Poly（dimethylsiloxane） Microchips with Two Sharpened Stretching Tips and Its Application to Protein Separation Using Dynamic Coating

An integrated poly（dirnethylsiloxane） （PDMS） microchip with two sharpened stretching tips for convenient sample injecting, running buffer refreshing and channel cleaning has been presented. The sample was directly introduced into the separation channel through the stretching inlet tip without complicated power switching supplies and injection cross channel. The operation of running buffer refreshing or channel cleaning was simplified by vacuuming one end of the tip and placing the other tip into the solution vial. Therefore, this fabrication method can be easily applied to most analytical laboratories economically without soft lithography and plasma bonding equipments. The attractive performance of the novel PDMS microchips has been demonstrated by using laser-induced fluorescence detection for separation of proteins. The addition of 0.04% Brij 35 in 0.04 mol/L phosphate buffer （pH 7.0） can reduce the adhesion of proteins in multienzyme tablet and make separation more easily. The electroosmotic flow （EOF） exhibits pH-independence in the range of 3-1 1 in dynamic modified microchannel.     

Fabrication of low-melting-point alloy microelectrode and monolithic spray tip for integration of glass chip with electrospray ionization mass spectrometry

In this paper, a glass microchip-based emitter with a low-melting-point alloy (LMA) microelectrode and a monolithic tip for electrospray ionization mass spectrometry (ESI-MS) was described. So far, the fabrication of metal microelectrode achieving direct electrical contact in the microchannel of glass chip is still a challenge. A novel fabrication approach for LMA microelectrode in the glass chip was developed to achieve direct electrode-solution electrical contact in the microchannel. An electrode channel and a sample channel were firstly fabricated on a glass chip with a micropore connecting the two channels. The melted LMA was filled into the electrode channel under a pressure of ca. 100 kPa, forming a stable and nicely fitted interface at the micropore between the sample and the electrode channels due to surface tension effect. The melted LMA filled in the electrode channel was then allowed to solidify at room temperature. The channel geometries including the distance between the sample and the electrode channels on the mask and the turning angle of the electrode channel were optimized for fabricating the LMA electrode. In this work, an improved fabrication approach for monolithic emitter tip based on pyramid-shaped tip configuration and stepped grinding method was also developed to fabricate well-defined sharp tips with a smallest tip end size of ca. 15 μm × 50 μm. Two types of emitter tip end including puncher-shaped tip and fork-shaped tip were produced. The emitter with the fork-shaped tip showed better working stability (4.4% RSD, TIC) at nanoliter-scale flow rate of 50 nL/min. The fabrication approaches for the LMA microelectrode and emitter tip are simple and robust, and could be carried out in most of routine laboratories without the need of complicated and expensive instruments. The performance of the emitter was evaluated in the analysis of reserpine, angiotensin II and myoglobin. A continuous experiment over 6 h demonstrated good stability of the present system in long-term analysis.     

膜片电极支撑自组装双层脂膜中短杆菌肽离子通道的形成

通过一个两步程序在膜片电极尖端形成自组装双层脂膜：（1）膜片电极尖端沾取成膜液；（2）将吸附成膜液的尖端浸入电解液中，排除尖端多余的成膜液，通过电学方法监测双层脂膜的形成。将短杆菌肽通道蛋白分散在成膜液和电解质溶液中，在制备膜片电极支撑双层脂膜过程中，短杆菌肽重组到双层脂膜中形成离子通道，对通道的一般特性进行了研究，并观察到通道开放和关闭的现象。     

Single-molecule chemistry and analysis: mode-specific dehydrogenation of adsorbed propene by inelastic electron tunneling

A single propene molecule, located in the junction between the tip of a scanning tunneling microscope (STM) and a Cu(211) surface can be dehydrogenated by inelastic electron tunneling. This reaction requires excitation of the asymmetric C-H stretching vibration of the ═CH(2) group. The product is then identified by inelastic electron tunneling action spectroscopy (IETAS).     

Design and numerical simulation of a DNA electrophoretic stretching device

DNA stretching is now a key technology in emerging DNA mapping devices such as direct linear analysis (DLA), though DNA stretching in a high throughput manner is still a challenging problem. In this work, we present a new microfluidic channel design to enhance DNA stretching using kinematic analysis and Brownian dynamics-finite element method (BD-FEM). Our group recently showed in experiments that the extensional electrophoretic field arising from a hyperbolic microcontraction can be utilized to stretch T4-DNA. We demonstrate the reliability of our BD-FEM model for the present problem by showing that the numerical predictions are consistent with the experimental data for the hyperbolic channel. We then investigate DNA stretching for four different funnel shapes. Surprisingly the maximum mean DNA stretch is quite similar in all four designs. Finally, we propose a new design with a side-feeding branch to enhance stretching based on a kinematic analysis along different feeding locations. Our numerical simulation predicted that DNA stretching can be dramatically enhanced using side-feeding.     

Four-mode quantum calculations of resonance states in complex-forming bimolecular reactions: C- + CH3Br

The vibrational resonance states of the complexes formed in the nucleophilic bimolecular substitution (S(N)2) reaction Cl(-)+CH(3)Br-->ClCH(3)+Br(-) were calculated by means of the filter diagonalization method employing a coupled-cluster potential-energy surface and a Hamiltonian that incorporates an optical potential and is formulated in Radau coordinates for the carbon-halogen stretching modes. The four-dimensional model also includes the totally symmetric vibrations of the methyl group (C-H stretch and umbrella bend). The vast majority of bound states and many resonance states up to the first overtone of the symmetric stretching vibration in the exit channel complex have been calculated, analyzed, and assigned four quantum numbers. The resonances are classified into entrance channel, exit channel, and delocalized states. The resonance widths fluctuate over six orders of magnitude. In addition to a majority of Feshbach-type resonances there are also exceedingly long-lived shape resonances, which are associated with the entrance channel and can only decay by tunneling. The state-selective decay of the resonances was studied in detail. The linewidths of the resonances, and thus the coupling to the energetic continuum, increase with excitation in any mode. Due to the strong mixing of the many progressions in the intermolecular stretching modes of the intermediate complexes, this increase as a function of the corresponding quantum numbers is not monotonic, but exhibits pronounced fluctuations.     

Electroosmotically driven solution mixing in borosilicate theta glass nESI emitters

The use of borosilicate theta glass capillaries as nanoelectrospray ionization emitters has recently been demonstrated as a method for mixing two solutions as they are sprayed into the mass spectrometer for analysis. All previous experiments resulted in a solution mixing timescale limited to the time the analytes spend in the Taylor cone and subsequent droplets (i.e. sub‐millisecond timescale). In an effort to extend the solution mixing timescale to the milliseconds regime, we demonstrate that solution can be moved from one channel of the theta tip to the opposite channel via electroosmosis by applying a potential difference between the two wire electrodes inserted into each channel of the theta tip. First, we establish that electroosmosis is responsible for solution movement using fluorescence microscopy to track fluorescent tracer dyes. We then demonstrate the utility of this technique in varying the extent of denaturation of holomyoglobin to apomyoglobin on the millisecond timescale just prior to analysis by mass spectrometry. Finally, we induce additional turbulence for better mixing by applying a square wave potential to one of the wire electrodes while holding the opposite wire at a constant voltage between the low and high potentials of the square wave. This experiment was found to provide nearly complete mixing after a single cycle of the square wave. The use of electroosmosis significantly expands the flexibility of theta tips for altering solutions prior to nESI without the need for off‐line sample manipulation. Copyright © 2015 John Wiley & Sons, Ltd.     

Fast and simple sample introduction for capillary electrophoresis microsystems

A newly designed capillary electrophoresis (CE) microchip with a simple and efficient sample introduction interface is described. The sample introduction is carried out directly on the separation channel through a sharp inlet tip placed in the sample vial, without an injection cross, complex microchannel layouts or hardware modification. Alternate placement of the inlet tip in vials containing the sample and buffer solutions permits a volume defined electrokinetic sample introduction. Such fast and simple sample introduction leads to highly reproducible signals with no observable carry over between different analyte concentrations. The performance of the system was demonstrated in flow-injection and CE measurements of nitroaromatic explosives and for on-chip enzymatic assays of glucose in the presence of ascorbic acid. Employing an 8 cm long separation channel and a separation voltage of 4000 V it offers high-throughput flow-injection assays of 100 samples h(-1) with a relative standard deviation of 3.7% for TNT (n= 100). Factors influencing the analytical performance of the new microchip have been characterized and optimized. Such ability to continuously introduce discrete samples into micrometer channels indicates great promise for high-speed microchip analysis.     

Microbubble generation in a co-flow device operated in a new regime

A new regime of operation of PDMS-based flow-focusing microfluidic devices is presented. We show that monodisperse microbubbles with diameters below one-tenth of the channel width (here w = 50 μm) can be produced in low viscosity liquids thanks to a strong pressure gradient in the entrance region of the channel. In this new regime bubbles are generated at the tip of a long and stable gas ligament whose diameter, which can be varied by tuning appropriately the gas and liquid flow rates, is substantially smaller than the channel width. Through this procedure the volume of the bubbles formed at the tip of the gas ligament can be varied by more than two orders of magnitude. The experimental results for the bubble diameter d(b) as function of the control parameters are accounted for by a scaling theory, which predicts d(b)/w ∝ (μ(g)/μ(l))(1/12)(Q(g)/Q(l))(5/12), where μ(g) and μ(l) indicate, respectively, the gas and liquid viscosities and Q(g) and Q(l) are the gas and liquid flow rates. As a particularly important application of our results we produce monodisperse bubbles with the appropriate diameter for therapeutic applications (d(b) ? 5 μm) and a production rate exceeding 10(5) Hz.     

HXeBr分子的振动频率和离解途径的理论研究

采用MP2和CCSD(T)方法对HXeBr分子的振动光谱进行了理论研究. 计算结果表明, 经非谐性和基质效应修正后的H—Xe伸缩振动、弯曲振动以及Xe—Br伸缩振动频率分别为1492, 509和174 cm-1, 与实验结果吻合得较好. 此外分别采用单参考组态的CCSD(T)方法和多参考组态耦合簇(MR-AQCC)方法研究了HXeBr分子的稳定性和离解途径. 研究结果表明, 离解途径HXeBr→Xe＋HBr和HXeBr→H＋Xe＋Br的能垒分别为1.39和0.89 eV, 三体离解途径是HXeBr分子的主要离解途径.     

Enhancing separation in short‐capillary electrophoresis via pressure‐driven backflow

We present a novel easy‐to‐operate and efficient method to improve the separation efficiency in short‐capillary electrophoresis by introducing steady backflow to counterbalance electro‐osmotic flow without the use of any external pressure. The backflow was easily generated by tapering the capillary end, which was achieved by heating a straight capillary and stretching it with a constant force. We investigated the net fluidic transport rate under different tip lengths and separation voltages. Good run‐to‐run repeatability and capillary‐to‐capillary reproducibility of the present method were obtained with RSD less than 1.5%, indicating the stability of the fluid transport rate in the tapered capillary, which ensures the quantification and repeatability of capillary zone electrophoresis (CZE) analysis. Enhanced separation of the tapered short capillary electrophoresis was demonstrated by CZE analyzing amino acids and positional isomers. Baseline separations were achieved in less than 60 s using a tapered capillary with the effective length of 5 cm, while no separation was achieved using a normal capillary without a tapered tip. The present study provides a promising method to use pressure‐driven backflow to enhance separation efficiency in short‐capillary electrophoresis, which would be of potential value in a wide application for fast analysis of complex samples.     

Photodissociation dynamics of HN3 and DN3 at 157 nm

Photodissociation dynamics of HN 3 at 157.6 nm have been studied using the H-atom Rydberg tagging time-of-flight technique. Product translational energy distributions and angular distributions have been measured. From these distributions, three H-atom channels are observed. The vibrational structure in the fast-H channel could be assigned to a progression in the N 3 symmetric stretching mode (nu 100), together with a progression of the symmetric stretching mode with one quantum of bending motion (nu 110). The broad translational energy distribution of the slow-H channel is energetically consistent with the cyclic-N 3 formation process or a triple product dissociation channel. Photodissociation of DN 3 was also investigated using the same technique. Isotope effect on the product translational energy distribution has been observed, in which the slow H-atom is clearly more pronounced.     

Vibrational and photoionization spectroscopy of biomolecules: aliphatic amino acid structures

The aliphatic amino acids glycine, valine, leucine, and isoleucine are thermally placed into the gas phase and expanded into a vacuum system for access by time of flight mass spectroscopy and infrared (IR) spectroscopy in the energy range of 2500-4000 cm(-1) (CH, NH, OH, and stretching vibrations). The isolated neutral amino acids are ionized by a single photon of 10.5 eV energy (118 nm), which exceeds by less than 2 eV their reported ionization thresholds. As has been reported for many hydrogen bonded acid-base systems (e.g., water, ammonia, alcohol, acid clusters, and acid molecules), the amino acids undergo a structural rearrangement in the ion state (e.g., in simplest form, a proton transfer) that imparts sufficient excess vibrational energy to the ion to completely fragment it. No parent ions are observed. If the neutral ground state amino acids are exposed to IR radiation prior to ionization, an IR spectrum of the individual isomers for each amino acid can be determined by observation of the ion intensity of the different fragment mass channels. Both the IR spectrum and fragmentation patterns for individual isomers can be qualitatively identified and related to a particular isomer in each instance. Thus, each fragment ion detected presents an IR spectrum of its particular parent amino acid isomer. In some instances, the absorption of IR radiation by the neutral amino acid parent isomer increases a particular fragmentation mass channel intensity, while other fragmentation mass channel intensities decrease. This phenomenon can be rationalized by considering that with added energy in the molecule, the fragmentation channel populations can be modulated by the added vibrational energy in the rearranged ions. This observation also suggests that the IR absorption does not induce isomerization in the ground electronic state of these amino acids. These data are consistent with theoretical predictions for isolated amino acid secondary structures and can be related to previous IR spectra of amino acid conformers.     

A sheathless poly(methyl methacrylate) chip-CE/MS interface fabricated using a wire-assisted epoxy-fixing method

Using a wire-assisted epoxy-fixing method, a sheathless CE/MS interface on a poly-(methyl methacrylate) (PMMA) CE chip has been developed. The sheathless chip-CE/MS interface utilized a tapered fused-silica tip and the electrical connection was achieved through a layered coating of conductive rubber. The wire-assisted method provided facile alignment of channels between the PMMA CE chip and an external capillary sprayer without the need for micromachining. Because the wire was in the channel during fixing, the risk of channel blockage by the epoxy was avoided. This chip CE device has minimal dead volume because the interstitial spaces were filled by a fast-fixing epoxy resin. The performance of the chip-CE-ESI-MS device was demonstrated with the analysis of peptide mixtures.     

DNA electrophoresis in a nanofence array

We present the design and implementation of an oxidized silicon "nanofence array" for long DNA electrophoresis. The device consists of a periodic array of post-filled regions (the nanofences) alternating with empty channel regions. Even in this prototype version, the nanofence array provides the resolving power of a hexagonal nanopost array without requiring any direct-write nanopatterning steps such as electron-beam lithography. Through detailed single molecule investigations, we demonstrate that the origin of the resolving power of the nanofence array is not a reduction in band broadening, which might be expected from the theories for DNA electrophoresis in post arrays. Rather, the enhanced stretching of the hooked DNA by the uniform electric field between nanofences increases the efficiency of the collisions.     

PHBV电纺纤维结构与形态的研究

利用电纺丝法制备了超细聚 β 羟基丁酸戊酸酯 (PHBV)纤维 ,通过扫描显微镜 (SEM)、差热分析(DSC)、宽角X射线衍射和偏振红外吸收光谱对产品进行了结构与形态的表征 .研究了纺丝过程中溶液浓度、电压和接收距离 3个参数对纤维形态的影响 .结果表明 ,溶液浓度是决定性的 ,只有高于一个定值才能获得单一的纤维产品 .与流延成型的PHBV相比 ,电纺丝具有较高的取向度和结晶度 .原因可能是 ,电场力下喷丝震荡过程中带来的拉伸作用从而引起分子链的规整排列     

Multiphoton dissociative ionization of tert-pentyl bromide near 265 nm

We report on the photodissociation dynamics of tert-pentyl bromide near 265 nm investigated by time-sliced velocity map imaging. The speed and angular distributions have been analyzed for both the ground-state Br((2)P(3∕2)) atom (denoted Br) and the spin-orbit excited-state Br((2)P(1∕2)) atom (denoted Br*). The speed distributions of Br and Br* atoms are all found to consist of three Gaussian components, which correlate to three independent dissociation pathways on the excited potential energy surfaces: (1) the high translational energy (E(T)) component from the prompt dissociation along the C-Br stretching mode, (2) the middle E(T) component from the repulsive mode along the C-Br stretching coupled with some bending motions, and (3) the low E(T) component from the repulsive mode along the C-Br stretching coupled with more bending motions. More interestingly, we have also observed the tert-C(5)H(11)(+) ions in 263-267 nm. The near-zero kinetic energy distributions extracted from the three tert-C(5)H(11)(+) images near 265 nm show the typical characteristics that are attributable to multiphoton dissociative ionization, suggesting the existence of a neutral superexcited state of the parent tert-pentyl bromide molecule. The contribution of bromine atoms formed in this dissociative ionization channel adds in the total relative distribution of low E(T) component in the Br*(Br) formation channel, which reasonably explains the abnormal distributions observed in between the middle and low E(T) components in the Br*(Br) formation channel.     

The crystal structure and drawing induced polymorphism in poly(aryl ether ketone)s, 3. Crystallization during hot-drawing of poly(ether ether ketone ketone)

The evolution of crystallinity and polymorphism during hot-drawing of amorphous poly(ether ether ketone ketone) (PEEKK) as a function of strain rate, draw ratio, and temperature was investigated. In modification I, the competition of chain extension and molecular alignment is responsible for the strain rate and temperature dependence. Modification II crystallization is basically controlled by chain extension during stretching. The former can be transformed into the latter via relaxation during stretching or annealing at elevated temperature.     

Continuously Tunable Ion Rectification and Conductance in Submicrochannels Stemming from Thermoresponsive Polymer Self‐Assembly

A biomimetic conical submicrochannel (tip side ca. 400 nm) with functions of continuously tunable ion rectification and conductance based on thermoresponsive polymer layer‐by‐layer (LbL) self‐assembly is presented. These self‐assembled polymers with different layers exhibited a capability to regulate the effective channel diameter, and different ion rectifications/conductance were achieved. By controlling temperature, the conformation and wettability of the assembled polymers were reversibly transformed, thus the ion rectification/conductance could be further adjusted subtly. Owing to the synergistic effect, the ion conductance could be tuned over a wide range spanning three orders of magnitude. Moreover, the proposed system can be applied for on‐demand on‐off molecule delivery, which was important for disease therapy. This study opens a new door for regulating channel size according to actual demand and sensing big targets with different size with one channel.     

Br(2Pj) atom formation dynamics in ultraviolet photodissociation of tert-butyl bromide and iso-butyl bromide

The photodissociation dynamics of tert-C(4)H(9)Br and iso-C(4)H(9)Br has been studied at 234 and 265 nm using two-dimensional velocity map imaging technique. The translational energy and angular distributions have been analyzed for Br, Br(*), and tert-C(4)H(9) radical. The energy distribution of Br atom in the photodissociation of tert-C(4)H(9)Br is found to consist of two Gaussian components. The two components are correlated to two independent reaction paths on the excited potential energy surfaces: (1) the high-energy component from the prompt dissociation along the C-Br stretching mode and (2) the low-energy component from the repulsive mode along the C-Br stretching, coupled with some bending motions. For the energy distribution of Br(*) atom in the photodissociation of tert-C(4)H(9)Br, a third multiphoton dissociative ionization channel is observed at 265 nm in addition to the two energy components corresponding to channels (1) and (2). The energy distributions of Br and Br(*) atoms in the photodissociation of iso-C(4)H(9)Br can be fitted using only one Gaussian function indicating a single formation channel. Relative quantum yields for Br((2)P(32)) at 234 and 265 nm in the photodissociation of tert-C(4)H(9)Br are measured to be 0.76 and 0.65, respectively. For iso-C(4)H(9)Br, the measured value is Phi(234 nm)(Br)=0.81. The contribution of bending modes to Br and Br(*) is much more obvious in the photodissociation of tert-C(4)H(9)Br than in iso-C(4)H(9)Br.