Pyrolysis and fire behaviour of epoxy systems containing a novel 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide-(DOPO)-based diamino hardener

Highly soluble 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide-(DOPO)-based diamino hardener (2), bearing its amino groups directly on the DOPO framework, is investigated with respect to its use as a reactive flame retardant in thermosets. A mechanism for decomposition of the corresponding phosphorus-modified epoxy resin system based on a diglycidylether of bisphenol A DGEBA and 2 (DGEBA/2) is proposed and compared to the systems using DGEBA and 4,4′-diaminodiphenylsulfon (DGEBA/DDS) and to a similar system based on the structurally comparable non-reactive DOPO-based compound (DGEBA/DDS/1). Additive 1 changed the decomposition characteristics of the epoxy resin only slightly and phosphorus was released. Incorporating 2 induces two-step decomposition and most of the phosphorus remains in the residue. Furthermore, the fire behaviour of neat epoxy resin systems and a representative carbon fibre-reinforced composite based on DGEBA, DDS and 2 (DGEBA/DDS/2) were examined and compared to that of the analogous composite systems based on DGEBA/DDS and DGEBA/DDS/1. Based on different flame retardancy mechanisms both the reactive compound 2 and the additive compound 1 improve flammability (increase in LOI >13% and achieving V-1 behaviour) of the epoxy resin and composites. Under forced flaming only the flame inhibition of the additive compound 1 acts sufficiently. Lastly, the superior key mechanical properties of the epoxy resin and composite based on 2 are sketched.     

Preparation, thermal properties, morphology, and microstructure of phosphorus-containing epoxy/SiO2 and polyimide/SiO2 nanocomposites

A phosphorus-containing tri-ethoxysilane (dopo-icteos) reacting from the nucleophilic addition reaction of 9,10-dihydro-9-oxa-10-phosphaphenanthrene 10-oxide (dopo) and 3-(trieoxysilyl) isocyanate (icteos) was synthesized. The structure of dopo-icteos was confirmed by ¹H, ¹³C, ³¹P NMR and IR spectra. A triethylamine catalyzed mechanism for the dopo-icteos synthesis was proposed and verified by NMR spectra. The phosphorus-containing epoxy/SiO₂ and polyimide/SiO₂ nanocomposites were prepared from the in-situ curing of diglycidyl ether of bisphenol A (DGEBA)/4,4-diaminodiphenylmethane(DDM)/dopo-icteos, and imidization of poly(amic acid) of pyromellitic dianhydride (PMDA)/4,4′-oxydianiline (ODA)/dopo-icteos, respectively. The microstructure and morphology were investigated by ²⁹Si NMR, scanning electron microscope (SEM), EDS (Si and P mapping) analysis and atomic force microscope (AFM). The thermal properties, flame retardancy and dielectric properties of the organic-inorganic hybrids were investigated by differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), limiting oxygen index (LOI), thermal gravimetric analysis (TGA) and dielectric analyzer (DEA).     

Synthesis of three novel phosphorus-containing flame retardants and their application in epoxy resins

One symmetric diamine (4) and two symmetric phenols (5) and (6) were synthesized as phosphorus-containing flame retardants. The synthesis comprised a two-step procedure: the condensation of p-phenylenediamine with benzaldehyde, 4-hydroxybenzaldehyde and 2-hydroxybenzaldehyde respectively, followed by the addition of 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide to the imine linkage. The structures of (4)-(6) were characterized by FTIR, NMR and mass spectra. (4)-(6) served as co-curing agents of diaminodiphenylmethane for epoxy resins, and epoxy thermosets exhibited excellent flame retardancy, moderate changes in glass transition temperature (T_g) and thermal stability. When the phosphorus content reached 1.0 wt.%, the epoxy resin system met the UL-94 V-0 classification and the limiting oxygen index (LOI) reached more than 35.6, probably because of the nitrogen-phosphorus synergistic effect.     

Development of an aromatic triamine-based flame-retardant benzoxazine and its high-performance copolybenzoxazines

An aromatic triamine-based flame-retardant benzoxazine (3), which could not be prepared by the traditional approaches, was successfully prepared by a three-step procedure. The first step is the condensation of 2-hydroxybenzaldehyde with an aromatic triamine, forming intermediate (1) with an imine linkage. The second step is the reduction of the imine linkage by sodium borohydride, resulting in intermediate (2) with a secondary amine linkage. The third step is the ring closure condensation of (2), leading to benzoxazine (3). The structures of (1-3) were confirmed by IR, high-resolution mass, ¹H and ³¹P NMR spectra. Benzoxazine (3) was copolymerized with commercial benzoxazines. According to the measurements, thermal properties, flame retardancy, dimensional stability of commercial polybenzoxazines were significantly improved via the incorporation of (3).     

Functionalizing nano-montmorillonites by modified with intumescent flame retardant: Preparation and application in polyurethane

The 2-(2-(5,5-dimethyl-1,3,2-dioxaphosphinyl-2-ylamino)ethy-amino)-N,N,N-triethyl-2-oxoethanaminium chloride (compound c) containing phosphorus-nitrogen structure was synthesized and characterized. A novel intumescent flame retardant, namely montmorillonite (MMT) by modified with compound c (c-MMT), was prepared by ion exchanging of the nanometer Na⁺-montmorillonite (Na-MMT) with compound c. Both FTIR and X-ray diffraction (XRD) indicated that compound c had intercalated with Na-MMT and exfoliated c-MMT/PU nanocomposites have obtained by in-situ polymerization. TEM results further support the formation of the exfoliated nanocomposites. The thermal stability and flammability of c-MMT/PU composites were investigated by thermogravimetric analysis (TGA) and cone calorimeter test respectively. The results showed that the addition of flame retardant c-MMT enhanced the thermal stability and flame retardancy of PU significantly. SEM results indicated that c-MMT can achieve better dispersion in the chars after combustion and the compact and dense intumescent char is formed for c-MMT/PU composites after combustion. It is found that the char structure plays an important role for c-MMT in PU resin. The thermal stability and flame retardancy of PU resin were also significantly improved by an addition of c-MMT in PU resin.     

Synthesis and stability of 1,1-dialkyl-1H-azulenium cations

Starting from trimethylsilyl enol ether of 1-acetyl-1,3,5-cycloheptatriene, the title 1,1-dimethyl-, 1,1-diethyl-, and 1,1-dipropyl-1H-azulenium cations 6-8 were synthesized in five steps. The order of pK_R+ values of these cations was found to be 7>8>6. A comparison of the values between 1,1-dialkyl- and 1,1-spiroalkylated 1H-azulenium cations with the same number of carbon atoms at the 1-position provided the results of 7>1 and 8<3. The cation 8 shows a relatively lower pK_R+ value to those of 3 and 7 probably due to its slightly bulkier propyl groups from which solvation stabilization of 8 under the conditions suffers. An intermolecular charge-transfer interaction between the cations and dibenzo-24-crown-8 was also studied.     

Assembly of novel phenanthroline-based cobalt(II) coordination polymers by selecting dicarboxylate ligands with different spacer length: From 1-D chain to 3-D interpenetrated framework

Three novel Co^II coordination polymers [Co(Dpq)₂(1,4-NDC)_0.5] · (1,4-HNDC) (1), [Co(Dpq)(2,6-NDC)] (2), and [Co₂(Dpq)₂(BPEA)₄(H₂O)] · H₂O (3) have been obtained from hydrothermal reaction of cobalt nitrate with the mixed ligands dipyrido[3,2-d:2′,3′-f]quinoxaline (Dpq) and three dicarboxylate ligands with different spacer length [1,4-naphthalene-dicarboxylic acid (1,4-H₂NDC), 2,6-naphthalene-dicarboxylic acid (2,6-H₂NDC) and biphenylethene-4,4′-dicarboxylic acid (BPEA)]. All these complexes are fully structurally characterized by elemental analysis, IR, and single-crystal X-ray diffraction analysis. Single-crystal X-ray analysis reveal that complex 1 is infinite one-dimensional (1-D) chains bridged by 1,4-NDC ligands, which are extended into a two-dimensional (2-D) supramolecular network by π-π interactions between the Dpq molecules. Complex 2 is a distorted three-dimensional (3-D) PtS network constructed from infinite Co-O-C rod units. Complex 3 has a 5-fold interpenetrated 3-D structure with diamondoid topology based on dinuclear [Co₂(CO₂)₂(μ₂-OH₂)N₄O₂] units and BPEA molecules. The different structures of complexes 1-3 illustrate the influence of the length of dicarboxylate ligands on the self-assembly of polymeric coordination architectures. In addition, the thermal properties of complexes 1-3 and fluorescent properties of complexes 2 and 3 have been investigated in the solid state.     

Synthesis and properties of novel crown ether-annelated 4′,5′-diaza-9′-(1,3-dithiole-2-ylidene)-fluorenes and their ruthenium(II) complexes

Two novel redox-active 1,3-dithiole (DT) ring-fused 4,5-diazafluorene ligands with crown ether moieties (L1 and L2) were synthesized and characterized. The crystal structure of L1 was studied. The electrochemical and spectroscopic properties of these new ligands, as well as the corresponding bis(bipyridine)ruthenium(II) complexes [4: Ru L1(bpy)₂ and 5: Ru L2(bpy)₂], were also been investigated.     

Quantum chemistry studies on the Ru-M interactions and the P NMR in [Ru(CO)3(Ph2Ppy)2(MCl2)] (M = Zn, Cd, Hg)

To study the Ru-M interactions and their effects on ³¹P NMR, complexes [Ru(CO)₃(Ph₂Ppy)₂] (py = pyridine) (1) and [Ru(CO)₃(Ph₂Ppy)₂MCl₂] (M = Zn, 2; Cd, 3; Hg, 4) were calculated by density functional theory (DFT) PBE0 method. Moreover, the PBE0-GIAO method was employed to calculate the ³¹P chemical shifts in complexes. The calculated ³¹P chemical shifts in 1-3 follow 2 > 3 > 1 which are consistent to experimental results, proving that PBE0-GIAO method adopted in this study is reasonable. This method is employed to predict the ³¹P chemical shift in designed complex 4. Compared with 1, the ³¹P chemical shifts in 2-4 vary resulting from adjacent Ru-M interactions. The Ru → M or Ru ← M charge-transfer interactions in 2-4 are revealed by second-order perturbation theory. The strength order of Ru → M interactions is the same as that of the P-Ru → M delocalization with Zn > Cd > Hg, which coincides with the order of ³¹P NMR chemical shifts. The interaction of Ru → M, corresponding to the delocalization from 4d orbital of Ru to s valence orbital of M²⁺, results in the delocalization of P-Ru → M, which decreases the electron density of P nucleus and causes the downfield ³¹P chemical shifts. Except 2, the back-donation effect of Ru ← M, arising from the delocalization from s valence orbital of M²⁺ to the valence orbital of Ru, is against the P-Ru → M delocalization and results in the upfield ³¹P chemical shifts in 4. Meanwhile, the binding energies indicate that complex 4 is stable and can be synthesized experimentally. However, as complex [Ru(CO)₃(Ph₂Ppy)₂HgCl]⁺5 is more stable than 4, the reaction of 1 with HgCl₂ only gave 5 experimentally.     

Synthesis of di-, tri-, tetra- and pentacyclic arene complexes of ruthenium(II):[Ru(η-polycyclic arene)-(1-5-η-cyclooctadienyl)]PF6 and their reactions with NaBH4

The phenanthrene complex of ruthenium(II), [Ru(η⁶-phenanthrene)(1,5-η⁵-cyclooctadienyl)]PF₆ (2c), is prepared by the reaction of Ru(η⁴-1,5-COD)(η⁶-1,3,5-COT) (1) with phenanthrene and HPF₆ in 65% yield. Similar treatments with di- tri-, tetra- and pentacyclic arenes give corresponding polycyclic arene complexes, [Ru(η⁶-polycyclic arene)(1-5-η⁵-cyclooctadienyl)]PF₆ [polycyclic arene = naphthalene (2b), anthracene (2d), triphenylene (2e), pyrene (2f) and perylene (2g)] in 46-90% yields. The molecular structure of the perylene complex 2g is characterized by X-ray crystallography. Reaction of 2c with NaBH₄ gives a mixture of the 1,5- and 1,4-COD complexes of ruthenium(0), Ru(η⁶-phenanthrene)(η⁴-1,5-COD) (3c) and Ru(η⁶-phenanthrene)(η⁴-1,4-COD) (4c) in 76% in 1:8 molar ratio. The arene exchange reactions among cationic complexes [Ru(η⁶-arene)(1-5-η⁵-cyclooctadienyl)]PF₆ (2) showed the coordination ability of arenes in the following order: benzene ∼ triphenylene > phenanthrene > naphthalene > perylene ∼ pyrene > anthracene, suggesting the benzo fused rings, particularly those of acenes, decreasing thermal stability of the arene complex.     

Thermal behaviour of hexanuclear titanium(IV) oxo isopropoxide carboxylates,and their usability as a single-source TiO2 CVD precursors

Hexanuclear oxo titanium(IV) isopropoxide carboxylates, of the general formula [Ti₆O₆(OPrⁱ)₆(O₂CR)₆] (R = Bu^t (1), CH₂Bu^t (2)) and [Ti₆O₆(OPrⁱ)₆(O₂CC(CH₃)₂Et)₆] · 0.5(C₇H₈) (3), have been synthesized as polycrystalline powders in order to study their thermal properties and usability as TiO₂ CVD precursors. Analysis of thermogravimetric and variable temperature (VT-IR) data shows that the thermal stability of the synthesized complexes decreases as follows 3 > 2 > 1. The composition of the vapors formed during the thermolysis of 1–3 were qualitatively analysed with VT-IR methods and mass spectrometry (MS-EI). According to obtained results, the decomposition of 1 and 2 proceeds with a partial decomposition and the formation of a volatile and stable titanium species, sufficient for their transport in vapors. The formation of volatile titanium-containing derivatives is an important factor that decides the application of 1 and 2 as precursors in CVD experiments. The high stability of 3 causes the thermal decomposition of this complex to be observed just above 573 K, and volatile titanium-containing derivatives were not detected in vapors. These results indicate that 3 could not be used as a precursor in CVD processes.     

Comparative structural study of the complexation behaviour of silver(I), cadmium(II), mercury(II), and palladium(II) with a 17-membered N3O2-donor macrocycle

A comparative investigation of the coordination behaviour of the 17-membered, N₃O₂-donor macrocycle, 1,12,15-triaza-3,4:9,10-dibenzo-5,8-dioxacycloheptadecane, L, with the soft metal ions Ag(I), Cd(II), Hg(II), and Pd(II) is reported. The X-ray structures of 12 complexes have been determined and a range of structural types, including both mononuclear and dinuclear species, shown to occur. In particular cases the effect of anion variation on the resulting structures has been investigated; L reacts with AgX (X = NO₃, ClO₄, PF₆, OTf and CN) to yield related 2:2 (metal:ligand) complexes of types [Ag₂L₂(NO₃)₂] (1), [Ag₂L₂](ClO₄)₂ · 2DMF (2), [Ag₂L₂](PF₆)₂ · 2DMF (3), [Ag₂L₂](OTf)₂ (4) and [Ag₂L₂(μ-CN)][Ag(CN)₂] · H₂O (5). In all five complexes the ether oxygens of each ring are unbound. In 1–4 the macrocycles are present in sandwich-like arrangements that shield the dinuclear silver centres, with each silver bonded to two nitrogen donors from one L and one nitrogen from a second L. A Ag···Ag contact is present between each metal centre such that both centres can be described as showing distorted tetrahedral geometries. In the case of 5 a rare single μ₂-κC:κC symmetrically bridging two-electron-donating cyano bridge links silver ions [Ag···Ag distance, 2.7437(10) Å]; the macrocyclic ligands are orientated away from the dinuclear metal centres. In contrast to the behaviour of silver, reaction of cadmium(II) perchlorate with L resulted in a mononuclear sandwich-like complex of type [CdL₂](ClO₄)₂ · CH₃CN (6). Again, the ether oxygens do not coordinate, with each L binding to the cadmium centre only via its three nitrogen donors in a facial arrangement such that a distorted octahedral coordination geometry is attained. Reaction of L with HgX₂ (X = ClO₄, SCN and I) yielded the monomeric species [HgL(ClO₄)₂] (7), [HgL(SCN)₂]·CH₃CN (8) and [Hg₂L₂](HgI₄)₂ · 2L (9), in which all five donors of L are bound to the respective mercury centres. However, reaction of L with Hg(NO₃)₂ in dichloromethane/methanol gave a mononuclear sandwich-like complex [HgL₂](NO₃)₂ · 2CH₃OH (10) without anion coordination. Reaction of K₂PdCl₄ and Pd(NO₃)₂ with L yielded the 1:1 complexes [PdLCl]Cl · H₂O (11) and [PdL(NO₃)]NO₃ · CH₃OH (12), respectively, in which the metal is bound to three nitrogen donors from L along with the corresponding chloride or nitrate anion. Each palladium adopts a distorted square-planar coordination geometry; once again the ether oxygens are not coordinated.     

Unexpected fragmentation of phenyldithiobenzoate, formation and X-ray structure of [μ,η(S,S)-1,2-(dithio)-1,2-(diphenylethylene)] diiron hexacarbonyl complex

The reaction of Fe₂(CO)₉ with phenyldithiobenzoate PhCS₂Ph 1 afforded four colored compounds: [(μ-η³(C,S,S)PhCS₂Ph)]Fe₂(CO)₆2, (μ-S)₂Fe₃(CO)₉3, (μ-SPh)₂Fe₂(CO)₆4 and [μ-η²(S,S)][PhC(S)C(S)Ph]Fe₂(CO)₆5. Complex 5 was characterized by X-ray crystallography. The formation of complexes 4 and 5 was unexpected since it involved a fragmentation of the organic ligand 1 during its reaction with Fe₂(CO)₉. The electrochemical studies of 1, complexes 2 and 3 were undertaken in order to get information about the chemical behaviors of the intermediates generated by electron transfer. The results of cyclic voltammetry studies of 2 and 1 suggested that the reaction of 1 with Fe₂(CO)₉ involved two competitive reactions: (i) a thermal reaction which led to the expected compounds 2 and 3 and (ii) an electron transfer reaction involving a fragmentation of starting ligand 1 led to the unexpected complex 5. The required electrons may be provided by iron during the thermal decay of complexes 2 or 3 or Fe₂(CO)₉.     

[Cu4OCl6(DABCO)2]·0.5DABCO·4CH3OH (“MFU-5”): Modular synthesis of a zeolite-like metal-organic framework constructed from tetrahedral {Cu4OCl6} secondary building units and linear organic linkers

A novel metal-organic framework (MOF) based on a tetranuclear copper cluster and a linear organic ligand formulated as [Cu₄OCl₆(DABCO)₂]·0.5DABCO·4CH₃OH (denoted as MFU-5, MFU=Metal-Organic Framework, Ulm University; DABCO=1,4-diazabicyclo[2.2.2]octane), was prepared via solvothermal synthesis. In contrast with common MOF synthesis strategies, MFU-5 is assembled from pre-defined molecular secondary building units, i.e. {Cu₄OCl₆} moieties, which become the nodes of the coordination framework. The title compound was characterized by single crystal X-ray diffraction, variable temperature powder diffraction (VT-XRPD), thermal analysis, as well as IR- and UV/Vis spectroscopy. Crystal data for MFU-5: hexagonal, P6/mcc (no. 192), a=25.645(9), c=17.105(11) Å, V=9742(8) Å³, Z=12, 1690 structure factors, R[F²>2σ(F²)]=0.049. MFU-5 is a 3D metal-organic framework with 1D channels running along the c-axis hosting DABCO and methanol solvent molecules. The framework displays a zeolite-like structure constructed from mso cages, which represents the composite building units in the zeolites SSF, MSO and SZR. Two-fold interpenetration is observed between these building units. TG/DTA-MS and VT-XRPD characterization reveal a stepwise release of methanol and DABCO molecules upon heating, eventually resulting in a structural change into a non-porous material.     

Metal-directed supramolecular assembly of metal(II) benzoates (M = Co,Ni, Cu,Zn, Mn,and Cd) with 4,4′-bipyridine: Effects of metal coordination modes and novel catalytic activities

Six polymeric metal(II)-benzoate complexes of formula [Co₂(O₂CPh)₄(4,4′-bpy)₂]_n (1-Co), [Ni(O₂CPh)₄(H₂O)₂(4,4′-bpy)]_n (2-Ni), [Cu₂(O₂CPh)₄(4,4′-bpy)]_n (3-Cu), [Zn₂(O₂CPh)₂(OH)₂(4,4′-bpy)₂]_n (4-Zn), [Zn₃(O₂CPh)₄(μ-OH)₂(4,4′-bpy)₂]_n (5-Zn), and [Cd₂(O₂CPh)₄(4,4′-bpy)₂]_n (6-Cd) have been synthesized and characterized (4,4′-bpy = 4,4′-bipyridine). 1-Co and 6-Cd show ladder-type double chains, 2-Ni does a helical structure, 3-Cu does a one-dimensional chain containing paddle-wheel units, 4-Zn does a zigzag chain, and 5-Zn does two-dimensional sheets. Since different structures provide different coordination geometry of each metal ion, it is clear that selection of appropriate metal ions can control the coordination geometry of each metal ion to form different crystal structures. Reactivity study of the compounds 1–7 for the transesterification of a variety of esters has shown that 4-Zn and 5-Zn are very efficient and the best among them. The catalyst 6-Cd containing Cd ion, well known as an inert metal ion for the ligand substitution, also catalyzed efficiently the transesterification of a variety of esters, and its reactivity is comparable to 4-Zn and 5-Zn. Moreover, the redox-active metal-containing polymers, 1-Co, 3-Cu, and 7-Mn, have shown efficient catalytic reactivities for the transesterification reactions, while 2-Ni has displayed a very slow conversion. The reactivities of the compounds used in this study are in the order of 5-Zn > 4-Zn > 6-Cd > 7-Mn ∼ 3-Cu > 1-Co > 2-Ni, indicating that the non-redox metal-containing compounds (5-Zn, 4-Zn, and 6-Cd) show better activity than the redox-active metal-containing compounds (7-Mn, 3-Cu, 1-Co, and 2-Ni). These results suggest that it is possible to tune the catalytic activities by changing from Zn to those metals such as Cd, a kinetically inert metal, or Cu, Mn, and Co, the redox-active metals.     

Facile preparation of novel epoxy curing agents and their high‐performance thermosets

Two flame‐retardant epoxy curing agents, 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐yl‐tris(4‐hydroxyphenyl)methane (1) and 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐yl‐ (4‐aminophenyl)‐bis(4‐hydroxyphenyl)methane (2), were prepared by a facile, economic, one‐pot procedure. The structures of the curing agents were confirmed by IR, high‐resolution mass, 1‐D, and 2‐D NMR spectra. A reaction mechanism was proposed for the preparation, and the effect of electron withdrawing/donating effects on the stabilization of the carbocation was discussed. (1‐2) served as curing agents for diglycidyl ether of bisphenol A (DGEBA), dicyclopentadiene epoxy (HP‐7200), and cresol novolac epoxy (CNE). Properties such as glass transition temperature, coefficient of thermal expansion, thermal decomposition temperature, and flame retardancy of the resulting epoxy thermosets were evaluated. The resulting epoxy thermosets show high T_g, low thermal expansion, moderate thermostability, and excellent flame retardancy. The bulky biphenylene phosphinate pendant makes polymer chains difficult to rotate, explaining the high T_g and low thermal expansion characteristic. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7898–7912, 2008     

Mixed ligand complexes of AEE hexafluoroacetylacetonates with diglyme: Synthesis,crystal structure and thermal behavior

The novel mixed ligand complexes [Ca(hfa)₂(diglyme)(H₂O)] (I), [Sr(hfa)₂(diglyme)(H₂O)] (II) and [Ba(hfa)₂(diglyme)₂] (III) (Hhfa = 1,1,1,5,5,5-hexafluoropentane-2,4-dione, diglyme = 2,5,8-trioxanonane) were synthesized by the reactions of the alkaline earth element (AEE) carbonates in n-hexane with a mixture of Hhfa and diglyme, and they were characterized by elemental analysis, ¹H and ¹³C NMR, and FTIR spectroscopy. The crystal structures of I–III, consisting of mononuclear isolated molecules, have been determined. The thermal behavior and composition of the vapor phase have been studied for I–III by thermal analysis at low pressure and mass spectrometry using a Knudsen cell. The stability of the mixed ligand complexes [M(hfa)₂(diglyme)_n] to the removal of diglyme molecules under heating decreases in the row I > II ≈ III, and only I evaporates as the mixed ligand complex after water removal.     

New 4,5-dichlorophthalhydrazidate-bridged chained coordination polymers

The hydrothermal self-assemblies of Pb²⁺/Cd²⁺ salt, 4,5-dichlorophthalic acid (dcpha), N₂H₄·H₂O together with 1,10-phenanthroline·H₂O (phen) or 2,2′-bipyridine (bpy) generated two new monoacylhydrazidate-bridged 1-D chained coordination polymers [Pb₂(DCPTH)₄(phen)₂] 1 and [Cd₃(DCPTH)₂(dcph)₂(bpy)₂] 2 (DCPTH=4,5-dichlorophthalhydrazidate, dcph=4,5-dichlorophthalate). The monoacylhydrazidate ligand DCPTH originated from the hydrothermal in situ acylation reaction between dcpha and N₂H₄·H₂O. In compound 1, two types of coordination modes for DCPTH are found, which link alternately the Pb(II) centers into a 1-D chain structure of compound 1 with ancillary phen molecules. In compound 2, DCPTH and dcph as the mixed bridges extend the Cd(II) centers into a 1-D chain structure of compound 2 with auxiliary bpy molecules. DCPTH in compound 2 shows a different coordination mode from those observed in compound 1.     

Synthesis,structure and properties of [ML(NO3)2]: M = Co,Ni, Cu; L = N-(2-pyridylethyl)pyridine-2-carbaldimine

Syntheses of complexes of the type [ML(NO₃)₂], where M = Co(II), Ni(II), and Cu(II), L = N-(2-pyridylethyl)pyridine-2-carbaldimine, a tridentate ligand, are described. They were characterized by elemental analysis, spectral, magnetic, thermal studies, and X-ray crystallography. In the cobalt (1), nickel (2), and copper (3) complexes, the bivalent metal ion is coordinated by the three nitrogen atoms of the tridentate L with two pyridine-N groups occupying trans positions. Amongst the two nitrates one coordinates in a bidentate fashion while the other adopts a monodentate fashion. The X-band EPR spectra of 1, 2, and 3 in the polycrystalline state and in acetonitrile solution at 77 K are reported. Room temperature vibrating sample magnetometer data of 1, 2, and 3 afforded μ_eff values respectively of 3.928, 3.897, and 1.952 BM. The thermal stability order is 1 > 2 > 3, showing a reverse Irving-Williams trend.     

R-phenyldicarboxyl (R = H, NO2 and COOH) modular effect on Ni(II) coordination polymers incorporated with a versatile connector 1H-3-(3-pyridyl)-5-(4-pyridyl)-1,2,4-triazole

Based on the versatile ligand 1H-3-(3-pyridyl)-5-(4-pyridyl)-1,2,4-triazole (3,4′-Hbpt) (1), a series of coordination compounds [Ni(3,4′-Hbpt)(ip)] (2), [Ni(3,4′-Hbpt)₂(tp)(H₂O)₂] (3), [Ni₂(3,4′-Hbpt)(5-NO₂-ip)₂(H₂O)₄] (4) and [Ni(3,4′-Hbpt)(pm)_0.5(H₂O)₃]·2H₂O (5) have been hydrothermally constructed through R-phenyldicarboxyl (R = H, NO₂ and COOH) intervention effect (ip = isophthalic anion, tp = terephthalic anion, 5-NO₂-ip = 5-NO₂-isophthalic anion, pm = pyromellitic anion). Structural analysis reveals that 3,4′-Hbpt adopts μ-N_py, N_py coordination modes in two typical conformations in these target coordination compounds. In cooperation with the auxiliary ligands benzenedicarboxylate connectors, a variety of Ni(II) coordination networks such as 2-D layer with (4, 4) topology (2) 1-D chain (3), honeycomb (4) and 2-D helical chains (5) have been assembled. Theoretical calculation based on density functional theory (DFT) for ligand (1) is also employed to explicate the stability of the different conformations. Moreover, thermal stability of these crystalline materials is explored by TG-DTG.