Use of different buffers for detection and separation in determination of physio‐active components in oolong tea infusion by CZE with amperometric detection

With a view of simultaneous determination of physio‐active ingredients in oolong tea infusion: sugars, amino acids, epigallocatechin gallate and ascorbic acid, a novel CZE with amperometric detection method was studied. Operated in a wall‐jet configuration, 100 mmol/L NaOH was used in detecting cell to lead the electrocatalysis oxidation behaviors of the analytes on a 300 μm diameter copper‐disc electrode (working electrode), while in separating capillary, a mild alkaline running buffer consisting in a mixture of 30 mmol/L borate and 40 mmol/L phosphates charged and carried analytes to detecting end. The methodology research was performed for system stability and suitability. Under the optimal CE conditions, analytes could be separated within moderate time period. Good linearity between peak area and concentration existed over three orders of magnitude; lower RSD and LOD were achieved. The oolong tea infusion was assayed and result was satisfactory.     

Carbon paste-based electrochemical detectors for microchip capillary electrophoresis/electrochemistry

The first reported use of a carbon paste electrochemical detector for microchip capillary electrophoresis (CE) is described. Poly(dimethylsiloxane) (PDMS)-based microchip CE devices were constructed by reversibly sealing a PDMS layer containing separation and injection channels to a separate PDMS layer that contained carbon paste working electrodes. End-channel amperometric detection with a single electrode was used to detect amino acids derivatized with naphthalene dicarboxaldehyde. Two electrodes were placed in series for dual electrode detection. This approach was demonstrated for the detection of copper(II) peptide complexes. A major advantage of carbon paste is that catalysts can be easily incorporated into the electrode. Carbon paste that was chemically modified with cobalt phthalocyanine was used for the detection of thiols following a CE separation. These devices illustrate the potential for an easily constructed microchip CE system with a carbon-based detector that exhibits adjustable selectivity.     

Determination of mannitol and three sugars in Ligustrum lucidum Ait. by capillary electrophoresis with electrochemical detection

A method based on capillary electrophoresis with electrochemical detection has been developed for the separation and determination of mannitol, sucrose, glucose, and fructose in Ligustrum lucidum Ait. for the first time. Effects of several important factors such as the concentration of NaOH, separation voltage, injection time, and detection potential were investigated to acquire the optimum conditions. The detection electrode was a 300 μm diameter copper disc electrode at a working potential of +0.65 V (versus saturated calomel electrode (SCE)). The four analytes can be well separated within 13 min in a 40 cm length fused-silica capillary at a separation voltage of 12 kV in a 75 mM NaOH aqueous solution. The relation between peak current and analyte concentration was linear over about three orders of magnitude with detection limits (S/N = 3) ranging from 1 to 2 μM for all analytes. The proposed method has been successfully applied to monitor the mannitol and sugar contents in the plant samples at different growth stages with satisfactory assay results.     

Analysis of alkyl polyglucosides in industrial products by capillary electrophoresis with pulsed amperometric detection

Pulsed amperometric detection following micellar electrokinetic chromatography has been applied successfully to the direct detection of alkyl polyglucosides (APGs) in shampoos and other industrial products without prior conversion to highly absorbing or fluorescing derivatives. For electrochemical detection, it is necessary to dissociate the hydroxyl groups of the APGs. Thus, we used 0.1 M NaOH in the outlet vial to dissociate the APGs. The main problems associated with the combination of electrochemical detection and capillary electrophoresis are the need to isolate the detector from the electric field used in the capillary electrophoresis separation and the difficulty of aligning the working electrode with the end of the capillary. To overcome these problems, a simple capillary-electrode holder was constructed. This holder automatically aligns the capillary and the electrode in a wall-jet configuration without the aid of micropositioners and facilitates the replacement of electrodes and capillaries without reconstruction of the entire capillary/electrode setup. Special microcylindrical gold electrodes have been produced by sealing 300-μm-diameter gold wire into borosilicate-glass capillaries.     

Carbon-nanotube/copper composite electrodes for capillary electrophoresis microchip detection of carbohydrates

The preparation of carbon nanotube (CNT)/copper composite electrodes, based on co-mixing CNT and Cu powders within mineral oil, is described. The new composite electrode is used for improved amperometric detection of carbohydrates following their capillary electrophoresis (CE) microchip separations. The CNT/Cu composite electrode detector displays enhanced sensitivity compared to detectors based on copper or CNT alone. The marked catalytic action of the CNT/Cu composite material permits effective low potential (+0.5 V vs. Ag/AgCl) amperometric detection, and is coupled to the renewability, bulk modification and versatility advantages of composite electrodes. The CNT/Cu composite surface also leads to a greater resistance to surface fouling compared to that observed at the copper electrode. Factors affecting the electrocatalytic activity and the CE microchip detection are examined and optimized. The CNT/Cu composite electrode is also shown to be useful for the detection of amino acids as indicated from preliminary results. While the present work has focused on the enhanced CE microchip detection of carbohydrates and amino acids, the CNT/metal-composite electrode route should benefit the detection of other important groups of analytes.     

Determination of active ingredients of Rhododendron dauricum L. by capillary electrophoresis with electrochemical detection

High-performance capillary electrophoresis with electrochemical detection was employed to analyse active ingredients of Rhododendron dauricum L., an important crude herb frequently used in Chinese medicines. Farrerol, quercetin, syringic acid, vanillic acid, 4-hydroxybenzoic acid, protocatechuic acid are major important active ingredients. Operated in a wall-jet configuration, a 300-microm diameter carbon-disk electrode was used as the working electrode, which exhibits a good response at +950 mV (vs. saturated calomel electrodes) for six analytes. Under the optimum conditions, the analytes were baseline separated within 16 min in a borax buffer (pH 8.7). Notably, excellent linearity was obtained over two orders of magnitude with detection limits (S/N=3) ranged from 9 x 10(-7) to 3.0 x 10(-6) M for all analytes. This method was successfully used in the analysis of Rhododendron dauricum L. with relatively simple extraction procedures, and the assay results were satisfactory.     

Rapid determination of paeoniflorin and three sugars in Radix Paeoniae Alba by capillary electrophoresis.

A method based on capillary electrophoresis with electrochemical detection has been developed for the separation and determination of paeoniflorin, sucrose, glucose, and fructose in traditional Chinese medicine, Radix Paeoniae Alba. The effects of several important factors, such as the concentration of NaOH, the separation voltage, the injection time, and the detection potential, were investigated to determine the optimum conditions. The detection electrode was a 300-microm diameter copper disc electrode at a working potential of +0.60 V (versus SCE). The four analytes can be well separated within 8 min in a 40 cm length fused-silica capillary at a separation voltage of 12 kV in a 75 mM NaOH aqueous solution. The relation between the peak current and the analyte concentration was linear over about 3 orders of magnitude with detection limits (S/N = 3) ranging from 1 to 2 microM for all analytes. The proposed method has been successfully applied for the determination of the paeoniflorin and sugars in real plant samples with satisfactory assay results.     

A handy detection cell for end-column electrochemical detection in capillary electrophoresis.

A handy and simple detection cell was constructed using a mixing joint for end-column electrochemical detection in capillary electrophoresis (CE). The cell allows for positioning of the working electrode at the end of the separation capillary without the aid of micropositioners. The design facilitates the exchange of electrodes and capillaries without the need to refabricate the entire capillary-electrode setup. The cell can be assembled in a short period of time. Alignment with the joint screw proved to be reproducible for working electrodes of copper and gold. The advantages of reduced time and low cost make the device very attractive for the routine analysis of electroactive species, such as carbohydrates and their derivatives, purine bases and nucleosides, amino acids, and catecholamines etc. by CE with electrochemical detection.     

一种基于双工作电极-双通道的毛细管电泳电化学检测系统

报道了一种双工作电极-双通道毛细管电泳电化学检测系统，实现电导和安培 同时检测或者安培与安培检测联用，使两种方法相互补充，发挥各自的优势。其中 ，工作电极与检测池的制作工艺简单，操作简便，通过不锈钢针管和毛细管作为套 管，无需三维微调装置即可简单实现双工作电极的准确放置及分离毛细管与工作电 极的准确对接，并根据分析体系的需要采用不同类型的工作电极和检测器；同时采 用复式滤波电路解决了不同检测器之间的电场叠加对输出信号的干扰问题。采用该 装置可以同时检测复杂体系中的电活性和惰性物质，或同时测定只能氧化或只能还 原的物质，还可以对具有氧化还原性质的物质进行纯度的确证。将该装置应用于实 际样品的测定，节约了分析时间，提高了分析速度，扩大了检测范围，结果令人满 意。     

毛细管电泳-柱端安培检测测定莲子心中荷叶碱、芦丁和金丝桃甙的含量

采用毛细管电泳-柱端安培检测测定莲子心中荷叶碱、芦丁和金丝桃甙的含量．研究了检测电位、运行缓冲液浓度和pH值,分离电压和进样时间对分离和检测的影响．以微碳圆盘电极（Ф=0.5ram）为工作电极,检测电位为＋0．95V（vs．Ag／AgCl）,pH为7．25的50mmol／L Na2B4O7和100mmol／L NaH2PO4缓冲液为运行液,当分离电压为15kV时,3种分析物在15min内完全分离．荷叶碱、芦丁和金丝桃甙的检出限（S／N=3）分别为0．02μg／mL、0．05μg／mL和0．04μg／mL．该方法已成功地应用于莲子心中上述3种活性成分的测定．     

Application of a novel micro-injector in the determination of indole derivatives in the rat pineal gland by capillary electrophoresis with electrochemical detection

A novel micro-injector has been fabricated for capillary electrophoresis (CE). It was successfully used for the determination of some indole derivatives for example melatonin (MT), serotonin (5-HT), tryptophan (Trp), and 5-hydroxy-tryptophane (5-HTrp) in the rat pineal gland by capillary electrophoresis with electrochemical detection (CE–EC). CE was performed in 0.20 mol L^–1 phosphate buffer (pH 8.0). The compounds investigated can be well separated and detected within 15 min. The working electrode used was a 300-μm diameter carbon electrode positioned opposite the outlet of the capillary. The relationship between peak current and analyte concentration was highly linear in the range from 0.10 to 500 μmol L^–1; detection limits (S/N = 3) were 0.03–0.13 μmol L^–1. The proposed method has been successfully used to analyze real biological samples.     

柱前衍生毛细管电泳-电化学检测组胺

本文采用邻苯二甲醛（OPA）为柱前衍生化试剂,用毛细管电泳-电化学检测（CE—ED）法测定酱油中组胺的含量。以直径300μm的碳圆盘电极为工作电极,50mmol／L硼砂（pH8．7）为运行缓冲液,对组胺和组氨酸的分离检测条件进行优化。在优化条件下,组胺和组氨酸二组分可在12min内完全分离,检出限分别为7．5×10^-7g／mL和5．0×10^-4g／mL。该方法已经成功用于实际样品的检测。     

Determination of baicalein, baicalin and quercetin in Scutellariae Radix and its preparations by capillary electrophoresis with electrochemical detection

A method based on capillary electrophoresis with electrochemical detection (CE-ED) was developed for the determination of baicalein, baicalin and quercetin in Scutellariae Radix and its pharmaceutical preparations. The effects of some important factors such as the acidity and concentration of running buffer, separation voltage, injection time, and the potential of working electrode were investigated to acquire the optimum condition. The working electrode was a 300-mum diameter carbon disc electrode positioned opposite the outlet of capillary. The three analytes could be well separated within 12 min in a 40 cm length capillary at the separation voltage of 12 kV in a 100 mmol l(-1) borate buffer (pH 9.0). The response was linear over three orders of magnitude with detection limits (S/N=3) ranged from 0.224 to 0.548 mumol l(-1) for all three analytes. This proposed method demonstrated good long-term stability and reproducibility with R.S.D. of less than 5% for both migration time and peak current (n=7). It has been successfully applied to analyze the actual samples with satisfactory assay results.     

毛细管电泳-电化学检测法测定黄芪及其制剂中的活性成分

采用毛细管电泳-电化学检测法(CE-ED)对中药黄芪的主要活性成分芦丁、阿魏酸、香草酸、绿原酸、槲皮素和咖啡酸进行了分离和测定。分别考察了工作电极电位、运行缓冲液的pH值和浓度、分离电压和进样时间等实验参数对实验结果的影响。在优化的实验条件下,以直径300 μm的碳圆盘电极为工作电极,检测电位为+0.95 V(相对于饱和甘汞电极),在10 mmol/L硼酸盐(pH 8.2)的运行缓冲溶液中,上述6种活性成分能在17 min内实现很好的基线分离,被测物浓度与峰电流在3个数量级范围呈良好的线性关系,检出限(S/N=3)范围为78～110 μg/L。在不同的加标水平下,6种活性成分的平均回收率为96.0%～103.0%,相对标准偏差为1.9%～3.6%(n=3)。该方法样品处理简单,无需预富集,已应用于实际样品的分析,并获得了令人满意的结果。     

新型芯片电泳柱端安培检测系统的构建与评价

自行设计开发了一套便于与电泳芯片集成的一体式柱端安培检测池系统．该系统由整块透明有机玻璃精密加工而成,包括电泳芯片支架和安培检测池两部分,芯片可通过芯片插槽和不锈钢夹具固定在芯片支架上,各种检测用电极可直接通过螺母固定在安培检测池中．以100μmol／L的DA为模式分析物,分别采用直径为100、300和500μm的铂金圆盘电极与表观直径为240μm的碳纤维电极作为工作电极均在该装置上实现了良好组装和高灵敏检测．采用碳纤维工作电极对该系统的检测参数进行了优化．测试结果表明该系统在电化学清洗程序下连续六次测定100μmol／L多巴胺的峰电流相对标准偏差为3．2％,保留时间相对标准偏差为0．5％,DA的检测限为0．4μmol／L（按照S／N=3计）．该系统体积小巧,测试稳定,检测灵敏度较高,工作电极更换方便,适合作为芯片电泳柱端安培检测通用平台．     

Determination of liquiritigenin and isoliquiritigenin in Glycyrrhiza uralensis and its medicinal preparations by capillary electrophoresis with electrochemical detection

A simple, reliable, reproducible and sensitive method, based on capillary electrophoresis with electrochemical detection (ED), for the determination of liquiritigenin and isoliquiritigenin in Glycyrrhiza uralensis and its medicinal preparations was described. Operated in a wall-jet configuration, a 300 microm diameter carbon-disk electrode was used as the working electrode, which exhibits good responses at + 1000 mV (versus SCE) for the two analytes. Under the optimum conditions, the analytes were base-line separated within 8 min, and excellent linearity was obtained in the concentration range from 5.0 x 10(-4) to 1.0 x 10(-6) mol/l. The detection limit (S/N = 3) was 4.7 x 10(-7) and 2.9 x 10(-7) mol/l for liquiritigenin and isoliquiritigenin, respectively. This work provides a useful method for the analysis of traditional Chinese medicines.     

Determination of Active Ingredients of Hawthorn by Capillary Electrophoresis with Electrochemical Detection

A method based on capillary electrophoresis with electrochemical detection has been developed for the separa-tion and determination of epicatechin,kaempferol,chlorogenic acid,4-hydroxybenzoic acid,quercetin and proto-catechuic acid in hawthorn for the first time.The effects of working electrode potential,pH and concentration ofrunning buffer,separation voltage and injection time on CE-ED were investigated.Under the optimum conditions,the analytes could be separated in a 60 mmol·L~(-1) borate buffer(pH 8.7)within 21 min.A 300 μm diameter carbondisk electrode has a good response at 0.95 V(vs.SCE)for all analytes.The response was linear over three ordersof magnitude with detection limits(S/N=3)ranging from 3×10~(-8) to 2×10~(-7) g·mL~(-1) for the analytes.The methodhas been successfully applied to the analysis of real sample,with satisfactory results.     

Determination of Bioactive Flavonoids in Rhododendron Dauricum L. by Capillary Electrophoresis with Electrochemical Detection

A method based on capillary electrophoresis with electrochemical detection (CE-ED) has been developed for the determination of bioactive flavonoids in the traditional Chinese herbal medicine, Rhododendron dauricum L. The effects of working electrode potential, pH and concentration of running buffer, separation voltage and injection time on CE-ED were investigated. Under the optimum conditions, the analytes could be separated in a 70 mmol L^?1 borate buffer (pH=9.2) within 20 min. A 300 μm diameter carbon disk electrode has a good response at + 0.90 V (vs. SCE) for all analytes. The response was linear over three orders of magnitude with detection limits (S/N = 3) ranging from 2 × 10^?8 g mL^?1 to 2 × 10^?7 g m^?1 for the analytes. The method has been successfully applied for the analysis of real sample, with satisfactory results.     

Nanoband electrode for high-performance in-channel amperometric detection in dual-channel microchip capillary electrophoresis

A nanoband electrode detector integrated with a dual-channel polydimethylsiloxane microchip is proposed for in-channel amperometric detection in microchip capillary electrophoresis. Gold nanoband electrodes, which were fabricated on SU-8 substrates with a 100-nm-width gold layer, were introduced into the dual-channel microchip to be an electrochemical detector. Due to the nano-sized width of the detector, the noise of the amperometric detection was significantly reduced, and a high separation resolution was achieved for monitoring the analytes. The detection sensitivity of the system was improved by high signal-to-noise ratio, and a low detection limit on microchip was obtained for p-aminophenol (2.09 nM). Because of the high resolution in measuring half-peak width, the plate number that is used to evaluate the separation efficiency was 1.5-fold higher than that using 50-μm-width electrochemical detector. The effect of sample injection time and data acquisition time on separation efficiency was investigated, and an attractive separation efficiency was achieved with a plate number up to 17,500.     

毛细管电泳多道电化学检测器的研制及其应用

报道了毛细管电泳多道电化学检测器的研制及其应用，安培检测器和电导检测器并联在同一毛细管电泳检测系统中，在同一缓冲体系，同一工作电极下对同一复杂的分析体系同时进行电导和安培检测；整个装置综合了电导检测和安培检测两种检测器的优点，性能优良，造价低廉，对实际样品的检测取得了令人满意的结果。