Optical band gap modification of single-walled carbon nanotubes by encapsulated fullerenes

We report optical band gap modifications of single-walled carbon nanotubes upon C60 insertions by using photoluminescence and the corresponding excitation spectroscopy. The shifts in optical transition energies strongly depend on the tube diameter (dt) and the "2n + m" family type, which can be explained by the local strain and the hybridization between the nanotube states and the C60 molecular orbitals. The present results provide possible design rules for nanotube-based heterostructures having a specific type of electronic functionality.     

Intercalant-induced superbundle formation of single-wall carbon nanotubes

The formation of a massive quantity of single-wall carbon nanotube (SWCNT) superbundles has been introduced through sonicating SWCNTs in tetramethylene sulfone/chloroform solution in which nitronium hexafluoroantimonate (NHFA) is dissolved. Most SWCNT bundles with the NHFA treatment are enlarged by about 10 times compared with those of the pristine sample. It is proposed that the formation of SWCNTs can occur in solution by formation of an SWCNT-intercalant charge complex. The specific surface area of the superbundle is almost doubled, while its micropore surface area is amplified by about 7 times. This development of microporosity results from the enhanced interstitial sites in the SWCNT superbundles.     

Tuning chirality of single-wall carbon nanotubes by selective etching with carbon dioxide

CO2 molecule chemisorbs selectively on the zigzag tube edge without an activation barrier, whereas it physisorbs on the armchair edge of nanotubes. In addition, carbon nanotubes can be etched by an adsorbed oxygen atom of CO2 molecule. From our results, we suggest a selective etching mechanism for tuning the chirality of the mass-produced carbon nanotubes.     

Fundamental properties of single-wall carbon nanotubes

Single-wall carbon nanotubes (SWCNTs) represent an excellent example of materials by design with many of their outstanding properties predicted by theory prior to their synthesis. Both experimental and theoretical work on these novel nanowires continue to increase at a breathtaking pace. Herein we describe some of their fundamental properties on which much of this work is built. After discussing their structure and symmetries, we emphasize their exceptional electronic properties. The standard one-parameter graphene sheet model of SWCNTs, introduced in the earliest published paper on extended SWCNTs, is discussed in terms of both its successes and limitations. The strong interplay between theory and experiment that this area has enjoyed is also discussed. In addition, several opportunities for further study are touched upon.     

Changes in the fluorescence spectrum of individual single-wall carbon nanotubes induced by light-assisted oxidation with hydroperoxide

Through fluorescence-spectrum measurements, we investigated the effects of light-assisted oxidation with H2O2 (LAOx) on single-wall carbon nanotubes (SWNTs) that were individually dispersed in an aqueous solution of surfactant. The intensities of the fluorescence spectra were decreased remarkably by the LAOx when the light's wavelength was 400-500 nm and a little when 600-700 nm. The spectrum intensity did not recover even when the pH was restored to an original value of 6.5. The spectra changed little when the LAOx wavelength was 500-600 nm or the light was not irradiated. In addition, the effect of LAOx on SWNTs was related to the diameters of SWNTs. We inferred that these phenomena reflected that H2O2 was dissociated by absorbing the fluorescence light emitted from optically excited SWNTs, which, in turn, accelerated the burning out of SWNTs.     

单壁碳纳米管对C-C键水解酶BphD的固定化性能

采用修饰与未修饰单壁碳纳米管固定C-C键水解酶BphD,并对固定化酶的相对活性、稳定性、重复使用性进行了考察.结果表明,未修饰单壁碳纳米管固定的BphD相对活性为游离态的52.5%,其热稳定性和在变性剂中的稳定性均有所提高,且重复使用10次仍可保持初始活力的90%.修饰单壁碳纳米管固定的BphD相对活性可达99.7%,但其稳定性没有明显提高.同源模建及分子对接分析结果显示,未修饰的单壁碳纳米管对BphD亚基之间的联系可能存在干扰作用,从而对其活性产生影响.     

Microwave-assisted sidewall functionalization of single-wall carbon nanotubes by Diels-Alder cycloaddition

The first Diels-Alder cycloaddition of o-quinodimethane to SWNT has been performed under microwave irradiation.     

Selective oxidation of semiconducting single-wall carbon nanotubes by hydrogen peroxide

Selective oxidation of single-wall carbon nanotubes (SWCNTs) by H2O2 was conducted at varying heating times and monitored by UV-vis-NIR spectroscopy. A major increase in the relative absorption intensity indicated a higher than 80% concentration of metallic SWCNTs in the final product. Here, it is suggested that semiconducting SWCNTs are more reactive than metallic SWCNTs because of hole-doping by H2O2, resulting in faster oxidation.     

Multifunctional molecular carbon materials--from fullerenes to carbon nanotubes

This critical review covers the timely topic of carbon nanostructures-fullerenes and carbon nanotubes-in combination with metalloporphyrins as integrative components for electron-donor-acceptor ensembles. These ensembles are typically probed in condensed media and at semi-transparent electrode surfaces. In particular, we will present a comprehensive survey of a variety of covalent (i.e., nanoconjugates) and non-covalent linkages (i.e., nanohybrids) to demonstrate how to govern/fine-tune the electronic interactions in the resulting electron-donor-acceptor ensembles. In the context of covalent bridges, different spacers will be discussed, which range from pure "insulators" (i.e., amide bonds, etc.) to sophisticated "molecular wires" (i.e., p-phenylenevinylene units, etc.). Furthermore, we will elucidate the fundamental impact that these vastly different spacers may exert on the rate, efficiency, and mechanism of short- and long-range electron transfer reactions. Additionally, a series of non-covalent motifs will be described: hydrogen bonding, complementary electrostatics, pi-pi stacking and metal coordination-to name a few. These motifs have been successfully employed by us and our collaborators en route towards novel architectures (i.e., linear structures, tubular structures, rotaxanes, catenanes, etc.) that exhibit unique and remarkable charge transfer features.     

Control of hole opening in single-wall carbon nanotubes and single-wall carbon nanohorns using oxygen

Due to the simplicity of the process, holes in the graphene walls of single-wall carbon nanotubes (SWNTs) and single-wall carbon nanohorns (SWNHs) have often been opened using O2 gas at high temperatures, even though this contaminates the nanotubes with carbonaceous dust (C-dust). To open holes with less C-dust contamination, we found that a slow temperature increase of 1 degrees C/min or less, in air, was effective. We also found that SWNHs having little C-dust could store a large quantity of materials inside the tubes. We infer that the local temperature increase due to the exothermic reaction of combustion may have been suppressed in the slow combustion process, which was effective in reducing the C-dust.     

Length-dependent optical effects in single-wall carbon nanotubes

Among the novel chemical and physical attributes of single-wall carbon nanotubes (SWCNTs), the optical properties are perhaps the most compelling. Although much is known about how such characteristics depend on nanotube chirality and diameter, relatively little is known about how the optical response depends on length, the next most obvious and fundamental nanotube trait. We show here that the intrinsic optical response of single-wall carbon nanotubes exhibits a strong dependence on nanotube length, and we offer a simple explanation that relates this behavior to the localization of a bound exciton along the length of a nanotube. The results presented here suggest that, for a given volume fraction, the longest nanotubes display significantly enhanced absorption, near-infrared fluorescence, and Raman scattering, which has important practical implications for potential applications that seek to exploit the unique optical characteristics of SWCNTs.     

Determination of moisture content of single-wall carbon nanotubes

Several techniques were evaluated for the establishment of reliable water/moisture content of single-wall carbon nanotubes. Karl Fischer titration (KF) provides a direct measure of the water content and was used for benchmarking against results obtained by conventional oven drying, desiccation over anhydrous magnesium perchlorate as well as by thermogravimetry and prompt gamma-ray activation analysis. Agreement amongst results was satisfactory with the exception of thermogravimetry, although care must be taken with oven drying as it is possible to register mass gain after an initial moisture loss if prolonged drying time or elevated temperatures (120 °C) are used. Thermogravimetric data were precise but a bias was evident that could be accounted for by considering the non-selective loss of mass as volatile carbonaceous components. Simple drying over anhydrous magnesium perchlorate for a minimum period of 8-10 days is recommended if KF is not available for this measurement.     

Solubilization of single-wall carbon nanotubes by supramolecular encapsulation of helical amylose

We have developed a simple, efficient process for solubilization of single-wall carbon nanotubes (SWNTs) with amylose in aqueous DMSO. This process requires two important conditions, presonication of SWNTs and subsequent amylose treatment in an optimum mixture of DMSO/H2O. The former step separates SWNT bundles, and the latter step provides a maximum cooperative interaction of SWNTs with amylose, leading to the immediate and complete solubilization. The best solvent condition for this is around 10-20% DMSO, in which amylose assumes a random conformation or an interrupted helix. This indicates that the amylose helix is not the prerequisite for encapsulation of SWNTs. The SEM and AFM images of the encapsulated SWNTs manifest loosely twisted ribbons wrapping around SWNTs, which are locally intertwined as a multiple twist, but no clumps of the host amylose are seen on SWNT capsules.     

Selective host-guest interaction of single-walled carbon nanotubes with functionalised fullerenes

Exohedrally functionalised fullerenes have been inserted in single-walled carbon nanotubes (SWNTs) with the aid of supercritical carbon dioxide to form peapods; C(61)(COOEt)(2) are encapsulated in SWNTs in high yield, whereas C(61)(COOH)(2) aggregate via hydrogen bonding to form a supramolecular complex, which sterically hinders encapsulation and causes it to adhere to the exterior surface of the SWNTs.     

Functionalised endohedral fullerenes in single-walled carbon nanotubes

Atomically thin carbon nanotubes serve as transparent-test tubes for individual molecules of functionalised endohedral fullerenes. Aberration-corrected transmission electron microscopy reveals the complex dynamic behaviour of these molecules at the atomic level, and it sheds light on the mechanism of their encapsulation into nanotubes.     

Azafullerenes encapsulated within single-walled carbon nanotubes

Methods of insertion of azafullerenes in single-walled carbon nanotubes (SWNTs) at different temperatures were investigated, while the effects of the conditions applied on the structure of azafullerene-based peapods, namely, C59N@SWNTs, were explored. Morphological characteristics of C59N@SWNTs were assessed and evaluated by means of high-resolution transmission electron microscopy (HR-TEM). Pathways and chemical reactions that occur upon encapsulation of C59N within SWNTs were evaluated. Monomeric azafullerenyl radical C59N. as inserted into SWNTs at high temperature, from purified (C59N)2 in the gas phase, can undergo a variety of different transformations forming dimers, oligomers or existing in its monomeric form inside SWNTs due to the stabilization effect by nanotube side walls. However, under milder conditions, that is, at lower temperature, bisazafullerene (C59N)2 can be inserted into SWNTs in its pristine dimeric form.     

Rectifying diodes from asymmetrically functionalized single-wall carbon nanotubes

Asymmetrically functionalized single-wall carbon nanotubes (SWNTs) have been prepared by a covalent reaction of an 11-mercaptoundecanol-modified Au surface with oxidized SWNT cylinders. While one end of the tubes is attached to gold substrate via ester groups, the free carboxylic substituents on the other end can be either ionized (CO2-) or esterified (CO2Et), creating a donor-acceptor asymmetric and acceptor-acceptor symmetric SWNT, respectively. Study of the SWNT monolayer conductance in Hg drop junction experiments reveals a pronounced diode-like behavior for donor-SWNT-acceptor junctions, while acceptor-SWNT-acceptor junctions are electrically symmetric.