全电流超导隧道结电子模拟器

本文描述的电子模拟器完整地模拟了超导隧道结中的各项隧道电流,它包含了频率、温度和超导能隙的影响,并考虑了非线性准粒子电阻和电抗项的作用.论文简述了电子模拟器的基本原理、电路,给出了恒压源与恒流源两种偏置条件下的直流与交流 I-V 特性,还得到了上述两种偏置条件下的约瑟夫逊台阶及光子辅助的准粒子隧道效应台阶等高频行为.     

s波超导体绝缘层dx2-y2波超导体结的直流Josephson电流

在s波超导体绝缘层dx2-y2波超导体结(sId)中,考虑到结界面粗糙散射,运用BogoliubovdeGennes(BdG)方程和FurusakiTsukada(FT)电流公式,计算超导结中的准粒子传输系数和直流Josephson电流.结果表明:sId超导结的直流Josephson电流随温度以及结两侧的相位差变化的关系曲线强烈地依赖于d波超导体的晶轴方位;结界面的粗糙散射对Josephson电流有抑制作用 关键词： s/I/d超导结 dx2-y2波超导体 直流Josephson电流     

Reduced quantum fluctuation in mesoscopic Josephson junction with nonclassical radiation field at finite temperature

We have investigated the reduced fluctuation properties in a mesoscopic Josephson junction with the squeezed state at a finite temperature. It is shown that the fluctuations increase with increasing temperature and the mesoscopic Josephson junction subsystem can exhibit squeezing behaviour at an appropriately low temperature.     

本征约瑟夫森结跳变电流分布的量子修正

在约瑟夫森结跳变电流统计分布的理论拟合过程中,通常考虑的是宏观量子隧穿与热激活这两种过程. 对Bi₂Sr₂CaCu₂O_8+δ表面本征约瑟夫森结的结果分析表明,在宏观量子隧穿与热激活的交界区域内,若考虑量子修正能使实验曲线与理论曲线符合得更好. 这种较为完整的拟合方法,对研究本征约瑟夫森器件中的宏观量子现象及其在超导量子比特中的应用具有积极的意义. 关键词： 约瑟夫森结 跳变电流分布 量子修正     

Fluctuation power spectrum of a Josephson junction

The fluctuation power spectrum of the Josephson junction has been evaluated in the limit of large energy barriers [(U _n ^max−U _n ^min)γ]≫1 and small currents [x≪x _e]. The result is valid for finite capacitance of the junction. The effect of the fluctuating Josephson current on the voltageV(t) across the junction has also been taken into account.     

外场中超导结的直流约瑟夫逊电流的计算

外加磁场对超导体/半导体/超导体结的临界电流有一定影响。超导结的临界电流与磁场的曲线非常类似于单色光在单狭缝衍射的夫琅和费图样。该文在未考虑外加磁场的超导体/半导体/超导体结的临界电流的基础上,进一步对外加磁场的情形进行了研究,并对其结果借助M athem atica软件做了进一步的讨论。     

Modulation depth of series SQUIDs modified by Josephson junction area

The superconducting quantum interference device(SQUID) amplifier is widely used in the field of weak signal detection for its low input impedance, low noise, and low power consumption. In this paper, the SQUIDs with identical junctions and the series SQUIDs with different junctions were successfully fabricated. The Nb/Al-AlO_x/Nb trilayer and input Nb coils were prepared by asputtering equipment. The SQUID devices were prepared by a sputtering and the lift-off method.Investigations by AFM, OM and SEM revealed the morphology and roughness of the Nb films and Nb/Al-AlO_x/Nb trilayer.In addition, the current–voltage characteristics of the SQUID devices with identical junction and different junction areas were measured at 2.5 K in the He~3 refrigerator. The results show that the SQUID modulation depth is obviously affected by the junction area. The modulation depth obviously increases with the increase of the junction area in a certain range. It is found that the series SQUID with identical junction area has a transimpedance gain of 58 ? approximately.     

Anisotropy of p-wave Josephson junction

<正>The anisotropy of the dc Josephson current in the superconducting junctions of the p-wave equal spin pairing symmetry is theoretically investigated by the Furusaki-Tsukada-like formula.The current phase relations exhibit different oscillation periods and different phase shifts for the current along different directions,respectively.     

超导隧道结中的电流相位关系

计算了等自旋配对超导隧道结中的直流Josephson电流.结果表明,当两侧超导体中配对势的轨道对称性分别属于磁点群D₄的A不可约表示和 ²E不可约表示的情况下,电流相位关系是I∝sin4φ. 关键词： 超导隧道结 Josephson电流     

约瑟夫森器件中的宏观量子现象及超导量子计算

超导体中的电子结成库珀对，凝聚到可以用一个宏观波函数来描绘的能量基态，该波函数的位相是代表了成百万库珀对集体运动的宏观变量．以约瑟夫森结为基础元件的超导约瑟夫森器件，使人们能够控制并测量一个超导体的位相和库珀对数目，因此是研究宏观量子现象的理想系统．文章回顾了约瑟夫森器件中的宏观量子现象研究的发展历程，介绍了当前超导约瑟夫森器件在量子计算中的重要应用，并对它们的未来作了简要的展望．     

Design of a gap tunable flux qubit with FastHenry

In the preparations of superconducting qubits, circuit design is a vital process because the parameters and layout of the circuit not only determine the way we address the qubits, but also strongly affect the qubit coherence properties. One of the most important circuit parameters, which needs to be carefully designed, is the mutual inductance among different parts of a superconducting circuit. In this paper we demonstrate how to design a gap-tunable flux qubit by layout design and inductance extraction using a fast field solver Fast Henry. The energy spectrum of the gap-tunable flux qubit shows that the measured parameters are close to the design values.