stability of CCL nanoparticles. The transmission electron microscopy (TEM) studies demonstrated that spherical nanoparticles and wormlike structure coexisted in the aqueous solution. The CCL nanoparticles have a lower critical solution temperature (LCST) at about 29.6°C, a little lower than that of PNIPAM homopolymer. Biotin molecules were conjugated to the surface of CCL nanoparticles via "click" chemistry in aqueous media. After bioconjugation, the LCST shifted to 28.3°C. The bioavailability of biotin to protein avidin was evaluated by a 4'-hydroxyazobenzene-2-carboxylic acid/avidin (HABA/avidin) binding assay and TEM.     

Electroluminescent networks via photo "click" chemistry

The use of thiol-ene click chemistry is demonstrated for the first time as a suitable method for cross-linking thin films of 4-phenylethenyl end-capped poly(fluorene). Cross-linking was accomplished by a simple, brief UV curing step at modest temperatures. This chemistry provides an advantage over similar schemes employed for cross-linking conjugated polymers since it does not require elevated temperature or produce potentially detrimental side products. Thiol-ene cross-linking was found to preserve the emissive color integrity of the poly(fluorene) films and allowed for facile photopatterning of the active polymer layer. Furthermore, the investigated cross-linking chemistry was shown to be fully compatible with fabrication of polymer light-emitting diodes (PLEDs) whose performance was comparable to noncross-linked devices. Multicolor PLEDs were also demonstrated by taking advantage of the photopatternability of the thiol-ene based system.     

Dendronized linear polymers via "click chemistry"

Dendronized linear polymers are prepared from dendritic azides and poly(vinylacetylene) using "click chemistry." The Cu(I)-catalyzed Huisgen [2 + 3] cycloaddition is quantitative up to the third generation.     

A citric acid-derived ligand for modular functionalization of metal oxide surfaces via "click" chemistry

Citric acid is a widely used surface-modifying ligand for growth and processing of a variety of nanoparticles; however, the inability to easily prepare derivatives of this molecule has restricted the development of versatile chemistries for nanoparticle surface functionalization. Here, we report the design and synthesis of a citric acid derivative bearing an alkyne group and demonstrate that this molecule provides the ability to achieve stable, multidentate carboxylate binding to metal oxide nanoparticles, while also enabling subsequent multistep chemistry via the Cu(I)-catalyzed azide-alkyne cycloaddition (CuAAC) reaction. The broad utility of this strategy for the modular functionalization of metal oxide surfaces was demonstrated by its application in the CuAAC modification of ZnO, Fe(2)O(3), TiO(2), and WO(3) nanoparticles.     

Novel types of carborane-carrier hyaluronan derivatives via "click chemistry"

Two new HA derivatives bearing carborane rings were synthesized by click chemistry. The optimal conditions were assessed for the preparation of biocompatible boron carriers, potentially suitable for application in BNCT and capable of targeting the CD44 antigen. The new polymeric samples were characterized by means of NMR-spectroscopy techniques that gave degrees of 17 and 8% for HAAACB and HapACB, respectively. Both HAAACB and HApACB turned out to be nontoxic for colorectal, ovarian and bladder tumor cell lines, to disclose a specific interaction with the CD44 antigen as the native hyaluronan moiety, and to deliver boron-atom concentrations largely sufficient for BNCT therapy when accumulated in cancer cells.     

Efficient synthesis of multifunctional polymers via thiol-epoxy "click" chemistry

We demonstrate high efficiency and simplicity of the thiol-epoxy reaction towards preparation of a wide range of main-chain as well as end-chain multifunctional polymers.     

Synthesis of a hybrid assembly composed of titanium dioxide nanoparticles and thin multi-walled carbon nanotubes using "click chemistry"

A hybrid assembly composed of thin multi-walled carbon nanotubes (t-MWCNT) and titanium dioxide (TiO(2)) has been prepared by using "click" chemistry for photocatalytic applications. TiO(2)-decorated t-MWCNT hybrids with anatase phase TiO(2) were obtained from the reaction of an azide moiety-containing TiO(2) with alkyne-functionalized t-MWCNTs. The hybrids were systematically characterized using Fourier transform infrared spectroscopic (FT-IR), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray spectrum (EDX), and X-ray diffraction (XRD) measurements. The nanohybrid has been proved to be highly active and robust for photocatalytic degradation of methyl orange. The click coupling approach is a simple and convenient route to efficiently assemble TiO(2) on the surface of carbon nanotubes, and can be extended to obtain many other nanoparticle hybrids based on carbon nanotubes.     

Biofunctionalization on alkylated silicon substrate surfaces via "click" chemistry

Biofunctionalization of silicon substrates is important to the development of silicon-based biosensors and devices. Compared to conventional organosiloxane films on silicon oxide intermediate layers, organic monolayers directly bound to the nonoxidized silicon substrates via Si-C bonds enhance the sensitivity of detection and the stability against hydrolytic cleavage. Such monolayers presenting a high density of terminal alkynyl groups for bioconjugation via copper-catalyzed azide-alkyne 1,3-dipolar cycloaddition (CuAAC, a "click" reaction) were reported. However, yields of the CuAAC reactions on these monolayer platforms were low. Also, the nonspecific adsorption of proteins on the resultant surfaces remained a major obstacle for many potential biological applications. Herein, we report a new type of "clickable" monolayers grown by selective, photoactivated surface hydrosilylation of α,ω-alkenynes, where the alkynyl terminal is protected with a trimethylgermanyl (TMG) group, on hydrogen-terminated silicon substrates. The TMG groups on the film are readily removed in aqueous solutions in the presence of Cu(I). Significantly, the degermanylation and the subsequent CuAAC reaction with various azides could be combined into a single step in good yields. Thus, oligo(ethylene glycol) (OEG) with an azido tag was attached to the TMG-alkyne surfaces, leading to OEG-terminated surfaces that reduced the nonspecific adsorption of protein (fibrinogen) by >98%. The CuAAC reaction could be performed in microarray format to generate arrays of mannose and biotin with varied densities on the protein-resistant OEG background. We also demonstrated that the monolayer platform could be functionalized with mannose for highly specific capturing of living targets (Escherichia coli expressing fimbriae) onto the silicon substrates.     

Phosphatidylcholine-derived bolaamphiphiles via click chemistry

The copper-catalyzed azide alkyne cycloaddition is employed to modify phosphatidylcholine precursors with sn-2 acyl chains containing terminal alkyne or azide groups. Although the reactions are conducted as biphasic dispersions, the yields are essentially quantitative. Bolaamphiphiles are formed by simply clicking together two phosphatidylcholine alkyne precursors to a central bisazide scaffold. The chemistry introduces polar 1,4-triazole units into the lipophilic region of the bilayer membrane, and the bolaamphiphiles do not form stable vesicles. [structure: see text].     

ParaCEST MRI contrast agents capable of derivatization via"click" chemistry

A comprehensive series of lanthanide chelates has been prepared with a tetrapropargyl DOTAM type ligand. The complexes have been characterized by a combination of (1)H NMR, single-crystal X-ray crystallography, CEST and relaxation studies and have also been evaluated for potential use as paramagnetic chemical exchange saturation transfer (ParaCEST) contrast agents in magnetic resonance imaging (MRI). We demonstrate the functionalization of several chelates by means of alkyne-azide "click" chemistry in which a glucosyl azide is used to produce a tetra-substituted carbohydrate-decorated lanthanide complex. The carbohydrate periphery of the chelates has a potent influence on the CEST properties as described herein.     

Synthesis of carbon-encapsulated iron nanoparticles via solid state reduction of iron oxide nanoparticles

The encapsulation of iron nanoparticles in protective carbon cages leads to unique hybrid core-shell nanomaterials. Recent literature reports suggest that such nanocomposites can be obtained in a relatively simple process involving the solid state carbothermal reduction of iron oxide nanoparticles. This approach is very attractive because it does not require advanced equipment and consumes less energy in comparison to widely used plasma methods. The presented more-in-depth study shows that the carbothermal approach is sensitive to temperature and the process yield strongly depends on the morphology and crystallinity of the carbon material used as a reductant.     

Thermally curable polyvinylchloride via click chemistry

Novel side‐chain benzoxazine functional polyvinylchloride (PVC‐Benzoxazine) was synthesized by using “Click Chemistry” strategy. First, approximately 10% of chloro groups of PVC were converted to azido groups by using NaN₃ in N,N‐dimethylformamide. Propargyl benzoxazine was prepared independently by a ring closure reaction between p‐propargyloxy aniline, paraformaldehyde, and phenol. Finally, azidofunctionalized PVC was coupled to propargyl benzoxazine with high efficiency by click chemistry. The spectral and thermal analysis confirmed the presence of benzoxazine functionality in the resulting polymer. It is shown that PVC containing benzoxazine undergoes thermally activated curing in the absence of any catalyst forming PVC thermoset with high thermal stability. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3512–3518, 2008     

Magnetic nanoparticle assembly on surfaces using click chemistry

Controlled assembly of ferromagnetic nanoparticles on surfaces is of crucial importance for a range of spintronic and data storage applications. Here, we present a novel method for assembling monolayers of ferromagnetic FePt nanoparticles on silicon oxide substrates using "click chemistry". Reaction of alkyne-functionalized FePt nanoparticles with azide-terminated self-assembled monolayers (SAMs), on silicon oxide, leads to the irreversible attachment of magnetic nanoparticles to the surface via triazole linkers. Based on this covalent interaction, well-packed monolayers of FePt nanoparticles were prepared and nanoparticle patterns are generated on surfaces via microcontact printing (μCP).     

Design of liquid-crystalline gold nanoparticles by click chemistry

Mesomorphic alkyne-based first- and second-generation dendrons were grafted onto gold nanoparticles carrying azide groups under click reaction conditions. The nanoparticles decorated with the dendrons displayed liquid-crystalline properties and good thermal stability.     

Rapid assembly of matrix metalloprotease inhibitors using click chemistry

[reaction: see text] A panel of 96 metalloprotease inhibitors was assembled using "click chemistry" by reacting eight zinc-binding hydroxamate warheads with 12 azide building blocks. Screens of the bidentate compounds against representative metalloproteases provided discerning inhibition fingerprints, revealing compounds with low micromolar potency against MMP-7. The relative ease and convenience of the strategy in constructing focused chemical libraries for rapid in situ screening of MMPs is thereby demonstrated.     

Facile decoration of functionalized single-wall carbon nanotubes with phthalocyanines via "click chemistry"

We describe the functionalization of single-wall carbon nanotubes (SWNTs) with 4-(2-trimethylsilyl)ethynylaniline and the subsequent attachment of a zinc-phthalocyanine (ZnPc) derivative using the reliable Huisgen 1,3-dipolar cycloaddition. The motivation of this study was the preparation of a nanotube-based platform which allows the facile fabrication of more complex functional nanometer-scale structures, such as a SWNT-ZnPc hybrid. The nanotube derivatives described here were fully characterized by a combination of analytical techniques such as Raman, absorption and emission spectroscopy, atomic force and scanning electron microscopy (AFM and SEM), and thermogravimetric analysis (TGA). The SWNT-ZnPc nanoconjugate was also investigated with a series of steady-state and time-resolved spectroscopy experiments, and a photoinduced communication between the two photoactive components (i.e., SWNT and ZnPc) was identified. Such beneficial features lead to monochromatic internal photoconversion efficiencies of 17.3% when the SWNT-ZnPc hybrid material was tested as photoactive material in an ITO photoanode.     

Design and characterization of an electrochemical peptide-based sensor fabricated via"click" chemistry

We report an electrochemical peptide-based sensor fabricated via'click' chemistry for detection of anti-p24 antibodies. Our results also allude to a signaling mechanism similar to that of the linear probe electrochemical DNA sensor.     

Hydrophilic magnetic polymer latexes. 2. Encapsulation of adsorbed iron oxide nanoparticles

The encapsulation of seed polymer particles coated by anionic iron oxide nanoparticles has been investigated using N-isopropylacrylamide as a main monomer, N,N-methylene bisacrylamide as a crosslinking agent, itaconic acid as a functional monomer and potassium persulfate as an anionic initiator. The magnetic latexes obtained have been characterized with regard to particle size, iron oxide content and electrophoretic mobility. All these properties have been examined by varying several polymerization parameters: reaction medium, monomer(s) and crosslinking agent concentrations, nature of seed latexes and type of polymerization (batch versus shot process). The magnetic content in the polymer microspheres strongly depends on the polymerization procedure (i.e., encapsulation process) and varies between 6 and 23 wt%, and monodisperse magnetic polymer particles were obtained. Received: 28 December 1999 Accepted in revised form: 15 June 1999