Class of solutions for flow near a stagnation point

This paper considers a class of solutions for flow of a perfect gas near the stagnation point on a two-dimensional obstacle, where the flow is rotational far upstream from the obstacle. It is shown that the potential flow near the stagnation point is a special case of this class of solutions. Solutions accounting for the rotationality of the outer flow are obtained for flow in the mixing layer with an obstacle, and these solutions differ appreciably from the analogous Jimenez solution for potential flow near the stagnation point on a two-dimensional obstacle.     

Boundary layer in the vicinity of the stagnation point of a body of axial symmetry in a turbulent stream

The flow in the boundary layer in the vicinity of the stagnation point of a flat plate is examined. The outer stream consists of turbulent flow of the jet type, directed normally to the plate. Assumptions concerning the connection between the pulsations in velocity and temperature in the boundary layer and the average parameters chosen on the basis of experimental data made it possible to obtain an isomorphic solution of the boundary layer equations. Equations are obtained for the friction and heat transfer at the wall in the region of gradient flow taking into account the effect of the turbulence of the impinging stream. It is shown that the friction at the wall is insensitive to the turbulence of the impinging stream, while the heat transfer is significantly increased with an increase in the pulsations of the outer flow. These properties are confirmed by the results of experimental studies [1–4].Translated from Zhurnal Prikladnoi Mekhaniki i Tekhnicheskoi Fiziki, No. 5, pp. 83–87, September–October, 1973.     

Nonequilibrium viscous flow of a multicomponent gas in the vicinity of the stagnation point of a blunt body

This paper gives the results of numerical calculations characterizing the effect of variation of the shock layer parameters on the heat transfer in the case of a multicomponent nonequilibrium-dissociating air on a wall with finite catalycity in the vicinity of the stagnation point of a spherical blunt body. Similar results for the case of a binary mixture can be found in [1–3]. It is shown that a consideration of the variation of the parameters in the nonequilibrium shock layer leads to a significant increase in heat flux to the noncatalytic wall in comparison with the theory of an asymptotically thin nonequilibrium boundary layer with equilibrium parameters on its outer boundary.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 2, pp. 144–147, March–April, 1971.The author thanks V. V. Lunev for useful comments in the discussion of this work.     

Analytic investigation of friction and heat transfer in the neighborhood of a three-dimensional stagnation point at low and moderate Reynolds numbers

A study is made of hypersonic three-dimensional flow of a viscous gas past blunt bodies at low and moderate Reynolds numbers with allowance for the effects of slip and a jump of the temperature across the surface. The equations of the three-dimensional viscous shock layer are solved by an integral method of successive approximation and a finite-difference method in the neighborhood of the stagnation point. In the first approximation of the method an analytic solution to the problem is found. Analysis of the obtained solution leads to the proposal of a simple formula by means of which the calculation of the heat flux to a three-dimensional stagnation point is reduced to the calculation of the heat flux to an axisymmetric stagnation point. A formula for the relative heat flux obtained by generalizing Cheng's well-known formula [1] is given. The accuracy and range of applicability of the obtained expressions are estimated by comparing the analytic and numerical solutions. Three-dimensional problems of the theory of a supersonic viscous shock layer at small Reynolds numbers were considered earlier in [2–5] in a similar formulation but without allowance for the effects of slip.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 2, pp. 143–150, March–April, 1988.     

One-dimensional and two-dimensional analogs for three-dimensional viscous flows in the neighborhood of the plane of symmetry of a blunt body

An approximate method of determining the heat transfer and friction stress in three-dimensional flow problems using the two-dimensional and one-dimensional solutions is proposed. This method is applicable over a wide range of Reynolds numbers — from low to high. On the basis of a theoretical analysis of the approximate analytic solution of the equations of a three-dimensional viscous shock layer it is shown that the problem of determining the heat flux in the neighborhood of the plane of symmetry of bodies inclined to the flow at an angle of attack can be reduced, firstly, to the problem of determining that quantity for an axisymmetric body and, secondly, to the problem of determining the heat transfer to an axisymmetric stagnation point. On the basis of an analysis of the results of a numerical solution of the problem it is shown that corresponding analogs can also be used for the friction stress. The accuracy of the similarity relations established is estimated by solving the problem by a finite-difference method. A similarity relation of the same kind was previously obtained in [1] for a double-curvature stagnation point.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 117–122, January–February, 1990.     

Asymmetric flow of subsonic and sonic jets over an infinite wedge

A study is made of the flow of subsonic or sonic jets over an infinite wedge when the stagnation streamline bifurcates at the tip of the wedge. This regime can be realized only for a definite (previously unknown) relationship between the geometrical parameters. The problem is solved in the hodograph plane by the numerical method of [1] developed for the problem of a profiled Laval nozzle. A solution to the asymmetric problem obtained in the hodograph plane can be realized physically only for a definite relationship between the boundary values for the flow function. This relationship (which generalizes Prandtl's well-known formula [2] derived for asymmetric flow of incompressible jets over a plate on the basis of the momentum theorem) is obtained by analyzing the asymptotic behavior of the solution near the stagnation point. Examples of calculations are given.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 2, pp. 137–141, March–April, 1980.     

Calculation of supersonic viscid flow near stagnation line of a blunt body

A numerical study is made of supersonic flow of a viscous gas in the vicinity of the stagnation line of plane and axisymmetric blunt bodies (cylinder, sphere). As in [1–5], which consider the compressed layer of a viscous gas in the vicinity of the stagnation point, use is made of the locally self-similar approximation, which is used to transform the Navier-Stokes equations into a system of ordinary differential equations. In the present paper the solution is sought with the simplifications of [5] and with more general conditions, which makes it possible to study a broad class of flows. The proposed numerical algorithm permits obtaining the structure of the compressed layer near the stagnation line, including the shock wave and the boundary layer. The calculations made on a computer for different flow conditions are illustrated by graphs.The author wishes to thank G. I. Petrov, G. F. Telenin, and L. A., Chudov for their interest in the study and for their helpful discussions. discussions.     

Asymptotic theory of the flow around an obstacle by a sonic flow

The first investigation of the problem of the flow around an obstacle by a gas flow whose velocity is equal to the speed of sound at infinity was carried out in [1, 2], where it is shown in particular that the principal term of the appropriate asymptotic expansion is a self-similar solution of Tricomi's equation, to which the problem reduces in the first approximation upon a hodographic investigation. The requirement that the stream function be analytic as a function of the hodographic variables on the limiting characteristic was an important condition determining the selection of the self-similarity exponent n (xy^–n is an invariant of the self-similar solution). The analytic nature of the velocity field everywhere in the flow above the shock waves, which arise from necessity upon flow around an obstacle, follows from this condition. The latter was found in [3], where one of the branches of the solution obtained in [1] was used in the region behind the shock waves. The principal and subsequent terms of the asymptotic expansion describing a sonic flow far from an obstacle were discussed in [4], where the author restricted himself to Tricomi's equation. Each term of the series constructed in [4] contains an arbitrary coefficient (we will call it a shape parameter) which is not determined within the framework of a local investigation, and consideration of the problem of flow around a given obstacle as a whole is necessary in order to determine these shape parameters. It follows from the results of [4] that the problem of higher approximations to the solution of [1] coincides with the problem, of constructing a flow in the neighborhood of the center of a Laval nozzle with an analytic velocity distribution along the longitudinal axis (a Meyer-type flow). Along with the Meyer-type flow in the vicinity of the nozzle center, which corresponds to a self-similarity exponent n=2, two other types of flow are asymptotically possible with n=3 and 11, given in [5]. The appropriate solutions are written out in algebraic functions in [6]. The results of [5] show that the condition that the velocity vector be analytic on the limiting characteristic in the flow plane is broader than the condition that the stream function be analytic as a function of the hodographic variables, which is employed in [1, 2, 4]. Therefore, the necessity has arisen of reconsidering the problem of higher approximations for the obstacle solution of F. I. Frankl'. It has proved possible for the region in front of the shock waves to use a series which is more general than in [4], which implies the inclusion of an additional set of shape parameters. The solution is given in the hodograph plane in the form of the sum of two terms; the series discussed in [4] corresponds to the first one, and the series generated by the self-similar solution with n=3 or with n=11 corresponds to the second one.Translated from Zhurnal Prikladnoi Mekhaniki i Tekhnicheskoi Fiziki, No. 3, pp. 99–107, May–June, 1979.The authors thank S. V. Fal'kovich for a useful discussion.     

Flow in the neighborhood of the stagnation point of an axisymmetric wake

The solutions of the equations of parabolic type describing the development of the flow in an axisymmetric wake under the Influence of viscosity and an adverse pressure gradient are considered. It is then shown that in the general case in the neighborhood of the stagnation point on the axis of the wake the solution is a singular one, the possibility of its continuation beyond the stagnation point being excluded. The following solutions are also obtained: a regular solution in the neighborhood of the stagnation point and a singular solution continuable downstream. This singular solution is the limit for the class of regular solutions having a miniumum in the velocity distribution on the axis as the minimum velocity tends to zero.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 2, pp. 53–59, March–April, 1986.The author is grateful to V. Ya. Neiland and Vik. V. Sychev for discussing the results and offering useful advice.     

Propagation of perturbations upstream with interaction between a hypersonic flow and a boundary layer

It is shown that, for hypersonic flows with moderate and strong degrees of interaction, perturbations brought about, for example, by a bottom opening or by any other sort of obstacle are propagated up to the leading edge of a solid body. Local regions with very large pressure gradients cannot arise in the flow. This is connected with the possibility of the development of breakaway zones with a length on the order of magnitude of the size of the solid body, described in the first approximation by the equations of the boundary layer. From a mathematical point of view the problem comes down to establishing the nonsingular nature of the solution near the leading edge, and to finding eigensolutions which make it possible to satisfy the boundary conditions at the trailing edge of the solid body. It is shown that, with a weak interaction between the hypersonic flow and the boundary layer, there may arise short flow regions with free interaction and locally nonviscous flows with large pressure gradients, within the limits of which the perturbations may move upstream.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 4, pp. 40–49, July–August, 1970.In conclusion, the author thanks V. V. Sychev for his evaluation of the problem.     

Motion of triple configuration of shock waves with formation of wake behind branching point

If three developing shock-wave fronts come together at one point the laws of conservation connecting the parameters of the gas in the vicinity of this point give an overdetermined system of equations. To remove the possible contradiction it is necessary to increase the number of initial parameters. As a rule, the assumption of the presence of a contact discontinuity emerging from the branching point is sufficient. It is also possible for two contact discontinuities to develop which form two shock waves with respect to the branching point opposite the boundary of the isobaric region filled with gas in a state of rest. Such a region is called the wake of the triple point by analogy with the aerodynamic wake for flow around bodies with flow separation. A closed system of five simultaneous differential equations which describes approximately the dynamics of a stream containing a branched system of shock waves with a developing wake behind the triple point is derived and discussed in the report.Translated from Zhurnal Prikladnoi Mekhaniki i Tekhnicheskoi Fiziki, No. 6, pp. 67–75, November–December, 1973.     

Two-phase mass injection from the stagnation zone of a blunt body in a hypersonic flow

A mathematical model of the hypersonic steady gas flow over the stagnation zone of an axisymmetric blunt body with given two-phase injection from the surface is proposed. The two-continuum model of a dusty gas [3] is used for describing the flow in the region of the wall. The problem is solved in the boundary layer and thin viscous shock layer approximations. On the basis of the numerical calculations the distribution of the parameters of the carrier and dispersed phases near the axis of symmetry is obtained. The similarity parameters determining the convective heat transfer are found. The stagnation point heat fluxes with and without particles are compared. The range of parameters on which particles can significantly reduce the heat transfer is determined.Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No.4, pp. 60–66, July–August, 1992.     

Flow of a vortical stream in the neighborhood of the critical point

A study was made of the axisymmetric flow of a viscous incompressible fluid in the neighborhood of the critical point of an obstacle when steady-state vortices oriented in the direction of the angular coordinate are introduced into the oncoming flow. A solution is presented of the equation for the transfer of a vortex in the case of an external flow containing a single largesize vortex in the low-frequency part of the spectrum. Using a finite integral Hankel transform, the problem is reduced to the solution of a system of ordinary differential equations. It is shown that a sufficiently large-size vortex can have a considerable effect on the structure of viscous flow near an obstacle.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 6, pp. 85–89, November–December, 1970.     

Friction and heat transfer in an incompressible fluid near a plane stagnation point

In the neighborhood of a plane stagnation point, the flow and heat transfer of an incompressible fluid are studied. In the inner flow region, the velocity and pressure fields are described by the complete Navier-Stokes equations, and the temperature field is described by the complete energy equation. In the outer flow region, a two-term asymptotic solution of the corresponding equations is obtained. The problem is reduced to the numerical solution of ordinary differential equations. Numerical results are discussed.Moscow. Translated from Izvestiya Rossiiskoi Akademii Nauk, Mekhanika Zhidkosti i Gaza, No. 4, pp. 52–65, July–August, 1996.     

Effect of radiation on flow near stagnation point

We consider the problem of hypersonic flow about a blunt body with account for radiative energy transport. In the absence of absorption of radiation in the compressed layer, even for small optical thickness of the gas, as is known [1], physically incorrect solutions are obtained, since the gas enthalpy at the stagnation point on the body becomes zero. This takes place because the gas element on the zero streamline irradiates its energy completely. Naturally, the contradiction which arises in the absence of absorption must be resolved within the radiation scheme itself and is not removed, generally speaking, with the introduction of additional physical limitations.The flow of a radiating gas in the vicinity of the stagnation point is considered in [2, 3] using the simplest one-dimensional model. Under definite assumptions this flow is described by a single integrodifferential equation. However, account for gas absorption by expanding the integrand in a Taylor series in the vicinity of its local value, which is used in these studies, does not yield the possibility of obtaining a physically correct solution at the body. An analysis of this equation is made in the present paper.     

Investigation of a hypersonic viscous shock layer on rotating axisymmetric bodies in the presence of blowing

The hypersonic flow of a laminar stream of viscous compressible gas past blunt axisyrametric bodies rotating about the longitudinal axis is considered. It is assumed that gas blows from the surface of the body. The solution of the problem is obtained by a finite-difference method in a wide range of Reynolds numbers and blowing and rotation parameters. Some results of the calculations characterizing the effect of the rotation on the velocity and temperature profiles across the shock layer, on the friction and heat transfer coefficients, and the shock wave separation are given for the neighborhood of the stagnation point. For large Reynolds numbers and strong blowing an analytic solution of the problem is found in an approximation of two inviscid layers separated by a contact surface. The calculations are made for the flow past a sphere and a paraboloid and it is shown that in the presence of rotation the maximum of the heat flux is shifted from the stagnation point onto the side surface of the body. The dependence of the pressure distribution, the heat flux, and the friction coefficient is investigated for cases of constant and variable blowing over the contour of the body.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 1, pp. 106–114, January–February, 1986.     

Stability of two-dimensional flow near a stagnation point in the presence of massive blowing

In the framework of linear theory, a study is made of the stability of laminar flow in the boundary layer on a flat porous plate near a stagnation point in the presence of massive blowing. The problem is solved in the inviscid approximation. The neutral curves are calculated, and the values of the critical parameters and the position of the point at which stability is lost are determined. It is found that the extension of the region of laminar flow is directly proportional to the blowing velocity.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 2, pp. 157–158, March–April, 1982.     

Development of the temperature fields in an electric arc struck on a point electrode in a homogeneous gas stream

A study is made of the problem of a point electric source in a homogeneous gas stream and operating in the arc discharge regime. The development of an electric arc struck on a point cathode in a medium which moves without deformation is studied. The stationary problem of a two-dimensional electric arc that develops in a medium with piecewise constant electrical conductivity is solved. Expressions are obtained for the temperature fields, the thickness of the arc, the current-voltage characteristics, and the power in the arc. The stability of this stationary state with respect to short-wavelength perturbations is investigated. The critical electrical current at which instability commences is determined.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 2, pp. 91–99, March–April, 1981.I thank O. N. Sinkevich and I. M. Rutkevich for discussing the work, and also V. I. Grabovskii and V. A. Mareev for making some calculations.     

Boundary layer on a blunt body in a flow of dusty gas

The problem of interaction of gas-dust flows with solid surfaces arose in connection with the study of the motion of aircraft in a dusty atmosphere [1–2], the motion of a gas suspension in power generators, and in a number of other applications [3]. The presence of a disperse admixture may lead to a significant increase in the heat fluxes [4] and to erosion of the surface [5]. These phenomena are due to the joint influence of several factors — the change in the structure of the carrier-phase boundary layer due to the presence of the particles, collisions of the particles with the surface, roughness of the ablating surface, and so forth. This paper continues an investigation begun earlier [6–7] into the influence of particles on the structure of the dynamical and thermal two-phase boundary layer formed around a blunt body in a flow. The model of the dusty gas [8] has an incompressible carrier phase. The method of matched asymptotic expansions [9] is used to obtain the equations of the two-phase boundary layer. In the frame-work of the refined classification made by Stulov [6], it is shown that the form of the boundary layer equations is different in the presence and absence of inertial precipitation of the particles. The equations are solved numerically in the neighborhood of the stagnation point of the blunt body. The temperature and phase velocity distributions in the boundary layer, and also the friction coefficients and the heat transfer of the carrier phase are found for a wide range of the determining parameters. In the case of an admixture of low-inertia particles that are not precipitated on the body, it is shown that even when the mass concentration of the particles in the undisturbed flow is small their accumulation in the boundary layer can lead to a sharp increase in the thermal fluxes at the stagnation point.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 99–107, September–October, 1985.I thank V. P. Strulov for a discussion.     

Local modeling of the aerodynamic heating of the blunt body surface in subsonic high-enthalpy air flow. Theory and experiment on a high-frequency plasmatron

The concept of the local similarity of nonequilibrium boundary layers in high-enthalpy gas flows past blunt bodies is briefly described. The technical possibilities of the VGU-4 induction high-frequency plasmatron in modeling the aerodynamic heating of the hypothetical Pre-X (CNES) spacecraft in the vicinity of the stagnation point of a high-enthalpy air flow are presented. The engineering approach to quantitatively reproduce the thermochemical effect of a dissociated air flow on the vehicle surface in the high-heat region of the terrestrial entry trajectory is developed. In this approach the full-scale values of the total enthalpy, the stagnation pressure, and the velocity gradient at the stagnation point near the surface are reproduced in the experiment. The effective coefficients of O and N atom recombination on a silicone carbide (SiC) surface are determined under the conditions similar with those of the peak heating of the Pre-X vehicle surface in the vicinity of the flow stagnation point.