Synthesis and characterization of microcrystalline cellulose produced from bacterial cellulose

In this study, microcrystalline cellulose (MCC) was prepared from the acid hydrolysis of bacterial cellulose (BC) produced in culture medium of static Acetobacter xylinum. The MCC-BC produced an average particle size between 70 and 90 μm and a degree of polymerization (DP) of 250. The characterization of samples was performed by thermogravimetric analysis, X-ray diffraction, and scanning electron microscopy (SEM). The MCC shows a lower thermal stability than the pristine cellulose, which was expected due to the decrease in the DP during the hydrolysis process. In addition, from X-ray diffractograms, we observed a change in the crystalline structure. The images of SEM for the BC and MCC show clear differences with modifications of BC fiber structure and production of particles with characteristics similar to commercial MCC.     

Structural modification of bacterial cellulose

The microfibrillar nature of bacterial cellulose produced by Acetobacter was modified by various chemical reagents in a culture medium. The chemical reagents included antibiotics to inhibit cell division or certain protein synthesis, and reducing reagents that induce reductive cleavage of disulfide bonds in proteins. Among the reagents tested, nalidixic acid and chloramphenicol induced elongation of bacteria, resulting in the formation of wider cellulose ribbons or aggregates of ribbons. The Young's modulus of the sheets made from such cellulose increased, while dithiothreitol, which produced ribbons having only 45% of the width of the control, produced sheets with undiminished Young's modulus. Although further study is necessary to clarify the effect of such modifications, nalidixic acid and chloramphenicol produced a bacterial cellulose with superior mechanical properties.     

Structural investigations and modeling of cavities in clathrates

Summary A molecular-graphics study has been performed in order to build and visualize the shape of cavities within different clathrates from X-ray diffraction data [e.g. Dianin's compound, Werner complexes Ni(SCN)₂(3-methylpyridine)₄, Fe(acetylacetonate)₃ and Ni(ethylxanthate)₂(4,4-dimethyl-2,2-bipyridyl) complexes]. The algorithm of the solvent-accessible surfaces representation has been applied to a part of the whole crystal structure rather than to isolated host molecules, by using the MOLCAD molecular modeling package. This type of modelization has been found very efficient both to study the shape properties of the host cavities (cage or channel types) and to approach the structural features of the host/guest interactions.     

Structural investigations of alumino-metalloaminocarbene complexes

[Al(NMe₂)₃]₂ combines with Fe(CO)₅ and Mn₂(CO)₁₀ forming bimetallic compounds Fe₂(CO)₈[C(NMe₂)OAl(NMe₂)₂]₂ and Mn₂(CO)₉[C(NMe₂)OAl₂-(NMe₂)₅]. X-ray diffraction analyses reveal the formation of aluminometallocarbene compounds with central connectivities, MC[NMe₂)][OAl(NMe₂)(μ-NMe₂)₂].     

Structural investigations of silicon-rich CVD-SiC

Silicon Carbide (SiC) and Silicon Carbide with free Silicon [SiC(Si)] thin films were prepared by chemical vapor deposition (CVD) using an CH₃SiCl₃-H₂-Ar gas mixture at temperatures of 1173 to 1323 K. The structure of these films were investigated by scanning electron microscopy (SEM) and X-ray diffractometry (XRD). The effects of crystallinity, morphology and Si-concentration of the deposits were examinated in some detail.     

Structural investigations of lead-strontium fluoroapatites

Solid solutions in the system Pb_(10−x)Sr_x(PO₄)₆F₂, 0?x?10, were obtained as apatitic phases from aqueous medium. They were investigated by X-ray diffraction, chemical analysis and infrared (IR) spectroscopy. The results of the structural refinements indicated that the substitution of lead by strontium induces a regular decrease of the lattice constant “a” and a preferential strontium distribution in site M(1). A progressive shift of the F⁻ ion position along the apatitic channel was detected and confirmed by IR evidence. The different character of the M-F and M-O interactions was invoked to justify the structural differences observed as a function of composition.     

Structural evolution in microbial polyesters

The crystallization behavior of microbially synthesized poly(3-hydroxybutyrate) (PHB) and its copolymers [P(HB-co-HHx)] containing 2.5, 3.4, and 12 mol % 3-hydroxyhexanoate (HHx) comonomer and the melting of the resultant crystals were studied in detail using time-resolved small-angle X-ray scattering and differential scanning calorimetry. The polyesters were found to undergo primary crystallization as well as secondary crystallization. In the primary crystallization, the thicknesses of the lamellar crystals were sensitive to the crystallization temperature, but no thickening was observed throughout the entire crystallization at a given temperature. The thickness of the lamellar crystals in the PHB homopolymer was always larger than that of the amorphous layers. In the copolymers, by contrast, the randomly distributed HHx comonomer units were found to be excluded from the lamellar crystals into the amorphous regions during the isothermal crystallization process. This interrupted the crystallization of the copolymer chains, resulting in the formation of lamellar crystals with thicknesses smaller than those of the amorphous layers. The lamellar crystals in the copolymers had lower electron densities compared to those formed in the PHB homopolymer. On the other hand, secondary crystallization favorably occurred during the later stage of isothermal crystallization in competition with the continuous primary crystallization, forming secondary crystals in amorphous regions, in particular in the amorphous layers between the primarily formed lamellar crystal stacks. Compared to the primarily formed lamellar crystals, the secondary crystals had short-range-ordered structures of smaller size, a broader size distribution, and a lower electron density.     

高效液相色谱中乙基纤维素手性固定相研究

对映异构现象广泛存在于自然界中,由于对映异构体分子之间具有不同的光学性能和生物活性,因而外消旋体的拆分在药学和生物学等领域具有十分重要的意义.在手性拆分中,高效液相色谱是最普遍使用的方法之一,而其中又以手性固定相法最为常用[1].在众多手性固定相中,各种多糖及其衍生物,特别是纤维素和直链淀粉的衍生物因具有很好的手性识别能力而得到了广泛研究[2-3].但到目前为止,我们还未见乙基纤维素手性固定相的报道.本文制备了乙基纤维素手性固定相,并在正相、反相以及极性有机溶剂的流动相条件下,对15种手性化合物的拆分情况进行了探究,其中9种得到了不同程度的分离,研究结果表明该手性固定相具有较好的手性拆分能力.     

Thermal behavior of cellulose acetate produced from homogeneous acetylation of bacterial cellulose

Cellulose acetate (CA) is one of the most important cellulose derivatives and its main applications are its use in membranes, films, fibers, plastics and filters. CAs are produced from cellulose sources such as: cotton, sugar cane bagasse, wood and others. One promissory source of cellulose is bacterial cellulose (BC). In this work, CA was produced from the homogeneous acetylation reaction of bacterial cellulose. Degree of substitution (DS) values can be controlled by the acetylation time. The characterization of CA samples showed the formation of a heterogeneous structure for CA samples submitted to a short acetylation time. A more homogeneous structure was produced for samples prepared with a long acetylation time. This fact changes the thermal behavior of the CA samples. Thermal characterization revealed that samples submitted to longer acetylation times display higher crystallinity and thermal stability than samples submitted to a short acetylation time. The observation of these characteristics is important for the production of cellulose acetate from this alternative source.     

键合型邻乙酰水杨酸纤维素酯手性固定相的合成及应用

将邻乙酰水杨酸纤维素酯通过间隔臂--2-（3,4-环氧环己基）乙基三甲氧基硅烷键合于硅胶之上,制得键合型手性固定相CSP1,考察了其与同类纤维素衍生物制得的涂敷型手性固定相在拆分效果方面的异同,并探讨了其差异的原因与机理。为了印证间隔臂中环己基对于手性拆分的作用,本文又将CSP1与间隔臂中不具有环己基的键合型手性固定相CSP2进行了拆分对比,进一步证实了间隔臂中环己基的作用。结果表明,键合型手性固定相相比涂敷型固定相在拆分咪唑类药物方面具有优势,这种优势一方面来自于流动相范围的扩大,另一方面是由于间隔臂中环己基对纤维素表面结构的修饰作用。     

Electrodynamic investigations of conduction processes in humid microcrystalline cellulose tablets

The conduction mechanism in microcrystalline cellulose (MCC) tablets at varying relative humidity (RH) has been investigated by using the techniques of low frequency dielectric spectroscopy and transient current analysis at room temperature. The dependence on RH on the measured conductivity and charge carrier density indicates that a high-power-law-exponent percolation process of cations being conducted on water molecules occupying available 6-OH units on the cellulose chains is the dominating dc conduction mechanism at RH below 3 wt % of moisture content. The experimentally observed decrease in charge carrier mobility with increasing moisture content shows that protons and H3O+ ions that are being blocked at empty 6-OH sites also contribute to the charge transport process in cellulose at low moisture contents.     

All-cellulose nanocomposite fibers produced by melt spinning cellulose acetate butyrate and cellulose nanocrystals

Bio-based continuous fibers were prepared by melt spinning cellulose acetate butyrate (CAB), cellulose nanocrystals (CNC) and triethyl citrate. A CNC organo-gel dispersion technique was used and the prepared materials (2 and 10 wt% CNC) were melt spun using a twin-screw micro-compounder and drawn to a ratio of 1.5. The microscopy studies showed that the addition of CNC in CAB resulted in defect-free and smooth fiber surfaces. An addition of 10 wt% CNC enhanced the storage modulus and increased the tensile strength and Young’s modulus. Fiber drawing improved the mechanical properties further. In addition, a micromechanical model of the composite material was used to estimate the stiffness and showed that theoretical values were exceeded for the lower concentration of CNC but not reached for the higher concentration. In conclusion, this dispersion technique combined with melt spinning can be used to produce all-cellulose nanocomposites fibers and that both the increase in CNC volume fraction and the fiber drawing increased the mechanical performance.     

Theoretical investigations on the structure and physical properties of cellulose

The structure of cellulose is investigated using a recently derived force field. Published experimental data is taken only as a starting point for purely theoretical investigations. The reliability of the method is validated by calculating physical properties of the obtained geometries. In the course of the investigations, the geometries of cellulose Iα, cellulose Iβ and cellulose II are derived. For these geometries the Young's-modulus is calculated. The structure of cellulose in aqueous solution is investigated, using cellohexaose (a hexamer of β-D -glucose) as a fragment of a cellulose chain. Here, the diffusion coefficient is calculated.     

(3,5-二甲基苯基氨基甲酸酯)衍生的纤维素手性固定相

纤维素三（3,5-二甲基苯基氨基甲酸酯）是液相色谱中使用最广泛的手性柱。该文详细地研究了不同程度衍生的纤维素（3,5-二甲基苯基氨基甲酸酯）以及不同硅胶（粗制硅胶、氨丙基粗制硅胶、精制硅胶、氨丙基精制硅胶、大孔硅胶、氨丙基大孔硅胶）作为支撑体对该柱手性分离能力的影响。自制了13根手性色谱柱,分别考察了其对16种外消旋体的拆分,分离结果显示：三取代纤维素柱 > 二取代纤维素柱 > 纤维素柱;精制硅胶和大孔硅胶优于粗制硅胶,大孔硅胶的柱压更低;硅胶的氨丙基化对手性选择性有一定的影响;这些手性柱之间具有一定的互补性,尤其是纤维素柱。该文有助于人们更深刻地理解和更好地把握高效液相色谱手性柱的制备。     

Dynamic mechanical investigations of different substituted cellulose o-silyl ethers

In contrast to many cellulose derivatives, the cellulose O-silyl ethers with bulky side groups exhibit scarcely a change in glass transition temperature by a variation of the degree of substitution (DS) or degree of polymerization (DP) or by introducing phenyl carbamate groups for the remaining hydroxyls along the main chain. However, a substitution of these hydroxyls by flexible acetate groups lowers the glass transition temperature considerably. The secondary dispersion (relaxation) behavior is strongly influenced by the various substituents and can be correlated to specific motions of the molecules. The dynamic mechanical properties are also dependent on the kind of preconditioning of the samples.     

Structural and mechanical anisotropy in rheotactically aligned bacterial cellulose

Cellulose - In this work, we demonstrate the preparation of oriented bacterial cellulose from Komagataeibacter sucrofermentans by rheotactic growth in a simple and adaptable setup. The resulting...     

13C CPMAS NMR investigations of cellulose polymorphs in different pulps

In order to obtain information about the crystallinity and polymorphs of cellulose, and the occurrence of hemicelluloses in pulp fibers, wood cellulose, bacterial cellulose, cotton linters, viscose, and celluloses in different pulps were investigated by solid state ¹³C CPMAS NMR spectroscopy. A mixed softwood kraft pulp and a dissolving-grade pulp were treated under strongly alkaline and acidic conditions and the effect on cellulose crystallinity was studied. The presence of different crystalline polymorphs of cellulose and the amounts of hemicelluloses are considered.     

Length-controlled cellulose nanofibrils produced using enzyme pretreatment and grinding

The length of cellulose nanofibrils (CNFs) is a significant parameter for various applications. The goal of this research was to employ a fabrication method to produce length-controlled CNFs; the chosen technique was enzy-grinding (enzyme pretreatment followed by mechanical grinding). Here, we presented the results of the optimization of the diameter and length, the characterization of the properties of CNFs and nanofilms prepared using these fibrils. The cellulose morphology, crystallinity index (CrI), chemical structure, and thermal stability were investigated as functions of the enzyme loading and hydrolysis time. The results showed that enzy-grinding could effectively reduce the diameter and length of cellulose fibrils. The average diameter was about 8.6 ± 3.6 nm, and the length could be controlled over the range from 0.76 ± 0.38 μm to ≥ 4 μm (i.e. aspect ratios from 43 to ≥ 328). After the grinding process, the CNFs maintained high thermal stability and no change in the chemical structure compared to the original pulp. The transmittance and mechanical properties of the CNF films were strongly dependent on the fibril length. The fabrication of length-controlled CNFs using the enzy-grinding process is meaningful and significant research which could be relevant to the optimization of such materials for various applications.     

Thermoanalytical investigations of some industrial wastes produced in steel works

The experiments involves three types of industrial wastes produced by iron works, which create serious hazards to the natural environment: (1) paint-shop sludge, (2) oil-polluted diatomite, and (3) oil-polluted scale. The choice of an appropriate and safe storage method should be based on extensive physicochemical examination.DTA, in combination with other data, allows characterization of the combustible properties of wastes. Thermoanalytical measurements were carried out in a dynamic air atmosphere. Enthalpy values were calculated from peak areas of DTA curves. Thermoanalytical data were compared with calorimetric results obtained with an oxygen bomb.

---

Zusammenfassung Drei Arten industrieller Abtälle eines Stahlwerks, die schwere Umweltbelastungen darstellen, wurden untersucht: (1) Lackiererei-Schlamm, (2) ölhaltiger Diatomit, (3) ölhaltiger Kesselstein. Geeignete sichere Deponien setzen ausführliche physikalisch-chemische Untersuchungen voraus. DTA in Kombination mit anderen Untersuchungen erlaubt die Charakterisierung der Verbrennungseigenschaften der Abfälle. Die thermoanalytischen Untersuchungen erfolgten im Luftstrom, die Verbrennungswärmen wurden aus den DTA-peak-Flächen berechnet. Die Ergebnisse werden mit denen kalorimetrischer Messungen in einer Sauerstoffbombe verglichen.

---

- , . , . , - . . . . , .